USB Serial application
Fork of USBSerial_HelloWorld by
mbed-dev/targets/TARGET_STM/TARGET_STM32F2/objects.h
- Committer:
- Zaitsev
- Date:
- 2017-01-10
- Revision:
- 10:41552d038a69
File content as of revision 10:41552d038a69:
/* mbed Microcontroller Library ******************************************************************************* * Copyright (c) 2016, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ #ifndef MBED_OBJECTS_H #define MBED_OBJECTS_H #include "cmsis.h" #include "PortNames.h" #include "PeripheralNames.h" #include "PinNames.h" #ifdef __cplusplus extern "C" { #endif struct gpio_irq_s { IRQn_Type irq_n; uint32_t irq_index; uint32_t event; PinName pin; }; struct port_s { PortName port; uint32_t mask; PinDirection direction; __IO uint32_t *reg_in; __IO uint32_t *reg_out; }; struct analogin_s { ADCName adc; PinName pin; uint8_t channel; }; struct dac_s { DACName dac; uint8_t channel; }; struct serial_s { UARTName uart; int index; // Used by irq uint32_t baudrate; uint32_t databits; uint32_t stopbits; uint32_t parity; PinName pin_tx; PinName pin_rx; #if DEVICE_SERIAL_ASYNCH uint32_t events; #endif #if DEVICE_SERIAL_FC uint32_t hw_flow_ctl; PinName pin_rts; PinName pin_cts; #endif }; struct spi_s { SPI_HandleTypeDef handle; IRQn_Type spiIRQ; SPIName spi; PinName pin_miso; PinName pin_mosi; PinName pin_sclk; PinName pin_ssel; #ifdef DEVICE_SPI_ASYNCH uint32_t event; uint8_t transfer_type; #endif }; struct i2c_s { /* The 1st 2 members I2CName i2c * and I2C_HandleTypeDef handle should * be kept as the first members of this struct */ I2CName i2c; I2C_HandleTypeDef handle; uint8_t index; int hz; PinName sda; PinName scl; IRQn_Type event_i2cIRQ; IRQn_Type error_i2cIRQ; uint8_t XferOperation; volatile uint8_t event; #if DEVICE_I2CSLAVE uint8_t slave; volatile uint8_t pending_slave_tx_master_rx; volatile uint8_t pending_slave_rx_maxter_tx; #endif #if DEVICE_I2C_ASYNCH uint32_t address; uint8_t stop; uint8_t available_events; #endif }; struct pwmout_s { PWMName pwm; PinName pin; uint32_t period; uint32_t pulse; uint8_t channel; uint8_t inverted; }; struct can_s { CANName can; int index; }; #include "gpio_object.h" #ifdef __cplusplus } #endif #endif