USB Serial application
Fork of USBSerial_HelloWorld by
Diff: mbed-dev/targets/TARGET_STM/TARGET_STM32F2/objects.h
- Revision:
- 10:41552d038a69
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev/targets/TARGET_STM/TARGET_STM32F2/objects.h Tue Jan 10 20:42:26 2017 +0000 @@ -0,0 +1,148 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2016, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_OBJECTS_H +#define MBED_OBJECTS_H + +#include "cmsis.h" +#include "PortNames.h" +#include "PeripheralNames.h" +#include "PinNames.h" + +#ifdef __cplusplus +extern "C" { +#endif + +struct gpio_irq_s { + IRQn_Type irq_n; + uint32_t irq_index; + uint32_t event; + PinName pin; +}; + +struct port_s { + PortName port; + uint32_t mask; + PinDirection direction; + __IO uint32_t *reg_in; + __IO uint32_t *reg_out; +}; + +struct analogin_s { + ADCName adc; + PinName pin; + uint8_t channel; +}; + +struct dac_s { + DACName dac; + uint8_t channel; +}; + +struct serial_s { + UARTName uart; + int index; // Used by irq + uint32_t baudrate; + uint32_t databits; + uint32_t stopbits; + uint32_t parity; + PinName pin_tx; + PinName pin_rx; +#if DEVICE_SERIAL_ASYNCH + uint32_t events; +#endif +#if DEVICE_SERIAL_FC + uint32_t hw_flow_ctl; + PinName pin_rts; + PinName pin_cts; +#endif +}; + +struct spi_s { + SPI_HandleTypeDef handle; + IRQn_Type spiIRQ; + SPIName spi; + PinName pin_miso; + PinName pin_mosi; + PinName pin_sclk; + PinName pin_ssel; +#ifdef DEVICE_SPI_ASYNCH + uint32_t event; + uint8_t transfer_type; +#endif +}; + +struct i2c_s { + /* The 1st 2 members I2CName i2c + * and I2C_HandleTypeDef handle should + * be kept as the first members of this struct + */ + I2CName i2c; + I2C_HandleTypeDef handle; + uint8_t index; + int hz; + PinName sda; + PinName scl; + IRQn_Type event_i2cIRQ; + IRQn_Type error_i2cIRQ; + uint8_t XferOperation; + volatile uint8_t event; +#if DEVICE_I2CSLAVE + uint8_t slave; + volatile uint8_t pending_slave_tx_master_rx; + volatile uint8_t pending_slave_rx_maxter_tx; +#endif +#if DEVICE_I2C_ASYNCH + uint32_t address; + uint8_t stop; + uint8_t available_events; +#endif +}; + +struct pwmout_s { + PWMName pwm; + PinName pin; + uint32_t period; + uint32_t pulse; + uint8_t channel; + uint8_t inverted; +}; + +struct can_s { + CANName can; + int index; +}; + +#include "gpio_object.h" + +#ifdef __cplusplus +} +#endif + +#endif