File content as of revision 0:6f4be1a7962c:

/*
   RCSwitch - Ported from the Arduino libary for remote control outlet switches
  Copyright (c) 2011 Suat Özgür.  All right reserved.

  Contributors:
  - Andre Koehler / info(at)tomate-online(dot)de
  - Gordeev Andrey Vladimirovich / gordeev(at)openpyro(dot)com
  - Skineffect / http://forum.ardumote.com/viewtopic.php?f=2&t=46
  - Dominik Fischer / dom_fischer(at)web(dot)de
  - Frank Oltmanns / <first name>.<last name>(at)gmail(dot)com
  - Chris Dick / Porting to mbed
  
  Project home: http://code.google.com/p/rc-switch/

  This library is free software; you can redistribute it and/or
  modify it under the terms of the GNU Lesser General Public
  License as published by the Free Software Foundation; either
  version 2.1 of the License, or (at your option) any later version.

  This library is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public
  License along with this library; if not, write to the Free Software
  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
*/
#include "RCSwitch.h"

    unsigned long RCSwitch::nReceivedValue = NULL;
    unsigned int RCSwitch::nReceivedBitlength = 0;
    unsigned int RCSwitch::nReceivedDelay = 0;
    unsigned int RCSwitch::nReceivedProtocol = 0;
    int RCSwitch::nReceiveTolerance = 60;
    unsigned int RCSwitch::timings[RCSWITCH_MAX_CHANGES];
    bool RCSwitch::TransmitEnablePin = false;
    bool RCSwitch::ReceiveEnabled = true;
    bool RCSwitch::TransmitEnable = true;

/** Class constructor.
 * The constructor assigns the specified pinout, attatches 
 * an Interrupt to the receive pin. for the LPC1768 this must not 
 * be pins 19 and 20. For the KL25Z, the pin must be on ports A or C
 * @param tx Transmitter pin of the RF module.
 * @param rx Receiver pin of the RF module.
 */
RCSwitch::RCSwitch(PinName tx, PinName rx) 
:
        _tx(DigitalOut(tx)),
        _rx(InterruptIn(rx)),
        _tx_en(NC)
{
  nReceivedDelay = 0;
  RCSwitch::nReceivedValue = NULL;
  nReceivedBitlength = 0;
  ReceiveEnabled = true;
  TransmitEnable = true;
  TransmitEnablePin = false;
  setRepeatTransmit(15);
  setProtocol(1);
  setReceiveTolerance(60);
  _rx.rise(this, &RCSwitch::RCSwitchRxPinChange);
  _rx.fall(this, &RCSwitch::RCSwitchRxPinChange);
  timer.start();
}

 /** Class constructor.
 * The constructor assigns the specified pinout, attatches 
 * an Interrupt to the receive pin. for the LPC1768 this must not 
 * be pins 19 and 20. For the KL25Z, the pin must be on ports A or C
 * @param tx    Transmitter pin of the RF module.
 * @param rx    Receiver pin of the RF module.
 * @param tx_en Enable pin of the transmitter
 */
RCSwitch::RCSwitch(PinName tx, PinName rx, PinName tx_en) 
:
        _tx(DigitalOut(tx)),
        _rx(InterruptIn(rx)),
        _tx_en(DigitalOut(tx_en))
{
  nReceivedDelay = 0;
  RCSwitch::nReceivedValue = NULL;
  nReceivedBitlength = 0;
  ReceiveEnabled = true;
  TransmitEnable = false;
  TransmitEnablePin = true;
  setRepeatTransmit(15);
  setProtocol(1);
  setReceiveTolerance(60);
  _rx.rise(this, &RCSwitch::RCSwitchRxPinChange);
  _rx.fall(this, &RCSwitch::RCSwitchRxPinChange);
  timer.start();
 
}
 
/**
 * Set protocol to be used in transmission
 * @param nProtocol Protocol type ot transmit
 */ 
void RCSwitch::setProtocol(int nProtocol) {
  this->nProtocol = nProtocol;
  if (nProtocol == 1){
    this->setPulseLength(350);
  }
  else if (nProtocol == 2) {
    this->setPulseLength(650);
  }
  else if (nProtocol == 3) {
    this->setPulseLength(100);
  }
}

/**
 * Set protocol to be used in transmission
 * @param nProtocol Protocol type ot transmit
 * @param nPulseLength Length of each pulse
 */  
void RCSwitch::setProtocol(int nProtocol, int nPulseLength) {
  this->nProtocol = nProtocol;
  this->setPulseLength(nPulseLength);
}


/**
 *  Set pulse length in micro seconds
 * @param nPulseLength the Length of the pulse
 */  
void RCSwitch::setPulseLength(int nPulseLength) {
  this->nPulseLength = nPulseLength;
}

/**
 * Set number of times to repeat transmission
 * @param nRepeat Number of repeats
 */  
void RCSwitch::setRepeatTransmit(int nRepeatTransmit) {
  this->nRepeatTransmit = nRepeatTransmit;
}

/**
 * Set receive tolerance
 * @param nPercent Percentage tolerance of the receiver
 */  
void RCSwitch::setReceiveTolerance(int nPercent) {
  RCSwitch::nReceiveTolerance = nPercent;
}
  

/**
 * Enable the transmitter
 */  
void RCSwitch::enableTransmit() { 
    if (TransmitEnablePin == true)
    {
        _tx_en = true;
    }
    TransmitEnable = true;
}

/**
 * Disable the transmitter
 */
void RCSwitch::disableTransmit() {
    if (TransmitEnablePin == true)
    {
        _tx_en = false;
    }
    TransmitEnable = false;
}

/**
 * Switch a remote switch on (Type D REV)
 *
 * @param sGroup        Code of the switch group (A,B,C,D)
 * @param nDevice       Number of the switch itself (1..3)
 */
void RCSwitch::switchOn(char sGroup, int nDevice) {
  this->sendTriState( this->getCodeWordD(sGroup, nDevice, true) );
}

/**
 * Switch a remote switch off (Type D REV)
 *
 * @param sGroup        Code of the switch group (A,B,C,D)
 * @param nDevice       Number of the switch itself (1..3)
 */
void RCSwitch::switchOff(char sGroup, int nDevice) {
  this->sendTriState( this->getCodeWordD(sGroup, nDevice, false) );
}

/**
 * Switch a remote switch on (Type C Intertechno)
 *
 * @param sFamily  Familycode (a..f)
 * @param nGroup   Number of group (1..4)
 * @param nDevice  Number of device (1..4)
  */
void RCSwitch::switchOn(char sFamily, int nGroup, int nDevice) {
  this->sendTriState( this->getCodeWordC(sFamily, nGroup, nDevice, true) );
}

/**
 * Switch a remote switch off (Type C Intertechno)
 *
 * @param sFamily  Familycode (a..f)
 * @param nGroup   Number of group (1..4)
 * @param nDevice  Number of device (1..4)
 */
void RCSwitch::switchOff(char sFamily, int nGroup, int nDevice) {
  this->sendTriState( this->getCodeWordC(sFamily, nGroup, nDevice, false) );
}

/**
 * Switch a remote switch on (Type B with two rotary/sliding switches)
 *
 * @param nAddressCode  Number of the switch group (1..4)
 * @param nChannelCode  Number of the switch itself (1..4)
 */
void RCSwitch::switchOn(int nAddressCode, int nChannelCode) {
  this->sendTriState( this->getCodeWordB(nAddressCode, nChannelCode, true) );
}

/**
 * Switch a remote switch off (Type B with two rotary/sliding switches)
 *
 * @param nAddressCode  Number of the switch group (1..4)
 * @param nChannelCode  Number of the switch itself (1..4)
 */
void RCSwitch::switchOff(int nAddressCode, int nChannelCode) {
  this->sendTriState( this->getCodeWordB(nAddressCode, nChannelCode, false) );
}

/**
 * Deprecated, use switchOn(char* sGroup, char* sDevice) instead!
 * Switch a remote switch on (Type A with 10 pole DIP switches)
 *
 * @param sGroup        Code of the switch group (refers to DIP switches 1..5 where "1" = on and "0" = off, if all DIP switches are on it's "11111")
 * @param nChannelCode  Number of the switch itself (1..5)
 */
void RCSwitch::switchOn(char* sGroup, int nChannel) {
  char* code[6] = { "00000", "10000", "01000", "00100", "00010", "00001" };
  this->switchOn(sGroup, code[nChannel]);
}

/**
 * Deprecated, use switchOff(char* sGroup, char* sDevice) instead!
 * Switch a remote switch off (Type A with 10 pole DIP switches)
 *
 * @param sGroup        Code of the switch group (refers to DIP switches 1..5 where "1" = on and "0" = off, if all DIP switches are on it's "11111")
 * @param nChannelCode  Number of the switch itself (1..5)
 */
void RCSwitch::switchOff(char* sGroup, int nChannel) {
  char* code[6] = { "00000", "10000", "01000", "00100", "00010", "00001" };
  this->switchOff(sGroup, code[nChannel]);
}

/**
 * Switch a remote switch on (Type A with 10 pole DIP switches)
 *
 * @param sGroup        Code of the switch group (refers to DIP switches 1..5 where "1" = on and "0" = off, if all DIP switches are on it's "11111")
 * @param sDevice       Code of the switch device (refers to DIP switches 6..10 (A..E) where "1" = on and "0" = off, if all DIP switches are on it's "11111")
 */
void RCSwitch::switchOn(char* sGroup, char* sDevice) {
    this->sendTriState( this->getCodeWordA(sGroup, sDevice, true) );
}

/**
 * Switch a remote switch off (Type A with 10 pole DIP switches)
 *
 * @param sGroup        Code of the switch group (refers to DIP switches 1..5 where "1" = on and "0" = off, if all DIP switches are on it's "11111")
 * @param sDevice       Code of the switch device (refers to DIP switches 6..10 (A..E) where "1" = on and "0" = off, if all DIP switches are on it's "11111")
 */
void RCSwitch::switchOff(char* sGroup, char* sDevice) {
    this->sendTriState( this->getCodeWordA(sGroup, sDevice, false) );
}

/**
 * Returns a char[13], representing the Code Word to be send.
 * A Code Word consists of 9 address bits, 3 data bits and one sync bit but in our case only the first 8 address bits and the last 2 data bits were used.
 * A Code Bit can have 4 different states: "F" (floating), "0" (low), "1" (high), "S" (synchronous bit)
 *
 * +-------------------------------+--------------------------------+-----------------------------------------+-----------------------------------------+----------------------+------------+
 * | 4 bits address (switch group) | 4 bits address (switch number) | 1 bit address (not used, so never mind) | 1 bit address (not used, so never mind) | 2 data bits (on|off) | 1 sync bit |
 * | 1=0FFF 2=F0FF 3=FF0F 4=FFF0   | 1=0FFF 2=F0FF 3=FF0F 4=FFF0    | F                                       | F                                       | on=FF off=F0         | S          |
 * +-------------------------------+--------------------------------+-----------------------------------------+-----------------------------------------+----------------------+------------+
 *
 * @param nAddressCode  Number of the switch group (1..4)
 * @param nChannelCode  Number of the switch itself (1..4)
 * @param bStatus       Wether to switch on (true) or off (false)
 *
 * @return char[13]
 */
char* RCSwitch::getCodeWordB(int nAddressCode, int nChannelCode, bool bStatus) {
   int nReturnPos = 0;
   static char sReturn[13];
   
   char* code[5] = { "FFFF", "0FFF", "F0FF", "FF0F", "FFF0" };
   if (nAddressCode < 1 || nAddressCode > 4 || nChannelCode < 1 || nChannelCode > 4) {
    return '\0';
   }
   for (int i = 0; i<4; i++) {
     sReturn[nReturnPos++] = code[nAddressCode][i];
   }

   for (int i = 0; i<4; i++) {
     sReturn[nReturnPos++] = code[nChannelCode][i];
   }
   
   sReturn[nReturnPos++] = 'F';
   sReturn[nReturnPos++] = 'F';
   sReturn[nReturnPos++] = 'F';
   
   if (bStatus) {
      sReturn[nReturnPos++] = 'F';
   } else {
      sReturn[nReturnPos++] = '0';
   }
   
   sReturn[nReturnPos] = '\0';
   
   return sReturn;
}

/**
 * Returns a char[13], representing the Code Word to be send.
 *
 * getCodeWordA(char*, char*)
 *
 */
char* RCSwitch::getCodeWordA(char* sGroup, char* sDevice, bool bOn) {
    static char sDipSwitches[13];
    int i = 0;
    int j = 0;
    
    for (i=0; i < 5; i++) {
        if (sGroup[i] == '0') {
            sDipSwitches[j++] = 'F';
        } else {
            sDipSwitches[j++] = '0';
        }
    }

    for (i=0; i < 5; i++) {
        if (sDevice[i] == '0') {
            sDipSwitches[j++] = 'F';
        } else {
            sDipSwitches[j++] = '0';
        }
    }

    if ( bOn ) {
        sDipSwitches[j++] = '0';
        sDipSwitches[j++] = 'F';
    } else {
        sDipSwitches[j++] = 'F';
        sDipSwitches[j++] = '0';
    }

    sDipSwitches[j] = '\0';

    return sDipSwitches;
}

/**
 * Like getCodeWord (Type C = Intertechno)
 */
char* RCSwitch::getCodeWordC(char sFamily, int nGroup, int nDevice, bool bStatus) {
  static char sReturn[13];
  int nReturnPos = 0;
  
  if ( (char)sFamily < 97 || (char)sFamily > 112 || nGroup < 1 || nGroup > 4 || nDevice < 1 || nDevice > 4) {
    return '\0';
  }
  
  char* sDeviceGroupCode =  dec2binWzerofill(  (nDevice-1) + (nGroup-1)*4, 4  );
  char familycode[16][5] = { "0000", "F000", "0F00", "FF00", "00F0", "F0F0", "0FF0", "FFF0", "000F", "F00F", "0F0F", "FF0F", "00FF", "F0FF", "0FFF", "FFFF" };
  for (int i = 0; i<4; i++) {
    sReturn[nReturnPos++] = familycode[ (int)sFamily - 97 ][i];
  }
  for (int i = 0; i<4; i++) {
    sReturn[nReturnPos++] = (sDeviceGroupCode[3-i] == '1' ? 'F' : '0');
  }
  sReturn[nReturnPos++] = '0';
  sReturn[nReturnPos++] = 'F';
  sReturn[nReturnPos++] = 'F';
  if (bStatus) {
    sReturn[nReturnPos++] = 'F';
  } else {
    sReturn[nReturnPos++] = '0';
  }
  sReturn[nReturnPos] = '\0';
  return sReturn;
}

/**
 * Decoding for the REV Switch Type
 *
 * Returns a char[13], representing the Tristate to be send.
 * A Code Word consists of 7 address bits and 5 command data bits.
 * A Code Bit can have 3 different states: "F" (floating), "0" (low), "1" (high)
 *
 * +-------------------------------+--------------------------------+-----------------------+
 * | 4 bits address (switch group) | 3 bits address (device number) | 5 bits (command data) |
 * | A=1FFF B=F1FF C=FF1F D=FFF1   | 1=0FFF 2=F0FF 3=FF0F 4=FFF0    | on=00010 off=00001    |
 * +-------------------------------+--------------------------------+-----------------------+
 *
 * Source: http://www.the-intruder.net/funksteckdosen-von-rev-uber-arduino-ansteuern/
 *
 * @param sGroup        Name of the switch group (A..D, resp. a..d) 
 * @param nDevice       Number of the switch itself (1..3)
 * @param bStatus       Wether to switch on (true) or off (false)
 *
 * @return char[13]
 */

char* RCSwitch::getCodeWordD(char sGroup, int nDevice, bool bStatus){
    static char sReturn[13];
    int nReturnPos = 0;

    // Building 4 bits address
    // (Potential problem if dec2binWcharfill not returning correct string)
    char *sGroupCode;
    switch(sGroup){
        case 'a':
        case 'A':
            sGroupCode = dec2binWcharfill(8, 4, 'F'); break;
        case 'b':
        case 'B':
            sGroupCode = dec2binWcharfill(4, 4, 'F'); break;
        case 'c':
        case 'C':
            sGroupCode = dec2binWcharfill(2, 4, 'F'); break;
        case 'd':
        case 'D':
            sGroupCode = dec2binWcharfill(1, 4, 'F'); break;
        default:
            return '\0';
    }
    
    for (int i = 0; i<4; i++)
    {
        sReturn[nReturnPos++] = sGroupCode[i];
    }


    // Building 3 bits address
    // (Potential problem if dec2binWcharfill not returning correct string)
    char *sDevice;
    switch(nDevice) {
        case 1:
            sDevice = dec2binWcharfill(4, 3, 'F'); break;
        case 2:
            sDevice = dec2binWcharfill(2, 3, 'F'); break;
        case 3:
            sDevice = dec2binWcharfill(1, 3, 'F'); break;
        default:
            return '\0';
    }

    for (int i = 0; i<3; i++)
        sReturn[nReturnPos++] = sDevice[i];

    // fill up rest with zeros
    for (int i = 0; i<5; i++)
        sReturn[nReturnPos++] = '0';

    // encode on or off
    if (bStatus)
        sReturn[10] = '1';
    else
        sReturn[11] = '1';

    // last position terminate string
    sReturn[12] = '\0';
    return sReturn;

}

/**
 * Sends a codeword
 * @param sCodeWord   Codeword to be sent
 */
void RCSwitch::sendTriState(char* sCodeWord) {
  for (int nRepeat=0; nRepeat<nRepeatTransmit; nRepeat++) {
    int i = 0;
    while (sCodeWord[i] != '\0') {
      switch(sCodeWord[i]) {
        case '0':
          this->sendT0();
        break;
        case 'F':
          this->sendTF();
        break;
        case '1':
          this->sendT1();
        break;
      }
      i++;
    }
    this->sendSync();    
  }
}

void RCSwitch::send(unsigned long Code, unsigned int length) {
  this->send( this->dec2binWzerofill(Code, length) );
}

void RCSwitch::send(char* sCodeWord) {
  for (int nRepeat=0; nRepeat<nRepeatTransmit; nRepeat++) {
    int i = 0;
    while (sCodeWord[i] != '\0') {
      switch(sCodeWord[i]) {
        case '0':
          this->send0();
        break;
        case '1':
          this->send1();
        break;
      }
      i++;
    }
    this->sendSync();
  }
}

void RCSwitch::transmit(int nHighPulses, int nLowPulses) {
    bool disabled_Receive = false;
    
    if (TransmitEnable) {
        if (ReceiveEnabled) {
            this->disableReceive();
            disabled_Receive = true;
        }
        _tx = 1;
        wait_us(this->nPulseLength * nHighPulses);
        _tx = 0;
        wait_us(this->nPulseLength *nLowPulses);
        if(disabled_Receive){
            this->enableReceive();
        }
    }
}
/**
 * Sends a "0" Bit
 *                       _    
 * Waveform Protocol 1: | |___
 *                       _  
 * Waveform Protocol 2: | |__
 */
void RCSwitch::send0() {
    if (this->nProtocol == 1){
        this->transmit(1,3);
    }
    else if (this->nProtocol == 2) {
        this->transmit(1,2);
    }
    else if (this->nProtocol == 3) {
        this->transmit(4,11);
    }
}

/**
 * Sends a "1" Bit
 *                       ___  
 * Waveform Protocol 1: |   |_
 *                       __  
 * Waveform Protocol 2: |  |_
 */
void RCSwitch::send1() {
      if (this->nProtocol == 1){
        this->transmit(3,1);
    }
    else if (this->nProtocol == 2) {
        this->transmit(2,1);
    }
    else if (this->nProtocol == 3) {
        this->transmit(9,6);
    }
}


/**
 * Sends a Tri-State "0" Bit
 *            _     _
 * Waveform: | |___| |___
 */
void RCSwitch::sendT0() {
  this->transmit(1,3);
  this->transmit(1,3);
}

/**
 * Sends a Tri-State "1" Bit
 *            ___   ___
 * Waveform: |   |_|   |_
 */
void RCSwitch::sendT1() {
  this->transmit(3,1);
  this->transmit(3,1);
}

/**
 * Sends a Tri-State "F" Bit
 *            _     ___
 * Waveform: | |___|   |_
 */
void RCSwitch::sendTF() {
  this->transmit(1,3);
  this->transmit(3,1);
}

/**
 * Sends a "Sync" Bit
 *                       _
 * Waveform Protocol 1: | |_______________________________
 *                       _
 * Waveform Protocol 2: | |__________
 */
void RCSwitch::sendSync() {

    if (this->nProtocol == 1){
        this->transmit(1,31);
    }
    else if (this->nProtocol == 2) {
        this->transmit(1,10);
    }
    else if (this->nProtocol == 3) {
        this->transmit(1,71);
    }
}

/**
 * Enable receiving data
 */
void RCSwitch::enableReceive() {
    RCSwitch::nReceivedValue = NULL;
    RCSwitch::nReceivedBitlength = NULL;
    _rx.enable_irq();
    ReceiveEnabled = true;
}

/**
 * Disable receiving data This disables the interrupt
 * which may disable the port
 */
void RCSwitch::disableReceive() {
    _rx.disable_irq();
    ReceiveEnabled = false;
}

bool RCSwitch::available() {
    return RCSwitch::nReceivedValue != NULL;
}

void RCSwitch::resetAvailable() {
  RCSwitch::nReceivedValue = NULL;
}

unsigned long RCSwitch::getReceivedValue() {
    return RCSwitch::nReceivedValue;
}

unsigned int RCSwitch::getReceivedBitlength() {
  return RCSwitch::nReceivedBitlength;
}

unsigned int RCSwitch::getReceivedDelay() {
  return nReceivedDelay;
}

unsigned int RCSwitch::getReceivedProtocol() {
  return RCSwitch::nReceivedProtocol;
}

unsigned int* RCSwitch::getReceivedRawdata() {
    return RCSwitch::timings;
}

/**
 *
 */
bool RCSwitch::receiveProtocol1(unsigned int changeCount){
    
      unsigned long code = 0;
      unsigned long delay = RCSwitch::timings[0] / 31;
      unsigned long delayTolerance = delay * RCSwitch::nReceiveTolerance * 0.01;    

      for (int i = 1; i<changeCount ; i=i+2) {
      
          if (RCSwitch::timings[i] > delay-delayTolerance && RCSwitch::timings[i] < delay+delayTolerance && RCSwitch::timings[i+1] > delay*3-delayTolerance && RCSwitch::timings[i+1] < delay*3+delayTolerance) {
            code = code << 1;
          } else if (RCSwitch::timings[i] > delay*3-delayTolerance && RCSwitch::timings[i] < delay*3+delayTolerance && RCSwitch::timings[i+1] > delay-delayTolerance && RCSwitch::timings[i+1] < delay+delayTolerance) {
            code+=1;
            code = code << 1;
          } else {
            // Failed
            i = changeCount;
            code = 0;
          }
      }      
      code = code >> 1;
    if (changeCount > 6) {    // ignore < 4bit values as there are no devices sending 4bit values => noise
      RCSwitch::nReceivedValue = code;
      RCSwitch::nReceivedBitlength = changeCount / 2;
      nReceivedDelay = delay;
      RCSwitch::nReceivedProtocol = 1;
    }

    if (code == 0){
        return false;
    }
    return true;
}

bool RCSwitch::receiveProtocol2(unsigned int changeCount){
    
      unsigned long code = 0;
      unsigned long delay = RCSwitch::timings[0] / 10;
      unsigned long delayTolerance = delay * RCSwitch::nReceiveTolerance * 0.01;    

      for (int i = 1; i<changeCount ; i=i+2) {
      
          if (RCSwitch::timings[i] > delay-delayTolerance && RCSwitch::timings[i] < delay+delayTolerance && RCSwitch::timings[i+1] > delay*2-delayTolerance && RCSwitch::timings[i+1] < delay*2+delayTolerance) {
            code = code << 1;
          } else if (RCSwitch::timings[i] > delay*2-delayTolerance && RCSwitch::timings[i] < delay*2+delayTolerance && RCSwitch::timings[i+1] > delay-delayTolerance && RCSwitch::timings[i+1] < delay+delayTolerance) {
            code+=1;
            code = code << 1;
          } else {
            // Failed
            i = changeCount;
            code = 0;
          }
      }      
      code = code >> 1;
    if (changeCount > 6) {    // ignore < 4bit values as there are no devices sending 4bit values => noise
      RCSwitch::nReceivedValue = code;
      RCSwitch::nReceivedBitlength = changeCount / 2;
      nReceivedDelay = delay;
      RCSwitch::nReceivedProtocol = 2;
    }

    if (code == 0){
        return false;
    }
    return true;
}

/** Protocol 3 is used by BL35P02.
 *
 */
bool RCSwitch::receiveProtocol3(unsigned int changeCount){
    
      unsigned long code = 0;
      unsigned long delay = RCSwitch::timings[0] / PROTOCOL3_SYNC_FACTOR;
      unsigned long delayTolerance = delay * RCSwitch::nReceiveTolerance * 0.01;    

      for (int i = 1; i<changeCount ; i=i+2) {
      
          if  (RCSwitch::timings[i]   > delay*PROTOCOL3_0_HIGH_CYCLES - delayTolerance
            && RCSwitch::timings[i]   < delay*PROTOCOL3_0_HIGH_CYCLES + delayTolerance
            && RCSwitch::timings[i+1] > delay*PROTOCOL3_0_LOW_CYCLES  - delayTolerance
            && RCSwitch::timings[i+1] < delay*PROTOCOL3_0_LOW_CYCLES  + delayTolerance) {
            code = code << 1;
          } else if (RCSwitch::timings[i]   > delay*PROTOCOL3_1_HIGH_CYCLES - delayTolerance
                  && RCSwitch::timings[i]   < delay*PROTOCOL3_1_HIGH_CYCLES + delayTolerance
                  && RCSwitch::timings[i+1] > delay*PROTOCOL3_1_LOW_CYCLES  - delayTolerance
                  && RCSwitch::timings[i+1] < delay*PROTOCOL3_1_LOW_CYCLES  + delayTolerance) {
            code+=1;
            code = code << 1;
          } else {
            // Failed
            i = changeCount;
            code = 0;
          }
      }      
      code = code >> 1;
      if (changeCount > 6) {    // ignore < 4bit values as there are no devices sending 4bit values => noise
        RCSwitch::nReceivedValue = code;
        RCSwitch::nReceivedBitlength = changeCount / 2;
        nReceivedDelay = delay;
        RCSwitch::nReceivedProtocol = 3;
      }

      if (code == 0){
        return false;
      }
      return true;
}

void RCSwitch::RCSwitchRxPinChange() {

  static unsigned int duration;
  static unsigned int changeCount;
  static unsigned int repeatCount;
  timer.stop();
  duration = timer.read_us();
  timer.reset();
  timer.start();
  
 
  if (duration > 5000 && duration > RCSwitch::timings[0] - 200 && duration < RCSwitch::timings[0] + 200) {
    repeatCount++;
    changeCount--;
    
    if (repeatCount == 2) {
      if (receiveProtocol1(changeCount) == false){
        if (receiveProtocol2(changeCount) == false){
          if (receiveProtocol3(changeCount) == false){
            //failed
          }
        }
      }
      repeatCount = 0;
    }
    changeCount = 0;
  } else if (duration > 5000) {
    
    changeCount = 0;
  }
 
  if (changeCount >= RCSWITCH_MAX_CHANGES) {
    changeCount = 0;
    repeatCount = 0;
  }
  RCSwitch::timings[changeCount++] = duration;
}

/**
  * Turns a decimal value to its binary representation
  */
char* RCSwitch::dec2binWzerofill(unsigned long Dec, unsigned int bitLength){
    return dec2binWcharfill(Dec, bitLength, '0');
}

char* RCSwitch::dec2binWcharfill(unsigned long Dec, unsigned int bitLength, char fill){
  static char bin[64];
  unsigned int i=0;

  while (Dec > 0) {
    bin[32+i++] = ((Dec & 1) > 0) ? '1' : fill;
    Dec = Dec >> 1;
  }

  for (unsigned int j = 0; j< bitLength; j++) {
    if (j >= bitLength - i) {
      bin[j] = bin[ 31 + i - (j - (bitLength - i)) ];
    }else {
      bin[j] = fill;
    }
  }
  bin[bitLength] = '\0';
  
  return bin;
}