![](/media/cache/profiles/6f7790bb54a7c5d3dea27385488a604a.jpg.50x50_q85.jpg)
putting strings to xbee
Dependencies: BMP085 SDFileSystem mbed JPEGCamera
Fork of SaibiCansat2014 by
main.cpp
- Committer:
- TakashiSasaki
- Date:
- 2014-07-14
- Revision:
- 2:71f75585db19
- Parent:
- 1:31e810237ac1
- Child:
- 3:7ea76022b5eb
File content as of revision 2:71f75585db19:
#include "mbed.h" #include "SDFileSystem.h" #include "BMP085.h" #include "ADXL345_I2C.h" SDFileSystem sd(p5, p6, p7, p8, "sd"); ADXL345_I2C accelerometer(p28, p27); BMP085 bmp085(p28, p27); Serial pc(USBTX, USBRX); AnalogIn ain_CDS(p15); AnalogIn ain_Humedity(p16); AnalogIn ain_LM35DZ(p20); DigitalOut myled(LED1); int fileio() { mkdir("/sd/20014", 0777); FILE *fp = fopen("/sd/mydir/datalog.txt", "w"); if(fp == NULL) { error("Could not open file for write\n"); } fprintf(fp, "Hello fun SD Card World!"); fclose(fp); printf("Goodbye World!\n"); return(0); } int main() { myled = 1; pc.baud(115200); int readings[3] = {0, 0, 0}; pc.printf("Starting ADXL345 test...\n"); wait(.001); pc.printf("Device ID is: 0x%02x\n", accelerometer.getDeviceID()); wait(.001); // These are here to test whether any of the initialization fails. It will print the failure if (accelerometer.setPowerControl(0x00)){ pc.printf("didn't intitialize power control\n"); return 0; } //Full resolution, +/-16g, 4mg/LSB. wait(.001); if(accelerometer.setDataFormatControl(0x0B)){ pc.printf("didn't set data format\n"); return 0; } wait(.001); //3.2kHz data rate. if(accelerometer.setDataRate(ADXL345_3200HZ)){ pc.printf("didn't set data rate\n"); return 0; } wait(.001); //Measurement mode. if(accelerometer.setPowerControl(MeasurementMode)) { pc.printf("didn't set the power control to measurement\n"); return 0; } myled = 0; while (1) { wait(1.5); //BOSH BMP085 Barometric pressure,temperature measurement accelerometer.getOutput(readings); pc.printf("ADXL345 ------------------------\n"); pc.printf(" %+4.2f, %+4.2f, %+4.2f\n", (float((int16_t)readings[0]+18)/256), (float((int16_t)readings[1]-4 )/256), (float((int16_t)readings[2]+22)/256)); bmp085.update(); //ADXL 345 Acceleration measurement pc.printf("\nBOSH BMP085 --------------------\n"); pc.printf(" p:%6.2f hPa / t:%6.2f C\n", bmp085.get_pressure(), bmp085.get_temperature()); //CSDS Ambient light measurement P15 analog-in1 pc.printf("Ambient light :: %f\n",ain_CDS*100); //Humidity measurement P16 analog-in2 pc.printf("Humidity :: %f\n",ain_Humedity*100); //LM35DZ Temperature measurement P20 analog-in6 pc.printf("Temperature :: %f\n",ain_LM35DZ*100); } }