High level Bluetooth Low Energy API and radio abstraction layer

Fork of BLE_API by Bluetooth Low Energy

Revision:
1131:692ddf04fc42
Parent:
1119:7a487d506451
Child:
1135:22aada733dbd
--- a/ble/BLE.h	Tue Jan 12 19:47:52 2016 +0000
+++ b/ble/BLE.h	Wed Apr 06 19:13:46 2016 +0100
@@ -1,1444 +1,1444 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __BLE_H__
-#define __BLE_H__
-
-#include "blecommon.h"
-#include "Gap.h"
-#include "GattServer.h"
-#include "GattClient.h"
-
-#include "ble/FunctionPointerWithContext.h"
-
-#ifdef YOTTA_CFG_MBED_OS
-#include "mbed-drivers/mbed_error.h"
-#else
-#include "mbed_error.h"
-#endif
-
-/* Forward declaration for the implementation class */
-class BLEInstanceBase;
-
-/**
- * The base class used to abstract away BLE-capable radio transceivers or SOCs,
- * so that the BLE API can work with any radio transparently.
- */
-class BLE
-{
-public:
-    typedef unsigned InstanceID_t; /** The type returned by BLE::getInstanceID(). */
-
-    /**
-     * The context provided to init-completion-callbacks (see init() below).
-     *
-     * @param  ble
-     *             A reference to the BLE instance being initialized.
-     * @param  error
-     *             Captures the result of initialization. It is set to
-     *             BLE_ERROR_NONE if initialization completed successfully. Else
-     *             the error value is implementation specific.
-     */
-    struct InitializationCompleteCallbackContext {
-        BLE&        ble;   /* Reference to the BLE object that has been initialized */
-        ble_error_t error; /* Error status of the initialization. It is set to BLE_ERROR_NONE if initialization completed successfully. */
-    };
-
-    /**
-     * The signature for function-pointer like callbacks for initialization-completion.
-     *
-     * @note There are two versions of init(). In addition to the simple
-     *     function-pointer, init() can also take a <Object, member> tuple as its
-     *     callback target. In case of the latter, the following declaration doesn't apply.
-     */
-    typedef void (*InitializationCompleteCallback_t)(InitializationCompleteCallbackContext *context);
-
-    /**
-     * Initialize the BLE controller. This should be called before using
-     * anything else in the BLE_API.
-     *
-     * init() hands control to the underlying BLE module to accomplish
-     * initialization. This initialization may tacitly depend on other hardware
-     * setup (such as clocks or power-modes) that happens early on during
-     * system startup. It may not be safe to call init() from a global static
-     * context where ordering is compiler-specific and can't be guaranteed - it
-     * is safe to call BLE::init() from within main().
-     *
-     * @param  initCompleteCallback
-     *           A callback for when initialization completes for a BLE
-     *           instance. This is an optional parameter; if no callback is
-     *           set up the application can still determine the status of
-     *           initialization using BLE::hasInitialized() (see below).
-     *
-     * @return  BLE_ERROR_NONE if the initialization procedure was started
-     *     successfully.
-     *
-     * @note If init() returns BLE_ERROR_NONE, the underlying stack must invoke
-     *     the initialization completion callback at some point.
-     *
-     * @note In some cases, initialization is instantaneous (or blocking); if
-     *     so, it is acceptable for the stack-specific implementation of init()
-     *     to invoke the completion callback directly (within its own
-     *     context).
-     *
-     * @note Nearly all BLE APIs would return
-     *     BLE_ERROR_INITIALIZATION_INCOMPLETE if used on an instance before the
-     *     corresponding transport is initialized.
-     *
-     * @note There are two versions of init(). In addition to the simple
-     *     function-pointer, init() can also take an <Object, member> tuple as its
-     *     callback target.
-     */
-    ble_error_t init(InitializationCompleteCallback_t initCompleteCallback = NULL) {
-        FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(initCompleteCallback);
-        return initImplementation(callback);
-    }
-
-    /**
-     * An alternate declaration for init(). This one takes an <Object, member> tuple as its
-     * callback target.
-     */
-    template<typename T>
-    ble_error_t init(T *object, void (T::*initCompleteCallback)(InitializationCompleteCallbackContext *context)) {
-        FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(object, initCompleteCallback);
-        return initImplementation(callback);
-    }
-
-    /**
-     * @return true if initialization has completed for the underlying BLE
-     *     transport.
-     *
-     * The application can set up a callback to signal completion of
-     * initialization when using init(). Otherwise, this method can be used to
-     * poll the state of initialization.
-     */
-    bool hasInitialized(void) const;
-
-    /**
-     * Purge the BLE stack of GATT and GAP state. init() must be called
-     * afterwards to re-instate services and GAP state. This API offers a way to
-     * repopulate the GATT database with new services and characteristics.
-     */
-    ble_error_t shutdown(void);
-
-    /**
-     * This call allows the application to get the BLE stack version information.
-     *
-     * @return  A pointer to a const string representing the version.
-     *          Note: The string is owned by BLE_API.
-     */
-    const char *getVersion(void);
-
-    /*
-     * Accessors to GAP. Please refer to Gap.h. All GAP related functionality requires
-     * going through this accessor.
-     */
-    const Gap &gap() const;
-    Gap &gap();
-
-    /*
-     * Accessors to GATT Server. Please refer to GattServer.h. All GATTServer related
-     * functionality requires going through this accessor.
-     */
-    const GattServer& gattServer() const;
-    GattServer& gattServer();
-
-    /*
-     * Accessors to GATT Client. Please refer to GattClient.h. All GATTClient related
-     * functionality requires going through this accessor.
-     */
-    const GattClient& gattClient() const;
-    GattClient& gattClient();
-
-    /*
-     * Accessors to Security Manager. Please refer to SecurityManager.h. All
-     * SecurityManager related functionality requires going through this
-     * accessor.
-     */
-    const SecurityManager& securityManager() const;
-    SecurityManager& securityManager();
-
-    /**
-     * Yield control to the BLE stack or to other tasks waiting for events. This
-     * is a sleep function that will return when there is an application-specific
-     * interrupt, but the MCU might wake up several times before
-     * returning (to service the stack). This is not always interchangeable with
-     * WFE().
-     */
-    void waitForEvent(void);
-
-public:
-    static const InstanceID_t DEFAULT_INSTANCE = 0;
-#ifndef YOTTA_CFG_BLE_INSTANCES_COUNT
-    static const InstanceID_t NUM_INSTANCES = 1;
-#else
-    static const InstanceID_t NUM_INSTANCES = YOTTA_CFG_BLE_INSTANCES_COUNT;
-#endif
-
-    /**
-     * Get a reference to the BLE singleton corresponding to a given interface.
-     * There is a static array of BLE singletons.
-     *
-     * @Note: Calling Instance() is preferred over constructing a BLE object
-     * directly, as it returns references to singletons.
-     *
-     * @param[in] id
-     *              Instance-ID. This should be less than NUM_INSTANCES
-     *              for the returned BLE singleton to be useful.
-     *
-     * @return a reference to a single object.
-     */
-    static BLE &Instance(InstanceID_t id = DEFAULT_INSTANCE);
-
-    /**
-     * Constructor for a handle to a BLE instance (the BLE stack). BLE handles
-     * are thin wrappers around a transport object (that is, ptr. to
-     * BLEInstanceBase).
-     *
-     * It is better to create BLE objects as singletons accessed through the
-     * Instance() method. If multiple BLE handles are constructed for the same
-     * interface (using this constructor), they will share the same underlying
-     * transport object.
-     */
-    BLE(InstanceID_t instanceID = DEFAULT_INSTANCE);
-
-    /**
-     * Fetch the ID of a BLE instance. Typically there would only be the DEFAULT_INSTANCE.
-     */
-    InstanceID_t getInstanceID(void) const {
-        return instanceID;
-    }
-
-    /*
-     * Deprecation alert!
-     * All of the following are deprecated and may be dropped in a future
-     * release. Documentation should refer to alternative APIs.
-     */
-
-    /* GAP specific APIs. */
-public:
-    /**
-     * Set the BTLE MAC address and type.
-     * @return BLE_ERROR_NONE on success.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.setAddress(...) should be replaced with
-     * ble.gap().setAddress(...).
-     */
-    ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::AddressBytes_t address) {
-        return gap().setAddress(type, address);
-    }
-
-    /**
-     * Fetch the BTLE MAC address and type.
-     * @return BLE_ERROR_NONE on success.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.getAddress(...) should be replaced with
-     * ble.gap().getAddress(...).
-     */
-    ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::AddressBytes_t address) {
-        return gap().getAddress(typeP, address);
-    }
-
-    /**
-     * Set the GAP advertising mode to use for this device.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.setAdvertisingType(...) should be replaced with
-     * ble.gap().setAdvertisingType(...).
-     */
-    void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
-        gap().setAdvertisingType(advType);
-    }
-
-    /**
-     * @param[in] interval
-     *              Advertising interval in units of milliseconds. Advertising
-     *              is disabled if interval is 0. If interval is smaller than
-     *              the minimum supported value, then the minimum supported
-     *              value is used instead. This minimum value can be discovered
-     *              using getMinAdvertisingInterval().
-     *
-     *              This field must be set to 0 if connectionMode is equal
-     *              to ADV_CONNECTABLE_DIRECTED.
-     *
-     * @note: Decreasing this value allows central devices to detect a
-     * peripheral faster, at the expense of more power being used by the radio
-     * due to the higher data transmit rate.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.setAdvertisingInterval(...) should be replaced with
-     * ble.gap().setAdvertisingInterval(...).
-     *
-     * @note: [WARNING] This API previously used 0.625ms as the unit for its
-     * 'interval' argument. That required an explicit conversion from
-     * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
-     * no longer required as the new units are milliseconds. Any application
-     * code depending on the old semantics needs to be updated accordingly.
-     */
-    void setAdvertisingInterval(uint16_t interval) {
-        gap().setAdvertisingInterval(interval);
-    }
-
-    /**
-     * @return Minimum Advertising interval in milliseconds.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.getMinAdvertisingInterval(...) should be replaced with
-     * ble.gap().getMinAdvertisingInterval(...).
-     */
-    uint16_t getMinAdvertisingInterval(void) const {
-        return gap().getMinAdvertisingInterval();
-    }
-
-    /**
-     * @return Minimum Advertising interval in milliseconds for non-connectible mode.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
-     * ble.gap().getMinNonConnectableAdvertisingInterval(...).
-     */
-    uint16_t getMinNonConnectableAdvertisingInterval(void) const {
-        return gap().getMinNonConnectableAdvertisingInterval();
-    }
-
-    /**
-     * @return Maximum Advertising interval in milliseconds.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.getMaxAdvertisingInterval(...) should be replaced with
-     * ble.gap().getMaxAdvertisingInterval(...).
-     */
-    uint16_t getMaxAdvertisingInterval(void) const {
-        return gap().getMaxAdvertisingInterval();
-    }
-
-    /**
-     * @param[in] timeout
-     *              Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
-     *              and 16383). Use 0 to disable the advertising timeout.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.setAdvertisingTimeout(...) should be replaced with
-     * ble.gap().setAdvertisingTimeout(...).
-     */
-    void setAdvertisingTimeout(uint16_t timeout) {
-        gap().setAdvertisingTimeout(timeout);
-    }
-
-    /**
-     * Set up a particular, user-constructed set of advertisement parameters for
-     * the underlying stack. It would be uncommon for this API to be used
-     * directly; there are other APIs to tweak advertisement parameters
-     * individually (see above).
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.setAdvertisingParams(...) should be replaced with
-     * ble.gap().setAdvertisingParams(...).
-     */
-    void setAdvertisingParams(const GapAdvertisingParams &advParams) {
-        gap().setAdvertisingParams(advParams);
-    }
-
-    /**
-     * @return  Read back advertising parameters. Useful for storing and
-     *          restoring parameters rapidly.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.getAdvertisingParams(...) should be replaced with
-     * ble.gap().getAdvertisingParams(...).
-     */
-    const GapAdvertisingParams &getAdvertisingParams(void) const {
-        return gap().getAdvertisingParams();
-    }
-
-    /**
-     * Accumulate an AD structure in the advertising payload. Please note that
-     * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
-     * as an additional 31 bytes if the advertising payload is too
-     * small.
-     *
-     * @param[in] flags
-     *              The flags to add. Please refer to
-     *              GapAdvertisingData::Flags for valid flags. Multiple
-     *              flags may be specified in combination.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.accumulateAdvertisingPayload(flags) should be replaced with
-     * ble.gap().accumulateAdvertisingPayload(flags).
-     */
-    ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
-        return gap().accumulateAdvertisingPayload(flags);
-    }
-
-    /**
-     * Accumulate an AD structure in the advertising payload. Please note that
-     * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
-     * as an additional 31 bytes if the advertising payload is too
-     * small.
-     *
-     * @param[in] app
-     *              The appearance of the peripheral.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.accumulateAdvertisingPayload(appearance) should be replaced with
-     * ble.gap().accumulateAdvertisingPayload(appearance).
-     */
-    ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
-        return gap().accumulateAdvertisingPayload(app);
-    }
-
-    /**
-     * Accumulate an AD structure in the advertising payload. Please note that
-     * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
-     * as an additional 31 bytes if the advertising payload is too
-     * small.
-     *
-     * @param[in] app
-     *              The max transmit power to be used by the controller. This
-     *              is only a hint.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
-     * ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
-     */
-    ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
-        return gap().accumulateAdvertisingPayloadTxPower(power);
-    }
-
-    /**
-     * Accumulate a variable length byte-stream as an AD structure in the
-     * advertising payload. Please note that the payload is limited to 31 bytes.
-     * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
-     * advertising payload is too small.
-     *
-     * @param  type The type that describes the variable length data.
-     * @param  data Data bytes.
-     * @param  len  Data length.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.accumulateAdvertisingPayload(...) should be replaced with
-     * ble.gap().accumulateAdvertisingPayload(...).
-     */
-    ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
-        return gap().accumulateAdvertisingPayload(type, data, len);
-    }
-
-    /**
-     * Setup a particular, user-constructed advertisement payload for the
-     * underlying stack. It would be uncommon for this API to be used directly;
-     * there are other APIs to build an advertisement payload (see above).
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.setAdvertisingData(...) should be replaced with
-     * ble.gap().setAdvertisingPayload(...).
-     */
-    ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
-        return gap().setAdvertisingPayload(advData);
-    }
-
-    /**
-     * @return  Read back advertising data. Useful for storing and
-     *          restoring payload.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.getAdvertisingData(...) should be replaced with
-     * ble.gap().getAdvertisingPayload()(...).
-     */
-    const GapAdvertisingData &getAdvertisingData(void) const {
-        return gap().getAdvertisingPayload();
-    }
-
-    /**
-     * Reset any advertising payload prepared from prior calls to
-     * accumulateAdvertisingPayload(). This automatically propagates the re-
-     * initialized advertising payload to the underlying stack.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.clearAdvertisingPayload(...) should be replaced with
-     * ble.gap().clearAdvertisingPayload(...).
-     */
-    void clearAdvertisingPayload(void) {
-        gap().clearAdvertisingPayload();
-    }
-
-    /**
-     * This API is *deprecated* and resolves to a no-operation. It is left here
-     * to allow older code to compile. Please avoid using this API in new code.
-     * This API will be dropped in a future release.
-     *
-     * Formerly, it would be used to dynamically reset the accumulated advertising
-     * payload and scanResponse; to do this, the application would clear and re-
-     * accumulate a new advertising payload (and scanResponse) before using this
-     * API. Updates to the underlying advertisement payload now happen
-     * implicitly.
-     */
-    ble_error_t setAdvertisingPayload(void) {
-        return BLE_ERROR_NONE;
-    }
-
-    /**
-     * Accumulate a variable length byte-stream as an AD structure in the
-     * scanResponse payload.
-     *
-     * @param[in] type The type that describes the variable length data.
-     * @param[in] data Data bytes.
-     * @param[in] len  Data length.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.accumulateScanResponse(...) should be replaced with
-     * ble.gap().accumulateScanResponse(...).
-     */
-    ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
-        return gap().accumulateScanResponse(type, data, len);
-    }
-
-    /**
-     * Reset any scan response prepared from prior calls to
-     * accumulateScanResponse().
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.clearScanResponse(...) should be replaced with
-     * ble.gap().clearScanResponse(...).
-     */
-    void clearScanResponse(void) {
-        gap().clearScanResponse();
-    }
-
-    /**
-     * Start advertising.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.startAdvertising(...) should be replaced with
-     * ble.gap().startAdvertising(...).
-     */
-    ble_error_t startAdvertising(void) {
-        return gap().startAdvertising();
-    }
-
-    /**
-     * Stop advertising.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.stopAdvertising(...) should be replaced with
-     * ble.gap().stopAdvertising(...).
-     */
-    ble_error_t stopAdvertising(void) {
-        return gap().stopAdvertising();
-    }
-
-    /**
-     * Set up parameters for GAP scanning (observer mode).
-     * @param[in] interval
-     *              Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
-     * @param[in] window
-     *              Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
-     * @param[in] timeout
-     *              Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
-     * @param[in] activeScanning
-     *              Set to True if active-scanning is required. This is used to fetch the
-     *              scan response from a peer if possible.
-     *
-     * The scanning window divided by the interval determines the duty cycle for
-     * scanning. For example, if the interval is 100ms and the window is 10ms,
-     * then the controller will scan for 10 percent of the time. It is possible
-     * to have the interval and window set to the same value. In this case,
-     * scanning is continuous, with a change of scanning frequency once every
-     * interval.
-     *
-     * Once the scanning parameters have been configured, scanning can be
-     * enabled by using startScan().
-     *
-     * @Note: The scan interval and window are recommendations to the BLE stack.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.setScanParams(...) should be replaced with
-     * ble.gap().setScanParams(...).
-     */
-    ble_error_t setScanParams(uint16_t interval       = GapScanningParams::SCAN_INTERVAL_MAX,
-                              uint16_t window         = GapScanningParams::SCAN_WINDOW_MAX,
-                              uint16_t timeout        = 0,
-                              bool     activeScanning = false) {
-        return gap().setScanParams(interval, window, timeout, activeScanning);
-    }
-
-    /**
-     * Set up the scanInterval parameter for GAP scanning (observer mode).
-     * @param[in] interval
-     *              Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
-     *
-     * The scanning window divided by the interval determines the duty cycle for
-     * scanning. For example, if the interval is 100ms and the window is 10ms,
-     * then the controller will scan for 10 percent of the time. It is possible
-     * to have the interval and window set to the same value. In this case,
-     * scanning is continuous, with a change of scanning frequency once every
-     * interval.
-     *
-     * Once the scanning parameters have been configured, scanning can be
-     * enabled by using startScan().
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.setScanInterval(interval) should be replaced with
-     * ble.gap().setScanInterval(interval).
-     */
-    ble_error_t setScanInterval(uint16_t interval) {
-        return gap().setScanInterval(interval);
-    }
-
-    /**
-     * Set up the scanWindow parameter for GAP scanning (observer mode).
-     * @param[in] window
-     *              Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
-     *
-     * The scanning window divided by the interval determines the duty cycle for
-     * scanning. For example, if the interval is 100ms and the window is 10ms,
-     * then the controller will scan for 10 percent of the time. It is possible
-     * to have the interval and window set to the same value. In this case,
-     * scanning is continuous, with a change of scanning frequency once every
-     * interval.
-     *
-     * Once the scanning parameters have been configured, scanning can be
-     * enabled by using startScan().
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.setScanWindow(window) should be replaced with
-     * ble.gap().setScanWindow(window).
-     */
-    ble_error_t setScanWindow(uint16_t window) {
-        return gap().setScanWindow(window);
-    }
-
-    /**
-     * Set up parameters for GAP scanning (observer mode).
-     * @param[in] timeout
-     *              Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
-     *
-     * The scanning window divided by the interval determines the duty cycle for
-     * scanning. For example, if the interval is 100ms and the window is 10ms,
-     * then the controller will scan for 10 percent of the time. It is possible
-     * to have the interval and window set to the same value. In this case,
-     * scanning is continuous, with a change of scanning frequency once every
-     * interval.
-     *
-     * Once the scanning parameters have been configured, scanning can be
-     * enabled by using startScan().
-     *
-     * @Note: The scan interval and window are recommendations to the BLE stack.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.setScanTimeout(...) should be replaced with
-     * ble.gap().setScanTimeout(...).
-     */
-    ble_error_t setScanTimeout(uint16_t timeout) {
-        return gap().setScanTimeout(timeout);
-    }
-
-    /**
-     * Set up parameters for GAP scanning (observer mode).
-     * @param[in] activeScanning
-     *              Set to True if active-scanning is required. This is used to fetch the
-     *              scan response from a peer if possible.
-     *
-     * Once the scanning parameters have been configured, scanning can be
-     * enabled by using startScan().
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.setActiveScan(...) should be replaced with
-     * ble.gap().setActiveScanning(...).
-     */
-    void setActiveScan(bool activeScanning) {
-        gap().setActiveScanning(activeScanning);
-    }
-
-    /**
-     * Start scanning (Observer Procedure) based on the parameters currently in
-     * effect.
-     *
-     * @param[in] callback
-     *              The application-specific callback to be invoked upon
-     *              receiving every advertisement report. This can be passed in
-     *              as NULL, in which case scanning may not be enabled at all.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.startScan(callback) should be replaced with
-     * ble.gap().startScan(callback).
-     */
-    ble_error_t startScan(void (*callback)(const Gap::AdvertisementCallbackParams_t *params)) {
-        return gap().startScan(callback);
-    }
-
-    /**
-     * Same as above, but this takes an (object, method) pair for a callback.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.startScan(callback) should be replaced with
-     * ble.gap().startScan(object, callback).
-     */
-    template<typename T>
-    ble_error_t startScan(T *object, void (T::*memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
-
-    /**
-     * Stop scanning. The current scanning parameters remain in effect.
-     *
-     * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.stopScan() should be replaced with
-     * ble.gap().stopScan().
-     */
-    ble_error_t stopScan(void) {
-        return gap().stopScan();
-    }
-
-    /**
-     * Create a connection (GAP Link Establishment).
-     * @param peerAddr
-     *          48-bit address, LSB format.
-     * @param peerAddrType
-     *          Address type of the peer.
-     * @param connectionParams
-     *         Connection parameters.
-     * @param scanParams
-     *          Paramters to use while scanning for the peer.
-     * @return  BLE_ERROR_NONE if connection establishment procedure is started
-     *     successfully. The onConnection callback (if set) is invoked upon
-     *     a connection event.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.connect(...) should be replaced with
-     * ble.gap().connect(...).
-     */
-    ble_error_t connect(const BLEProtocol::AddressBytes_t  peerAddr,
-                        BLEProtocol::AddressType_t         peerAddrType = BLEProtocol::AddressType::RANDOM_STATIC,
-                        const Gap::ConnectionParams_t     *connectionParams = NULL,
-                        const GapScanningParams           *scanParams = NULL) {
-        return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
-    }
-
-    /**
-     * This call initiates the disconnection procedure, and its completion is
-     * communicated to the application with an invocation of the
-     * onDisconnection callback.
-     *
-     * @param[in] connectionHandle
-     * @param[in] reason
-     *              The reason for disconnection; sent back to the peer.
-     */
-    ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
-        return gap().disconnect(connectionHandle, reason);
-    }
-
-    /**
-     * This call initiates the disconnection procedure, and its completion
-     * is communicated to the application with an invocation of the
-     * onDisconnection callback.
-     *
-     * @param  reason
-     *           The reason for disconnection; sent back to the peer.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.disconnect(reason) should be replaced with
-     * ble.gap().disconnect(reason).
-     *
-     * @note: This version of disconnect() doesn't take a connection handle. It
-     * works reliably only for stacks that are limited to a single
-     * connection. This API should be considered *deprecated* in favour of the
-     * alternative, which takes a connection handle. It will be dropped in the future.
-     */
-    ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
-        return gap().disconnect(reason);
-    }
-
-    /**
-     * Returns the current GAP state of the device using a bitmask that
-     * describes whether the device is advertising or connected.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.getGapState() should be replaced with
-     * ble.gap().getState().
-     */
-    Gap::GapState_t getGapState(void) const {
-        return gap().getState();
-    }
-
-    /**
-     * Get the GAP peripheral's preferred connection parameters. These are the
-     * defaults that the peripheral would like to have in a connection. The
-     * choice of the connection parameters is eventually up to the central.
-     *
-     * @param[out] params
-     *               The structure where the parameters will be stored. Memory
-     *               for this is owned by the caller.
-     *
-     * @return BLE_ERROR_NONE if the parameters were successfully filled into
-     * the given structure pointed to by params.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.getPreferredConnectionParams() should be replaced with
-     * ble.gap().getPreferredConnectionParams().
-     */
-    ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
-        return gap().getPreferredConnectionParams(params);
-    }
-
-    /**
-     * Set the GAP peripheral's preferred connection parameters. These are the
-     * defaults that the peripheral would like to have in a connection. The
-     * choice of the connection parameters is eventually up to the central.
-     *
-     * @param[in] params
-     *               The structure containing the desired parameters.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.setPreferredConnectionParams() should be replaced with
-     * ble.gap().setPreferredConnectionParams().
-     */
-    ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
-        return gap().setPreferredConnectionParams(params);
-    }
-
-    /**
-     * Update connection parameters while in the peripheral role.
-     * @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
-     *          the central to perform the procedure.
-     * @param[in] handle
-     *              Connection Handle
-     * @param[in] params
-     *              Pointer to desired connection parameters. If NULL is provided on a peripheral role,
-     *              the parameters in the PPCP characteristic of the GAP service will be used instead.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.updateConnectionParams() should be replaced with
-     * ble.gap().updateConnectionParams().
-     */
-    ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
-        return gap().updateConnectionParams(handle, params);
-    }
-
-    /**
-     * Set the device name characteristic in the GAP service.
-     * @param[in] deviceName
-     *              The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.setDeviceName() should be replaced with
-     * ble.gap().setDeviceName().
-     */
-    ble_error_t setDeviceName(const uint8_t *deviceName) {
-        return gap().setDeviceName(deviceName);
-    }
-
-    /**
-     * Get the value of the device name characteristic in the GAP service.
-     * @param[out]    deviceName
-     *                  Pointer to an empty buffer where the UTF-8 *non NULL-
-     *                  terminated* string will be placed. Set this
-     *                  value to NULL in order to obtain the deviceName-length
-     *                  from the 'length' parameter.
-     *
-     * @param[in/out] lengthP
-     *                  (on input) Length of the buffer pointed to by deviceName;
-     *                  (on output) the complete device name length (without the
-     *                     null terminator).
-     *
-     * @note If the device name is longer than the size of the supplied buffer,
-     *     length will return the complete device name length, and not the
-     *     number of bytes actually returned in deviceName. The application may
-     *     use this information to retry with a suitable buffer size.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.getDeviceName() should be replaced with
-     * ble.gap().getDeviceName().
-     */
-    ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
-        return gap().getDeviceName(deviceName, lengthP);
-    }
-
-    /**
-     * Set the appearance characteristic in the GAP service.
-     * @param[in] appearance
-     *              The new value for the device-appearance.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.setAppearance() should be replaced with
-     * ble.gap().setAppearance().
-     */
-    ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
-        return gap().setAppearance(appearance);
-    }
-
-    /**
-     * Get the appearance characteristic in the GAP service.
-     * @param[out] appearance
-     *               The new value for the device-appearance.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.getAppearance() should be replaced with
-     * ble.gap().getAppearance().
-     */
-    ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
-        return gap().getAppearance(appearanceP);
-    }
-
-    /**
-     * Set the radio's transmit power.
-     * @param[in] txPower Radio transmit power in dBm.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.setTxPower() should be replaced with
-     * ble.gap().setTxPower().
-     */
-    ble_error_t setTxPower(int8_t txPower) {
-        return gap().setTxPower(txPower);
-    }
-
-    /**
-     * Query the underlying stack for permitted arguments for setTxPower().
-     *
-     * @param[out] valueArrayPP
-     *                 Out parameter to receive the immutable array of Tx values.
-     * @param[out] countP
-     *                 Out parameter to receive the array's size.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call to
-     * ble.getPermittedTxPowerValues() should be replaced with
-     * ble.gap().getPermittedTxPowerValues().
-     */
-    void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
-        gap().getPermittedTxPowerValues(valueArrayPP, countP);
-    }
-
-    /**
-     * Add a service declaration to the local server ATT table. Also add the
-     * characteristics contained within.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from GattServer directly. A former call
-     * to ble.addService() should be replaced with
-     * ble.gattServer().addService().
-     */
-    ble_error_t addService(GattService &service) {
-        return gattServer().addService(service);
-    }
-
-    /**
-     * Read the value of a characteristic from the local GattServer.
-     * @param[in]     attributeHandle
-     *                  Attribute handle for the value attribute of the characteristic.
-     * @param[out]    buffer
-     *                  A buffer to hold the value being read.
-     * @param[in/out] lengthP
-     *                  Length of the buffer being supplied. If the attribute
-     *                  value is longer than the size of the supplied buffer,
-     *                  this variable will return the total attribute value length
-     *                  (excluding offset). The application may use this
-     *                  information to allocate a suitable buffer size.
-     *
-     * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from GattServer directly. A former call
-     * to ble.readCharacteristicValue() should be replaced with
-     * ble.gattServer().read().
-     */
-    ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
-        return gattServer().read(attributeHandle, buffer, lengthP);
-    }
-
-    /**
-     * Read the value of a characteristic from the local GattServer.
-     * @param[in]     connectionHandle
-     *                  Connection Handle.
-     * @param[in]     attributeHandle
-     *                  Attribute handle for the value attribute of the characteristic.
-     * @param[out]    buffer
-     *                  A buffer to hold the value being read.
-     * @param[in/out] lengthP
-     *                  Length of the buffer being supplied. If the attribute
-     *                  value is longer than the size of the supplied buffer,
-     *                  this variable will return the total attribute value length
-     *                  (excluding offset). The application may use this
-     *                  information to allocate a suitable buffer size.
-     *
-     * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
-     *
-     * @note This API is a version of the above, with an additional connection handle
-     *     parameter to allow fetches for connection-specific multivalued
-     *     attributes (such as the CCCDs).
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from GattServer directly. A former call
-     * to ble.readCharacteristicValue() should be replaced with
-     * ble.gattServer().read().
-     */
-    ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
-        return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
-    }
-
-    /**
-     * Update the value of a characteristic on the local GattServer.
-     *
-     * @param[in] attributeHandle
-     *              Handle for the value attribute of the characteristic.
-     * @param[in] value
-     *              A pointer to a buffer holding the new value.
-     * @param[in] size
-     *              Size of the new value (in bytes).
-     * @param[in] localOnly
-     *              Should this update be kept on the local
-     *              GattServer regardless of the state of the
-     *              notify/indicate flag in the CCCD for this
-     *              characteristic? If set to true, no notification
-     *              or indication is generated.
-     *
-     * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from GattServer directly. A former call
-     * to ble.updateCharacteristicValue() should be replaced with
-     * ble.gattServer().write().
-     */
-    ble_error_t updateCharacteristicValue(GattAttribute::Handle_t  attributeHandle,
-                                          const uint8_t           *value,
-                                          uint16_t                 size,
-                                          bool                     localOnly = false) {
-        return gattServer().write(attributeHandle, value, size, localOnly);
-    }
-
-    /**
-     * Update the value of a characteristic on the local GattServer. A version
-     * of the above, with a connection handle parameter to allow updates
-     * for connection-specific multivalued attributes (such as the CCCDs).
-     *
-     * @param[in] connectionHandle
-     *              Connection Handle.
-     * @param[in] attributeHandle
-     *              Handle for the value attribute of the Characteristic.
-     * @param[in] value
-     *              A pointer to a buffer holding the new value.
-     * @param[in] size
-     *              Size of the new value (in bytes).
-     * @param[in] localOnly
-     *              Should this update be kept on the local
-     *              GattServer regardless of the state of the
-     *              notify/indicate flag in the CCCD for this
-     *              Characteristic? If set to true, no notification
-     *              or indication is generated.
-     *
-     * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from GattServer directly. A former call
-     * to ble.updateCharacteristicValue() should be replaced with
-     * ble.gattServer().write().
-     */
-    ble_error_t updateCharacteristicValue(Gap::Handle_t            connectionHandle,
-                                          GattAttribute::Handle_t  attributeHandle,
-                                          const uint8_t           *value,
-                                          uint16_t                 size,
-                                          bool                     localOnly = false) {
-        return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
-    }
-
-    /**
-     * Enable the BLE stack's Security Manager. The Security Manager implements
-     * the cryptographic algorithms and protocol exchanges that allow two
-     * devices to securely exchange data and privately detect each other.
-     * Calling this API is a prerequisite for encryption and pairing (bonding).
-     *
-     * @param[in]  enableBonding Allow for bonding.
-     * @param[in]  requireMITM   Require protection against man-in-the-middle attacks.
-     * @param[in]  iocaps        To specify the I/O capabilities of this peripheral,
-     *                           such as availability of a display or keyboard, to
-     *                           support out-of-band exchanges of security data.
-     * @param[in]  passkey       To specify a static passkey.
-     *
-     * @return BLE_ERROR_NONE on success.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from SecurityManager directly. A former
-     * call to ble.initializeSecurity(...) should be replaced with
-     * ble.securityManager().init(...).
-     */
-    ble_error_t initializeSecurity(bool                                      enableBonding = true,
-                                   bool                                      requireMITM   = true,
-                                   SecurityManager::SecurityIOCapabilities_t iocaps        = SecurityManager::IO_CAPS_NONE,
-                                   const SecurityManager::Passkey_t          passkey       = NULL) {
-        return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
-    }
-
-    /**
-     * Get the security status of a connection.
-     *
-     * @param[in]  connectionHandle   Handle to identify the connection.
-     * @param[out] securityStatusP    Security status.
-     *
-     * @return BLE_SUCCESS or appropriate error code indicating the reason of failure.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from SecurityManager directly. A former
-     * call to ble.getLinkSecurity(...) should be replaced with
-     * ble.securityManager().getLinkSecurity(...).
-     */
-    ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
-        return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
-    }
-
-    /**
-     * Delete all peer device context and all related bonding information from
-     * the database within the security manager.
-     *
-     * @retval BLE_ERROR_NONE             On success; else returns an error code indicating the reason for the failure.
-     * @retval BLE_ERROR_INVALID_STATE    If the API is called without module initialization or
-     *                                    application registration.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from SecurityManager directly. A former
-     * call to ble.purgeAllBondingState() should be replaced with
-     * ble.securityManager().purgeAllBondingState().
-     */
-    ble_error_t purgeAllBondingState(void) {
-        return securityManager().purgeAllBondingState();
-    }
-
-    /**
-     * Set up a callback for timeout events. Refer to Gap::TimeoutSource_t for
-     * possible event types.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call
-     * to ble.onTimeout(callback) should be replaced with
-     * ble.gap().onTimeout(callback).
-     */
-    void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
-        gap().onTimeout(timeoutCallback);
-    }
-
-    /**
-     * Set up a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call
-     * to ble.onConnection(callback) should be replaced with
-     * ble.gap().onConnection(callback).
-     */
-    void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
-        gap().onConnection(connectionCallback);
-    }
-
-    /**
-     * Append to a chain of callbacks to be invoked upon GAP disconnection.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call
-     * to ble.onDisconnection(callback) should be replaced with
-     * ble.gap().onDisconnection(callback).
-     */
-    void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
-        gap().onDisconnection(disconnectionCallback);
-    }
-
-    template<typename T>
-    void onDisconnection(T *tptr, void (T::*mptr)(const Gap::DisconnectionCallbackParams_t*)) {
-        gap().onDisconnection(tptr, mptr);
-    }
-
-    /**
-     * Radio Notification is a feature that enables ACTIVE and INACTIVE
-     * (nACTIVE) signals from the stack. These notify the application when the
-     * radio is in use. The signal is sent using software interrupt.
-     *
-     * The ACTIVE signal is sent before the radio event starts. The nACTIVE
-     * signal is sent at the end of the radio event. These signals can be used
-     * by the application programmer to synchronize application logic with radio
-     * activity. For example, the ACTIVE signal can be used to shut off external
-     * devices to manage peak current drawn during periods when the radio is on,
-     * or to trigger sensor data collection for transmission in the radio event.
-     *
-     * @param callback
-     *          The application handler to be invoked in response to a radio
-     *          ACTIVE/INACTIVE event.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from Gap directly. A former call
-     * to ble.onRadioNotification(...) should be replaced with
-     * ble.gap().onRadioNotification(...).
-     */
-    void onRadioNotification(void (*callback)(bool)) {
-        gap().onRadioNotification(callback);
-    }
-
-    /**
-     * Add a callback for the GATT event DATA_SENT (which is triggered when
-     * updates are sent out by GATT in the form of notifications).
-     *
-     * @Note: It is possible to chain together multiple onDataSent callbacks
-     * (potentially from different modules of an application) to receive updates
-     * to characteristics.
-     *
-     * @Note: It is also possible to set up a callback into a member function of
-     * some object.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from GattServer directly. A former call
-     * to ble.onDataSent(...) should be replaced with
-     * ble.gattServer().onDataSent(...).
-     */
-    void onDataSent(void (*callback)(unsigned count)) {
-        gattServer().onDataSent(callback);
-    }
-    template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
-        gattServer().onDataSent(objPtr, memberPtr);
-    }
-
-    /**
-     * Set up a callback for when an attribute has its value updated by or at the
-     * connected peer. For a peripheral, this callback is triggered when the local
-     * GATT server has an attribute updated by a write command from the peer.
-     * For a Central, this callback is triggered when a response is received for
-     * a write request.
-     *
-     * @Note: It is possible to chain together multiple onDataWritten callbacks
-     * (potentially from different modules of an application) to receive updates
-     * to characteristics. Many services, such as DFU and UART, add their own
-     * onDataWritten callbacks behind the scenes to trap interesting events.
-     *
-     * @Note: It is also possible to set up a callback into a member function of
-     * some object.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from GattServer directly. A former call
-     * to ble.onDataWritten(...) should be replaced with
-     * ble.gattServer().onDataWritten(...).
-     */
-    void onDataWritten(void (*callback)(const GattWriteCallbackParams *eventDataP)) {
-        gattServer().onDataWritten(callback);
-    }
-    template <typename T> void onDataWritten(T * objPtr, void (T::*memberPtr)(const GattWriteCallbackParams *context)) {
-        gattServer().onDataWritten(objPtr, memberPtr);
-    }
-
-    /**
-     * Set up a callback to be invoked on the peripheral when an attribute is
-     * being read by a remote client.
-     *
-     * @Note: This functionality may not be available on all underlying stacks.
-     * You could use GattCharacteristic::setReadAuthorizationCallback() as an
-     * alternative.
-     *
-     * @Note: It is possible to chain together multiple onDataRead callbacks
-     * (potentially from different modules of an application) to receive updates
-     * to characteristics. Services may add their own onDataRead callbacks
-     * behind the scenes to trap interesting events.
-     *
-     * @Note: It is also possible to set up a callback into a member function of
-     * some object.
-     *
-     * @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
-     *         else BLE_ERROR_NONE.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from GattServer directly. A former call
-     * to ble.onDataRead(...) should be replaced with
-     * ble.gattServer().onDataRead(...).
-     */
-    ble_error_t onDataRead(void (*callback)(const GattReadCallbackParams *eventDataP)) {
-        return gattServer().onDataRead(callback);
-    }
-    template <typename T> ble_error_t onDataRead(T * objPtr, void (T::*memberPtr)(const GattReadCallbackParams *context)) {
-        return gattServer().onDataRead(objPtr, memberPtr);
-    }
-
-    /**
-     * Set up a callback for when notifications or indications are enabled for a
-     * characteristic on the local GattServer.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from GattServer directly. A former call
-     * to ble.onUpdatesEnabled(callback) should be replaced with
-     * ble.gattServer().onUpdatesEnabled(callback).
-     */
-    void onUpdatesEnabled(GattServer::EventCallback_t callback) {
-        gattServer().onUpdatesEnabled(callback);
-    }
-
-    /**
-     * Set up a callback for when notifications or indications are disabled for a
-     * characteristic on the local GattServer.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from GattServer directly. A former call
-     * to ble.onUpdatesEnabled(callback) should be replaced with
-     * ble.gattServer().onUpdatesEnabled(callback).
-     */
-    void onUpdatesDisabled(GattServer::EventCallback_t callback) {
-        gattServer().onUpdatesDisabled(callback);
-    }
-
-    /**
-     * Set up a callback for when the GATT server receives a response for an
-     * indication event sent previously.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from GattServer directly. A former call
-     * to ble.onConfirmationReceived(callback) should be replaced with
-     * ble.gattServer().onConfirmationReceived(callback).
-     */
-    void onConfirmationReceived(GattServer::EventCallback_t callback) {
-        gattServer().onConfirmationReceived(callback);
-    }
-
-    /**
-     * Set up a callback for when the security setup procedure (key generation
-     * and exchange) for a link has started. This will be skipped for bonded
-     * devices. The callback is passed in parameters received from the peer's
-     * security request: bool allowBonding, bool requireMITM, and
-     * SecurityIOCapabilities_t.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from SecurityManager directly. A former
-     * call to ble.onSecuritySetupInitiated(callback) should be replaced with
-     * ble.securityManager().onSecuritySetupInitiated(callback).
-     */
-    void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
-        securityManager().onSecuritySetupInitiated(callback);
-    }
-
-    /**
-     * Set up a callback for when the security setup procedure (key generation
-     * and exchange) for a link has completed. This will be skipped for bonded
-     * devices. The callback is passed in the success/failure status of the
-     * security setup procedure.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from SecurityManager directly. A former
-     * call to ble.onSecuritySetupCompleted(callback) should be replaced with
-     * ble.securityManager().onSecuritySetupCompleted(callback).
-     */
-    void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
-        securityManager().onSecuritySetupCompleted(callback);
-    }
-
-    /**
-     * Set up a callback for when a link with the peer is secured. For bonded
-     * devices, subsequent reconnections with a bonded peer will result only in
-     * this callback when the link is secured, and setup procedures will not
-     * occur unless the bonding information is either lost or deleted on either
-     * or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
-     * to the level of security in effect for the secured link.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from SecurityManager directly. A former
-     * call to ble.onLinkSecured(callback) should be replaced with
-     * ble.securityManager().onLinkSecured(callback).
-     */
-    void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
-        securityManager().onLinkSecured(callback);
-    }
-
-    /**
-     * Set up a callback for successful bonding, meaning that link-specific security
-     * context is stored persistently for a peer device.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from SecurityManager directly. A former
-     * call to ble.onSecurityContextStored(callback) should be replaced with
-     * ble.securityManager().onSecurityContextStored(callback).
-     */
-    void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
-        securityManager().onSecurityContextStored(callback);
-    }
-
-    /**
-     * Set up a callback for when the passkey needs to be displayed on a
-     * peripheral with DISPLAY capability. This happens when security is
-     * configured to prevent Man-In-The-Middle attacks, and the peers need to exchange
-     * a passkey (or PIN) to authenticate the connection
-     * attempt.
-     *
-     * @note: This API is now *deprecated* and will be dropped in the future.
-     * You should use the parallel API from SecurityManager directly. A former
-     * call to ble.onPasskeyDisplay(callback) should be replaced with
-     * ble.securityManager().onPasskeyDisplay(callback).
-     */
-    void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
-        return securityManager().onPasskeyDisplay(callback);
-    }
-
-private:
-    /**
-     * Implementation of init() [internal to BLE_API].
-     *
-     * The implementation is separated into a private method because it isn't
-     * suitable to be included in the header.
-     */
-    ble_error_t initImplementation(FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback);
-
-private:
-    BLE(const BLE&);
-    BLE &operator=(const BLE &);
-
-private:
-    InstanceID_t     instanceID;
-    BLEInstanceBase *transport; /* The device-specific backend */
-};
-
-typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
-                        * code. Will be dropped at some point soon.*/
-
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __BLE_H__
+#define __BLE_H__
+
+#include "blecommon.h"
+#include "Gap.h"
+#include "GattServer.h"
+#include "GattClient.h"
+
+#include "ble/FunctionPointerWithContext.h"
+
+#ifdef YOTTA_CFG_MBED_OS
+#include "mbed-drivers/mbed_error.h"
+#else
+#include "mbed_error.h"
+#endif
+
+/* Forward declaration for the implementation class */
+class BLEInstanceBase;
+
+/**
+ * The base class used to abstract away BLE-capable radio transceivers or SOCs,
+ * so that the BLE API can work with any radio transparently.
+ */
+class BLE
+{
+public:
+    typedef unsigned InstanceID_t; /** The type returned by BLE::getInstanceID(). */
+
+    /**
+     * The context provided to init-completion-callbacks (see init() below).
+     *
+     * @param  ble
+     *             A reference to the BLE instance being initialized.
+     * @param  error
+     *             Captures the result of initialization. It is set to
+     *             BLE_ERROR_NONE if initialization completed successfully. Else
+     *             the error value is implementation specific.
+     */
+    struct InitializationCompleteCallbackContext {
+        BLE&        ble;   /* Reference to the BLE object that has been initialized */
+        ble_error_t error; /* Error status of the initialization. It is set to BLE_ERROR_NONE if initialization completed successfully. */
+    };
+
+    /**
+     * The signature for function-pointer like callbacks for initialization-completion.
+     *
+     * @note There are two versions of init(). In addition to the simple
+     *     function-pointer, init() can also take a <Object, member> tuple as its
+     *     callback target. In case of the latter, the following declaration doesn't apply.
+     */
+    typedef void (*InitializationCompleteCallback_t)(InitializationCompleteCallbackContext *context);
+
+    /**
+     * Initialize the BLE controller. This should be called before using
+     * anything else in the BLE_API.
+     *
+     * init() hands control to the underlying BLE module to accomplish
+     * initialization. This initialization may tacitly depend on other hardware
+     * setup (such as clocks or power-modes) that happens early on during
+     * system startup. It may not be safe to call init() from a global static
+     * context where ordering is compiler-specific and can't be guaranteed - it
+     * is safe to call BLE::init() from within main().
+     *
+     * @param  initCompleteCallback
+     *           A callback for when initialization completes for a BLE
+     *           instance. This is an optional parameter; if no callback is
+     *           set up the application can still determine the status of
+     *           initialization using BLE::hasInitialized() (see below).
+     *
+     * @return  BLE_ERROR_NONE if the initialization procedure was started
+     *     successfully.
+     *
+     * @note If init() returns BLE_ERROR_NONE, the underlying stack must invoke
+     *     the initialization completion callback at some point.
+     *
+     * @note In some cases, initialization is instantaneous (or blocking); if
+     *     so, it is acceptable for the stack-specific implementation of init()
+     *     to invoke the completion callback directly (within its own
+     *     context).
+     *
+     * @note Nearly all BLE APIs would return
+     *     BLE_ERROR_INITIALIZATION_INCOMPLETE if used on an instance before the
+     *     corresponding transport is initialized.
+     *
+     * @note There are two versions of init(). In addition to the simple
+     *     function-pointer, init() can also take an <Object, member> tuple as its
+     *     callback target.
+     */
+    ble_error_t init(InitializationCompleteCallback_t initCompleteCallback = NULL) {
+        FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(initCompleteCallback);
+        return initImplementation(callback);
+    }
+
+    /**
+     * An alternate declaration for init(). This one takes an <Object, member> tuple as its
+     * callback target.
+     */
+    template<typename T>
+    ble_error_t init(T *object, void (T::*initCompleteCallback)(InitializationCompleteCallbackContext *context)) {
+        FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(object, initCompleteCallback);
+        return initImplementation(callback);
+    }
+
+    /**
+     * @return true if initialization has completed for the underlying BLE
+     *     transport.
+     *
+     * The application can set up a callback to signal completion of
+     * initialization when using init(). Otherwise, this method can be used to
+     * poll the state of initialization.
+     */
+    bool hasInitialized(void) const;
+
+    /**
+     * Purge the BLE stack of GATT and GAP state. init() must be called
+     * afterwards to re-instate services and GAP state. This API offers a way to
+     * repopulate the GATT database with new services and characteristics.
+     */
+    ble_error_t shutdown(void);
+
+    /**
+     * This call allows the application to get the BLE stack version information.
+     *
+     * @return  A pointer to a const string representing the version.
+     *          Note: The string is owned by BLE_API.
+     */
+    const char *getVersion(void);
+
+    /*
+     * Accessors to GAP. Please refer to Gap.h. All GAP related functionality requires
+     * going through this accessor.
+     */
+    const Gap &gap() const;
+    Gap &gap();
+
+    /*
+     * Accessors to GATT Server. Please refer to GattServer.h. All GATTServer related
+     * functionality requires going through this accessor.
+     */
+    const GattServer& gattServer() const;
+    GattServer& gattServer();
+
+    /*
+     * Accessors to GATT Client. Please refer to GattClient.h. All GATTClient related
+     * functionality requires going through this accessor.
+     */
+    const GattClient& gattClient() const;
+    GattClient& gattClient();
+
+    /*
+     * Accessors to Security Manager. Please refer to SecurityManager.h. All
+     * SecurityManager related functionality requires going through this
+     * accessor.
+     */
+    const SecurityManager& securityManager() const;
+    SecurityManager& securityManager();
+
+    /**
+     * Yield control to the BLE stack or to other tasks waiting for events. This
+     * is a sleep function that will return when there is an application-specific
+     * interrupt, but the MCU might wake up several times before
+     * returning (to service the stack). This is not always interchangeable with
+     * WFE().
+     */
+    void waitForEvent(void);
+
+public:
+    static const InstanceID_t DEFAULT_INSTANCE = 0;
+#ifndef YOTTA_CFG_BLE_INSTANCES_COUNT
+    static const InstanceID_t NUM_INSTANCES = 1;
+#else
+    static const InstanceID_t NUM_INSTANCES = YOTTA_CFG_BLE_INSTANCES_COUNT;
+#endif
+
+    /**
+     * Get a reference to the BLE singleton corresponding to a given interface.
+     * There is a static array of BLE singletons.
+     *
+     * @Note: Calling Instance() is preferred over constructing a BLE object
+     * directly, as it returns references to singletons.
+     *
+     * @param[in] id
+     *              Instance-ID. This should be less than NUM_INSTANCES 
+     *              for the returned BLE singleton to be useful.
+     *
+     * @return a reference to a single object.
+     */
+    static BLE &Instance(InstanceID_t id = DEFAULT_INSTANCE);
+
+    /**
+     * Constructor for a handle to a BLE instance (the BLE stack). BLE handles
+     * are thin wrappers around a transport object (that is, ptr. to
+     * BLEInstanceBase).
+     *
+     * It is better to create BLE objects as singletons accessed through the
+     * Instance() method. If multiple BLE handles are constructed for the same
+     * interface (using this constructor), they will share the same underlying
+     * transport object.
+     */
+    BLE(InstanceID_t instanceID = DEFAULT_INSTANCE);
+
+    /**
+     * Fetch the ID of a BLE instance. Typically there would only be the DEFAULT_INSTANCE.
+     */
+    InstanceID_t getInstanceID(void) const {
+        return instanceID;
+    }
+
+    /*
+     * Deprecation alert!
+     * All of the following are deprecated and may be dropped in a future
+     * release. Documentation should refer to alternative APIs.
+     */
+
+    /* GAP specific APIs. */
+public:
+    /**
+     * Set the BTLE MAC address and type.
+     * @return BLE_ERROR_NONE on success.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.setAddress(...) should be replaced with
+     * ble.gap().setAddress(...).
+     */
+    ble_error_t setAddress(Gap::AddressType_t type, const Gap::Address_t address) {
+        return gap().setAddress(type, address);
+    }
+
+    /**
+     * Fetch the BTLE MAC address and type.
+     * @return BLE_ERROR_NONE on success.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.getAddress(...) should be replaced with
+     * ble.gap().getAddress(...).
+     */
+    ble_error_t getAddress(Gap::AddressType_t *typeP, Gap::Address_t address) {
+        return gap().getAddress(typeP, address);
+    }
+
+    /**
+     * Set the GAP advertising mode to use for this device.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.setAdvertisingType(...) should be replaced with
+     * ble.gap().setAdvertisingType(...).
+     */
+    void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
+        gap().setAdvertisingType(advType);
+    }
+
+    /**
+     * @param[in] interval
+     *              Advertising interval in units of milliseconds. Advertising
+     *              is disabled if interval is 0. If interval is smaller than
+     *              the minimum supported value, then the minimum supported
+     *              value is used instead. This minimum value can be discovered
+     *              using getMinAdvertisingInterval().
+     *
+     *              This field must be set to 0 if connectionMode is equal
+     *              to ADV_CONNECTABLE_DIRECTED.
+     *
+     * @note: Decreasing this value allows central devices to detect a
+     * peripheral faster, at the expense of more power being used by the radio
+     * due to the higher data transmit rate.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.setAdvertisingInterval(...) should be replaced with
+     * ble.gap().setAdvertisingInterval(...).
+     *
+     * @note: [WARNING] This API previously used 0.625ms as the unit for its
+     * 'interval' argument. That required an explicit conversion from
+     * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
+     * no longer required as the new units are milliseconds. Any application
+     * code depending on the old semantics needs to be updated accordingly.
+     */
+    void setAdvertisingInterval(uint16_t interval) {
+        gap().setAdvertisingInterval(interval);
+    }
+
+    /**
+     * @return Minimum Advertising interval in milliseconds.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.getMinAdvertisingInterval(...) should be replaced with
+     * ble.gap().getMinAdvertisingInterval(...).
+     */
+    uint16_t getMinAdvertisingInterval(void) const {
+        return gap().getMinAdvertisingInterval();
+    }
+
+    /**
+     * @return Minimum Advertising interval in milliseconds for non-connectible mode.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
+     * ble.gap().getMinNonConnectableAdvertisingInterval(...).
+     */
+    uint16_t getMinNonConnectableAdvertisingInterval(void) const {
+        return gap().getMinNonConnectableAdvertisingInterval();
+    }
+
+    /**
+     * @return Maximum Advertising interval in milliseconds.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.getMaxAdvertisingInterval(...) should be replaced with
+     * ble.gap().getMaxAdvertisingInterval(...).
+     */
+    uint16_t getMaxAdvertisingInterval(void) const {
+        return gap().getMaxAdvertisingInterval();
+    }
+
+    /**
+     * @param[in] timeout
+     *              Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
+     *              and 16383). Use 0 to disable the advertising timeout.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.setAdvertisingTimeout(...) should be replaced with
+     * ble.gap().setAdvertisingTimeout(...).
+     */
+    void setAdvertisingTimeout(uint16_t timeout) {
+        gap().setAdvertisingTimeout(timeout);
+    }
+
+    /**
+     * Set up a particular, user-constructed set of advertisement parameters for
+     * the underlying stack. It would be uncommon for this API to be used
+     * directly; there are other APIs to tweak advertisement parameters
+     * individually (see above).
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.setAdvertisingParams(...) should be replaced with
+     * ble.gap().setAdvertisingParams(...).
+     */
+    void setAdvertisingParams(const GapAdvertisingParams &advParams) {
+        gap().setAdvertisingParams(advParams);
+    }
+
+    /**
+     * @return  Read back advertising parameters. Useful for storing and
+     *          restoring parameters rapidly.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.getAdvertisingParams(...) should be replaced with
+     * ble.gap().getAdvertisingParams(...).
+     */
+    const GapAdvertisingParams &getAdvertisingParams(void) const {
+        return gap().getAdvertisingParams();
+    }
+
+    /**
+     * Accumulate an AD structure in the advertising payload. Please note that
+     * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
+     * as an additional 31 bytes if the advertising payload is too
+     * small.
+     *
+     * @param[in] flags
+     *              The flags to add. Please refer to
+     *              GapAdvertisingData::Flags for valid flags. Multiple
+     *              flags may be specified in combination.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.accumulateAdvertisingPayload(flags) should be replaced with
+     * ble.gap().accumulateAdvertisingPayload(flags).
+     */
+    ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
+        return gap().accumulateAdvertisingPayload(flags);
+    }
+
+    /**
+     * Accumulate an AD structure in the advertising payload. Please note that
+     * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
+     * as an additional 31 bytes if the advertising payload is too
+     * small.
+     *
+     * @param[in] app
+     *              The appearance of the peripheral.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.accumulateAdvertisingPayload(appearance) should be replaced with
+     * ble.gap().accumulateAdvertisingPayload(appearance).
+     */
+    ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
+        return gap().accumulateAdvertisingPayload(app);
+    }
+
+    /**
+     * Accumulate an AD structure in the advertising payload. Please note that
+     * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
+     * as an additional 31 bytes if the advertising payload is too
+     * small.
+     *
+     * @param[in] app
+     *              The max transmit power to be used by the controller. This
+     *              is only a hint.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
+     * ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
+     */
+    ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
+        return gap().accumulateAdvertisingPayloadTxPower(power);
+    }
+
+    /**
+     * Accumulate a variable length byte-stream as an AD structure in the
+     * advertising payload. Please note that the payload is limited to 31 bytes.
+     * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
+     * advertising payload is too small.
+     *
+     * @param  type The type that describes the variable length data.
+     * @param  data Data bytes.
+     * @param  len  Data length.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.accumulateAdvertisingPayload(...) should be replaced with
+     * ble.gap().accumulateAdvertisingPayload(...).
+     */
+    ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
+        return gap().accumulateAdvertisingPayload(type, data, len);
+    }
+
+    /**
+     * Setup a particular, user-constructed advertisement payload for the
+     * underlying stack. It would be uncommon for this API to be used directly;
+     * there are other APIs to build an advertisement payload (see above).
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.setAdvertisingData(...) should be replaced with
+     * ble.gap().setAdvertisingPayload(...).
+     */
+    ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
+        return gap().setAdvertisingPayload(advData);
+    }
+
+    /**
+     * @return  Read back advertising data. Useful for storing and
+     *          restoring payload.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.getAdvertisingData(...) should be replaced with
+     * ble.gap().getAdvertisingPayload()(...).
+     */
+    const GapAdvertisingData &getAdvertisingData(void) const {
+        return gap().getAdvertisingPayload();
+    }
+
+    /**
+     * Reset any advertising payload prepared from prior calls to
+     * accumulateAdvertisingPayload(). This automatically propagates the re-
+     * initialized advertising payload to the underlying stack.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.clearAdvertisingPayload(...) should be replaced with
+     * ble.gap().clearAdvertisingPayload(...).
+     */
+    void clearAdvertisingPayload(void) {
+        gap().clearAdvertisingPayload();
+    }
+
+    /**
+     * This API is *deprecated* and resolves to a no-operation. It is left here
+     * to allow older code to compile. Please avoid using this API in new code.
+     * This API will be dropped in a future release.
+     *
+     * Formerly, it would be used to dynamically reset the accumulated advertising
+     * payload and scanResponse; to do this, the application would clear and re-
+     * accumulate a new advertising payload (and scanResponse) before using this
+     * API. Updates to the underlying advertisement payload now happen
+     * implicitly.
+     */
+    ble_error_t setAdvertisingPayload(void) {
+        return BLE_ERROR_NONE;
+    }
+
+    /**
+     * Accumulate a variable length byte-stream as an AD structure in the
+     * scanResponse payload.
+     *
+     * @param[in] type The type that describes the variable length data.
+     * @param[in] data Data bytes.
+     * @param[in] len  Data length.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.accumulateScanResponse(...) should be replaced with
+     * ble.gap().accumulateScanResponse(...).
+     */
+    ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
+        return gap().accumulateScanResponse(type, data, len);
+    }
+
+    /**
+     * Reset any scan response prepared from prior calls to
+     * accumulateScanResponse().
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.clearScanResponse(...) should be replaced with
+     * ble.gap().clearScanResponse(...).
+     */
+    void clearScanResponse(void) {
+        gap().clearScanResponse();
+    }
+
+    /**
+     * Start advertising.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.startAdvertising(...) should be replaced with
+     * ble.gap().startAdvertising(...).
+     */
+    ble_error_t startAdvertising(void) {
+        return gap().startAdvertising();
+    }
+
+    /**
+     * Stop advertising.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.stopAdvertising(...) should be replaced with
+     * ble.gap().stopAdvertising(...).
+     */
+    ble_error_t stopAdvertising(void) {
+        return gap().stopAdvertising();
+    }
+
+    /**
+     * Set up parameters for GAP scanning (observer mode).
+     * @param[in] interval
+     *              Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
+     * @param[in] window
+     *              Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
+     * @param[in] timeout
+     *              Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
+     * @param[in] activeScanning
+     *              Set to True if active-scanning is required. This is used to fetch the
+     *              scan response from a peer if possible.
+     *
+     * The scanning window divided by the interval determines the duty cycle for
+     * scanning. For example, if the interval is 100ms and the window is 10ms,
+     * then the controller will scan for 10 percent of the time. It is possible
+     * to have the interval and window set to the same value. In this case,
+     * scanning is continuous, with a change of scanning frequency once every
+     * interval.
+     *
+     * Once the scanning parameters have been configured, scanning can be
+     * enabled by using startScan().
+     *
+     * @Note: The scan interval and window are recommendations to the BLE stack.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.setScanParams(...) should be replaced with
+     * ble.gap().setScanParams(...).
+     */
+    ble_error_t setScanParams(uint16_t interval       = GapScanningParams::SCAN_INTERVAL_MAX,
+                              uint16_t window         = GapScanningParams::SCAN_WINDOW_MAX,
+                              uint16_t timeout        = 0,
+                              bool     activeScanning = false) {
+        return gap().setScanParams(interval, window, timeout, activeScanning);
+    }
+
+    /**
+     * Set up the scanInterval parameter for GAP scanning (observer mode).
+     * @param[in] interval
+     *              Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
+     *
+     * The scanning window divided by the interval determines the duty cycle for
+     * scanning. For example, if the interval is 100ms and the window is 10ms,
+     * then the controller will scan for 10 percent of the time. It is possible
+     * to have the interval and window set to the same value. In this case,
+     * scanning is continuous, with a change of scanning frequency once every
+     * interval.
+     *
+     * Once the scanning parameters have been configured, scanning can be
+     * enabled by using startScan().
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.setScanInterval(interval) should be replaced with
+     * ble.gap().setScanInterval(interval).
+     */
+    ble_error_t setScanInterval(uint16_t interval) {
+        return gap().setScanInterval(interval);
+    }
+
+    /**
+     * Set up the scanWindow parameter for GAP scanning (observer mode).
+     * @param[in] window
+     *              Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
+     *
+     * The scanning window divided by the interval determines the duty cycle for
+     * scanning. For example, if the interval is 100ms and the window is 10ms,
+     * then the controller will scan for 10 percent of the time. It is possible
+     * to have the interval and window set to the same value. In this case,
+     * scanning is continuous, with a change of scanning frequency once every
+     * interval.
+     *
+     * Once the scanning parameters have been configured, scanning can be
+     * enabled by using startScan().
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.setScanWindow(window) should be replaced with
+     * ble.gap().setScanWindow(window).
+     */
+    ble_error_t setScanWindow(uint16_t window) {
+        return gap().setScanWindow(window);
+    }
+
+    /**
+     * Set up parameters for GAP scanning (observer mode).
+     * @param[in] timeout
+     *              Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
+     *
+     * The scanning window divided by the interval determines the duty cycle for
+     * scanning. For example, if the interval is 100ms and the window is 10ms,
+     * then the controller will scan for 10 percent of the time. It is possible
+     * to have the interval and window set to the same value. In this case,
+     * scanning is continuous, with a change of scanning frequency once every
+     * interval.
+     *
+     * Once the scanning parameters have been configured, scanning can be
+     * enabled by using startScan().
+     *
+     * @Note: The scan interval and window are recommendations to the BLE stack.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.setScanTimeout(...) should be replaced with
+     * ble.gap().setScanTimeout(...).
+     */
+    ble_error_t setScanTimeout(uint16_t timeout) {
+        return gap().setScanTimeout(timeout);
+    }
+
+    /**
+     * Set up parameters for GAP scanning (observer mode).
+     * @param[in] activeScanning
+     *              Set to True if active-scanning is required. This is used to fetch the
+     *              scan response from a peer if possible.
+     *
+     * Once the scanning parameters have been configured, scanning can be
+     * enabled by using startScan().
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.setActiveScan(...) should be replaced with
+     * ble.gap().setActiveScanning(...).
+     */
+    void setActiveScan(bool activeScanning) {
+        gap().setActiveScanning(activeScanning);
+    }
+
+    /**
+     * Start scanning (Observer Procedure) based on the parameters currently in
+     * effect.
+     *
+     * @param[in] callback
+     *              The application-specific callback to be invoked upon
+     *              receiving every advertisement report. This can be passed in
+     *              as NULL, in which case scanning may not be enabled at all.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.startScan(callback) should be replaced with
+     * ble.gap().startScan(callback).
+     */
+    ble_error_t startScan(void (*callback)(const Gap::AdvertisementCallbackParams_t *params)) {
+        return gap().startScan(callback);
+    }
+
+    /**
+     * Same as above, but this takes an (object, method) pair for a callback.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.startScan(callback) should be replaced with
+     * ble.gap().startScan(object, callback).
+     */
+    template<typename T>
+    ble_error_t startScan(T *object, void (T::*memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
+
+    /**
+     * Stop scanning. The current scanning parameters remain in effect.
+     *
+     * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.stopScan() should be replaced with
+     * ble.gap().stopScan().
+     */
+    ble_error_t stopScan(void) {
+        return gap().stopScan();
+    }
+
+    /**
+     * Create a connection (GAP Link Establishment).
+     * @param peerAddr
+     *          48-bit address, LSB format.
+     * @param peerAddrType
+     *          Address type of the peer.
+     * @param connectionParams
+     *         Connection parameters.
+     * @param scanParams
+     *          Paramters to use while scanning for the peer.
+     * @return  BLE_ERROR_NONE if connection establishment procedure is started
+     *     successfully. The onConnection callback (if set) is invoked upon
+     *     a connection event.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.connect(...) should be replaced with
+     * ble.gap().connect(...).
+     */
+    ble_error_t connect(const Gap::Address_t           peerAddr,
+                        Gap::AddressType_t             peerAddrType = Gap::ADDR_TYPE_RANDOM_STATIC,
+                        const Gap::ConnectionParams_t *connectionParams = NULL,
+                        const GapScanningParams       *scanParams = NULL) {
+        return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
+    }
+
+    /**
+     * This call initiates the disconnection procedure, and its completion is
+     * communicated to the application with an invocation of the
+     * onDisconnection callback.
+     *
+     * @param[in] connectionHandle
+     * @param[in] reason
+     *              The reason for disconnection; sent back to the peer.
+     */
+    ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
+        return gap().disconnect(connectionHandle, reason);
+    }
+
+    /**
+     * This call initiates the disconnection procedure, and its completion 
+     * is communicated to the application with an invocation of the
+     * onDisconnection callback.
+     *
+     * @param  reason
+     *           The reason for disconnection; sent back to the peer.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.disconnect(reason) should be replaced with
+     * ble.gap().disconnect(reason).
+     *
+     * @note: This version of disconnect() doesn't take a connection handle. It
+     * works reliably only for stacks that are limited to a single
+     * connection. This API should be considered *deprecated* in favour of the
+     * alternative, which takes a connection handle. It will be dropped in the future.
+     */
+    ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
+        return gap().disconnect(reason);
+    }
+
+    /**
+     * Returns the current GAP state of the device using a bitmask that
+     * describes whether the device is advertising or connected.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.getGapState() should be replaced with
+     * ble.gap().getState().
+     */
+    Gap::GapState_t getGapState(void) const {
+        return gap().getState();
+    }
+
+    /**
+     * Get the GAP peripheral's preferred connection parameters. These are the
+     * defaults that the peripheral would like to have in a connection. The
+     * choice of the connection parameters is eventually up to the central.
+     *
+     * @param[out] params
+     *               The structure where the parameters will be stored. Memory
+     *               for this is owned by the caller.
+     *
+     * @return BLE_ERROR_NONE if the parameters were successfully filled into
+     * the given structure pointed to by params.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.getPreferredConnectionParams() should be replaced with
+     * ble.gap().getPreferredConnectionParams().
+     */
+    ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
+        return gap().getPreferredConnectionParams(params);
+    }
+
+    /**
+     * Set the GAP peripheral's preferred connection parameters. These are the
+     * defaults that the peripheral would like to have in a connection. The
+     * choice of the connection parameters is eventually up to the central.
+     *
+     * @param[in] params
+     *               The structure containing the desired parameters.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.setPreferredConnectionParams() should be replaced with
+     * ble.gap().setPreferredConnectionParams().
+     */
+    ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
+        return gap().setPreferredConnectionParams(params);
+    }
+
+    /**
+     * Update connection parameters while in the peripheral role.
+     * @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
+     *          the central to perform the procedure.
+     * @param[in] handle
+     *              Connection Handle
+     * @param[in] params
+     *              Pointer to desired connection parameters. If NULL is provided on a peripheral role,
+     *              the parameters in the PPCP characteristic of the GAP service will be used instead.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.updateConnectionParams() should be replaced with
+     * ble.gap().updateConnectionParams().
+     */
+    ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
+        return gap().updateConnectionParams(handle, params);
+    }
+
+    /**
+     * Set the device name characteristic in the GAP service.
+     * @param[in] deviceName
+     *              The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.setDeviceName() should be replaced with
+     * ble.gap().setDeviceName().
+     */
+    ble_error_t setDeviceName(const uint8_t *deviceName) {
+        return gap().setDeviceName(deviceName);
+    }
+
+    /**
+     * Get the value of the device name characteristic in the GAP service.
+     * @param[out]    deviceName
+     *                  Pointer to an empty buffer where the UTF-8 *non NULL-
+     *                  terminated* string will be placed. Set this
+     *                  value to NULL in order to obtain the deviceName-length
+     *                  from the 'length' parameter.
+     *
+     * @param[in/out] lengthP
+     *                  (on input) Length of the buffer pointed to by deviceName;
+     *                  (on output) the complete device name length (without the
+     *                     null terminator).
+     *
+     * @note If the device name is longer than the size of the supplied buffer,
+     *     length will return the complete device name length, and not the
+     *     number of bytes actually returned in deviceName. The application may
+     *     use this information to retry with a suitable buffer size.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.getDeviceName() should be replaced with
+     * ble.gap().getDeviceName().
+     */
+    ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
+        return gap().getDeviceName(deviceName, lengthP);
+    }
+
+    /**
+     * Set the appearance characteristic in the GAP service.
+     * @param[in] appearance
+     *              The new value for the device-appearance.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.setAppearance() should be replaced with
+     * ble.gap().setAppearance().
+     */
+    ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
+        return gap().setAppearance(appearance);
+    }
+
+    /**
+     * Get the appearance characteristic in the GAP service.
+     * @param[out] appearance
+     *               The new value for the device-appearance.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.getAppearance() should be replaced with
+     * ble.gap().getAppearance().
+     */
+    ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
+        return gap().getAppearance(appearanceP);
+    }
+
+    /**
+     * Set the radio's transmit power.
+     * @param[in] txPower Radio transmit power in dBm.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.setTxPower() should be replaced with
+     * ble.gap().setTxPower().
+     */
+    ble_error_t setTxPower(int8_t txPower) {
+        return gap().setTxPower(txPower);
+    }
+
+    /**
+     * Query the underlying stack for permitted arguments for setTxPower().
+     *
+     * @param[out] valueArrayPP
+     *                 Out parameter to receive the immutable array of Tx values.
+     * @param[out] countP
+     *                 Out parameter to receive the array's size.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call to
+     * ble.getPermittedTxPowerValues() should be replaced with
+     * ble.gap().getPermittedTxPowerValues().
+     */
+    void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
+        gap().getPermittedTxPowerValues(valueArrayPP, countP);
+    }
+
+    /**
+     * Add a service declaration to the local server ATT table. Also add the
+     * characteristics contained within.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from GattServer directly. A former call
+     * to ble.addService() should be replaced with
+     * ble.gattServer().addService().
+     */
+    ble_error_t addService(GattService &service) {
+        return gattServer().addService(service);
+    }
+
+    /**
+     * Read the value of a characteristic from the local GattServer.
+     * @param[in]     attributeHandle
+     *                  Attribute handle for the value attribute of the characteristic.
+     * @param[out]    buffer
+     *                  A buffer to hold the value being read.
+     * @param[in/out] lengthP
+     *                  Length of the buffer being supplied. If the attribute
+     *                  value is longer than the size of the supplied buffer,
+     *                  this variable will return the total attribute value length
+     *                  (excluding offset). The application may use this
+     *                  information to allocate a suitable buffer size.
+     *
+     * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from GattServer directly. A former call
+     * to ble.readCharacteristicValue() should be replaced with
+     * ble.gattServer().read().
+     */
+    ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
+        return gattServer().read(attributeHandle, buffer, lengthP);
+    }
+
+    /**
+     * Read the value of a characteristic from the local GattServer.
+     * @param[in]     connectionHandle
+     *                  Connection Handle.
+     * @param[in]     attributeHandle
+     *                  Attribute handle for the value attribute of the characteristic.
+     * @param[out]    buffer
+     *                  A buffer to hold the value being read.
+     * @param[in/out] lengthP
+     *                  Length of the buffer being supplied. If the attribute
+     *                  value is longer than the size of the supplied buffer,
+     *                  this variable will return the total attribute value length
+     *                  (excluding offset). The application may use this
+     *                  information to allocate a suitable buffer size.
+     *
+     * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
+     *
+     * @note This API is a version of the above, with an additional connection handle
+     *     parameter to allow fetches for connection-specific multivalued
+     *     attributes (such as the CCCDs).
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from GattServer directly. A former call
+     * to ble.readCharacteristicValue() should be replaced with
+     * ble.gattServer().read().
+     */
+    ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
+        return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
+    }
+
+    /**
+     * Update the value of a characteristic on the local GattServer.
+     *
+     * @param[in] attributeHandle
+     *              Handle for the value attribute of the characteristic.
+     * @param[in] value
+     *              A pointer to a buffer holding the new value.
+     * @param[in] size
+     *              Size of the new value (in bytes).
+     * @param[in] localOnly
+     *              Should this update be kept on the local
+     *              GattServer regardless of the state of the
+     *              notify/indicate flag in the CCCD for this
+     *              characteristic? If set to true, no notification
+     *              or indication is generated.
+     *
+     * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from GattServer directly. A former call
+     * to ble.updateCharacteristicValue() should be replaced with
+     * ble.gattServer().write().
+     */
+    ble_error_t updateCharacteristicValue(GattAttribute::Handle_t  attributeHandle,
+                                          const uint8_t           *value,
+                                          uint16_t                 size,
+                                          bool                     localOnly = false) {
+        return gattServer().write(attributeHandle, value, size, localOnly);
+    }
+
+    /**
+     * Update the value of a characteristic on the local GattServer. A version
+     * of the above, with a connection handle parameter to allow updates
+     * for connection-specific multivalued attributes (such as the CCCDs).
+     *
+     * @param[in] connectionHandle
+     *              Connection Handle.
+     * @param[in] attributeHandle
+     *              Handle for the value attribute of the Characteristic.
+     * @param[in] value
+     *              A pointer to a buffer holding the new value.
+     * @param[in] size
+     *              Size of the new value (in bytes).
+     * @param[in] localOnly
+     *              Should this update be kept on the local
+     *              GattServer regardless of the state of the
+     *              notify/indicate flag in the CCCD for this
+     *              Characteristic? If set to true, no notification
+     *              or indication is generated.
+     *
+     * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from GattServer directly. A former call
+     * to ble.updateCharacteristicValue() should be replaced with
+     * ble.gattServer().write().
+     */
+    ble_error_t updateCharacteristicValue(Gap::Handle_t            connectionHandle,
+                                          GattAttribute::Handle_t  attributeHandle,
+                                          const uint8_t           *value,
+                                          uint16_t                 size,
+                                          bool                     localOnly = false) {
+        return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
+    }
+
+    /**
+     * Enable the BLE stack's Security Manager. The Security Manager implements
+     * the cryptographic algorithms and protocol exchanges that allow two
+     * devices to securely exchange data and privately detect each other.
+     * Calling this API is a prerequisite for encryption and pairing (bonding).
+     *
+     * @param[in]  enableBonding Allow for bonding.
+     * @param[in]  requireMITM   Require protection against man-in-the-middle attacks.
+     * @param[in]  iocaps        To specify the I/O capabilities of this peripheral,
+     *                           such as availability of a display or keyboard, to
+     *                           support out-of-band exchanges of security data.
+     * @param[in]  passkey       To specify a static passkey.
+     *
+     * @return BLE_ERROR_NONE on success.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from SecurityManager directly. A former
+     * call to ble.initializeSecurity(...) should be replaced with
+     * ble.securityManager().init(...).
+     */
+    ble_error_t initializeSecurity(bool                                      enableBonding = true,
+                                   bool                                      requireMITM   = true,
+                                   SecurityManager::SecurityIOCapabilities_t iocaps        = SecurityManager::IO_CAPS_NONE,
+                                   const SecurityManager::Passkey_t          passkey       = NULL) {
+        return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
+    }
+
+    /**
+     * Get the security status of a connection.
+     *
+     * @param[in]  connectionHandle   Handle to identify the connection.
+     * @param[out] securityStatusP    Security status.
+     *
+     * @return BLE_SUCCESS or appropriate error code indicating the reason of failure.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from SecurityManager directly. A former
+     * call to ble.getLinkSecurity(...) should be replaced with
+     * ble.securityManager().getLinkSecurity(...).
+     */
+    ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
+        return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
+    }
+
+    /**
+     * Delete all peer device context and all related bonding information from
+     * the database within the security manager.
+     *
+     * @retval BLE_ERROR_NONE             On success; else returns an error code indicating the reason for the failure.
+     * @retval BLE_ERROR_INVALID_STATE    If the API is called without module initialization or
+     *                                    application registration.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from SecurityManager directly. A former
+     * call to ble.purgeAllBondingState() should be replaced with
+     * ble.securityManager().purgeAllBondingState().
+     */
+    ble_error_t purgeAllBondingState(void) {
+        return securityManager().purgeAllBondingState();
+    }
+
+    /**
+     * Set up a callback for timeout events. Refer to Gap::TimeoutSource_t for
+     * possible event types.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call
+     * to ble.onTimeout(callback) should be replaced with
+     * ble.gap().onTimeout(callback).
+     */
+    void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
+        gap().onTimeout(timeoutCallback);
+    }
+
+    /**
+     * Set up a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call
+     * to ble.onConnection(callback) should be replaced with
+     * ble.gap().onConnection(callback).
+     */
+    void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
+        gap().onConnection(connectionCallback);
+    }
+
+    /**
+     * Append to a chain of callbacks to be invoked upon GAP disconnection.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call
+     * to ble.onDisconnection(callback) should be replaced with
+     * ble.gap().onDisconnection(callback).
+     */
+    void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
+        gap().onDisconnection(disconnectionCallback);
+    }
+
+    template<typename T>
+    void onDisconnection(T *tptr, void (T::*mptr)(const Gap::DisconnectionCallbackParams_t*)) {
+        gap().onDisconnection(tptr, mptr);
+    }
+
+    /**
+     * Radio Notification is a feature that enables ACTIVE and INACTIVE
+     * (nACTIVE) signals from the stack. These notify the application when the
+     * radio is in use. The signal is sent using software interrupt.
+     *
+     * The ACTIVE signal is sent before the radio event starts. The nACTIVE
+     * signal is sent at the end of the radio event. These signals can be used
+     * by the application programmer to synchronize application logic with radio
+     * activity. For example, the ACTIVE signal can be used to shut off external
+     * devices to manage peak current drawn during periods when the radio is on,
+     * or to trigger sensor data collection for transmission in the radio event.
+     *
+     * @param callback
+     *          The application handler to be invoked in response to a radio
+     *          ACTIVE/INACTIVE event.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from Gap directly. A former call
+     * to ble.onRadioNotification(...) should be replaced with
+     * ble.gap().onRadioNotification(...).
+     */
+    void onRadioNotification(void (*callback)(bool)) {
+        gap().onRadioNotification(callback);
+    }
+
+    /**
+     * Add a callback for the GATT event DATA_SENT (which is triggered when
+     * updates are sent out by GATT in the form of notifications).
+     *
+     * @Note: It is possible to chain together multiple onDataSent callbacks
+     * (potentially from different modules of an application) to receive updates
+     * to characteristics.
+     *
+     * @Note: It is also possible to set up a callback into a member function of
+     * some object.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from GattServer directly. A former call
+     * to ble.onDataSent(...) should be replaced with
+     * ble.gattServer().onDataSent(...).
+     */
+    void onDataSent(void (*callback)(unsigned count)) {
+        gattServer().onDataSent(callback);
+    }
+    template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
+        gattServer().onDataSent(objPtr, memberPtr);
+    }
+
+    /**
+     * Set up a callback for when an attribute has its value updated by or at the
+     * connected peer. For a peripheral, this callback is triggered when the local
+     * GATT server has an attribute updated by a write command from the peer.
+     * For a Central, this callback is triggered when a response is received for
+     * a write request.
+     *
+     * @Note: It is possible to chain together multiple onDataWritten callbacks
+     * (potentially from different modules of an application) to receive updates
+     * to characteristics. Many services, such as DFU and UART, add their own
+     * onDataWritten callbacks behind the scenes to trap interesting events.
+     *
+     * @Note: It is also possible to set up a callback into a member function of
+     * some object.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from GattServer directly. A former call
+     * to ble.onDataWritten(...) should be replaced with
+     * ble.gattServer().onDataWritten(...).
+     */
+    void onDataWritten(void (*callback)(const GattWriteCallbackParams *eventDataP)) {
+        gattServer().onDataWritten(callback);
+    }
+    template <typename T> void onDataWritten(T * objPtr, void (T::*memberPtr)(const GattWriteCallbackParams *context)) {
+        gattServer().onDataWritten(objPtr, memberPtr);
+    }
+
+    /**
+     * Set up a callback to be invoked on the peripheral when an attribute is
+     * being read by a remote client.
+     *
+     * @Note: This functionality may not be available on all underlying stacks.
+     * You could use GattCharacteristic::setReadAuthorizationCallback() as an
+     * alternative.
+     *
+     * @Note: It is possible to chain together multiple onDataRead callbacks
+     * (potentially from different modules of an application) to receive updates
+     * to characteristics. Services may add their own onDataRead callbacks
+     * behind the scenes to trap interesting events.
+     *
+     * @Note: It is also possible to set up a callback into a member function of
+     * some object.
+     *
+     * @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
+     *         else BLE_ERROR_NONE.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from GattServer directly. A former call
+     * to ble.onDataRead(...) should be replaced with
+     * ble.gattServer().onDataRead(...).
+     */
+    ble_error_t onDataRead(void (*callback)(const GattReadCallbackParams *eventDataP)) {
+        return gattServer().onDataRead(callback);
+    }
+    template <typename T> ble_error_t onDataRead(T * objPtr, void (T::*memberPtr)(const GattReadCallbackParams *context)) {
+        return gattServer().onDataRead(objPtr, memberPtr);
+    }
+
+    /**
+     * Set up a callback for when notifications or indications are enabled for a
+     * characteristic on the local GattServer.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from GattServer directly. A former call
+     * to ble.onUpdatesEnabled(callback) should be replaced with
+     * ble.gattServer().onUpdatesEnabled(callback).
+     */
+    void onUpdatesEnabled(GattServer::EventCallback_t callback) {
+        gattServer().onUpdatesEnabled(callback);
+    }
+
+    /**
+     * Set up a callback for when notifications or indications are disabled for a
+     * characteristic on the local GattServer.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from GattServer directly. A former call
+     * to ble.onUpdatesEnabled(callback) should be replaced with
+     * ble.gattServer().onUpdatesEnabled(callback).
+     */
+    void onUpdatesDisabled(GattServer::EventCallback_t callback) {
+        gattServer().onUpdatesDisabled(callback);
+    }
+
+    /**
+     * Set up a callback for when the GATT server receives a response for an
+     * indication event sent previously.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from GattServer directly. A former call
+     * to ble.onConfirmationReceived(callback) should be replaced with
+     * ble.gattServer().onConfirmationReceived(callback).
+     */
+    void onConfirmationReceived(GattServer::EventCallback_t callback) {
+        gattServer().onConfirmationReceived(callback);
+    }
+
+    /**
+     * Set up a callback for when the security setup procedure (key generation
+     * and exchange) for a link has started. This will be skipped for bonded
+     * devices. The callback is passed in parameters received from the peer's
+     * security request: bool allowBonding, bool requireMITM, and
+     * SecurityIOCapabilities_t.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from SecurityManager directly. A former
+     * call to ble.onSecuritySetupInitiated(callback) should be replaced with
+     * ble.securityManager().onSecuritySetupInitiated(callback).
+     */
+    void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
+        securityManager().onSecuritySetupInitiated(callback);
+    }
+
+    /**
+     * Set up a callback for when the security setup procedure (key generation
+     * and exchange) for a link has completed. This will be skipped for bonded
+     * devices. The callback is passed in the success/failure status of the
+     * security setup procedure.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from SecurityManager directly. A former
+     * call to ble.onSecuritySetupCompleted(callback) should be replaced with
+     * ble.securityManager().onSecuritySetupCompleted(callback).
+     */
+    void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
+        securityManager().onSecuritySetupCompleted(callback);
+    }
+
+    /**
+     * Set up a callback for when a link with the peer is secured. For bonded
+     * devices, subsequent reconnections with a bonded peer will result only in
+     * this callback when the link is secured, and setup procedures will not
+     * occur unless the bonding information is either lost or deleted on either
+     * or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
+     * to the level of security in effect for the secured link.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from SecurityManager directly. A former
+     * call to ble.onLinkSecured(callback) should be replaced with
+     * ble.securityManager().onLinkSecured(callback).
+     */
+    void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
+        securityManager().onLinkSecured(callback);
+    }
+
+    /**
+     * Set up a callback for successful bonding, meaning that link-specific security
+     * context is stored persistently for a peer device.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from SecurityManager directly. A former
+     * call to ble.onSecurityContextStored(callback) should be replaced with
+     * ble.securityManager().onSecurityContextStored(callback).
+     */
+    void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
+        securityManager().onSecurityContextStored(callback);
+    }
+
+    /**
+     * Set up a callback for when the passkey needs to be displayed on a
+     * peripheral with DISPLAY capability. This happens when security is
+     * configured to prevent Man-In-The-Middle attacks, and the peers need to exchange 
+     * a passkey (or PIN) to authenticate the connection
+     * attempt.
+     *
+     * @note: This API is now *deprecated* and will be dropped in the future.
+     * You should use the parallel API from SecurityManager directly. A former
+     * call to ble.onPasskeyDisplay(callback) should be replaced with
+     * ble.securityManager().onPasskeyDisplay(callback).
+     */
+    void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
+        return securityManager().onPasskeyDisplay(callback);
+    }
+
+private:
+    /**
+     * Implementation of init() [internal to BLE_API].
+     *
+     * The implementation is separated into a private method because it isn't
+     * suitable to be included in the header.
+     */
+    ble_error_t initImplementation(FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback);
+
+private:
+    BLE(const BLE&);
+    BLE &operator=(const BLE &);
+
+private:
+    InstanceID_t     instanceID;
+    BLEInstanceBase *transport; /* The device-specific backend */
+};
+
+typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
+                        * code. Will be dropped at some point soon.*/
+
 #endif // ifndef __BLE_H__
\ No newline at end of file