High level Bluetooth Low Energy API and radio abstraction layer

Fork of BLE_API by Bluetooth Low Energy

Committer:
rgrover1
Date:
Thu Nov 26 12:52:04 2015 +0000
Revision:
920:d18cff0c4b09
Parent:
919:c5b9fac295f5
Child:
921:ea542e6519bb
Synchronized with git rev 0d1bfd48
Author: Rohit Grover
Merge pull request #107 from andresag01/develop

Remove Eddystone implementation in ble/services

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 710:b2e1a2660ec2 1 /* mbed Microcontroller Library
rgrover1 710:b2e1a2660ec2 2 * Copyright (c) 2006-2013 ARM Limited
rgrover1 710:b2e1a2660ec2 3 *
rgrover1 710:b2e1a2660ec2 4 * Licensed under the Apache License, Version 2.0 (the "License");
rgrover1 710:b2e1a2660ec2 5 * you may not use this file except in compliance with the License.
rgrover1 710:b2e1a2660ec2 6 * You may obtain a copy of the License at
rgrover1 710:b2e1a2660ec2 7 *
rgrover1 710:b2e1a2660ec2 8 * http://www.apache.org/licenses/LICENSE-2.0
rgrover1 710:b2e1a2660ec2 9 *
rgrover1 710:b2e1a2660ec2 10 * Unless required by applicable law or agreed to in writing, software
rgrover1 710:b2e1a2660ec2 11 * distributed under the License is distributed on an "AS IS" BASIS,
rgrover1 710:b2e1a2660ec2 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1 710:b2e1a2660ec2 13 * See the License for the specific language governing permissions and
rgrover1 710:b2e1a2660ec2 14 * limitations under the License.
rgrover1 710:b2e1a2660ec2 15 */
rgrover1 710:b2e1a2660ec2 16
rgrover1 710:b2e1a2660ec2 17 #ifndef __GAP_H__
rgrover1 710:b2e1a2660ec2 18 #define __GAP_H__
rgrover1 710:b2e1a2660ec2 19
rgrover1 710:b2e1a2660ec2 20 #include "GapAdvertisingData.h"
rgrover1 710:b2e1a2660ec2 21 #include "GapAdvertisingParams.h"
rgrover1 710:b2e1a2660ec2 22 #include "GapScanningParams.h"
rgrover1 710:b2e1a2660ec2 23 #include "GapEvents.h"
rgrover1 829:9072de50087b 24 #include "CallChainOfFunctionPointersWithContext.h"
rgrover1 710:b2e1a2660ec2 25 #include "FunctionPointerWithContext.h"
rgrover1 710:b2e1a2660ec2 26
rgrover1 913:690bea02c431 27 /* Forward declarations for classes that will only be used for pointers or references in the following. */
rgrover1 710:b2e1a2660ec2 28 class GapAdvertisingParams;
rgrover1 710:b2e1a2660ec2 29 class GapScanningParams;
rgrover1 710:b2e1a2660ec2 30 class GapAdvertisingData;
rgrover1 710:b2e1a2660ec2 31
rgrover1 710:b2e1a2660ec2 32 class Gap {
rgrover1 710:b2e1a2660ec2 33 public:
rgrover1 710:b2e1a2660ec2 34 enum AddressType_t {
rgrover1 710:b2e1a2660ec2 35 ADDR_TYPE_PUBLIC = 0,
rgrover1 710:b2e1a2660ec2 36 ADDR_TYPE_RANDOM_STATIC,
rgrover1 710:b2e1a2660ec2 37 ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE,
rgrover1 710:b2e1a2660ec2 38 ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE
rgrover1 710:b2e1a2660ec2 39 };
rgrover1 913:690bea02c431 40 typedef enum AddressType_t addr_type_t; /* @Note: Deprecated. Use AddressType_t instead. */
rgrover1 710:b2e1a2660ec2 41
rgrover1 710:b2e1a2660ec2 42 static const unsigned ADDR_LEN = 6;
rgrover1 710:b2e1a2660ec2 43 typedef uint8_t Address_t[ADDR_LEN]; /* 48-bit address, LSB format. */
rgrover1 913:690bea02c431 44 typedef Address_t address_t; /* @Note: Deprecated. Use Address_t instead. */
rgrover1 710:b2e1a2660ec2 45
rgrover1 710:b2e1a2660ec2 46 enum TimeoutSource_t {
rgrover1 710:b2e1a2660ec2 47 TIMEOUT_SRC_ADVERTISING = 0x00, /**< Advertising timeout. */
rgrover1 710:b2e1a2660ec2 48 TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /**< Security request timeout. */
rgrover1 710:b2e1a2660ec2 49 TIMEOUT_SRC_SCAN = 0x02, /**< Scanning timeout. */
rgrover1 710:b2e1a2660ec2 50 TIMEOUT_SRC_CONN = 0x03, /**< Connection timeout. */
rgrover1 710:b2e1a2660ec2 51 };
rgrover1 710:b2e1a2660ec2 52
rgrover1 710:b2e1a2660ec2 53 /**
rgrover1 710:b2e1a2660ec2 54 * Enumeration for disconnection reasons. The values for these reasons are
rgrover1 913:690bea02c431 55 * derived from Nordic's implementation, but the reasons are meant to be
rgrover1 913:690bea02c431 56 * independent of the transport. If you are returned a reason that is not
rgrover1 913:690bea02c431 57 * covered by this enumeration, please refer to the underlying
rgrover1 710:b2e1a2660ec2 58 * transport library.
rgrover1 710:b2e1a2660ec2 59 */
rgrover1 710:b2e1a2660ec2 60 enum DisconnectionReason_t {
rgrover1 710:b2e1a2660ec2 61 CONNECTION_TIMEOUT = 0x08,
rgrover1 710:b2e1a2660ec2 62 REMOTE_USER_TERMINATED_CONNECTION = 0x13,
rgrover1 913:690bea02c431 63 REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14, /**< Remote device terminated connection due to low resources.*/
rgrover1 913:690bea02c431 64 REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15, /**< Remote device terminated connection due to power off. */
rgrover1 710:b2e1a2660ec2 65 LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
rgrover1 710:b2e1a2660ec2 66 CONN_INTERVAL_UNACCEPTABLE = 0x3B,
rgrover1 710:b2e1a2660ec2 67 };
rgrover1 710:b2e1a2660ec2 68
rgrover1 913:690bea02c431 69 /* Describes the current state of the device (more than one bit can be set). */
rgrover1 710:b2e1a2660ec2 70 struct GapState_t {
rgrover1 913:690bea02c431 71 unsigned advertising : 1; /**< Peripheral is currently advertising. */
rgrover1 913:690bea02c431 72 unsigned connected : 1; /**< Peripheral is connected to a central. */
rgrover1 710:b2e1a2660ec2 73 };
rgrover1 710:b2e1a2660ec2 74
rgrover1 710:b2e1a2660ec2 75 typedef uint16_t Handle_t; /* Type for connection handle. */
rgrover1 710:b2e1a2660ec2 76
rgrover1 710:b2e1a2660ec2 77 typedef struct {
rgrover1 710:b2e1a2660ec2 78 uint16_t minConnectionInterval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 79 uint16_t maxConnectionInterval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 80 uint16_t slaveLatency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 81 uint16_t connectionSupervisionTimeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 82 } ConnectionParams_t;
rgrover1 710:b2e1a2660ec2 83
rgrover1 710:b2e1a2660ec2 84 enum Role_t {
rgrover1 710:b2e1a2660ec2 85 PERIPHERAL = 0x1, /**< Peripheral Role. */
rgrover1 710:b2e1a2660ec2 86 CENTRAL = 0x2, /**< Central Role. */
rgrover1 710:b2e1a2660ec2 87 };
rgrover1 710:b2e1a2660ec2 88
rgrover1 710:b2e1a2660ec2 89 struct AdvertisementCallbackParams_t {
rgrover1 710:b2e1a2660ec2 90 Address_t peerAddr;
rgrover1 710:b2e1a2660ec2 91 int8_t rssi;
rgrover1 710:b2e1a2660ec2 92 bool isScanResponse;
rgrover1 710:b2e1a2660ec2 93 GapAdvertisingParams::AdvertisingType_t type;
rgrover1 710:b2e1a2660ec2 94 uint8_t advertisingDataLen;
rgrover1 710:b2e1a2660ec2 95 const uint8_t *advertisingData;
rgrover1 710:b2e1a2660ec2 96 };
rgrover1 710:b2e1a2660ec2 97 typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
rgrover1 710:b2e1a2660ec2 98
rgrover1 710:b2e1a2660ec2 99 struct ConnectionCallbackParams_t {
rgrover1 710:b2e1a2660ec2 100 Handle_t handle;
rgrover1 710:b2e1a2660ec2 101 Role_t role;
rgrover1 710:b2e1a2660ec2 102 AddressType_t peerAddrType;
rgrover1 710:b2e1a2660ec2 103 Address_t peerAddr;
rgrover1 710:b2e1a2660ec2 104 AddressType_t ownAddrType;
rgrover1 710:b2e1a2660ec2 105 Address_t ownAddr;
rgrover1 710:b2e1a2660ec2 106 const ConnectionParams_t *connectionParams;
rgrover1 710:b2e1a2660ec2 107
rgrover1 710:b2e1a2660ec2 108 ConnectionCallbackParams_t(Handle_t handleIn,
rgrover1 710:b2e1a2660ec2 109 Role_t roleIn,
rgrover1 710:b2e1a2660ec2 110 AddressType_t peerAddrTypeIn,
rgrover1 710:b2e1a2660ec2 111 const uint8_t *peerAddrIn,
rgrover1 710:b2e1a2660ec2 112 AddressType_t ownAddrTypeIn,
rgrover1 710:b2e1a2660ec2 113 const uint8_t *ownAddrIn,
rgrover1 710:b2e1a2660ec2 114 const ConnectionParams_t *connectionParamsIn) :
rgrover1 710:b2e1a2660ec2 115 handle(handleIn),
rgrover1 710:b2e1a2660ec2 116 role(roleIn),
rgrover1 710:b2e1a2660ec2 117 peerAddrType(peerAddrTypeIn),
rgrover1 710:b2e1a2660ec2 118 peerAddr(),
rgrover1 710:b2e1a2660ec2 119 ownAddrType(ownAddrTypeIn),
rgrover1 710:b2e1a2660ec2 120 ownAddr(),
rgrover1 710:b2e1a2660ec2 121 connectionParams(connectionParamsIn) {
rgrover1 710:b2e1a2660ec2 122 memcpy(peerAddr, peerAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 123 memcpy(ownAddr, ownAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 124 }
rgrover1 710:b2e1a2660ec2 125 };
rgrover1 710:b2e1a2660ec2 126
rgrover1 829:9072de50087b 127 struct DisconnectionCallbackParams_t {
rgrover1 829:9072de50087b 128 Handle_t handle;
rgrover1 829:9072de50087b 129 DisconnectionReason_t reason;
rgrover1 829:9072de50087b 130
rgrover1 829:9072de50087b 131 DisconnectionCallbackParams_t(Handle_t handleIn,
rgrover1 829:9072de50087b 132 DisconnectionReason_t reasonIn) :
rgrover1 829:9072de50087b 133 handle(handleIn),
rgrover1 829:9072de50087b 134 reason(reasonIn)
rgrover1 829:9072de50087b 135 {}
rgrover1 829:9072de50087b 136 };
rgrover1 829:9072de50087b 137
rgrover1 710:b2e1a2660ec2 138 static const uint16_t UNIT_1_25_MS = 1250; /**< Number of microseconds in 1.25 milliseconds. */
rgrover1 710:b2e1a2660ec2 139 static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
rgrover1 710:b2e1a2660ec2 140 return (durationInMillis * 1000) / UNIT_1_25_MS;
rgrover1 710:b2e1a2660ec2 141 }
rgrover1 766:03f1a26f132f 142
rgrover1 710:b2e1a2660ec2 143
rgrover1 920:d18cff0c4b09 144 typedef void (*TimeoutEventCallback_t)(TimeoutSource_t source);
rgrover1 710:b2e1a2660ec2 145 typedef void (*ConnectionEventCallback_t)(const ConnectionCallbackParams_t *params);
rgrover1 829:9072de50087b 146 typedef void (*DisconnectionEventCallback_t)(const DisconnectionCallbackParams_t *params);
rgrover1 753:0f60274cd3ad 147 typedef FunctionPointerWithContext<bool> RadioNotificationEventCallback_t;
rgrover1 710:b2e1a2660ec2 148
rgrover1 710:b2e1a2660ec2 149 /*
rgrover1 710:b2e1a2660ec2 150 * The following functions are meant to be overridden in the platform-specific sub-class.
rgrover1 710:b2e1a2660ec2 151 */
rgrover1 710:b2e1a2660ec2 152 public:
rgrover1 710:b2e1a2660ec2 153 /**
rgrover1 710:b2e1a2660ec2 154 * Set the BTLE MAC address and type. Please note that the address format is
rgrover1 913:690bea02c431 155 * least significant byte first (LSB). Please refer to Address_t.
rgrover1 710:b2e1a2660ec2 156 *
rgrover1 710:b2e1a2660ec2 157 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 158 */
rgrover1 710:b2e1a2660ec2 159 virtual ble_error_t setAddress(AddressType_t type, const Address_t address) {
rgrover1 734:4872b70437ce 160 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 161 (void)type;
rgrover1 734:4872b70437ce 162 (void)address;
rgrover1 734:4872b70437ce 163
rgrover1 728:997ba5e7b3b6 164 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 165 }
rgrover1 710:b2e1a2660ec2 166
rgrover1 710:b2e1a2660ec2 167 /**
rgrover1 710:b2e1a2660ec2 168 * Fetch the BTLE MAC address and type.
rgrover1 710:b2e1a2660ec2 169 *
rgrover1 710:b2e1a2660ec2 170 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 171 */
rgrover1 710:b2e1a2660ec2 172 virtual ble_error_t getAddress(AddressType_t *typeP, Address_t address) {
rgrover1 913:690bea02c431 173 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 174 (void)typeP;
rgrover1 734:4872b70437ce 175 (void)address;
rgrover1 734:4872b70437ce 176
rgrover1 728:997ba5e7b3b6 177 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 178 }
rgrover1 710:b2e1a2660ec2 179
rgrover1 710:b2e1a2660ec2 180 /**
rgrover1 710:b2e1a2660ec2 181 * @return Minimum Advertising interval in milliseconds.
rgrover1 710:b2e1a2660ec2 182 */
rgrover1 710:b2e1a2660ec2 183 virtual uint16_t getMinAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 184 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 185 }
rgrover1 710:b2e1a2660ec2 186
rgrover1 710:b2e1a2660ec2 187 /**
rgrover1 710:b2e1a2660ec2 188 * @return Minimum Advertising interval in milliseconds for non-connectible mode.
rgrover1 710:b2e1a2660ec2 189 */
rgrover1 710:b2e1a2660ec2 190 virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 191 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 192 }
rgrover1 710:b2e1a2660ec2 193
rgrover1 710:b2e1a2660ec2 194 /**
rgrover1 710:b2e1a2660ec2 195 * @return Maximum Advertising interval in milliseconds.
rgrover1 710:b2e1a2660ec2 196 */
rgrover1 710:b2e1a2660ec2 197 virtual uint16_t getMaxAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 198 return 0xFFFF; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 199 }
rgrover1 710:b2e1a2660ec2 200
rgrover1 710:b2e1a2660ec2 201 virtual ble_error_t stopAdvertising(void) {
rgrover1 728:997ba5e7b3b6 202 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 203 }
rgrover1 710:b2e1a2660ec2 204
rgrover1 710:b2e1a2660ec2 205 /**
rgrover1 710:b2e1a2660ec2 206 * Stop scanning. The current scanning parameters remain in effect.
rgrover1 710:b2e1a2660ec2 207 *
rgrover1 710:b2e1a2660ec2 208 * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1 710:b2e1a2660ec2 209 */
rgrover1 710:b2e1a2660ec2 210 virtual ble_error_t stopScan() {
rgrover1 728:997ba5e7b3b6 211 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 212 }
rgrover1 710:b2e1a2660ec2 213
rgrover1 710:b2e1a2660ec2 214 /**
rgrover1 710:b2e1a2660ec2 215 * Create a connection (GAP Link Establishment).
rgrover1 710:b2e1a2660ec2 216 *
rgrover1 710:b2e1a2660ec2 217 * @param peerAddr
rgrover1 710:b2e1a2660ec2 218 * 48-bit address, LSB format.
rgrover1 710:b2e1a2660ec2 219 * @param peerAddrType
rgrover1 710:b2e1a2660ec2 220 * Address type of the peer.
rgrover1 710:b2e1a2660ec2 221 * @param connectionParams
rgrover1 710:b2e1a2660ec2 222 * Connection parameters.
rgrover1 710:b2e1a2660ec2 223 * @param scanParams
rgrover1 710:b2e1a2660ec2 224 * Paramters to be used while scanning for the peer.
rgrover1 710:b2e1a2660ec2 225 * @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1 829:9072de50087b 226 * successfully. The connectionCallChain (if set) will be invoked upon
rgrover1 710:b2e1a2660ec2 227 * a connection event.
rgrover1 710:b2e1a2660ec2 228 */
rgrover1 710:b2e1a2660ec2 229 virtual ble_error_t connect(const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 230 Gap::AddressType_t peerAddrType,
rgrover1 710:b2e1a2660ec2 231 const ConnectionParams_t *connectionParams,
rgrover1 710:b2e1a2660ec2 232 const GapScanningParams *scanParams) {
rgrover1 913:690bea02c431 233 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 234 (void)peerAddr;
rgrover1 734:4872b70437ce 235 (void)peerAddrType;
rgrover1 734:4872b70437ce 236 (void)connectionParams;
rgrover1 734:4872b70437ce 237 (void)scanParams;
rgrover1 734:4872b70437ce 238
rgrover1 728:997ba5e7b3b6 239 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 240 }
rgrover1 710:b2e1a2660ec2 241
rgrover1 710:b2e1a2660ec2 242 /**
rgrover1 710:b2e1a2660ec2 243 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 244 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 245 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 246 *
rgrover1 710:b2e1a2660ec2 247 * @param reason
rgrover1 913:690bea02c431 248 * The reason for disconnection; to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 249 */
rgrover1 710:b2e1a2660ec2 250 virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
rgrover1 734:4872b70437ce 251 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 252 (void)connectionHandle;
rgrover1 734:4872b70437ce 253 (void)reason;
rgrover1 734:4872b70437ce 254
rgrover1 728:997ba5e7b3b6 255 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 256 }
rgrover1 710:b2e1a2660ec2 257
rgrover1 710:b2e1a2660ec2 258 /**
rgrover1 710:b2e1a2660ec2 259 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 260 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 261 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 262 *
rgrover1 710:b2e1a2660ec2 263 * @param reason
rgrover1 913:690bea02c431 264 * The reason for disconnection; to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 265 *
rgrover1 913:690bea02c431 266 * @note: This version of disconnect() doesn't take a connection handle. It
rgrover1 913:690bea02c431 267 * works reliably only for stacks that are limited to a single
rgrover1 710:b2e1a2660ec2 268 * connection. This API should be considered *deprecated* in favour of the
rgrover1 913:690bea02c431 269 * alternative, which takes a connection handle. It will be dropped in the future.
rgrover1 710:b2e1a2660ec2 270 */
rgrover1 710:b2e1a2660ec2 271 virtual ble_error_t disconnect(DisconnectionReason_t reason) {
rgrover1 913:690bea02c431 272 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 273 (void)reason;
rgrover1 734:4872b70437ce 274
rgrover1 728:997ba5e7b3b6 275 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 276 }
rgrover1 710:b2e1a2660ec2 277
rgrover1 710:b2e1a2660ec2 278 /**
rgrover1 710:b2e1a2660ec2 279 * Get the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 280 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 281 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 282 *
rgrover1 710:b2e1a2660ec2 283 * @param[out] params
rgrover1 710:b2e1a2660ec2 284 * The structure where the parameters will be stored. Memory
rgrover1 710:b2e1a2660ec2 285 * for this is owned by the caller.
rgrover1 710:b2e1a2660ec2 286 *
rgrover1 710:b2e1a2660ec2 287 * @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1 710:b2e1a2660ec2 288 * the given structure pointed to by params.
rgrover1 710:b2e1a2660ec2 289 */
rgrover1 710:b2e1a2660ec2 290 virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
rgrover1 913:690bea02c431 291 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 292 (void)params;
rgrover1 734:4872b70437ce 293
rgrover1 728:997ba5e7b3b6 294 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 295 }
rgrover1 710:b2e1a2660ec2 296
rgrover1 710:b2e1a2660ec2 297 /**
rgrover1 710:b2e1a2660ec2 298 * Set the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 299 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 300 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 301 *
rgrover1 710:b2e1a2660ec2 302 * @param[in] params
rgrover1 710:b2e1a2660ec2 303 * The structure containing the desired parameters.
rgrover1 710:b2e1a2660ec2 304 */
rgrover1 710:b2e1a2660ec2 305 virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
rgrover1 913:690bea02c431 306 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 307 (void)params;
rgrover1 734:4872b70437ce 308
rgrover1 728:997ba5e7b3b6 309 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 310 }
rgrover1 710:b2e1a2660ec2 311
rgrover1 710:b2e1a2660ec2 312 /**
rgrover1 816:2b4f0ef8c06e 313 * Update connection parameters.
rgrover1 913:690bea02c431 314 * In the central role this will initiate a Link Layer connection parameter update procedure.
rgrover1 913:690bea02c431 315 * In the peripheral role, this will send the corresponding L2CAP request and wait for
rgrover1 816:2b4f0ef8c06e 316 * the central to perform the procedure.
rgrover1 816:2b4f0ef8c06e 317 *
rgrover1 710:b2e1a2660ec2 318 * @param[in] handle
rgrover1 913:690bea02c431 319 * Connection Handle.
rgrover1 710:b2e1a2660ec2 320 * @param[in] params
rgrover1 710:b2e1a2660ec2 321 * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1 710:b2e1a2660ec2 322 * the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1 710:b2e1a2660ec2 323 */
rgrover1 710:b2e1a2660ec2 324 virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
rgrover1 734:4872b70437ce 325 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 326 (void)handle;
rgrover1 734:4872b70437ce 327 (void)params;
rgrover1 734:4872b70437ce 328
rgrover1 728:997ba5e7b3b6 329 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 330 }
rgrover1 710:b2e1a2660ec2 331
rgrover1 710:b2e1a2660ec2 332 /**
rgrover1 710:b2e1a2660ec2 333 * Set the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 334 * @param[in] deviceName
rgrover1 710:b2e1a2660ec2 335 * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1 710:b2e1a2660ec2 336 */
rgrover1 710:b2e1a2660ec2 337 virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
rgrover1 913:690bea02c431 338 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 339 (void)deviceName;
rgrover1 734:4872b70437ce 340
rgrover1 728:997ba5e7b3b6 341 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 342 }
rgrover1 710:b2e1a2660ec2 343
rgrover1 710:b2e1a2660ec2 344 /**
rgrover1 710:b2e1a2660ec2 345 * Get the value of the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 346 * @param[out] deviceName
rgrover1 710:b2e1a2660ec2 347 * Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1 710:b2e1a2660ec2 348 * terminated* string will be placed. Set this
rgrover1 710:b2e1a2660ec2 349 * value to NULL in order to obtain the deviceName-length
rgrover1 710:b2e1a2660ec2 350 * from the 'length' parameter.
rgrover1 710:b2e1a2660ec2 351 *
rgrover1 710:b2e1a2660ec2 352 * @param[in/out] lengthP
rgrover1 710:b2e1a2660ec2 353 * (on input) Length of the buffer pointed to by deviceName;
rgrover1 710:b2e1a2660ec2 354 * (on output) the complete device name length (without the
rgrover1 710:b2e1a2660ec2 355 * null terminator).
rgrover1 710:b2e1a2660ec2 356 *
rgrover1 710:b2e1a2660ec2 357 * @note If the device name is longer than the size of the supplied buffer,
rgrover1 710:b2e1a2660ec2 358 * length will return the complete device name length, and not the
rgrover1 710:b2e1a2660ec2 359 * number of bytes actually returned in deviceName. The application may
rgrover1 710:b2e1a2660ec2 360 * use this information to retry with a suitable buffer size.
rgrover1 710:b2e1a2660ec2 361 */
rgrover1 710:b2e1a2660ec2 362 virtual ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
rgrover1 734:4872b70437ce 363 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 364 (void)deviceName;
rgrover1 734:4872b70437ce 365 (void)lengthP;
rgrover1 734:4872b70437ce 366
rgrover1 728:997ba5e7b3b6 367 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 368 }
rgrover1 710:b2e1a2660ec2 369
rgrover1 710:b2e1a2660ec2 370 /**
rgrover1 710:b2e1a2660ec2 371 * Set the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 372 * @param[in] appearance
rgrover1 710:b2e1a2660ec2 373 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 374 */
rgrover1 710:b2e1a2660ec2 375 virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
rgrover1 913:690bea02c431 376 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 377 (void)appearance;
rgrover1 734:4872b70437ce 378
rgrover1 728:997ba5e7b3b6 379 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 380 }
rgrover1 710:b2e1a2660ec2 381
rgrover1 710:b2e1a2660ec2 382 /**
rgrover1 710:b2e1a2660ec2 383 * Get the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 384 * @param[out] appearance
rgrover1 710:b2e1a2660ec2 385 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 386 */
rgrover1 710:b2e1a2660ec2 387 virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
rgrover1 913:690bea02c431 388 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 389 (void)appearanceP;
rgrover1 734:4872b70437ce 390
rgrover1 728:997ba5e7b3b6 391 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 392 }
rgrover1 710:b2e1a2660ec2 393
rgrover1 710:b2e1a2660ec2 394 /**
rgrover1 710:b2e1a2660ec2 395 * Set the radio's transmit power.
rgrover1 710:b2e1a2660ec2 396 * @param[in] txPower Radio transmit power in dBm.
rgrover1 710:b2e1a2660ec2 397 */
rgrover1 710:b2e1a2660ec2 398 virtual ble_error_t setTxPower(int8_t txPower) {
rgrover1 913:690bea02c431 399 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 400 (void)txPower;
rgrover1 734:4872b70437ce 401
rgrover1 728:997ba5e7b3b6 402 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 403 }
rgrover1 710:b2e1a2660ec2 404
rgrover1 710:b2e1a2660ec2 405 /**
rgrover1 710:b2e1a2660ec2 406 * Query the underlying stack for permitted arguments for setTxPower().
rgrover1 710:b2e1a2660ec2 407 *
rgrover1 710:b2e1a2660ec2 408 * @param[out] valueArrayPP
rgrover1 710:b2e1a2660ec2 409 * Out parameter to receive the immutable array of Tx values.
rgrover1 710:b2e1a2660ec2 410 * @param[out] countP
rgrover1 710:b2e1a2660ec2 411 * Out parameter to receive the array's size.
rgrover1 710:b2e1a2660ec2 412 */
rgrover1 710:b2e1a2660ec2 413 virtual void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
rgrover1 913:690bea02c431 414 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 415 (void)valueArrayPP;
rgrover1 734:4872b70437ce 416 (void)countP;
rgrover1 734:4872b70437ce 417
rgrover1 742:861ed7eb186d 418 *countP = 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 419 }
rgrover1 710:b2e1a2660ec2 420
rgrover1 710:b2e1a2660ec2 421 protected:
rgrover1 710:b2e1a2660ec2 422 /* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
rgrover1 710:b2e1a2660ec2 423 virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
rgrover1 772:b6d27ab66c94 424 (void)scanningParams;
rgrover1 728:997ba5e7b3b6 425 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 426 }
rgrover1 710:b2e1a2660ec2 427
rgrover1 710:b2e1a2660ec2 428 /*
rgrover1 710:b2e1a2660ec2 429 * APIs with non-virtual implementations.
rgrover1 710:b2e1a2660ec2 430 */
rgrover1 710:b2e1a2660ec2 431 public:
rgrover1 710:b2e1a2660ec2 432 /**
rgrover1 913:690bea02c431 433 * Returns the current GAP state of the device using a bitmask that
rgrover1 913:690bea02c431 434 * describes whether the device is advertising or connected.
rgrover1 710:b2e1a2660ec2 435 */
rgrover1 710:b2e1a2660ec2 436 GapState_t getState(void) const {
rgrover1 710:b2e1a2660ec2 437 return state;
rgrover1 710:b2e1a2660ec2 438 }
rgrover1 710:b2e1a2660ec2 439
rgrover1 710:b2e1a2660ec2 440 /**
rgrover1 710:b2e1a2660ec2 441 * Set the GAP advertising mode to use for this device.
rgrover1 710:b2e1a2660ec2 442 */
rgrover1 710:b2e1a2660ec2 443 void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
rgrover1 710:b2e1a2660ec2 444 _advParams.setAdvertisingType(advType);
rgrover1 710:b2e1a2660ec2 445 }
rgrover1 710:b2e1a2660ec2 446
rgrover1 710:b2e1a2660ec2 447 /**
rgrover1 710:b2e1a2660ec2 448 * @param[in] interval
rgrover1 710:b2e1a2660ec2 449 * Advertising interval in units of milliseconds. Advertising
rgrover1 710:b2e1a2660ec2 450 * is disabled if interval is 0. If interval is smaller than
rgrover1 710:b2e1a2660ec2 451 * the minimum supported value, then the minimum supported
rgrover1 710:b2e1a2660ec2 452 * value is used instead. This minimum value can be discovered
rgrover1 710:b2e1a2660ec2 453 * using getMinAdvertisingInterval().
rgrover1 710:b2e1a2660ec2 454 *
rgrover1 710:b2e1a2660ec2 455 * This field must be set to 0 if connectionMode is equal
rgrover1 710:b2e1a2660ec2 456 * to ADV_CONNECTABLE_DIRECTED.
rgrover1 710:b2e1a2660ec2 457 *
rgrover1 710:b2e1a2660ec2 458 * @note: Decreasing this value will allow central devices to detect a
rgrover1 913:690bea02c431 459 * peripheral faster, at the expense of more power being used by the radio
rgrover1 710:b2e1a2660ec2 460 * due to the higher data transmit rate.
rgrover1 710:b2e1a2660ec2 461 *
rgrover1 710:b2e1a2660ec2 462 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 710:b2e1a2660ec2 463 * You should use the parallel API from Gap directly. A former call to
rgrover1 710:b2e1a2660ec2 464 * ble.setAdvertisingInterval(...) should now be achieved using
rgrover1 710:b2e1a2660ec2 465 * ble.gap().setAdvertisingInterval(...).
rgrover1 710:b2e1a2660ec2 466 *
rgrover1 710:b2e1a2660ec2 467 * @Note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1 710:b2e1a2660ec2 468 * 'interval' argument. That required an explicit conversion from
rgrover1 710:b2e1a2660ec2 469 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1 710:b2e1a2660ec2 470 * no longer required as the new units are milliseconds. Any application
rgrover1 913:690bea02c431 471 * code depending on the old semantics needs to be updated accordingly.
rgrover1 710:b2e1a2660ec2 472 */
rgrover1 710:b2e1a2660ec2 473 void setAdvertisingInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 474 if (interval == 0) {
rgrover1 710:b2e1a2660ec2 475 stopAdvertising();
rgrover1 710:b2e1a2660ec2 476 } else if (interval < getMinAdvertisingInterval()) {
rgrover1 710:b2e1a2660ec2 477 interval = getMinAdvertisingInterval();
rgrover1 710:b2e1a2660ec2 478 }
rgrover1 786:d6d7087d8377 479 _advParams.setInterval(interval);
rgrover1 710:b2e1a2660ec2 480 }
rgrover1 710:b2e1a2660ec2 481
rgrover1 710:b2e1a2660ec2 482 /**
rgrover1 710:b2e1a2660ec2 483 * @param[in] timeout
rgrover1 710:b2e1a2660ec2 484 * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1 710:b2e1a2660ec2 485 * and 16383). Use 0 to disable the advertising timeout.
rgrover1 710:b2e1a2660ec2 486 */
rgrover1 710:b2e1a2660ec2 487 void setAdvertisingTimeout(uint16_t timeout) {
rgrover1 710:b2e1a2660ec2 488 _advParams.setTimeout(timeout);
rgrover1 710:b2e1a2660ec2 489 }
rgrover1 710:b2e1a2660ec2 490
rgrover1 710:b2e1a2660ec2 491 /**
rgrover1 710:b2e1a2660ec2 492 * Start advertising.
rgrover1 710:b2e1a2660ec2 493 */
rgrover1 710:b2e1a2660ec2 494 ble_error_t startAdvertising(void) {
rgrover1 913:690bea02c431 495 setAdvertisingData(); /* Update the underlying stack. */
rgrover1 710:b2e1a2660ec2 496 return startAdvertising(_advParams);
rgrover1 710:b2e1a2660ec2 497 }
rgrover1 710:b2e1a2660ec2 498
rgrover1 710:b2e1a2660ec2 499 /**
rgrover1 710:b2e1a2660ec2 500 * Reset any advertising payload prepared from prior calls to
rgrover1 710:b2e1a2660ec2 501 * accumulateAdvertisingPayload(). This automatically propagates the re-
rgrover1 913:690bea02c431 502 * initialized advertising payload to the underlying stack.
rgrover1 710:b2e1a2660ec2 503 */
rgrover1 710:b2e1a2660ec2 504 void clearAdvertisingPayload(void) {
rgrover1 710:b2e1a2660ec2 505 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 506 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 507 }
rgrover1 710:b2e1a2660ec2 508
rgrover1 710:b2e1a2660ec2 509 /**
rgrover1 710:b2e1a2660ec2 510 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 511 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 913:690bea02c431 512 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 513 * small.
rgrover1 710:b2e1a2660ec2 514 *
rgrover1 710:b2e1a2660ec2 515 * @param[in] flags
rgrover1 710:b2e1a2660ec2 516 * The flags to be added. Please refer to
rgrover1 710:b2e1a2660ec2 517 * GapAdvertisingData::Flags for valid flags. Multiple
rgrover1 710:b2e1a2660ec2 518 * flags may be specified in combination.
rgrover1 710:b2e1a2660ec2 519 */
rgrover1 710:b2e1a2660ec2 520 ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1 710:b2e1a2660ec2 521 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 522 if ((rc = _advPayload.addFlags(flags)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 523 return rc;
rgrover1 710:b2e1a2660ec2 524 }
rgrover1 710:b2e1a2660ec2 525
rgrover1 710:b2e1a2660ec2 526 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 527 }
rgrover1 710:b2e1a2660ec2 528
rgrover1 710:b2e1a2660ec2 529 /**
rgrover1 710:b2e1a2660ec2 530 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 531 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 913:690bea02c431 532 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 533 * small.
rgrover1 710:b2e1a2660ec2 534 *
rgrover1 710:b2e1a2660ec2 535 * @param app
rgrover1 710:b2e1a2660ec2 536 * The appearance of the peripheral.
rgrover1 710:b2e1a2660ec2 537 */
rgrover1 710:b2e1a2660ec2 538 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1 710:b2e1a2660ec2 539 setAppearance(app);
rgrover1 710:b2e1a2660ec2 540
rgrover1 710:b2e1a2660ec2 541 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 542 if ((rc = _advPayload.addAppearance(app)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 543 return rc;
rgrover1 710:b2e1a2660ec2 544 }
rgrover1 710:b2e1a2660ec2 545
rgrover1 710:b2e1a2660ec2 546 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 547 }
rgrover1 710:b2e1a2660ec2 548
rgrover1 710:b2e1a2660ec2 549 /**
rgrover1 710:b2e1a2660ec2 550 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 551 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 913:690bea02c431 552 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 553 * small.
rgrover1 710:b2e1a2660ec2 554 *
rgrover1 912:f728aa46e7df 555 * @param power
rgrover1 764:1e560f0d45e1 556 * The max transmit power to be used by the controller (in dBm).
rgrover1 710:b2e1a2660ec2 557 */
rgrover1 710:b2e1a2660ec2 558 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1 710:b2e1a2660ec2 559 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 560 if ((rc = _advPayload.addTxPower(power)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 561 return rc;
rgrover1 710:b2e1a2660ec2 562 }
rgrover1 710:b2e1a2660ec2 563
rgrover1 710:b2e1a2660ec2 564 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 565 }
rgrover1 710:b2e1a2660ec2 566
rgrover1 710:b2e1a2660ec2 567 /**
rgrover1 710:b2e1a2660ec2 568 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 569 * advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1 710:b2e1a2660ec2 570 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
rgrover1 913:690bea02c431 571 * advertising payload is too small.
rgrover1 710:b2e1a2660ec2 572 *
rgrover1 913:690bea02c431 573 * @param type The type describing the variable length data.
rgrover1 913:690bea02c431 574 * @param data Data bytes.
rgrover1 913:690bea02c431 575 * @param len Length of data.
rgrover1 710:b2e1a2660ec2 576 */
rgrover1 710:b2e1a2660ec2 577 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 578 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 710:b2e1a2660ec2 579 setDeviceName(data);
rgrover1 710:b2e1a2660ec2 580 }
rgrover1 710:b2e1a2660ec2 581
rgrover1 710:b2e1a2660ec2 582 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 583 if ((rc = _advPayload.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 584 return rc;
rgrover1 710:b2e1a2660ec2 585 }
rgrover1 710:b2e1a2660ec2 586
rgrover1 710:b2e1a2660ec2 587 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 588 }
rgrover1 710:b2e1a2660ec2 589
rgrover1 710:b2e1a2660ec2 590 /**
rgrover1 765:4cd91998cd48 591 * Update a particular ADV field in the advertising payload (based on
rgrover1 765:4cd91998cd48 592 * matching type and length). Note: the length of the new data must be the
rgrover1 765:4cd91998cd48 593 * same as the old one.
rgrover1 763:36c3e2b1f1ae 594 *
rgrover1 913:690bea02c431 595 * @param[in] type The ADV type field describing the variable length data.
rgrover1 913:690bea02c431 596 * @param[in] data Data bytes.
rgrover1 913:690bea02c431 597 * @param[in] len Length of data.
rgrover1 765:4cd91998cd48 598 *
rgrover1 765:4cd91998cd48 599 * @note: If advertisements are enabled, then the update will take effect immediately.
rgrover1 765:4cd91998cd48 600 *
rgrover1 765:4cd91998cd48 601 * @return BLE_ERROR_NONE if the advertisement payload was updated based on
rgrover1 913:690bea02c431 602 * a <type, len> match; otherwise, an appropriate error.
rgrover1 763:36c3e2b1f1ae 603 */
rgrover1 763:36c3e2b1f1ae 604 ble_error_t updateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 763:36c3e2b1f1ae 605 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 763:36c3e2b1f1ae 606 setDeviceName(data);
rgrover1 763:36c3e2b1f1ae 607 }
rgrover1 763:36c3e2b1f1ae 608
rgrover1 763:36c3e2b1f1ae 609 ble_error_t rc;
rgrover1 763:36c3e2b1f1ae 610 if ((rc = _advPayload.updateData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 763:36c3e2b1f1ae 611 return rc;
rgrover1 763:36c3e2b1f1ae 612 }
rgrover1 763:36c3e2b1f1ae 613
rgrover1 763:36c3e2b1f1ae 614 return setAdvertisingData();
rgrover1 763:36c3e2b1f1ae 615 }
rgrover1 763:36c3e2b1f1ae 616
rgrover1 763:36c3e2b1f1ae 617 /**
rgrover1 913:690bea02c431 618 * Set up a particular, user-constructed advertisement payload for the
rgrover1 710:b2e1a2660ec2 619 * underlying stack. It would be uncommon for this API to be used directly;
rgrover1 710:b2e1a2660ec2 620 * there are other APIs to build an advertisement payload (see above).
rgrover1 710:b2e1a2660ec2 621 */
rgrover1 710:b2e1a2660ec2 622 ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
rgrover1 710:b2e1a2660ec2 623 _advPayload = payload;
rgrover1 710:b2e1a2660ec2 624 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 625 }
rgrover1 710:b2e1a2660ec2 626
rgrover1 710:b2e1a2660ec2 627 /**
rgrover1 710:b2e1a2660ec2 628 * @return Read back advertising data. Useful for storing and
rgrover1 710:b2e1a2660ec2 629 * restoring payload.
rgrover1 710:b2e1a2660ec2 630 */
rgrover1 710:b2e1a2660ec2 631 const GapAdvertisingData &getAdvertisingPayload(void) const {
rgrover1 710:b2e1a2660ec2 632 return _advPayload;
rgrover1 710:b2e1a2660ec2 633 }
rgrover1 710:b2e1a2660ec2 634
rgrover1 710:b2e1a2660ec2 635 /**
rgrover1 710:b2e1a2660ec2 636 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 637 * scanResponse payload.
rgrover1 710:b2e1a2660ec2 638 *
rgrover1 913:690bea02c431 639 * @param[in] type The type describing the variable length data.
rgrover1 913:690bea02c431 640 * @param[in] data Data bytes.
rgrover1 913:690bea02c431 641 * @param[in] len Length of data.
rgrover1 710:b2e1a2660ec2 642 */
rgrover1 710:b2e1a2660ec2 643 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 644 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 645 if ((rc = _scanResponse.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 646 return rc;
rgrover1 710:b2e1a2660ec2 647 }
rgrover1 710:b2e1a2660ec2 648
rgrover1 710:b2e1a2660ec2 649 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 650 }
rgrover1 710:b2e1a2660ec2 651
rgrover1 710:b2e1a2660ec2 652 /**
rgrover1 710:b2e1a2660ec2 653 * Reset any scan response prepared from prior calls to
rgrover1 710:b2e1a2660ec2 654 * accumulateScanResponse().
rgrover1 710:b2e1a2660ec2 655 *
rgrover1 710:b2e1a2660ec2 656 * Note: This should be followed by a call to setAdvertisingPayload() or
rgrover1 710:b2e1a2660ec2 657 * startAdvertising() before the update takes effect.
rgrover1 710:b2e1a2660ec2 658 */
rgrover1 710:b2e1a2660ec2 659 void clearScanResponse(void) {
rgrover1 710:b2e1a2660ec2 660 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 661 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 662 }
rgrover1 710:b2e1a2660ec2 663
rgrover1 710:b2e1a2660ec2 664 /**
rgrover1 913:690bea02c431 665 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 666 * @param[in] interval
rgrover1 710:b2e1a2660ec2 667 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 668 * @param[in] window
rgrover1 710:b2e1a2660ec2 669 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 670 * @param[in] timeout
rgrover1 913:690bea02c431 671 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
rgrover1 710:b2e1a2660ec2 672 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 673 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 674 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 675 *
rgrover1 710:b2e1a2660ec2 676 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 677 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 678 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 679 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 680 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 681 * interval.
rgrover1 710:b2e1a2660ec2 682 *
rgrover1 710:b2e1a2660ec2 683 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 684 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 685 *
rgrover1 710:b2e1a2660ec2 686 * @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1 710:b2e1a2660ec2 687 */
rgrover1 710:b2e1a2660ec2 688 ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1 710:b2e1a2660ec2 689 uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1 710:b2e1a2660ec2 690 uint16_t timeout = 0,
rgrover1 710:b2e1a2660ec2 691 bool activeScanning = false) {
rgrover1 710:b2e1a2660ec2 692 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 693 if (((rc = _scanningParams.setInterval(interval)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 694 ((rc = _scanningParams.setWindow(window)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 695 ((rc = _scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) {
rgrover1 710:b2e1a2660ec2 696 _scanningParams.setActiveScanning(activeScanning);
rgrover1 710:b2e1a2660ec2 697 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 698 }
rgrover1 710:b2e1a2660ec2 699
rgrover1 710:b2e1a2660ec2 700 return rc;
rgrover1 710:b2e1a2660ec2 701 }
rgrover1 710:b2e1a2660ec2 702
rgrover1 710:b2e1a2660ec2 703 /**
rgrover1 913:690bea02c431 704 * Set up the scanInterval parameter for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 705 * @param[in] interval
rgrover1 710:b2e1a2660ec2 706 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 707 *
rgrover1 710:b2e1a2660ec2 708 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 709 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 710 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 711 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 712 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 713 * interval.
rgrover1 710:b2e1a2660ec2 714 *
rgrover1 710:b2e1a2660ec2 715 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 716 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 717 */
rgrover1 710:b2e1a2660ec2 718 ble_error_t setScanInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 719 return _scanningParams.setInterval(interval);
rgrover1 710:b2e1a2660ec2 720 }
rgrover1 710:b2e1a2660ec2 721
rgrover1 710:b2e1a2660ec2 722 /**
rgrover1 913:690bea02c431 723 * Set up the scanWindow parameter for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 724 * @param[in] window
rgrover1 710:b2e1a2660ec2 725 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 726 *
rgrover1 710:b2e1a2660ec2 727 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 728 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 729 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 730 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 731 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 732 * interval.
rgrover1 710:b2e1a2660ec2 733 *
rgrover1 710:b2e1a2660ec2 734 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 735 * enabled by using startScan().
rgrover1 770:079b714e9c1a 736 *
rgrover1 770:079b714e9c1a 737 * If scanning is already active, the updated value of scanWindow will be
rgrover1 770:079b714e9c1a 738 * propagated to the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 739 */
rgrover1 710:b2e1a2660ec2 740 ble_error_t setScanWindow(uint16_t window) {
rgrover1 770:079b714e9c1a 741 ble_error_t rc;
rgrover1 770:079b714e9c1a 742 if ((rc = _scanningParams.setWindow(window)) != BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 743 return rc;
rgrover1 770:079b714e9c1a 744 }
rgrover1 770:079b714e9c1a 745
rgrover1 770:079b714e9c1a 746 /* If scanning is already active, propagate the new setting to the stack. */
rgrover1 770:079b714e9c1a 747 if (scanningActive) {
rgrover1 770:079b714e9c1a 748 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 749 }
rgrover1 770:079b714e9c1a 750
rgrover1 770:079b714e9c1a 751 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 752 }
rgrover1 710:b2e1a2660ec2 753
rgrover1 710:b2e1a2660ec2 754 /**
rgrover1 913:690bea02c431 755 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 756 * @param[in] timeout
rgrover1 913:690bea02c431 757 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
rgrover1 710:b2e1a2660ec2 758 *
rgrover1 710:b2e1a2660ec2 759 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 760 * enabled by using startScan().
rgrover1 770:079b714e9c1a 761 *
rgrover1 770:079b714e9c1a 762 * If scanning is already active, the updated value of scanTimeout will be
rgrover1 770:079b714e9c1a 763 * propagated to the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 764 */
rgrover1 710:b2e1a2660ec2 765 ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1 770:079b714e9c1a 766 ble_error_t rc;
rgrover1 770:079b714e9c1a 767 if ((rc = _scanningParams.setTimeout(timeout)) != BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 768 return rc;
rgrover1 770:079b714e9c1a 769 }
rgrover1 770:079b714e9c1a 770
rgrover1 770:079b714e9c1a 771 /* If scanning is already active, propagate the new settings to the stack. */
rgrover1 770:079b714e9c1a 772 if (scanningActive) {
rgrover1 770:079b714e9c1a 773 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 774 }
rgrover1 770:079b714e9c1a 775
rgrover1 770:079b714e9c1a 776 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 777 }
rgrover1 710:b2e1a2660ec2 778
rgrover1 710:b2e1a2660ec2 779 /**
rgrover1 913:690bea02c431 780 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 781 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 782 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 783 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 784 *
rgrover1 710:b2e1a2660ec2 785 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 786 * enabled by using startScan().
rgrover1 770:079b714e9c1a 787 *
rgrover1 770:079b714e9c1a 788 * If scanning is already in progress, then active-scanning will be enabled
rgrover1 770:079b714e9c1a 789 * for the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 790 */
rgrover1 770:079b714e9c1a 791 ble_error_t setActiveScanning(bool activeScanning) {
rgrover1 710:b2e1a2660ec2 792 _scanningParams.setActiveScanning(activeScanning);
rgrover1 770:079b714e9c1a 793
rgrover1 770:079b714e9c1a 794 /* If scanning is already active, propagate the new settings to the stack. */
rgrover1 770:079b714e9c1a 795 if (scanningActive) {
rgrover1 770:079b714e9c1a 796 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 797 }
rgrover1 770:079b714e9c1a 798
rgrover1 770:079b714e9c1a 799 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 800 }
rgrover1 710:b2e1a2660ec2 801
rgrover1 710:b2e1a2660ec2 802 /**
rgrover1 710:b2e1a2660ec2 803 * Start scanning (Observer Procedure) based on the parameters currently in
rgrover1 710:b2e1a2660ec2 804 * effect.
rgrover1 710:b2e1a2660ec2 805 *
rgrover1 710:b2e1a2660ec2 806 * @param[in] callback
rgrover1 913:690bea02c431 807 * The application-specific callback to be invoked upon
rgrover1 710:b2e1a2660ec2 808 * receiving every advertisement report. This can be passed in
rgrover1 710:b2e1a2660ec2 809 * as NULL, in which case scanning may not be enabled at all.
rgrover1 710:b2e1a2660ec2 810 */
rgrover1 710:b2e1a2660ec2 811 ble_error_t startScan(void (*callback)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 812 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 813 if (callback) {
rgrover1 710:b2e1a2660ec2 814 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 815 scanningActive = true;
rgrover1 710:b2e1a2660ec2 816 onAdvertisementReport.attach(callback);
rgrover1 710:b2e1a2660ec2 817 }
rgrover1 710:b2e1a2660ec2 818 }
rgrover1 710:b2e1a2660ec2 819
rgrover1 710:b2e1a2660ec2 820 return err;
rgrover1 710:b2e1a2660ec2 821 }
rgrover1 710:b2e1a2660ec2 822
rgrover1 710:b2e1a2660ec2 823 /**
rgrover1 710:b2e1a2660ec2 824 * Same as above, but this takes an (object, method) pair for a callback.
rgrover1 710:b2e1a2660ec2 825 */
rgrover1 710:b2e1a2660ec2 826 template<typename T>
rgrover1 710:b2e1a2660ec2 827 ble_error_t startScan(T *object, void (T::*callbackMember)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 828 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 829 if (object && callbackMember) {
rgrover1 710:b2e1a2660ec2 830 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 831 scanningActive = true;
rgrover1 710:b2e1a2660ec2 832 onAdvertisementReport.attach(object, callbackMember);
rgrover1 710:b2e1a2660ec2 833 }
rgrover1 710:b2e1a2660ec2 834 }
rgrover1 710:b2e1a2660ec2 835
rgrover1 710:b2e1a2660ec2 836 return err;
rgrover1 710:b2e1a2660ec2 837 }
rgrover1 710:b2e1a2660ec2 838
rgrover1 753:0f60274cd3ad 839 /**
rgrover1 753:0f60274cd3ad 840 * Initialize radio-notification events to be generated from the stack.
rgrover1 913:690bea02c431 841 * This API doesn't need to be called directly.
rgrover1 753:0f60274cd3ad 842 *
rgrover1 753:0f60274cd3ad 843 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 753:0f60274cd3ad 844 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 753:0f60274cd3ad 845 * radio is in use.
rgrover1 753:0f60274cd3ad 846 *
rgrover1 913:690bea02c431 847 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
rgrover1 913:690bea02c431 848 * signal is sent at the end of the radio event. These signals can be used
rgrover1 753:0f60274cd3ad 849 * by the application programmer to synchronize application logic with radio
rgrover1 753:0f60274cd3ad 850 * activity. For example, the ACTIVE signal can be used to shut off external
rgrover1 913:690bea02c431 851 * devices, to manage peak current drawn during periods when the radio is on,
rgrover1 753:0f60274cd3ad 852 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 753:0f60274cd3ad 853 *
rgrover1 753:0f60274cd3ad 854 * @return BLE_ERROR_NONE on successful initialization, otherwise an error code.
rgrover1 753:0f60274cd3ad 855 */
rgrover1 753:0f60274cd3ad 856 virtual ble_error_t initRadioNotification(void) {
rgrover1 753:0f60274cd3ad 857 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 753:0f60274cd3ad 858 }
rgrover1 753:0f60274cd3ad 859
rgrover1 710:b2e1a2660ec2 860 private:
rgrover1 710:b2e1a2660ec2 861 ble_error_t setAdvertisingData(void) {
rgrover1 710:b2e1a2660ec2 862 return setAdvertisingData(_advPayload, _scanResponse);
rgrover1 710:b2e1a2660ec2 863 }
rgrover1 710:b2e1a2660ec2 864
rgrover1 710:b2e1a2660ec2 865 private:
rgrover1 896:791741895cd8 866 virtual ble_error_t setAdvertisingData(const GapAdvertisingData &advData, const GapAdvertisingData &scanResponse) = 0;
rgrover1 896:791741895cd8 867 virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
rgrover1 710:b2e1a2660ec2 868
rgrover1 710:b2e1a2660ec2 869 public:
rgrover1 710:b2e1a2660ec2 870 /**
rgrover1 710:b2e1a2660ec2 871 * Accessors to read back currently active advertising params.
rgrover1 710:b2e1a2660ec2 872 */
rgrover1 710:b2e1a2660ec2 873 GapAdvertisingParams &getAdvertisingParams(void) {
rgrover1 710:b2e1a2660ec2 874 return _advParams;
rgrover1 710:b2e1a2660ec2 875 }
rgrover1 710:b2e1a2660ec2 876 const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1 710:b2e1a2660ec2 877 return _advParams;
rgrover1 710:b2e1a2660ec2 878 }
rgrover1 710:b2e1a2660ec2 879
rgrover1 710:b2e1a2660ec2 880 /**
rgrover1 913:690bea02c431 881 * Set up a particular, user-constructed set of advertisement parameters for
rgrover1 710:b2e1a2660ec2 882 * the underlying stack. It would be uncommon for this API to be used
rgrover1 710:b2e1a2660ec2 883 * directly; there are other APIs to tweak advertisement parameters
rgrover1 710:b2e1a2660ec2 884 * individually.
rgrover1 710:b2e1a2660ec2 885 */
rgrover1 710:b2e1a2660ec2 886 void setAdvertisingParams(const GapAdvertisingParams &newParams) {
rgrover1 710:b2e1a2660ec2 887 _advParams = newParams;
rgrover1 710:b2e1a2660ec2 888 }
rgrover1 710:b2e1a2660ec2 889
rgrover1 710:b2e1a2660ec2 890 /* Event callback handlers. */
rgrover1 710:b2e1a2660ec2 891 public:
rgrover1 710:b2e1a2660ec2 892 /**
rgrover1 913:690bea02c431 893 * Set up a callback for timeout events. Refer to TimeoutSource_t for
rgrover1 710:b2e1a2660ec2 894 * possible event types.
rgrover1 710:b2e1a2660ec2 895 */
rgrover1 920:d18cff0c4b09 896 void onTimeout(TimeoutEventCallback_t callback) {timeoutCallback = callback;}
rgrover1 710:b2e1a2660ec2 897
rgrover1 710:b2e1a2660ec2 898 /**
rgrover1 829:9072de50087b 899 * Append to a chain of callbacks to be invoked upon GAP connection.
rgrover1 710:b2e1a2660ec2 900 */
rgrover1 829:9072de50087b 901 void onConnection(ConnectionEventCallback_t callback) {connectionCallChain.add(callback);}
rgrover1 710:b2e1a2660ec2 902
rgrover1 829:9072de50087b 903 template<typename T>
rgrover1 829:9072de50087b 904 void onConnection(T *tptr, void (T::*mptr)(const ConnectionCallbackParams_t*)) {connectionCallChain.add(tptr, mptr);}
rgrover1 710:b2e1a2660ec2 905
rgrover1 710:b2e1a2660ec2 906 /**
rgrover1 829:9072de50087b 907 * Append to a chain of callbacks to be invoked upon GAP disconnection.
rgrover1 816:2b4f0ef8c06e 908 */
rgrover1 829:9072de50087b 909 void onDisconnection(DisconnectionEventCallback_t callback) {disconnectionCallChain.add(callback);}
rgrover1 816:2b4f0ef8c06e 910
rgrover1 710:b2e1a2660ec2 911 template<typename T>
rgrover1 829:9072de50087b 912 void onDisconnection(T *tptr, void (T::*mptr)(const DisconnectionCallbackParams_t*)) {disconnectionCallChain.add(tptr, mptr);}
rgrover1 710:b2e1a2660ec2 913
rgrover1 710:b2e1a2660ec2 914 /**
rgrover1 710:b2e1a2660ec2 915 * Set the application callback for radio-notification events.
rgrover1 710:b2e1a2660ec2 916 *
rgrover1 710:b2e1a2660ec2 917 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 710:b2e1a2660ec2 918 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 753:0f60274cd3ad 919 * radio is in use.
rgrover1 710:b2e1a2660ec2 920 *
rgrover1 913:690bea02c431 921 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
rgrover1 913:690bea02c431 922 * signal is sent at the end of the radio event. These signals can be used
rgrover1 710:b2e1a2660ec2 923 * by the application programmer to synchronize application logic with radio
rgrover1 710:b2e1a2660ec2 924 * activity. For example, the ACTIVE signal can be used to shut off external
rgrover1 913:690bea02c431 925 * devices, to manage peak current drawn during periods when the radio is on,
rgrover1 710:b2e1a2660ec2 926 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 710:b2e1a2660ec2 927 *
rgrover1 710:b2e1a2660ec2 928 * @param callback
rgrover1 710:b2e1a2660ec2 929 * The application handler to be invoked in response to a radio
rgrover1 710:b2e1a2660ec2 930 * ACTIVE/INACTIVE event.
rgrover1 754:9b391fb5c5d7 931 *
rgrover1 913:690bea02c431 932 * Or in the other version:
rgrover1 754:9b391fb5c5d7 933 *
rgrover1 754:9b391fb5c5d7 934 * @param tptr
rgrover1 754:9b391fb5c5d7 935 * Pointer to the object of a class defining the member callback
rgrover1 754:9b391fb5c5d7 936 * function (mptr).
rgrover1 754:9b391fb5c5d7 937 * @param mptr
rgrover1 754:9b391fb5c5d7 938 * The member callback (within the context of an object) to be
rgrover1 754:9b391fb5c5d7 939 * invoked in response to a radio ACTIVE/INACTIVE event.
rgrover1 710:b2e1a2660ec2 940 */
rgrover1 753:0f60274cd3ad 941 void onRadioNotification(void (*callback)(bool param)) {
rgrover1 753:0f60274cd3ad 942 radioNotificationCallback.attach(callback);
rgrover1 753:0f60274cd3ad 943 initRadioNotification();
rgrover1 753:0f60274cd3ad 944 }
rgrover1 753:0f60274cd3ad 945 template <typename T>
rgrover1 753:0f60274cd3ad 946 void onRadioNotification(T *tptr, void (T::*mptr)(bool)) {
rgrover1 753:0f60274cd3ad 947 radioNotificationCallback.attach(tptr, mptr);
rgrover1 753:0f60274cd3ad 948 initRadioNotification();
rgrover1 753:0f60274cd3ad 949 }
rgrover1 710:b2e1a2660ec2 950
rgrover1 710:b2e1a2660ec2 951 protected:
rgrover1 710:b2e1a2660ec2 952 Gap() :
rgrover1 710:b2e1a2660ec2 953 _advParams(),
rgrover1 710:b2e1a2660ec2 954 _advPayload(),
rgrover1 710:b2e1a2660ec2 955 _scanningParams(),
rgrover1 710:b2e1a2660ec2 956 _scanResponse(),
rgrover1 710:b2e1a2660ec2 957 state(),
rgrover1 770:079b714e9c1a 958 scanningActive(false),
rgrover1 920:d18cff0c4b09 959 timeoutCallback(NULL),
rgrover1 710:b2e1a2660ec2 960 radioNotificationCallback(),
rgrover1 710:b2e1a2660ec2 961 onAdvertisementReport(),
rgrover1 816:2b4f0ef8c06e 962 connectionCallChain(),
rgrover1 710:b2e1a2660ec2 963 disconnectionCallChain() {
rgrover1 710:b2e1a2660ec2 964 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 965 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 966 }
rgrover1 710:b2e1a2660ec2 967
rgrover1 710:b2e1a2660ec2 968 /* Entry points for the underlying stack to report events back to the user. */
rgrover1 710:b2e1a2660ec2 969 public:
rgrover1 710:b2e1a2660ec2 970 void processConnectionEvent(Handle_t handle,
rgrover1 710:b2e1a2660ec2 971 Role_t role,
rgrover1 710:b2e1a2660ec2 972 AddressType_t peerAddrType,
rgrover1 710:b2e1a2660ec2 973 const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 974 AddressType_t ownAddrType,
rgrover1 710:b2e1a2660ec2 975 const Address_t ownAddr,
rgrover1 710:b2e1a2660ec2 976 const ConnectionParams_t *connectionParams) {
rgrover1 710:b2e1a2660ec2 977 state.connected = 1;
rgrover1 829:9072de50087b 978 ConnectionCallbackParams_t callbackParams(handle, role, peerAddrType, peerAddr, ownAddrType, ownAddr, connectionParams);
rgrover1 829:9072de50087b 979 connectionCallChain.call(&callbackParams);
rgrover1 710:b2e1a2660ec2 980 }
rgrover1 710:b2e1a2660ec2 981
rgrover1 710:b2e1a2660ec2 982 void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
rgrover1 710:b2e1a2660ec2 983 state.connected = 0;
rgrover1 829:9072de50087b 984 DisconnectionCallbackParams_t callbackParams(handle, reason);
rgrover1 829:9072de50087b 985 disconnectionCallChain.call(&callbackParams);
rgrover1 710:b2e1a2660ec2 986 }
rgrover1 710:b2e1a2660ec2 987
rgrover1 710:b2e1a2660ec2 988 void processAdvertisementReport(const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 989 int8_t rssi,
rgrover1 710:b2e1a2660ec2 990 bool isScanResponse,
rgrover1 710:b2e1a2660ec2 991 GapAdvertisingParams::AdvertisingType_t type,
rgrover1 710:b2e1a2660ec2 992 uint8_t advertisingDataLen,
rgrover1 710:b2e1a2660ec2 993 const uint8_t *advertisingData) {
rgrover1 710:b2e1a2660ec2 994 AdvertisementCallbackParams_t params;
rgrover1 710:b2e1a2660ec2 995 memcpy(params.peerAddr, peerAddr, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 996 params.rssi = rssi;
rgrover1 710:b2e1a2660ec2 997 params.isScanResponse = isScanResponse;
rgrover1 710:b2e1a2660ec2 998 params.type = type;
rgrover1 710:b2e1a2660ec2 999 params.advertisingDataLen = advertisingDataLen;
rgrover1 710:b2e1a2660ec2 1000 params.advertisingData = advertisingData;
rgrover1 710:b2e1a2660ec2 1001 onAdvertisementReport.call(&params);
rgrover1 710:b2e1a2660ec2 1002 }
rgrover1 710:b2e1a2660ec2 1003
rgrover1 710:b2e1a2660ec2 1004 void processTimeoutEvent(TimeoutSource_t source) {
rgrover1 920:d18cff0c4b09 1005 if (timeoutCallback) {
rgrover1 920:d18cff0c4b09 1006 timeoutCallback(source);
rgrover1 710:b2e1a2660ec2 1007 }
rgrover1 710:b2e1a2660ec2 1008 }
rgrover1 710:b2e1a2660ec2 1009
rgrover1 710:b2e1a2660ec2 1010 protected:
rgrover1 710:b2e1a2660ec2 1011 GapAdvertisingParams _advParams;
rgrover1 710:b2e1a2660ec2 1012 GapAdvertisingData _advPayload;
rgrover1 710:b2e1a2660ec2 1013 GapScanningParams _scanningParams;
rgrover1 710:b2e1a2660ec2 1014 GapAdvertisingData _scanResponse;
rgrover1 710:b2e1a2660ec2 1015
rgrover1 710:b2e1a2660ec2 1016 GapState_t state;
rgrover1 770:079b714e9c1a 1017 bool scanningActive;
rgrover1 710:b2e1a2660ec2 1018
rgrover1 710:b2e1a2660ec2 1019 protected:
rgrover1 920:d18cff0c4b09 1020 TimeoutEventCallback_t timeoutCallback;
rgrover1 710:b2e1a2660ec2 1021 RadioNotificationEventCallback_t radioNotificationCallback;
rgrover1 710:b2e1a2660ec2 1022 AdvertisementReportCallback_t onAdvertisementReport;
rgrover1 829:9072de50087b 1023 CallChainOfFunctionPointersWithContext<const ConnectionCallbackParams_t*> connectionCallChain;
rgrover1 829:9072de50087b 1024 CallChainOfFunctionPointersWithContext<const DisconnectionCallbackParams_t*> disconnectionCallChain;
rgrover1 710:b2e1a2660ec2 1025
rgrover1 710:b2e1a2660ec2 1026 private:
rgrover1 913:690bea02c431 1027 /* Disallow copy and assignment. */
rgrover1 710:b2e1a2660ec2 1028 Gap(const Gap &);
rgrover1 710:b2e1a2660ec2 1029 Gap& operator=(const Gap &);
rgrover1 710:b2e1a2660ec2 1030 };
rgrover1 710:b2e1a2660ec2 1031
rgrover1 710:b2e1a2660ec2 1032 #endif // ifndef __GAP_H__