Diff: RA8875.h

Revision:

54:e117ad10fba6

Parent:

53:86d24b9480b9

Child:

55:dfbabef7003e

--- a/RA8875.h	Mon Mar 17 11:29:40 2014 +0000
+++ b/RA8875.h	Sun Mar 23 17:35:14 2014 +0000
@@ -121,6 +121,13 @@
         FloatingWindow      ///< Floating Window mode
     } LayerMode_T;
     
+    /// Touch Panel modes
+    typedef enum
+    {
+        TP_Auto,               ///< Auto touch detection mode
+        TP_Manual,             ///< Manual touch detection mode
+    } tpmode_t;
+    
     /// Constructor for a display based on the RAiO RA8875 
     /// display controller.
     ///
@@ -192,7 +199,86 @@
     /// @returns success/failure code. @see RetCode_t.
     ///
     RetCode_t SetBackgroundTransparencyColor(color_t color = RGB(0,0,0));
+ 
+    /// Initialize theTouch Panel controller with default values 
+    ///
+    /// @returns success/failure code. @see RetCode_t.   
+    RetCode_t TouchPanelInit(void);
+        
+    /// Initialize the Touch Panel controller with detailed settings.
+    ///
+    ///
+    /// @param[in]  bTpEnable           Touch Panel enable/disable control:
+    ///                                 - TP_ENABLE: enable the touch panel
+    ///                                 - TP_DISABLE: disable the touch panel
+    ///             bTpAutoManual       Touch Panel operating mode:
+    ///                                 - TP_MODE_AUTO: automatic capture
+    ///                                 - TP_MODE_MANUAL: manual capture
+    ///             bTpDebounce         Debounce circuit enable for touch panel interrupt:
+    ///                                 - TP_DEBOUNCE_OFF: disable the debounce circuit
+    ///                                 - TP_DEBOUNCE_ON: enable the debounce circuit     
+    ///             bTpManualMode       When Manual Mode is selected, this sets the mode:
+    ///                                 - TP_MANUAL_IDLE: touch panel is idle   
+    ///                                 - TP_MANUAL_WAIT: wait for touch panel event   
+    ///                                 - TP_MANUAL_LATCH_X: latch X data  
+    ///                                 - TP_MANUAL_LATCH_Y: latch Y data   
+    ///             bTpAdcClkDiv        Sets the ADC clock as a fraction of the System CLK:
+    ///                                 - TP_ADC_CLKDIV_1: Use CLK   
+    ///                                 - TP_ADC_CLKDIV_2: Use CLK/2   
+    ///                                 - TP_ADC_CLKDIV_4: Use CLK/4   
+    ///                                 - TP_ADC_CLKDIV_8: Use CLK/8   
+    ///                                 - TP_ADC_CLKDIV_16: Use CLK/16   
+    ///                                 - TP_ADC_CLKDIV_32: Use CLK/32   
+    ///                                 - TP_ADC_CLKDIV_64: Use CLK/64   
+    ///                                 - TP_ADC_CLKDIV_128: Use CLK/128   
+    ///             bTpAdcSampleTime    Touch Panel sample time delay before ADC data is ready:
+    ///                                 - TP_ADC_SAMPLE_512_CLKS: Wait 512 system clocks   
+    ///                                 - TP_ADC_SAMPLE_1024_CLKS: Wait 1024 system clocks   
+    ///                                 - TP_ADC_SAMPLE_2048_CLKS: Wait 2048 system clocks   
+    ///                                 - TP_ADC_SAMPLE_4096_CLKS: Wait 4096 system clocks   
+    ///                                 - TP_ADC_SAMPLE_8192_CLKS: Wait 8192 system clocks   
+    ///                                 - TP_ADC_SAMPLE_16384_CLKS: Wait 16384 system clocks   
+    ///                                 - TP_ADC_SAMPLE_32768_CLKS: Wait 32768 system clocks   
+    ///                                 - TP_ADC_SAMPLE_65536_CLKS: Wait 65536 system clocks
+    /// @returns success/failure code. @see RetCode_t.         
+    RetCode_t TouchPanelInit(uint8_t bTpEnable, uint8_t bTpAutoManual, uint8_t bTpDebounce, uint8_t bTpManualMode, uint8_t bTpAdcClkDiv, uint8_t bTpAdcSampleTime);
     
+    /// Poll the TouchPanel and on a touch event return the filtered x, y coordinates.
+    ///
+    /// @param x,y  
+    unsigned char TouchPanelRead(loc_t *x, loc_t *y);
+
+    /// Poll the TouchPanel and on a touch event return the raw x, y coordinates.
+    ///
+    /// @param x,y
+    unsigned char TouchPanelReadRaw(loc_t *x, loc_t *y);
+    
+    /// Append interrupt handler for specific RA8875 interrupt source
+    ///
+    /// @param[in]    bISRType        Interrupt Source, should be:
+    ///                                - RA8875_INT_KEYSCAN: KEYCAN interrupt
+    ///                                - RA8875_INT_DMA: DMA interrupt
+    ///                                - RA8875_INT_TP: Touch panel interrupt
+    ///                                - RA8875_INT_BTE: BTE process complete interrupt
+    ///                                - RA8875_INT_BTEMCU_FONTWR: Multi-purpose interrupt (see spec sheet)   
+    ///                               
+    /// @return       none
+    ///
+    void AppendISR(uint8_t bISRType, void(*fptr)(void));
+
+    /// Unappend interrupt handler for specific RA8875 interrupt source
+    ///
+    /// @param[in]    bISRType        Interrupt Source, should be:
+    ///                                - RA8875_INT_KEYSCAN: KEYCAN interrupt
+    ///                                - RA8875_INT_DMA: DMA interrupt
+    ///                                - RA8875_INT_TP: Touch panel interrupt
+    ///                                - RA8875_INT_BTE: BTE process complete interrupt
+    ///                                - RA8875_INT_BTEMCU_FONTWR: Multi-purpose interrupt (see spec sheet)   
+    ///                               
+    /// @return       none
+    ///
+    void UnAppendISR(uint8_t bISRType);
+
     /// Write a command to the display with a word of data.
     ///
     /// This is a high level command, and may invoke several primitives.
@@ -943,7 +1029,76 @@
     void ReportPerformance(Serial & pc);
 #endif
 
+// Touch Panel public macros
+
+/* Touch Panel Enable/Disable Reg TPCR0[7] */
+#define TP_ENABLE   ((uint8_t)(1<<7))
+#define TP_DISABLE  ((uint8_t)(0<<7))
+
+/* Touch Panel operating mode Reg TPCR1[6] */
+#define TP_MODE_AUTO    ((uint8_t)(0<<6))   
+#define TP_MODE_MANUAL  ((uint8_t)(1<<6))
+
+/* Touch Panel debounce Reg TPCR1[2]    */
+#define TP_DEBOUNCE_OFF ((uint8_t)(0<<2))
+#define TP_DEBOUNCE_ON  ((uint8_t)(1<<2))
+
+/* Touch Panel manual modes Reg TPCR1[1:0]  */
+#define TP_MANUAL_IDLE      0
+#define TP_MANUAL_WAIT      1
+#define TP_MANUAL_LATCH_X   2
+#define TP_MANUAL_LATCH_Y   3
+
+/* Touch Panel ADC Clock modes Reg TPCR0[2:0] */
+#define TP_ADC_CLKDIV_1            0
+#define TP_ADC_CLKDIV_2            1        
+#define TP_ADC_CLKDIV_4            2        
+#define TP_ADC_CLKDIV_8            3      
+#define TP_ADC_CLKDIV_16           4        
+#define TP_ADC_CLKDIV_32           5        
+#define TP_ADC_CLKDIV_64           6        
+#define TP_ADC_CLKDIV_128          7
+        
+
+/* Touch Panel Sample Time Reg TPCR0[6:4] */
+#define TP_ADC_SAMPLE_512_CLKS     ((uint8_t)(0<<4))
+#define TP_ADC_SAMPLE_1024_CLKS    ((uint8_t)(1<<4))
+#define TP_ADC_SAMPLE_2048_CLKS    ((uint8_t)(2<<4))
+#define TP_ADC_SAMPLE_4096_CLKS    ((uint8_t)(3<<4))
+#define TP_ADC_SAMPLE_8192_CLKS    ((uint8_t)(4<<4))
+#define TP_ADC_SAMPLE_16384_CLKS   ((uint8_t)(5<<4))
+#define TP_ADC_SAMPLE_32768_CLKS   ((uint8_t)(6<<4))
+#define TP_ADC_SAMPLE_65536_CLKS   ((uint8_t)(7<<4))
+
+/* RA8875 interrupt enable/flag/clear masks */
+#define RA8875_INT_KEYSCAN          ((uint8_t)(1<<4))    /**< KEYSCAN interrupts  */
+#define RA8875_INT_DMA              ((uint8_t)(1<<3))    /**< DMA interrupts  */
+#define RA8875_INT_TP               ((uint8_t)(1<<2))    /**< Touch panel interrupts  */
+#define RA8875_INT_BTE              ((uint8_t)(1<<1))    /**< BTE process complete interrupts  */
+#define RA8875_INT_BTEMCU_FONTWR    ((uint8_t)(1<<0))    /**< BTE-MCU-R/W or Font-Write interrupts  */
+
+
 private:
+    /// Touch Panel register name definitions
+#define TPCR0   0x70
+#define TPCR1   0x71
+#define TPXH    0x72
+#define TPYH    0x73
+#define TPXYL   0x74
+#define INTC1   0xF0
+#define INTC2   0xF1
+
+    /// Specify the default settings for the Touch Panel, where different from the chip defaults
+#define TP_MODE_DEFAULT             TP_MODE_AUTO
+#define TP_DEBOUNCE_DEFAULT         TP_DEBOUNCE_ON
+#define TP_ADC_CLKDIV_DEFAULT       TP_ADC_CLKDIV_8
+
+#define TP_ADC_SAMPLE_DEFAULT_CLKS  TP_ADC_SAMPLE_8192_CLKS
+
+    /// Other Touch Panel params
+#define TPBUFSIZE   16       // Depth of the averaging buffers for x and y data
+
+
     /// Set the SPI port frequency (in Hz).
     ///
     /// @note attempts to call this API at runtime, with the display