PinDetect adds mechanical switch debouncing to DigitialIn and interrupt callbacks. More...

#include <PinDetect.h>

Public Member Functions
	PinDetect (PinName p)
	PinDetect constructor.
	PinDetect (PinName p, PinMode m)
	PinDetect constructor.
	~PinDetect ()
	PinDetect destructor.
void	setHoldRepeat (bool repeat)
	Set whether hold callback is repeatedly invoked while held.
void	setSampleFrequency (int i=PINDETECT_SAMPLE_PERIOD)
	Set the sampling time in microseconds.
void	setAssertValue (int i=PINDETECT_PIN_ASSTERED)
	Set the value used as assert.
void	setSamplesTillAssert (int i)
	Set the number of continuous samples until assert assumed.
void	setSamplesTillHeld (int i)
	Set the number of continuous samples until held assumed.
void	mode (PinMode m)
	Set the pin mode.
void	attach_asserted (void(*function)(void))
	Attach a callback function.
template<typename T >
void	attach_asserted (T object, void(T::member)(void))
	Attach a callback object/method.
void	attach_deasserted (void(*function)(void))
	Attach a callback function.
template<typename T >
void	attach_deasserted (T object, void(T::member)(void))
	Attach a callback object/method.
void	attach_asserted_held (void(*function)(void))
	Attach a callback function.
template<typename T >
void	attach_asserted_held (T object, void(T::member)(void))
	Attach a callback object/method.
void	attach_deasserted_held (void(*function)(void))
	Attach a callback function.
template<typename T >
void	attach_deasserted_held (T object, void(T::member)(void))
	Attach a callback object/method.
	operator int ()
	operator int()
Protected Member Functions
void	init (PinName p, PinMode m)
	initialise class
void	isr (void)
	The Ticker periodic callback function.

Detailed Description

PinDetect adds mechanical switch debouncing to DigitialIn and interrupt callbacks.

This is done by sampling the specified pin at regular intervals and detecting any change of state ( 0 -> 1 or 1 -> 0 ). When a state change is detected the attached callback handler is called. Additionally, if the pin stays in the same state after a state change for a defined period of time, an extra callback is made allowing a program to detect when a "key is pressed and held down" rather than a momentary key/switch press.

All parameters are customisable which include:-

The sampling frequency.
The number of continuous samples until a state change is detected.
The number of continuous samples until a key is assumed held after a state change.
The logic level which is assumed to be asserted (0volts or +volts).

Only callbacks that have been attached will be called by the library.

Example:

 #include "mbed.h"
 #include "PinDetect.h"

 PinDetect  pin( p30 );
 DigitialOut led1( LED1 );
 DigitialOut led2( LED2 );
 DigitialOut led3( LED3 );
 DigitialOut led4( LED4 );

 void keyPressed( void ) {
     led2 = 1;
     led3 = 0;
     led4 = 0;
 }

 void keyReleased( void ) {
     led2 = 0;
     led3 = 0;
     led4 = 0;
 }

 void keyPressedHeld( void ) {
     led3 = 1;
 }

 void keyReleasedHeld( void ) {
     led4 = 1;
 }

 int main() {

     pin.mode( PullDown );
     pin.attach_asserted( &keyPressed );
     pin.attach_deasserted( &keyReleased );
     pin.attach_asserted_held( &keyPressedHeld );
     pin.attach_deasserted_held( &keyReleasedHeld );

     // Sampling does not begin until you set a frequency.
     // The default is 20ms. If you want a different frequency
     // then pass the period in microseconds for example, for 10ms :-
     //     pin.setSampleFrequency( 10000 );
     //
     pin.setSampleFrequency(); // Defaults to 20ms.

     while( 1 ) {
         led1 = !led1;
         wait( 0.2 );
     }
 }

This example will flash led1 in a similar to a standard starting program.

Applying a "1" (switch on) to pin 30 will switch on led2, removing the "1" to "0" (switch off) led2 goes out. Holding the "switch" at one for one second will switch on led3. An unasserted P30 (switched off) will, after one second illuminate led4 when the deasserted calledback is called.

The above is a very basic introduction. For more details:-

See also:: example.h

Definition at line 130 of file PinDetect.h.

Constructor & Destructor Documentation

PinDetect ( PinName p )

PinDetect constructor.

By default the PinMode is set to PullDefault.

See also:: http://mbed.org/handbook/DigitalIn

Parameters:

p	PinName is a valid pin that supports DigitalIn

Definition at line 181 of file PinDetect.h.

PinDetect	(	PinName	p,
		PinMode	m
	)

PinDetect constructor.

See also:: http://mbed.org/handbook/DigitalIn

Parameters:

PinName	p is a valid pin that supports DigitalIn
PinMode	m The mode the DigitalIn should use.

Definition at line 191 of file PinDetect.h.

~PinDetect ( )

PinDetect destructor.

Definition at line 197 of file PinDetect.h.

Member Function Documentation

void attach_asserted ( void(*)(void) function )

Attach a callback function.

 DigitalOut led1( LED1 );
 PinDetect pin( p30 );

 void myCallback( void ) {
   led1 = 1;
 };
 
 main() {
     pin.attach_asserted( &myCallback );
 }

Call this function when a pin is asserted.

Parameters:

function A C function pointer

Definition at line 270 of file PinDetect.h.

void attach_asserted	(	T *	object,
		void(T::*)(void)	member
	)

Attach a callback object/method.

 class Bar {
   public:
     void myCallback( void ) { led1 = 1; }
 };

 DigitalOut led1( LED1 );
 PinDetect pin( p30 );
 Bar bar;

 main() {
     pin.attach_asserted( &bar, &Bar::myCallback );
 }

Call this function when a pin is asserted.

Parameters:

object	An object that conatins the callback method.
method	The method within the object to call.

Definition at line 298 of file PinDetect.h.

void attach_asserted_held ( void(*)(void) function )

Attach a callback function.

 DigitalOut led2( LED2 );
 PinDetect pin( p30 );

 void myCallback( void ) {
   led2 = 1;
 };

 main() {
     pin.attach_asserted_held( &myCallback );
 }

Call this function when a pin is asserted and held.

Parameters:

function A C function pointer

Definition at line 374 of file PinDetect.h.

void attach_asserted_held	(	T *	object,
		void(T::*)(void)	member
	)

Attach a callback object/method.

 class Bar {
   public:
     void myCallback( void ) { led2 = 0; }
 };

 DigitalOut led2( LED2 );
 PinDetect pin( p30 );
 Bar bar;
 
 main() {
     pin.attach_asserted_held( &bar, &Bar::myCallback );
 }

Call this function when a pin is asserted and held.

Parameters:

object	An object that conatins the callback method.
method	The method within the object to call.

Definition at line 402 of file PinDetect.h.

void attach_deasserted ( void(*)(void) function )

Attach a callback function.

 DigitalOut led1( LED1 );
 PinDetect pin( p30 );

 void myCallback( void ) {
   led1 = 0;
 };

 main() {
     pin.attach_deasserted( &myCallback );
 }

Call this function when a pin is deasserted.

Parameters:

function A C function pointer

Definition at line 322 of file PinDetect.h.

void attach_deasserted	(	T *	object,
		void(T::*)(void)	member
	)

Attach a callback object/method.

 class Bar {
   public:
     void myCallback( void ) { led1 = 0; }
 };

 DigitalOut led1( LED1 );
 PinDetect pin( p30 );
 Bar bar;
 
 main() {
     pin.attach_deasserted( &bar, &Bar::myCallback );
 }

Call this function when a pin is deasserted.

Parameters:

object	An object that conatins the callback method.
method	The method within the object to call.

Definition at line 350 of file PinDetect.h.

void attach_deasserted_held	(	T *	object,
		void(T::*)(void)	member
	)

Attach a callback object/method.

 class Bar {
   public:
     void myCallback( void ) { led3 = 0; }
 };

 DigitalOut led3( LED3 );
 PinDetect pin( p30 );
 Bar bar;
 
 main() {
     pin.attach_deasserted_held( &bar, &Bar::myCallback );
 }

Call this function when a pin is deasserted and held.

Parameters:

object	An object that conatins the callback method.
method	The method within the object to call.

Definition at line 454 of file PinDetect.h.

void attach_deasserted_held ( void(*)(void) function )

Attach a callback function.

 DigitalOut led3( LED3 );
 PinDetect pin( p30 );

 void myCallback( void ) {
   led3 = 1;
 };

 main() {
     pin.attach_deasserted_held( &myCallback );
 }

Call this function when a pin is deasserted and held.

Parameters:

function A C function pointer

Definition at line 426 of file PinDetect.h.

void init	(	PinName	p,
		PinMode	m
	)		`[protected]`

initialise class

Parameters:

PinName	p is a valid pin that supports DigitalIn
PinMode	m The mode the DigitalIn should use.

Definition at line 154 of file PinDetect.h.

void isr ( void ) [protected]

The Ticker periodic callback function.

Definition at line 467 of file PinDetect.h.

void mode ( PinMode m )

Set the pin mode.

See also:: http://mbed.org/projects/libraries/api/mbed/trunk/DigitalInOut#DigitalInOut.mode

Parameters:

PinMode m The mode to pass on to the DigitalIn

Definition at line 248 of file PinDetect.h.

operator int ( )

operator int()

Read the value of the pin being sampled.

Definition at line 462 of file PinDetect.h.

void setAssertValue ( int i = PINDETECT_PIN_ASSTERED )

Set the value used as assert.

Defaults to 1 (ie if pin == 1 then pin asserted).

Parameters:

int	New assert value (1 or 0)

Definition at line 225 of file PinDetect.h.

void setHoldRepeat ( bool repeat )

Set whether hold callback is repeatedly invoked while held.

Parameters:

bool	true to repeat callback, false to call back only once

Definition at line 206 of file PinDetect.h.

void setSampleFrequency ( int i = PINDETECT_SAMPLE_PERIOD )

Set the sampling time in microseconds.

Parameters:

int	The time between pin samples in microseconds.

Definition at line 213 of file PinDetect.h.

void setSamplesTillAssert ( int i )

Set the number of continuous samples until assert assumed.

Defaults to 1 (1 * sample frequency).

Parameters:

int	The number of continuous samples until assert assumed.

Definition at line 233 of file PinDetect.h.

void setSamplesTillHeld ( int i )

Set the number of continuous samples until held assumed.

Defaults to 50 * sample frequency.

Parameters:

int	The number of continuous samples until held assumed.

Definition at line 241 of file PinDetect.h.

Type:	Library
Created:	20 Sep 2015
Imports:	0
Forks:	0
Commits:	4
Dependents:	0
Dependencies:	0
Followers:	1

PinDetect Class Reference

Public Member Functions

Protected Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Repository toolbox

Repository details

Important Information for this Arm website

PinDetect Class Reference

Public Member Functions

Protected Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning