High level Bluetooth Low Energy API and radio abstraction layer

Fork of BLE_API by Bluetooth Low Energy

Revision:
1131:692ddf04fc42
Parent:
1116:9cb51490b3f7
Child:
1134:d540a48f650d
--- a/ble/DiscoveredCharacteristic.h	Tue Jan 12 19:47:52 2016 +0000
+++ b/ble/DiscoveredCharacteristic.h	Wed Apr 06 19:13:46 2016 +0100
@@ -1,329 +1,186 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __DISCOVERED_CHARACTERISTIC_H__
-#define __DISCOVERED_CHARACTERISTIC_H__
-
-#include "UUID.h"
-#include "Gap.h"
-#include "GattAttribute.h"
-#include "GattClient.h"
-#include "CharacteristicDescriptorDiscovery.h"
-#include "ble/DiscoveredCharacteristicDescriptor.h"
-
-/**
- * @brief Representation of a characteristic discovered during a GattClient
- * discovery procedure (see GattClient::launchServiceDiscovery ).
- *
- * @detail Provide detailed informations about a discovered characteristic like:
- *     - Its UUID (see #getUUID).
- *     - The most important handles of the characteristic definition
- *       (see #getDeclHandle, #getValueHandle, #getLastHandle )
- *     - Its properties (see #getProperties).
- * This class also provide functions to operate on the characteristic:
- *     - Read the characteristic value (see #read)
- *     - Writing a characteristic value (see #write or #writeWoResponse)
- *     - Discover descriptors inside the characteristic definition. These descriptors
- *       extends the characteristic. More information about descriptor usage is
- *       available in DiscoveredCharacteristicDescriptor class.
- */
-class DiscoveredCharacteristic {
-public:
-    struct Properties_t {
-        uint8_t _broadcast       :1; /**< Broadcasting the value permitted. */
-        uint8_t _read            :1; /**< Reading the value permitted. */
-        uint8_t _writeWoResp     :1; /**< Writing the value with Write Command permitted. */
-        uint8_t _write           :1; /**< Writing the value with Write Request permitted. */
-        uint8_t _notify          :1; /**< Notifications of the value permitted. */
-        uint8_t _indicate        :1; /**< Indications of the value permitted. */
-        uint8_t _authSignedWrite :1; /**< Writing the value with Signed Write Command permitted. */
-
-    public:
-        bool broadcast(void)       const {return _broadcast;      }
-        bool read(void)            const {return _read;           }
-        bool writeWoResp(void)     const {return _writeWoResp;    }
-        bool write(void)           const {return _write;          }
-        bool notify(void)          const {return _notify;         }
-        bool indicate(void)        const {return _indicate;       }
-        bool authSignedWrite(void) const {return _authSignedWrite;}
-
-        /**
-         * @brief "Equal to" operator for DiscoveredCharacteristic::Properties_t
-         *
-         * @param lhs[in] The left hand side of the equality expression
-         * @param rhs[in] The right hand side of the equality expression
-         *
-         * @return true if operands are equals, false otherwise.
-         */
-        friend bool operator==(Properties_t lhs, Properties_t rhs) {
-            return lhs._broadcast == rhs._broadcast &&
-                   lhs._read == rhs._read &&
-                   lhs._writeWoResp == rhs._writeWoResp &&
-                   lhs._write == rhs._write &&
-                   lhs._notify == rhs._notify &&
-                   lhs._indicate == rhs._indicate &&
-                   lhs._authSignedWrite == rhs._authSignedWrite;
-        }
-
-        /**
-         * @brief "Not equal to" operator for DiscoveredCharacteristic::Properties_t
-         *
-         * @param lhs The right hand side of the expression
-         * @param rhs The left hand side of the expression
-         *
-         * @return true if operands are not equals, false otherwise.
-         */
-        friend bool operator!=(Properties_t lhs, Properties_t rhs) {
-            return !(lhs == rhs);
-        }
-
-    private:
-        operator uint8_t()  const; /* Disallow implicit conversion into an integer. */
-        operator unsigned() const; /* Disallow implicit conversion into an integer. */
-    };
-
-    /**
-     * Initiate (or continue) a read for the value attribute, optionally at a
-     * given offset. If the characteristic or descriptor to be read is longer
-     * than ATT_MTU - 1, this function must be called multiple times with
-     * appropriate offset to read the complete value.
-     *
-     * @param offset[in] The position - in the characteristic value bytes stream - where
-     * the read operation begin.
-     *
-     * @return BLE_ERROR_NONE if a read has been initiated, or
-     *         BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or
-     *         BLE_STACK_BUSY if some client procedure is already in progress, or
-     *         BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties.
-     */
-    ble_error_t read(uint16_t offset = 0) const;
-
-    /**
-     * @brief Same as #read(uint16_t) const but allow the user to register a callback
-     * which will be fired once the read is done.
-     *
-     * @param offset[in] The position - in the characteristic value bytes stream - where
-     * the read operation begin.
-     * @param onRead[in] Continuation of the read operation
-     */
-    ble_error_t read(uint16_t offset, const GattClient::ReadCallback_t& onRead) const;
-
-    /**
-     * Perform a write without response procedure.
-     *
-     * @param[in]  length
-     *           The amount of data being written.
-     * @param[in]  value
-     *           The bytes being written.
-     *
-     * @note   It is important to note that a write without response will generate
-     *         an onDataSent() callback when the packet has been transmitted. There
-     *         will be a BLE-stack specific limit to the number of pending
-     *         writeWoResponse operations; the user may want to use the onDataSent()
-     *         callback for flow-control.
-     *
-     * @retval BLE_ERROR_NONE Successfully started the Write procedure, or
-     *         BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or
-     *         BLE_STACK_BUSY if some client procedure is already in progress, or
-     *         BLE_ERROR_NO_MEM if there are no available buffers left to process the request, or
-     *         BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties.
-     */
-    ble_error_t writeWoResponse(uint16_t length, const uint8_t *value) const;
-
-    /**
-     * Initiate a GATT Characteristic Descriptor Discovery procedure for descriptors within this characteristic.
-     *
-     * @param[in] onDescriptorDiscovered This callback will be called every time a descriptor is discovered
-     * @param[in] onTermination This callback will be called when the discovery process is over.
-     *
-     * @return BLE_ERROR_NONE if descriptor discovery is launched successfully; else an appropriate error.
-     */
-    ble_error_t discoverDescriptors(const CharacteristicDescriptorDiscovery::DiscoveryCallback_t& onDescriptorDiscovered,
-                                    const CharacteristicDescriptorDiscovery::TerminationCallback_t& onTermination) const;
-
-    /**
-     * Perform a write procedure.
-     *
-     * @param[in]  length
-     *           The amount of data being written.
-     * @param[in]  value
-     *           The bytes being written.
-     *
-     * @note   It is important to note that a write will generate
-     *         an onDataWritten() callback when the peer acknowledges the request.
-     *
-     * @retval BLE_ERROR_NONE Successfully started the Write procedure, or
-     *         BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or
-     *         BLE_STACK_BUSY if some client procedure is already in progress, or
-     *         BLE_ERROR_NO_MEM if there are no available buffers left to process the request, or
-     *         BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties.
-     */
-    ble_error_t write(uint16_t length, const uint8_t *value) const;
-
-    /**
-     * Same as #write(uint16_t, const uint8_t *) const but register a callback
-     * which will be called once the data has been written.
-     *
-     * @param[in] length The amount of bytes to write.
-     * @param[in] value The bytes to write.
-     * @param[in] onRead Continuation callback for the write operation
-     */
-    ble_error_t write(uint16_t length, const uint8_t *value, const GattClient::WriteCallback_t& onWrite) const;
-
-    void setupLongUUID(UUID::LongUUIDBytes_t longUUID, UUID::ByteOrder_t order = UUID::MSB) {
-        uuid.setupLong(longUUID, order);
-    }
-
-public:
-    /**
-     * @brief Get the UUID of the discovered characteristic
-     * @return the UUID of this characteristic
-     */
-    const UUID& getUUID(void) const {
-        return uuid;
-    }
-
-    /**
-     * @brief Get the properties of this characteristic
-     * @return the set of properties of this characteristic
-     */
-    const Properties_t& getProperties(void) const {
-        return props;
-    }
-
-    /**
-     * @brief Get the declaration handle of this characteristic.
-     * @detail The declaration handle is the first handle of a characteristic
-     * definition. The value accessible at this handle contains the following
-     * informations:
-     *    - The characteristics properties (see Properties_t). This value can
-     *      be accessed by using #getProperties .
-     *    - The characteristic value attribute handle. This field can be accessed
-     *      by using #getValueHandle .
-     *    - The characteristic UUID, this value can be accessed by using the
-     *      function #getUUID .
-     * @return the declaration handle of this characteristic.
-     */
-    GattAttribute::Handle_t getDeclHandle(void) const {
-        return declHandle;
-    }
-
-    /**
-     * @brief Return the handle used to access the value of this characteristic.
-     * @details This handle is the one provided in the characteristic declaration
-     * value. Usually, it is equal to #getDeclHandle() + 1. But it is not always
-     * the case. Anyway, users are allowed to use #getDeclHandle() + 1 to access
-     * the value of a characteristic.
-     * @return The handle to access the value of this characteristic.
-     */
-    GattAttribute::Handle_t getValueHandle(void) const {
-        return valueHandle;
-    }
-
-    /**
-     * @brief Return the last handle of the characteristic definition.
-     * @details A Characteristic definition can contain a lot of handles:
-     *     - one for the declaration (see #getDeclHandle)
-     *     - one for the value (see #getValueHandle)
-     *     - zero of more for the characteristic descriptors.
-     * This handle is the last handle of the characteristic definition.
-     * @return The last handle of this characteristic definition.
-     */
-    GattAttribute::Handle_t getLastHandle(void) const {
-        return lastHandle;
-    }
-
-    /**
-     * @brief Return the GattClient which can operate on this characteristic.
-     * @return The GattClient which can operate on this characteristic.
-     */
-    GattClient* getGattClient() {
-        return gattc;
-    }
-
-    /**
-     * @brief Return the GattClient which can operate on this characteristic.
-     * @return The GattClient which can operate on this characteristic.
-     */
-    const GattClient* getGattClient() const {
-        return gattc;
-    }
-
-    /**
-     * @brief Return the connection handle to the GattServer which contain
-     * this characteristic.
-     * @return the connection handle to the GattServer which contain
-     * this characteristic.
-     */
-    Gap::Handle_t getConnectionHandle() const {
-        return connHandle;
-    }
-
-    /**
-     * @brief "Equal to" operator for DiscoveredCharacteristic
-     *
-     * @param lhs[in] The left hand side of the equality expression
-     * @param rhs[in] The right hand side of the equality expression
-     *
-     * @return true if operands are equals, false otherwise.
-     */
-    friend bool operator==(const DiscoveredCharacteristic& lhs, const DiscoveredCharacteristic& rhs) {
-        return lhs.gattc == rhs.gattc &&
-               lhs.uuid == rhs.uuid &&
-               lhs.props == rhs.props &&
-               lhs.declHandle == rhs.declHandle &&
-               lhs.valueHandle == rhs.valueHandle &&
-               lhs.lastHandle == rhs.lastHandle &&
-               lhs.connHandle == rhs.connHandle;
-    }
-
-    /**
-     * @brief "Not equal to" operator for DiscoveredCharacteristic
-     *
-     * @param lhs[in] The right hand side of the expression
-     * @param rhs[in] The left hand side of the expression
-     *
-     * @return true if operands are not equals, false otherwise.
-     */
-    friend bool operator !=(const DiscoveredCharacteristic& lhs, const DiscoveredCharacteristic& rhs) {
-        return !(lhs == rhs);
-    }
-
-public:
-    DiscoveredCharacteristic() : gattc(NULL),
-                                 uuid(UUID::ShortUUIDBytes_t(0)),
-                                 props(),
-                                 declHandle(GattAttribute::INVALID_HANDLE),
-                                 valueHandle(GattAttribute::INVALID_HANDLE),
-                                 lastHandle(GattAttribute::INVALID_HANDLE),
-                                 connHandle() {
-        /* empty */
-    }
-
-protected:
-    GattClient              *gattc;
-
-protected:
-    UUID                     uuid;
-    Properties_t             props;
-    GattAttribute::Handle_t  declHandle;
-    GattAttribute::Handle_t  valueHandle;
-    GattAttribute::Handle_t  lastHandle;
-
-    Gap::Handle_t            connHandle;
-};
-
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __DISCOVERED_CHARACTERISTIC_H__
+#define __DISCOVERED_CHARACTERISTIC_H__
+
+#include "UUID.h"
+#include "Gap.h"
+#include "GattAttribute.h"
+#include "GattClient.h"
+
+/**
+ * Structure for holding information about the service and the characteristics
+ * found during the discovery process.
+ */
+class DiscoveredCharacteristic {
+public:
+    struct Properties_t {
+        uint8_t _broadcast       :1; /**< Broadcasting the value permitted. */
+        uint8_t _read            :1; /**< Reading the value permitted. */
+        uint8_t _writeWoResp     :1; /**< Writing the value with Write Command permitted. */
+        uint8_t _write           :1; /**< Writing the value with Write Request permitted. */
+        uint8_t _notify          :1; /**< Notications of the value permitted. */
+        uint8_t _indicate        :1; /**< Indications of the value permitted. */
+        uint8_t _authSignedWrite :1; /**< Writing the value with Signed Write Command permitted. */
+
+    public:
+        bool broadcast(void)       const {return _broadcast;      }
+        bool read(void)            const {return _read;           }
+        bool writeWoResp(void)     const {return _writeWoResp;    }
+        bool write(void)           const {return _write;          }
+        bool notify(void)          const {return _notify;         }
+        bool indicate(void)        const {return _indicate;       }
+        bool authSignedWrite(void) const {return _authSignedWrite;}
+
+    private:
+        operator uint8_t()  const; /* Disallow implicit conversion into an integer. */
+        operator unsigned() const; /* Disallow implicit conversion into an integer. */
+    };
+
+    /**
+     * Structure for holding information about the service and the characteristics
+     * found during the discovery process.
+     */
+    struct DiscoveredDescriptor {
+        GattAttribute::Handle_t handle; /**< Descriptor Handle. */
+        UUID                    uuid;   /**< Descriptor UUID. */
+    };
+
+    /**
+     * Callback type for when a characteristic descriptor is found during descriptor-
+     * discovery. The receiving function is passed in a pointer to a
+     * DiscoveredDescriptor object which will remain valid for the lifetime
+     * of the callback. Memory for this object is owned by the BLE_API eventing
+     * framework. The application can safely make a persistent shallow-copy of
+     * this object in order to work with the characteristic beyond the callback.
+     */
+    typedef void (*DescriptorCallback_t)(const DiscoveredDescriptor *);
+
+    /**
+     * Initiate (or continue) a read for the value attribute, optionally at a
+     * given offset. If the characteristic or descriptor to be read is longer
+     * than ATT_MTU - 1, this function must be called multiple times with
+     * appropriate offset to read the complete value.
+     *
+     * @return BLE_ERROR_NONE if a read has been initiated, or
+     *         BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or
+     *         BLE_STACK_BUSY if some client procedure is already in progress, or
+     *         BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties.
+     */
+    ble_error_t read(uint16_t offset = 0) const;
+
+    ble_error_t read(uint16_t offset, const GattClient::ReadCallback_t& onRead) const;
+
+    /**
+     * Perform a write without response procedure.
+     *
+     * @param  length
+     *           The amount of data being written.
+     * @param  value
+     *           The bytes being written.
+     *
+     * @note   It is important to note that a write without response will generate
+     *         an onDataSent() callback when the packet has been transmitted. There
+     *         will be a BLE-stack specific limit to the number of pending
+     *         writeWoResponse operations; the user may want to use the onDataSent()
+     *         callback for flow-control.
+     *
+     * @retval BLE_ERROR_NONE Successfully started the Write procedure, or
+     *         BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or
+     *         BLE_STACK_BUSY if some client procedure is already in progress, or
+     *         BLE_ERROR_NO_MEM if there are no available buffers left to process the request, or
+     *         BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties.
+     */
+    ble_error_t writeWoResponse(uint16_t length, const uint8_t *value) const;
+
+    /**
+     * Initiate a GATT Characteristic Descriptor Discovery procedure for descriptors within this characteristic.
+     *
+     * @param  callback
+     * @param  matchingUUID
+     *           Filter for descriptors. Defaults to wildcard which will discover all descriptors.
+     *
+     * @return  BLE_ERROR_NONE if descriptor discovery is launched successfully; else an appropriate error.
+     */
+    ble_error_t discoverDescriptors(DescriptorCallback_t callback, const UUID &matchingUUID = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN)) const;
+
+    /**
+     * Perform a write procedure.
+     *
+     * @param  length
+     *           The amount of data being written.
+     * @param  value
+     *           The bytes being written.
+     *
+     * @note   It is important to note that a write will generate
+     *         an onDataWritten() callback when the peer acknowledges the request.
+     *
+     * @retval BLE_ERROR_NONE Successfully started the Write procedure, or
+     *         BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or
+     *         BLE_STACK_BUSY if some client procedure is already in progress, or
+     *         BLE_ERROR_NO_MEM if there are no available buffers left to process the request, or
+     *         BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties.
+     */
+    ble_error_t write(uint16_t length, const uint8_t *value) const;
+
+    /** 
+     * Same as above but register the callback wich will be called once the data has been written
+     */
+    ble_error_t write(uint16_t length, const uint8_t *value, const GattClient::WriteCallback_t& onRead) const;
+
+    void setupLongUUID(UUID::LongUUIDBytes_t longUUID) {
+        uuid.setupLong(longUUID);
+    }
+
+public:
+    const UUID& getUUID(void) const {
+        return uuid;
+    }
+
+    const Properties_t& getProperties(void) const {
+        return props;
+    }
+
+    const GattAttribute::Handle_t& getDeclHandle(void) const {
+        return declHandle;
+    }
+    const GattAttribute::Handle_t& getValueHandle(void) const {
+        return valueHandle;
+    }
+
+public:
+    DiscoveredCharacteristic() : gattc(NULL),
+                                 uuid(UUID::ShortUUIDBytes_t(0)),
+                                 props(),
+                                 declHandle(GattAttribute::INVALID_HANDLE),
+                                 valueHandle(GattAttribute::INVALID_HANDLE) {
+        /* empty */
+    }
+
+protected:
+    GattClient              *gattc;
+
+protected:
+    UUID                     uuid;
+    Properties_t             props;
+    GattAttribute::Handle_t  declHandle;
+    GattAttribute::Handle_t  valueHandle;
+
+    Gap::Handle_t            connHandle;
+};
+
 #endif /*__DISCOVERED_CHARACTERISTIC_H__*/
\ No newline at end of file