Diff: ble/services/UARTService.h

Revision:

1209:e3d4f8c7787b

Parent:

1208:65474dc93927

diff -r 65474dc93927 -r e3d4f8c7787b ble/services/UARTService.h
--- a/ble/services/UARTService.h	Wed Sep 14 14:18:00 2016 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,206 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __BLE_UART_SERVICE_H__
-#define __BLE_UART_SERVICE_H__
-
-#ifdef YOTTA_CFG_MBED_OS
-#include "mbed-drivers/mbed.h"
-#include "mbed-drivers/Stream.h"
-#else
-#include "mbed.h"
-#include "Stream.h"
-#endif
-
-#include "ble/UUID.h"
-#include "ble/BLE.h"
-
-extern const uint8_t  UARTServiceBaseUUID[UUID::LENGTH_OF_LONG_UUID];
-extern const uint16_t UARTServiceShortUUID;
-extern const uint16_t UARTServiceTXCharacteristicShortUUID;
-extern const uint16_t UARTServiceRXCharacteristicShortUUID;
-
-extern const uint8_t  UARTServiceUUID[UUID::LENGTH_OF_LONG_UUID];
-extern const uint8_t  UARTServiceUUID_reversed[UUID::LENGTH_OF_LONG_UUID];
-
-extern const uint8_t  UARTServiceTXCharacteristicUUID[UUID::LENGTH_OF_LONG_UUID];
-extern const uint8_t  UARTServiceRXCharacteristicUUID[UUID::LENGTH_OF_LONG_UUID];
-
-/**
-* @class UARTService.
-* @brief BLE Service to enable UART over BLE.
-*/
-class UARTService {
-public:
-    /**< Maximum length of data (in bytes) that the UART service module can transmit to the peer. */
-    static const unsigned BLE_UART_SERVICE_MAX_DATA_LEN = (BLE_GATT_MTU_SIZE_DEFAULT - 3);
-
-public:
-
-    /**
-    * @param[ref] ble
-    *               BLE object for the underlying controller.
-    */
-    UARTService(BLE &_ble) :
-        ble(_ble),
-        receiveBuffer(),
-        sendBuffer(),
-        sendBufferIndex(0),
-        numBytesReceived(0),
-        receiveBufferIndex(0),
-        txCharacteristic(UARTServiceTXCharacteristicUUID, receiveBuffer, 1, BLE_UART_SERVICE_MAX_DATA_LEN,
-                         GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE_WITHOUT_RESPONSE),
-        rxCharacteristic(UARTServiceRXCharacteristicUUID, sendBuffer, 1, BLE_UART_SERVICE_MAX_DATA_LEN, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY) {
-        GattCharacteristic *charTable[] = {&txCharacteristic, &rxCharacteristic};
-        GattService         uartService(UARTServiceUUID, charTable, sizeof(charTable) / sizeof(GattCharacteristic *));
-
-        ble.addService(uartService);
-        ble.onDataWritten(this, &UARTService::onDataWritten);
-    }
-
-    /**
-     * Note: TX and RX characteristics are to be interpreted from the viewpoint of the GATT client using this service.
-     */
-    uint16_t getTXCharacteristicHandle() {
-        return txCharacteristic.getValueAttribute().getHandle();
-    }
-
-    /**
-     * Note: TX and RX characteristics are to be interpreted from the viewpoint of the GATT client using this service.
-     */
-    uint16_t getRXCharacteristicHandle() {
-        return rxCharacteristic.getValueAttribute().getHandle();
-    }
-
-    /**
-     * We attempt to collect bytes before pushing them to the UART RX
-     * characteristic; writing to the RX characteristic then generates
-     * notifications for the client. Updates made in quick succession to a
-     * notification-generating characteristic result in data being buffered
-     * in the Bluetooth stack as notifications are sent out. The stack has
-     * its limits for this buffering - typically a small number under 10.
-     * Collecting data into the sendBuffer buffer helps mitigate the rate of
-     * updates. But we shouldn't buffer a large amount of data before updating
-     * the characteristic, otherwise the client needs to turn around and make
-     * a long read request; this is because notifications include only the first
-     * 20 bytes of the updated data.
-     *
-     * @param  buffer The received update.
-     * @param  length Number of characters to be appended.
-     * @return        Number of characters appended to the rxCharacteristic.
-     */
-    size_t write(const void *_buffer, size_t length) {
-        size_t         origLength = length;
-        const uint8_t *buffer     = static_cast<const uint8_t *>(_buffer);
-
-        if (ble.getGapState().connected) {
-            unsigned bufferIndex = 0;
-            while (length) {
-                unsigned bytesRemainingInSendBuffer = BLE_UART_SERVICE_MAX_DATA_LEN - sendBufferIndex;
-                unsigned bytesToCopy                = (length < bytesRemainingInSendBuffer) ? length : bytesRemainingInSendBuffer;
-
-                /* Copy bytes into sendBuffer. */
-                memcpy(&sendBuffer[sendBufferIndex], &buffer[bufferIndex], bytesToCopy);
-                length          -= bytesToCopy;
-                sendBufferIndex += bytesToCopy;
-                bufferIndex     += bytesToCopy;
-
-                /* Have we collected enough? */
-                if ((sendBufferIndex == BLE_UART_SERVICE_MAX_DATA_LEN) ||
-                    // (sendBuffer[sendBufferIndex - 1] == '\r')          ||
-                    (sendBuffer[sendBufferIndex - 1] == '\n')) {
-                    ble.gattServer().write(getRXCharacteristicHandle(), static_cast<const uint8_t *>(sendBuffer), sendBufferIndex);
-                    sendBufferIndex = 0;
-                }
-            }
-        }
-
-        return origLength;
-    }
-
-    /**
-     * Helper function to write out strings.
-     * @param  str The received string.
-     * @return     Number of characters appended to the rxCharacteristic.
-     */
-    size_t writeString(const char *str) {
-        return write(str, strlen(str));
-    }
-
-    /**
-     * Override for Stream::_putc().
-     * @param  c
-     *         This function writes the character c, cast to an unsigned char, to stream.
-     * @return
-     *     The character written as an unsigned char cast to an int or EOF on error.
-     */
-    int _putc(int c) {
-        return (write(&c, 1) == 1) ? 1 : EOF;
-    }
-
-    /**
-     * Override for Stream::_getc().
-     * @return
-     *     The character read.
-     */
-    int _getc() {
-        if (receiveBufferIndex == numBytesReceived) {
-            return EOF;
-        }
-
-        return receiveBuffer[receiveBufferIndex++];
-    }
-
-protected:
-    /**
-     * This callback allows the UART service to receive updates to the
-     * txCharacteristic. The application should forward the call to this
-     * function from the global onDataWritten() callback handler; if that's
-     * not used, this method can be used as a callback directly.
-     */
-    void onDataWritten(const GattWriteCallbackParams *params) {
-        if (params->handle == getTXCharacteristicHandle()) {
-            uint16_t bytesRead = params->len;
-            if (bytesRead <= BLE_UART_SERVICE_MAX_DATA_LEN) {
-                numBytesReceived   = bytesRead;
-                receiveBufferIndex = 0;
-                memcpy(receiveBuffer, params->data, numBytesReceived);
-            }
-        }
-    }
-
-protected:
-    BLE                &ble;
-
-    uint8_t             receiveBuffer[BLE_UART_SERVICE_MAX_DATA_LEN]; /**< The local buffer into which we receive
-                                                                       *   inbound data before forwarding it to the
-                                                                       *   application. */
-
-    uint8_t             sendBuffer[BLE_UART_SERVICE_MAX_DATA_LEN];    /**< The local buffer into which outbound data is
-                                                                       *   accumulated before being pushed to the
-                                                                       *   rxCharacteristic. */
-    uint8_t             sendBufferIndex;
-    uint8_t             numBytesReceived;
-    uint8_t             receiveBufferIndex;
-
-    GattCharacteristic  txCharacteristic; /**< From the point of view of the external client, this is the characteristic
-                                           *   they'd write into in order to communicate with this application. */
-    GattCharacteristic  rxCharacteristic; /**< From the point of view of the external client, this is the characteristic
-                                           *   they'd read from in order to receive the bytes transmitted by this
-                                           *   application. */
-};
-
-#endif /* #ifndef __BLE_UART_SERVICE_H__*/
\ No newline at end of file