Revision 1:e2c726c628dc, committed 2016-05-30

Comitter:

akashvibhute

Date:

Mon May 30 06:59:36 2016 +0000

Parent:

0:b85fd3fdfcfa

Commit message:

working library

Changed in this revision

diff -r b85fd3fdfcfa -r e2c726c628dc drv2665.cpp
--- a/drv2665.cpp	Wed May 25 03:17:20 2016 +0000
+++ b/drv2665.cpp	Mon May 30 06:59:36 2016 +0000
@@ -10,16 +10,35 @@
 #include "drv2665.h"
 #define M_PI 3.14159265358979
 
+static const uint8_t drv2665_sine_wave_form[] = {
+    0x00, 0x10, 0x20, 0x2e, 0x3c, 0x48, 0x53, 0x5b, 0x61, 0x65, 0x66,
+    0x65, 0x61, 0x5b, 0x53, 0x48, 0x3c, 0x2e, 0x20, 0x10,
+    0x00, 0xf0, 0xe0, 0xd2, 0xc4, 0xb8, 0xad, 0xa5, 0x9f, 0x9b, 0x9a,
+    0x9b, 0x9f, 0xa5, 0xad, 0xb8, 0xc4, 0xd2, 0xe0, 0xf0, 0x00,
+    0x10, 0x20, 0x2e, 0x3c, 0x48, 0x53, 0x5b, 0x61, 0x65, 0x66,
+    0x65, 0x61, 0x5b, 0x53, 0x48, 0x3c, 0x2e, 0x20, 0x10,
+    0x00, 0xf0, 0xe0, 0xd2, 0xc4, 0xb8, 0xad, 0xa5, 0x9f, 0x9b, 0x9a,
+    0x9b, 0x9f, 0xa5, 0xad, 0xb8, 0xc4, 0xd2, 0xe0, 0xf0, 0x00,
+    0x10, 0x20, 0x2e, 0x3c, 0x48, 0x53, 0x5b, 0x61, 0x65, 0x66,
+    0x65, 0x61, 0x5b, 0x53, 0x48, 0x3c, 0x2e, 0x20, 0x10,
+    0x00, 0xf0, 0xe0, 0xd2, 0xc4, 0xb8, 0xad, 0xa5, 0x9f, 0x9b, 0x9a,
+    0x9b, 0x9f, 0xa5, 0xad, 0xb8, 0xc4, 0xd2, 0xe0, 0xf0, 0x00,
+};
+
 DRV2665_DIGITAL::DRV2665_DIGITAL( PinName sda, PinName scl ):i2c_(sda, scl)
 {
+    i2c_.frequency(100000);
     i2c_addr = DRV2665_I2C_ADDRESS << 1;
     wait_ms(2); //wait 2ms for i2c bus
 }
 
 void DRV2665_DIGITAL::init(uint8_t output_gain, uint8_t idle_timeout)
 {
+    write(DRV2665_CTRL_2, DRV2665_DEV_RST); //reset
     write(DRV2665_CTRL_2, 0); //clear standby
-    write(DRV2665_CTRL_1, (DRV2665_DIGITAL_IN | output_gain)); //set mode digital, set gain
+    //write(DRV2665_CTRL_1, (DRV2665_DIGITAL_IN | output_gain)); //set mode digital, set gain
+    write(DRV2665_CTRL_1, DRV2665_DIGITAL_IN); //set mode digital, set gain
+    write(DRV2665_CTRL_1, DRV2665_100_VPP_GAIN); //set mode digital, set gain
     write(DRV2665_CTRL_2, idle_timeout); //set timeout period
 }
 
@@ -30,19 +49,39 @@
 
 void DRV2665_DIGITAL::outputWave(int8_t waveform[], uint8_t length)
 {
+    char reg;
+    char buff[100];
+    
+    buff[0] = DRV2665_FIFO;
+    length = 81;
+    
+    /*
+    for(int i=0; i<length; i++)
+        buff[i+1] = drv2665_sine_wave_form[i];
+    
+    //while(!fifo_check());
+    
+    i2c_.write(i2c_addr, buff, 42);
+    */
+    
     if(fifo_check()) {
+        //i2c_.write(i2c_addr, buff, 42);
+        
         for(int i=0; i<length; i++) {
-            write(DRV2665_FIFO, waveform[i]);
-            wait_us(5);
+            write(DRV2665_FIFO, drv2665_sine_wave_form[i]);
+            wait_us(20);
         }
+        
     } else
         return;
+        
 }
 
 void DRV2665_DIGITAL::outputSine(uint16_t hz)
 {
     int8_t waveform_byte;
     uint16_t length;
+    uint8_t repeat = 1;
 
     //in the linux driver example, a 41 byte waveform plays back at 8kHz
     //wavelength 41 -> wave time 125us -> frequency 8kHz
@@ -50,28 +89,27 @@
     //ie 41 bytes :: 8kHz -> 328 bytes :: 1000Hz
     //calculations done here are from this factor
 
-    length = (1000 * 328) / hz;
+    //length = (1000 * 328) / hz;
     
-    /*
+    
     //If the above assumption is incorrect, it could be that the DRV plays 
     //anything in its FIFO at a fix rate of 8ksps in that case, it would mean 
     //a per byte play time of 125us, ie for a 100byte wavelength -> a playback
-    //time of 1.25ms (800Hz)
-    //So, 100B :: 800Hz -> 100*800B :: 1Hz
-    //For 'n' Hz :: (100*800/n) B
+    //time of 12.5ms (80Hz)
+    //So, 100B :: 80Hz -> 100*80B :: 1Hz
+    //For 'n' Hz :: (100*80/n) B
 
-    length = (100 * 800) / hz;
-    */
+    length = (100 * 80) / hz;
     
     
-    for(int i=0; i<length; i++) {
-        waveform_byte = (uint8_t)(102.0 * sin(2*M_PI*i/(length-1))); //102 is the max +ve / -ve value, typecasting in uint8 turns -ve values into 2's complement required by the driver
-        
-        write(DRV2665_FIFO, waveform_byte);
-        wait_us(5);
+    for(int j=0; j<repeat; j++) {
 
-        while(!fifo_check())
-            wait_us(5);
+        for(int i=0; i<length; i++) {
+            waveform_byte = 100.0 * sin( 2*M_PI * i/(length-1) ); //102 is the max +ve / -ve value, typecasting in uint8 turns -ve values into 2's complement required by the driver
+
+            write(DRV2665_FIFO, (uint8_t)waveform_byte);
+            wait_us(20);
+        }
     }
 }
 
@@ -86,8 +124,13 @@
         return(false);
 }
 
-void DRV2665_DIGITAL::en_override(bool en)
+void DRV2665_DIGITAL::en_override(uint8_t en)
 {
+    char buff[2];
+    
+    buff[0] = DRV2665_BOOST_EN;
+    buff[1] = en;
+    
     write(DRV2665_CTRL_2, DRV2665_BOOST_EN);
 }
 

diff -r b85fd3fdfcfa -r e2c726c628dc drv2665.h
--- a/drv2665.h	Wed May 25 03:17:20 2016 +0000
+++ b/drv2665.h	Mon May 30 06:59:36 2016 +0000
@@ -39,7 +39,7 @@
 #define DRV2665_50_VPP_GAIN     0x01
 #define DRV2665_75_VPP_GAIN     0x02
 #define DRV2665_100_VPP_GAIN    0x03
-#define DRV2665_DIGITAL_IN      0x00
+#define DRV2665_DIGITAL_IN      0xfb //0x00
 #define DRV2665_ANALOG_IN       0x04 
 
 #define DRV2665_GAIN_RD_MASK    0x03
@@ -172,7 +172,7 @@
      *
      *  To override boot converter to be enabled indefinitely (-> true) or controlled by device logic (-> false)
      */
-    void en_override(bool en);
+    void en_override(uint8_t en);
     
 private:
     I2C i2c_;