File content as of revision 19:269f19917d80:

#include "mbed.h"
#include "HIDScope.h"
#include "encoder.h"
#include "MODSERIAL.h"

//Motor 2
DigitalOut motor2direction(D4); //D4 en D5 zijn motor 2 (op het motorshield)
PwmOut motor2speed(D5); // D5 is an input on the motor that controls the speed of motor number 2
DigitalIn button(PTA4); // PTA4 is used as a button controller (0 when pressed and 1 when not pressed)
Encoder motor2(D13,D12); // The encoder is able to read and set position/speed values
MODSERIAL pc(USBTX,USBRX); // This input is used to send data to the pc
Ticker TickerController; // This adds a Ticker to the function +TickerController
//AnalogIn potmeter2(A0); /NIEUW

// Defining constants
double counts_per_revolution=4200; 
double degrees_per_turn=360;
double counts_per_degree=counts_per_revolution/degrees_per_turn; //11.67 counts/degree
const double motor2_Kp = 2.5; //controller gain which will be multiplied with the error (*how fast will the error be corrected)

// Function P-controller
double P(double error, const double Kp) //returns error * controller gain
{
    return Kp*error; 
}
// Function that calls the P-controller
void motor2_controller() // Void function that compares the current position with a reference value and outputs 
    {
        double reference=400; 
        double position=motor2.getPosition(); //current motor position
        double motor2_p_output=P((reference-position)*motor2_Kp); // reference-position=> current -> this is multiplied with the controller gain motor2_Kp
        

// MAIN
int main()
{
    pc.baud(9600); // baud rate at which the information is processed to the computer
    motor2.setPosition(0); // calls the current position of the motor zero
    while(true) {
        if (button.read() < 0.5) {   //if button pressed
            motor2direction = 0; // zero is clockwise (front view)
            motor2speed = 0.5f; // motorspeed
            pc.printf("positie = %d \r\n", motor2.getPosition());
        } else {                  // If button is not pressed
            motor2direction = 0;
            motor2speed = 0;
            //while (motor2_Controller /// WHILE MOTOR > ... <... HIER BEZIG
        
            pc.printf("positie = %d en Error_positie =%d \r\n", motor2.getPosition(), Error_position);
            //myControllerTicker.attach(&motor2_Controller,0.01f);
//  while (Error_position > 0) {
//                motor2direction = 0;
//                motor2speed=0.3f;}
//            while (Error_position < 0) {
//                motor2direction = 1;
//                motor2speed=0.3f;}
        }
        while(1) {}
        
        while ((motor2.getPosition()>counts_per_revolution) || (motor2.getPosition()<-counts_per_revolution)) // If value is outside -4200 and 4200 (number of counts equal to one revolution) reset to zero
        {
            motor2.setPosition(0);
            pc.printf(" HE \r\n LLO \r\n WO \r\n RLD \r\n !!! \r\n FOO! \r\n");
            break;
        } 
    }
    }