Wooden Jin / BLDC_V2

bldc driver firmware based on hobbyking cheetah compact

Dependencies:   BLDC_V2 mbed-dev-f303 FastPWM3

Dependents:   BLDC_V2

Config/current_controller_config.h

Committer:
Wooden
Date:
2020-05-13
Revision:
47:f4ecf3e0576a
Parent:
44:efcde0af8390
Child:
48:a74e401a6d84

File content as of revision 47:f4ecf3e0576a:

#ifndef CURRENT_CONTROLLER_CONFIG_H
#define CURRENT_CONTROLLER_CONFIG_H

// Current controller///
#define K_D .05f                    // Loop gain,  Volts/Amp
#define K_Q .05f                    // Loop gain,  Volts/Amp
//#define K_SCALE 0.0001f             // K_loop/Loop BW (Hz) 0.0042
#define K_SCALE 0.00165f
// #define K_SCALE 0.0008
//#define K_SCALE 0.0004
#define KI_D 0.0255f                // PI zero, in radians per sample
#define KI_Q 0.0255f                // PI zero, in radians per sample
#define V_BUS 24.0f                 // Volts
#define OVERMODULATION 1.2f         // 1.0 = no overmodulation

#define D_INT_LIM V_BUS/(K_D*KI_D)  // Amps*samples
#define Q_INT_LIM V_BUS/(K_Q*KI_Q)  // Amps*samples

#define I_MAX 40.0f

//Observer//
#define DT 0.000025f
#define K_O 0.02f




#endif