Wajahat Abbas
ublox-cellular-base_R4_PR
Revision 33:64b96bdac04e, committed 2019-09-23
- Comitter:
- wajahat.abbas@u-blox.com
- Date:
- Mon Sep 23 14:29:32 2019 +0500
- Parent:
- 32:d961d0c06cdf
- Commit message:
- Default mno profile to 100, PSM is disabled for R410M
Changed in this revision
diff -r d961d0c06cdf -r 64b96bdac04e UbloxCellularBase.cpp
--- a/UbloxCellularBase.cpp Thu Sep 05 15:46:11 2019 +0500
+++ b/UbloxCellularBase.cpp Mon Sep 23 14:29:32 2019 +0500
@@ -841,6 +841,8 @@
} else if (_psm_status == ENABLED && !_func_psm_going_in){
tr_critical("!!PSM IS ENABLED, CALLBACK NOT ATTACHED. PLEASE REGISTER ONE!!");
}
+#elif TARGET_UBLOX_C030_R410M
+ disable_psm(); //PSM is currently not supported by driver for R410M due to lack of URCs
#endif
if (_at->is_idle_mode_enabled() == false) {
set_idle_mode(false); //disable idle mode at start up
@@ -1303,7 +1305,7 @@
bool return_val = false;
int current_profile;
MNOProfile arr[MAX_NUM_PROFILES] = { SW_DEFAULT, SIM_ICCID, ATT, TMO, VODAFONE, DT, STANDARD_EU
-#ifdef TARGET_UBLOX_C030_R410M
+#ifdef TARGET_UBLOX_C030_R410M
, VERIZON, TELSTRA, CT, SPRINT, TELUS
#endif
};
@@ -1591,8 +1593,22 @@
return status;
}
+
+bool UbloxCellularBase::disable_psm()
+{
+ bool return_value = false;
+
+ LOCK();
+ if (_at->send("AT+CPSMS=0") && _at->recv("OK")) {
+ return_value = true;
+ }
+ UNLOCK();
+
+ return return_value;
+}
#endif //TARGET_UBLOX_C030_R41XM
+
#ifdef TARGET_UBLOX_C030_R412M
bool UbloxCellularBase::get_power_saving_mode(int *status, int *periodic_time, int *active_time)
{
@@ -1715,133 +1731,129 @@
int at_timeout = _at_timeout;
at_set_timeout(10000); //AT+CPSMS has response time of < 10s
- //check if modem supports PSM URCs
- if (_at->send("AT+UPSMR?") && _at->recv("OK")) {
- if (periodic_time == 0 && active_time == 0) {
- // disable PSM
- if (_at->send("AT+CPSMS=0") && _at->recv("OK")) {
- if (set_psm_urcs(false)) {//disable the URC
- //de-register the callback
- detach_cb_psm_going_in();
- detach_cb_psm_coming_out();
- _psm_status = DISABLED;
- return_val = true;
- }
- }
- } else { //PSM string encoding code borrowed from AT_CellularPower.cpp
- /**
- Table 10.5.163a/3GPP TS 24.008: GPRS Timer 3 information element
+ if (periodic_time == 0 && active_time == 0) {
+ // disable PSM
+ if (_at->send("AT+CPSMS=0") && _at->recv("OK")) {
+ set_psm_urcs(false); //disable the URC
+ _psm_status = DISABLED;
+ return_val = true;
+ }
+ } else if (_at->send("AT+UPSMR?") && _at->recv("OK")) { //PSM string encoding code borrowed from AT_CellularPower.cpp
+ /**
+ Table 10.5.163a/3GPP TS 24.008: GPRS Timer 3 information element
- Bits 5 to 1 represent the binary coded timer value.
+ Bits 5 to 1 represent the binary coded timer value.
- Bits 6 to 8 defines the timer value unit for the GPRS timer as follows:
- 8 7 6
- 0 0 0 value is incremented in multiples of 10 minutes
- 0 0 1 value is incremented in multiples of 1 hour
- 0 1 0 value is incremented in multiples of 10 hours
- 0 1 1 value is incremented in multiples of 2 seconds
- 1 0 0 value is incremented in multiples of 30 seconds
- 1 0 1 value is incremented in multiples of 1 minute
- 1 1 0 value is incremented in multiples of 320 hours (NOTE 1)
- 1 1 1 value indicates that the timer is deactivated (NOTE 2).
- */
- char pt[8+1];// timer value encoded as 3GPP IE
- const int ie_value_max = 0x1f;
- uint32_t periodic_timer = 0;
- if (periodic_time <= 2*ie_value_max) { // multiples of 2 seconds
- periodic_timer = periodic_time/2;
- strcpy(pt, "01100000");
+ Bits 6 to 8 defines the timer value unit for the GPRS timer as follows:
+ 8 7 6
+ 0 0 0 value is incremented in multiples of 10 minutes
+ 0 0 1 value is incremented in multiples of 1 hour
+ 0 1 0 value is incremented in multiples of 10 hours
+ 0 1 1 value is incremented in multiples of 2 seconds
+ 1 0 0 value is incremented in multiples of 30 seconds
+ 1 0 1 value is incremented in multiples of 1 minute
+ 1 1 0 value is incremented in multiples of 320 hours (NOTE 1)
+ 1 1 1 value indicates that the timer is deactivated (NOTE 2).
+ */
+ char pt[8+1];// timer value encoded as 3GPP IE
+ const int ie_value_max = 0x1f;
+ uint32_t periodic_timer = 0;
+ if (periodic_time <= 2*ie_value_max) { // multiples of 2 seconds
+ periodic_timer = periodic_time/2;
+ strcpy(pt, "01100000");
+ } else {
+ if (periodic_time <= 30*ie_value_max) { // multiples of 30 seconds
+ periodic_timer = periodic_time/30;
+ strcpy(pt, "10000000");
} else {
- if (periodic_time <= 30*ie_value_max) { // multiples of 30 seconds
- periodic_timer = periodic_time/30;
- strcpy(pt, "10000000");
+ if (periodic_time <= 60*ie_value_max) { // multiples of 1 minute
+ periodic_timer = periodic_time/60;
+ strcpy(pt, "10100000");
} else {
- if (periodic_time <= 60*ie_value_max) { // multiples of 1 minute
- periodic_timer = periodic_time/60;
- strcpy(pt, "10100000");
+ if (periodic_time <= 10*60*ie_value_max) { // multiples of 10 minutes
+ periodic_timer = periodic_time/(10*60);
+ strcpy(pt, "00000000");
} else {
- if (periodic_time <= 10*60*ie_value_max) { // multiples of 10 minutes
- periodic_timer = periodic_time/(10*60);
- strcpy(pt, "00000000");
+ if (periodic_time <= 60*60*ie_value_max) { // multiples of 1 hour
+ periodic_timer = periodic_time/(60*60);
+ strcpy(pt, "00100000");
} else {
- if (periodic_time <= 60*60*ie_value_max) { // multiples of 1 hour
- periodic_timer = periodic_time/(60*60);
- strcpy(pt, "00100000");
- } else {
- if (periodic_time <= 10*60*60*ie_value_max) { // multiples of 10 hours
- periodic_timer = periodic_time/(10*60*60);
- strcpy(pt, "01000000");
- } else { // multiples of 320 hours
- int t = periodic_time / (320*60*60);
- if (t > ie_value_max) {
- t = ie_value_max;
- }
- periodic_timer = t;
- strcpy(pt, "11000000");
+ if (periodic_time <= 10*60*60*ie_value_max) { // multiples of 10 hours
+ periodic_timer = periodic_time/(10*60*60);
+ strcpy(pt, "01000000");
+ } else { // multiples of 320 hours
+ int t = periodic_time / (320*60*60);
+ if (t > ie_value_max) {
+ t = ie_value_max;
}
+ periodic_timer = t;
+ strcpy(pt, "11000000");
}
}
}
}
}
+ }
- uint_to_binary_str(periodic_timer, &pt[3], sizeof(pt)-3, 5);
- pt[8] = '\0';
+ uint_to_binary_str(periodic_timer, &pt[3], sizeof(pt)-3, 5);
+ pt[8] = '\0';
+
+ /**
+ Table 10.5.172/3GPP TS 24.008: GPRS Timer information element
- /**
- Table 10.5.172/3GPP TS 24.008: GPRS Timer information element
+ Bits 5 to 1 represent the binary coded timer value.
+
+ Bits 6 to 8 defines the timer value unit for the GPRS timer as follows:
- Bits 5 to 1 represent the binary coded timer value.
-
- Bits 6 to 8 defines the timer value unit for the GPRS timer as follows:
+ 8 7 6
+ 0 0 0 value is incremented in multiples of 2 seconds
+ 0 0 1 value is incremented in multiples of 1 minute
+ 0 1 0 value is incremented in multiples of decihours
+ 1 1 1 value indicates that the timer is deactivated.
- 8 7 6
- 0 0 0 value is incremented in multiples of 2 seconds
- 0 0 1 value is incremented in multiples of 1 minute
- 0 1 0 value is incremented in multiples of decihours
- 1 1 1 value indicates that the timer is deactivated.
+ Other values shall be interpreted as multiples of 1 minute in this version of the protocol.
+ */
+ char at[8+1];
+ uint32_t active_timer; // timer value encoded as 3GPP IE
+ if (active_time <= 2*ie_value_max) { // multiples of 2 seconds
+ active_timer = active_time/2;
+ strcpy(at, "00000000");
+ } else {
+ if (active_time <= 60*ie_value_max) { // multiples of 1 minute
+ active_timer = (1<<5) | (active_time/60);
+ strcpy(at, "00100000");
+ } else { // multiples of decihours
+ int t = active_time / (6*60);
+ if (t > ie_value_max) {
+ t = ie_value_max;
+ }
+ active_timer = t;
+ strcpy(at, "01000000");
+ }
+ }
- Other values shall be interpreted as multiples of 1 minute in this version of the protocol.
- */
- char at[8+1];
- uint32_t active_timer; // timer value encoded as 3GPP IE
- if (active_time <= 2*ie_value_max) { // multiples of 2 seconds
- active_timer = active_time/2;
- strcpy(at, "00000000");
+ uint_to_binary_str(active_timer, &at[3], sizeof(at)-3, 5);
+ at[8] = '\0';
+
+ if (_at->send("AT+CPSMS=1,,,\"%s\",\"%s\"", pt, at) && _at->recv("OK")) {
+ if (set_psm_urcs(true)) {//enable the PSM URC
+ tr_info("PSM enabled successfully!");
+ _psm_status = ENABLED;
+ return_val = true;
} else {
- if (active_time <= 60*ie_value_max) { // multiples of 1 minute
- active_timer = (1<<5) | (active_time/60);
- strcpy(at, "00100000");
- } else { // multiples of decihours
- int t = active_time / (6*60);
- if (t > ie_value_max) {
- t = ie_value_max;
- }
- active_timer = t;
- strcpy(at, "01000000");
- }
- }
-
- uint_to_binary_str(active_timer, &at[3], sizeof(at)-3, 5);
- at[8] = '\0';
-
- if (_at->send("AT+CPSMS=1,,,\"%s\",\"%s\"", pt, at) && _at->recv("OK")) {
- if (set_psm_urcs(true)) {//enable the PSM URC
- tr_info("PSM enabled successfully!");
- _psm_status = ENABLED;
- return_val = true;
- } else {
- tr_error("PSM URCs not supported");
- return_val = false;
- }
- } else {
- tr_error("+CPSMS command failed");
+ tr_error("Error enabling PSM URCs, PSM not enabled");
+ _at->send("AT+CPSMS=0");
+ _at->recv("OK");
return_val = false;
}
+ } else {
+ tr_error("+CPSMS command failed");
+ return_val = false;
}
} else {
tr_error("PSM URCs not supported by this version of modem");
}
+
at_set_timeout(at_timeout);
UNLOCK();
return return_val;
diff -r d961d0c06cdf -r 64b96bdac04e UbloxCellularBase.h
--- a/UbloxCellularBase.h Thu Sep 05 15:46:11 2019 +0500
+++ b/UbloxCellularBase.h Mon Sep 23 14:29:32 2019 +0500
@@ -263,7 +263,7 @@
#if MBED_CONF_UBLOX_CELL_DEFAULT_MNO_PROFILE
#define DEFAULT_MNO_PROFILE (MNOProfile)MBED_CONF_UBLOX_CELL_DEFAULT_MNO_PROFILE
#else
- #define DEFAULT_MNO_PROFILE SW_DEFAULT
+ #define DEFAULT_MNO_PROFILE STANDARD_EU
#endif
/** Reads the current MNO profile from modem and sets it to user specified profile.
@@ -494,6 +494,12 @@
* @return True if successful, otherwise false.
*/
bool get_band_bitmask(uint64_t *m1_bitmask, uint64_t *nb1_bitmask);
+
+ /** disables the PSM
+ *
+ * @return True if successful, otherwise false.
+ */
+ bool disable_psm();
#endif
protected:
diff -r d961d0c06cdf -r 64b96bdac04e mbed_lib.json
--- a/mbed_lib.json Thu Sep 05 15:46:11 2019 +0500
+++ b/mbed_lib.json Mon Sep 23 14:29:32 2019 +0500
@@ -4,6 +4,6 @@
"baud-rate": 115200,
"at-parser-buffer-size": 256,
"at-parser-timeout": 8000,
- "default-mno-profile": 0
+ "default-mno-profile": 100
}
}