Sergey Pastor
Webserver+3d print
cyclone_tcp/drivers/dp83620.h
- Committer:
- Sergunb
- Date:
- 2017-02-04
- Revision:
- 0:8918a71cdbe9
File content as of revision 0:8918a71cdbe9:
/**
* @file dp83620.h
* @brief DP83620 Ethernet PHY transceiver
*
* @section License
*
* Copyright (C) 2010-2017 Oryx Embedded SARL. All rights reserved.
*
* This file is part of CycloneTCP Open.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
* @author Oryx Embedded SARL (www.oryx-embedded.com)
* @version 1.7.6
**/
#ifndef _DP83620_H
#define _DP83620_H
//Dependencies
#include "core/nic.h"
//PHY address
#ifndef DP83620_PHY_ADDR
#define DP83620_PHY_ADDR 1
#elif (DP83620_PHY_ADDR < 0 || DP83620_PHY_ADDR > 31)
#error DP83620_PHY_ADDR parameter is not valid
#endif
//DP83620 registers
#define DP83620_PHY_REG_BMCR 0x00
#define DP83620_PHY_REG_BMSR 0x01
#define DP83620_PHY_REG_PHYIDR1 0x02
#define DP83620_PHY_REG_PHYIDR2 0x03
#define DP83620_PHY_REG_ANAR 0x04
#define DP83620_PHY_REG_ANLPAR 0x05
#define DP83620_PHY_REG_ANER 0x06
#define DP83620_PHY_REG_ANNPTR 0x07
#define DP83620_PHY_REG_PHYSTS 0x10
#define DP83620_PHY_REG_MICR 0x11
#define DP83620_PHY_REG_MISR 0x12
#define DP83620_PHY_REG_PAGESEL 0x13
//Extended registers (page 0)
#define DP83620_PHY_REG_FCSCR 0x14
#define DP83620_PHY_REG_RECR 0x15
#define DP83620_PHY_REG_PCSR 0x16
#define DP83620_PHY_REG_RBR 0x17
#define DP83620_PHY_REG_LEDCR 0x18
#define DP83620_PHY_REG_PHYCR 0x19
#define DP83620_PHY_REG_10BTSCR 0x1A
#define DP83620_PHY_REG_CDCTRL1 0x1B
#define DP83620_PHY_REG_PHYCR2 0x1C
#define DP83620_PHY_REG_EDCR 0x1D
#define DP83620_PHY_REG_PCFCR 0x1F
//Extended registers (page 1)
#define DP83620_PHY_REG_SD_CNFG 0x1E
//Extended registers (page 2)
#define DP83620_PHY_REG_LEN100_DET 0x14
#define DP83620_PHY_REG_FREQ100 0x15
#define DP83620_PHY_REG_TDR_CTRL 0x16
#define DP83620_PHY_REG_TDR_WIN 0x17
#define DP83620_PHY_REG_TDR_PEAK 0x18
#define DP83620_PHY_REG_TDR_THR 0x19
#define DP83620_PHY_REG_VAR_CTRL 0x1A
#define DP83620_PHY_REG_VAR_DAT 0x1B
#define DP83620_PHY_REG_LQMR 0x1D
#define DP83620_PHY_REG_LQDR 0x1E
#define DP83620_PHY_REG_LQMR2 0x1F
//Extended registers (page 5)
#define DP83620_PHY_REG_PSF_CFG 0x18
//BMCR register
#define BMCR_RESET (1 << 15)
#define BMCR_LOOPBACK (1 << 14)
#define BMCR_SPEED_SEL (1 << 13)
#define BMCR_AN_EN (1 << 12)
#define BMCR_POWER_DOWN (1 << 11)
#define BMCR_ISOLATE (1 << 10)
#define BMCR_RESTART_AN (1 << 9)
#define BMCR_DUPLEX_MODE (1 << 8)
#define BMCR_COL_TEST (1 << 7)
#define BMCR_UNIDIRECTIONAL_EN (1 << 5)
//BMSR register
#define BMSR_100BT4 (1 << 15)
#define BMSR_100BTX_FD (1 << 14)
#define BMSR_100BTX (1 << 13)
#define BMSR_10BT_FD (1 << 12)
#define BMSR_10BT (1 << 11)
#define BMSR_UNIDIRECTIONAL_ABLE (1 << 7)
#define BMSR_NO_PREAMBLE (1 << 6)
#define BMSR_AN_COMPLETE (1 << 5)
#define BMSR_REMOTE_FAULT (1 << 4)
#define BMSR_AN_ABLE (1 << 3)
#define BMSR_LINK_STATUS (1 << 2)
#define BMSR_JABBER_DETECT (1 << 1)
#define BMSR_EXTENDED_CAP (1 << 0)
//ANAR register
#define ANAR_NP (1 << 15)
#define ANAR_RF (1 << 13)
#define ANAR_ASM_DIR (1 << 11)
#define ANAR_PAUSE (1 << 10)
#define ANAR_100BT4 (1 << 9)
#define ANAR_100BTX_FD (1 << 8)
#define ANAR_100BTX (1 << 7)
#define ANAR_10BT_FD (1 << 6)
#define ANAR_10BT (1 << 5)
#define ANAR_SELECTOR4 (1 << 4)
#define ANAR_SELECTOR3 (1 << 3)
#define ANAR_SELECTOR2 (1 << 2)
#define ANAR_SELECTOR1 (1 << 1)
#define ANAR_SELECTOR0 (1 << 0)
//ANLPAR register
#define ANLPAR_NP (1 << 15)
#define ANLPAR_ACK (1 << 14)
#define ANLPAR_RF (1 << 13)
#define ANLPAR_ASM_DIR (1 << 11)
#define ANLPAR_PAUSE (1 << 10)
#define ANLPAR_100BT4 (1 << 9)
#define ANLPAR_100BTX_FD (1 << 8)
#define ANLPAR_100BTX (1 << 7)
#define ANLPAR_10BT_FD (1 << 6)
#define ANLPAR_10BT (1 << 5)
#define ANLPAR_SELECTOR4 (1 << 4)
#define ANLPAR_SELECTOR3 (1 << 3)
#define ANLPAR_SELECTOR2 (1 << 2)
#define ANLPAR_SELECTOR1 (1 << 1)
#define ANLPAR_SELECTOR0 (1 << 0)
//ANER register
#define ANER_PDF (1 << 4)
#define ANER_LP_NP_ABLE (1 << 3)
#define ANER_NP_ABLE (1 << 2)
#define ANER_PAGE_RX (1 << 1)
#define ANER_LP_AN_ABLE (1 << 0)
//ANNPTR register
#define ANNPTR_NP (1 << 15)
#define ANNPTR_MP (1 << 13)
#define ANNPTR_ACK2 (1 << 12)
#define ANNPTR_TOG_TX (1 << 11)
#define ANNPTR_CODE10 (1 << 10)
#define ANNPTR_CODE9 (1 << 9)
#define ANNPTR_CODE8 (1 << 8)
#define ANNPTR_CODE7 (1 << 7)
#define ANNPTR_CODE6 (1 << 6)
#define ANNPTR_CODE5 (1 << 5)
#define ANNPTR_CODE4 (1 << 4)
#define ANNPTR_CODE3 (1 << 3)
#define ANNPTR_CODE2 (1 << 2)
#define ANNPTR_CODE1 (1 << 1)
#define ANNPTR_CODE0 (1 << 0)
//PHYSTS register
#define PHYSTS_MDIX_MODE (1 << 14)
#define PHYSTS_RX_ERROR_LATCH (1 << 13)
#define PHYSTS_POLARITY_STATUS (1 << 12)
#define PHYSTS_FALSE_CARRIER_SENSE (1 << 11)
#define PHYSTS_SIGNAL_DETECT (1 << 10)
#define PHYSTS_DESCRAMBLER_LOCK (1 << 9)
#define PHYSTS_PAGE_RECEIVED (1 << 8)
#define PHYSTS_MII_INTERRUPT (1 << 7)
#define PHYSTS_REMOTE_FAULT (1 << 6)
#define PHYSTS_JABBER_DETECT (1 << 5)
#define PHYSTS_AN_COMPLETE (1 << 4)
#define PHYSTS_LOOPBACK_STATUS (1 << 3)
#define PHYSTS_DUPLEX_STATUS (1 << 2)
#define PHYSTS_SPEED_STATUS (1 << 1)
#define PHYSTS_LINK_STATUS (1 << 0)
//MICR register
#define MICR_TINT (1 << 2)
#define MICR_INTEN (1 << 1)
#define MICR_INT_OE (1 << 0)
//MISR register
#define MISR_ED_INT (1 << 14)
#define MISR_LINK_INT (1 << 13)
#define MISR_SPD_INT (1 << 12)
#define MISR_DUP_INT (1 << 11)
#define MISR_ANC_INT (1 << 10)
#define MISR_FHF_INT (1 << 9)
#define MISR_RHF_INT (1 << 8)
#define MISR_LQ_INT_EN (1 << 7)
#define MISR_ED_INT_EN (1 << 6)
#define MISR_LINK_INT_EN (1 << 5)
#define MISR_SPD_INT_EN (1 << 4)
#define MISR_DUP_INT_EN (1 << 3)
#define MISR_ANC_INT_EN (1 << 2)
#define MISR_FHF_INT_EN (1 << 1)
#define MISR_RHF_INT_EN (1 << 0)
//PAGESEL register
#define PAGESEL_PAGE_SEL2 (1 << 2)
#define PAGESEL_PAGE_SEL1 (1 << 1)
#define PAGESEL_PAGE_SEL0 (1 << 0)
//FCSCR register
#define FCSCR_FCSCNT7 (1 << 7)
#define FCSCR_FCSCNT6 (1 << 6)
#define FCSCR_FCSCNT5 (1 << 5)
#define FCSCR_FCSCNT4 (1 << 4)
#define FCSCR_FCSCNT3 (1 << 3)
#define FCSCR_FCSCNT2 (1 << 2)
#define FCSCR_FCSCNT1 (1 << 1)
#define FCSCR_FCSCNT0 (1 << 0)
//RECR register
#define RECR_RXERCNT7 (1 << 7)
#define RECR_RXERCNT6 (1 << 6)
#define RECR_RXERCNT5 (1 << 5)
#define RECR_RXERCNT4 (1 << 4)
#define RECR_RXERCNT3 (1 << 3)
#define RECR_RXERCNT2 (1 << 2)
#define RECR_RXERCNT1 (1 << 1)
#define RECR_RXERCNT0 (1 << 0)
//PCSR register
#define PCSR_AUTO_CROSSOVER (1 << 15)
#define PCSR_FREE_CLK (1 << 11)
#define PCSR_TQ_EN (1 << 10)
#define PCSR_SD_FORCE_PMA (1 << 9)
#define PCSR_SD_OPTION (1 << 8)
#define PCSR_DESC_TIME (1 << 7)
#define PCSR_FX_EN (1 << 6)
#define PCSR_FORCE_100_OK (1 << 5)
#define PCSR_FEFI_EN (1 << 3)
#define PCSR_NRZI_BYPASS (1 << 2)
#define PCSR_SCRAM_BYPASS (1 << 1)
#define PCSR_DESCRAM_BYPASS (1 << 0)
//RBR register
#define RBR_RMII_MASTER (1 << 14)
#define RBR_DIS_TX_OPT (1 << 13)
#define RBR_PMD_LOOP (1 << 8)
#define RBR_SCMII_RX (1 << 7)
#define RBR_SCMII_TX (1 << 6)
#define RBR_RMII_MODE (1 << 5)
#define RBR_RMII_REV1_0 (1 << 4)
#define RBR_RX_OVF_STS (1 << 3)
#define RBR_RX_UNF_STS (1 << 2)
#define RBR_ELAST_BUF1 (1 << 1)
#define RBR_ELAST_BUF0 (1 << 0)
//LEDCR register
#define LEDCR_DIS_SPDLED (1 << 11)
#define LEDCR_DIS_LNKLED (1 << 10)
#define LEDCR_DIS_ACTLED (1 << 9)
#define LEDCR_LEDACT_RX (1 << 8)
#define LEDCR_BLINK_FREQ1 (1 << 7)
#define LEDCR_BLINK_FREQ0 (1 << 6)
#define LEDCR_DRV_SPDLED (1 << 5)
#define LEDCR_DRV_LNKLED (1 << 4)
#define LEDCR_DRV_ACTLED (1 << 3)
#define LEDCR_SPDLED (1 << 2)
#define LEDCR_LNKLED (1 << 1)
#define LEDCR_ACTLED (1 << 0)
#define LEDCR_BLINK_FREQ_6HZ (0 << 6)
#define LEDCR_BLINK_FREQ_12HZ (1 << 6)
#define LEDCR_BLINK_FREQ_24HZ (2 << 6)
#define LEDCR_BLINK_FREQ_48HZ (3 << 6)
//PHYCR register
#define PHYCR_MDIX_EN (1 << 15)
#define PHYCR_FORCE_MDIX (1 << 14)
#define PHYCR_PAUSE_RX (1 << 13)
#define PHYCR_PAUSE_TX (1 << 12)
#define PHYCR_BIST_FE (1 << 11)
#define PHYCR_PSR_15 (1 << 10)
#define PHYCR_BIST_STATUS (1 << 9)
#define PHYCR_BIST_START (1 << 8)
#define PHYCR_BP_STRETCH (1 << 7)
#define PHYCR_LED_CNFG1 (1 << 6)
#define PHYCR_LED_CNFG0 (1 << 5)
#define PHYCR_PHYADDR4 (1 << 4)
#define PHYCR_PHYADDR3 (1 << 3)
#define PHYCR_PHYADDR2 (1 << 2)
#define PHYCR_PHYADDR1 (1 << 1)
#define PHYCR_PHYADDR0 (1 << 0)
//10BTSCR register
#define _10BTSCR_10BT_SERIAL (1 << 15)
#define _10BTSCR_SQUELCH2 (1 << 11)
#define _10BTSCR_SQUELCH1 (1 << 10)
#define _10BTSCR_SQUELCH0 (1 << 9)
#define _10BTSCR_LOOPBACK_10_DIS (1 << 8)
#define _10BTSCR_LP_DIS (1 << 7)
#define _10BTSCR_FORCE_LINK_10 (1 << 6)
#define _10BTSCR_POLARITY (1 << 4)
#define _10BTSCR_AUTOPOL_DIS (1 << 3)
#define _10BTSCR_10BT_SCALE_MSB (1 << 2)
#define _10BTSCR_HEARTBEAT_DIS (1 << 1)
#define _10BTSCR_JABBER_DIS (1 << 0)
//CDCTRL1 register
#define CDCTRL1_BIST_ERROR_COUNT7 (1 << 15)
#define CDCTRL1_BIST_ERROR_COUNT6 (1 << 14)
#define CDCTRL1_BIST_ERROR_COUNT5 (1 << 13)
#define CDCTRL1_BIST_ERROR_COUNT4 (1 << 12)
#define CDCTRL1_BIST_ERROR_COUNT3 (1 << 11)
#define CDCTRL1_BIST_ERROR_COUNT2 (1 << 10)
#define CDCTRL1_BIST_ERROR_COUNT1 (1 << 9)
#define CDCTRL1_BIST_ERROR_COUNT0 (1 << 8)
#define CDCTRL1_MII_CLOCK_EN (1 << 6)
#define CDCTRL1_BIST_CONT (1 << 5)
#define CDCTRL1_CDPATTEN_10 (1 << 4)
#define CDCTRL1_MDIO_PULL_EN (1 << 3)
#define CDCTRL1_PATT_GAP_10M (1 << 2)
#define CDCTRL1_CDPATTSEL1 (1 << 1)
#define CDCTRL1_CDPATTSEL0 (1 << 0)
//PHYCR2 register
#define PHYCR2_SYNC_ENET_EN (1 << 13)
#define PHYCR2_CLK_OUT RXCLK (1 << 12)
#define PHYCR2_BC_WRITE (1 << 11)
#define PHYCR2_PHYTER_COMP (1 << 10)
#define PHYCR2_SOFT_RESET (1 << 9)
#define PHYCR2_CLK_OUT_DIS (1 << 1)
//EDCR register
#define EDCR_ED_EN (1 << 15)
#define EDCR_ED_AUTO_UP (1 << 14)
#define EDCR_ED_AUTO_DOWN (1 << 13)
#define EDCR_ED_MAN (1 << 12)
#define EDCR_ED_BURST_DIS (1 << 11)
#define EDCR_ED_PWR_STATE (1 << 10)
#define EDCR_ED_ERR_MET (1 << 9)
#define EDCR_ED_DATA_MET (1 << 8)
#define EDCR_ED_ERR_COUNT3 (1 << 7)
#define EDCR_ED_ERR_COUNT2 (1 << 6)
#define EDCR_ED_ERR_COUNT1 (1 << 5)
#define EDCR_ED_ERR_COUNT0 (1 << 4)
#define EDCR_ED_DATA_COUNT3 (1 << 3)
#define EDCR_ED_DATA_COUNT2 (1 << 2)
#define EDCR_ED_DATA_COUNT1 (1 << 1)
#define EDCR_ED_DATA_COUNT0 (1 << 0)
//PCFCR register
#define PCFCR_PCF_STS_ERR (1 << 15)
#define PCFCR_PCF_STS_OK (1 << 14)
#define PCFCR_PCF_DA_SEL (1 << 8)
#define PCFCR_PCF_INT_CTL1 (1 << 7)
#define PCFCR_PCF_INT_CTL0 (1 << 6)
#define PCFCR_PCF_BC_DIS (1 << 5)
#define PCFCR_PCF_BUF3 (1 << 4)
#define PCFCR_PCF_BUF2 (1 << 3)
#define PCFCR_PCF_BUF1 (1 << 2)
#define PCFCR_PCF_BUF0 (1 << 1)
#define PCFCR_PCF_EN (1 << 0)
//SD_CNFG register
#define SD_CNFG_SD_TIME (1 << 8)
//LEN100_DET register
#define LEN100_DET_CABLE_LEN7 (1 << 7)
#define LEN100_DET_CABLE_LEN6 (1 << 6)
#define LEN100_DET_CABLE_LEN5 (1 << 5)
#define LEN100_DET_CABLE_LEN4 (1 << 4)
#define LEN100_DET_CABLE_LEN3 (1 << 3)
#define LEN100_DET_CABLE_LEN2 (1 << 2)
#define LEN100_DET_CABLE_LEN1 (1 << 1)
#define LEN100_DET_CABLE_LEN0 (1 << 0)
//FREQ100 register
#define FREQ100_SAMPLE_FREQ (1 << 15)
#define FREQ100_SEL_FC (1 << 8)
#define FREQ100_FREQ_OFFSET7 (1 << 7)
#define FREQ100_FREQ_OFFSET6 (1 << 6)
#define FREQ100_FREQ_OFFSET5 (1 << 5)
#define FREQ100_FREQ_OFFSET4 (1 << 4)
#define FREQ100_FREQ_OFFSET3 (1 << 3)
#define FREQ100_FREQ_OFFSET2 (1 << 2)
#define FREQ100_FREQ_OFFSET1 (1 << 1)
#define FREQ100_FREQ_OFFSET0 (1 << 0)
//TDR_CTRL register
#define TDR_CTRL_TDR_ENABLE (1 << 15)
#define TDR_CTRL_TDR_100MB (1 << 14)
#define TDR_CTRL_TX_CHANNEL (1 << 13)
#define TDR_CTRL_RX_CHANNEL (1 << 12)
#define TDR_CTRL_SEND_TDR (1 << 11)
#define TDR_CTRL_TDR_WIDTH2 (1 << 10)
#define TDR_CTRL_TDR_WIDTH1 (1 << 9)
#define TDR_CTRL_TDR_WIDTH0 (1 << 8)
#define TDR_CTRL_TDR_MIN_MODE (1 << 7)
#define TDR_CTRL_RX_THRESHOLD5 (1 << 5)
#define TDR_CTRL_RX_THRESHOLD4 (1 << 4)
#define TDR_CTRL_RX_THRESHOLD3 (1 << 3)
#define TDR_CTRL_RX_THRESHOLD2 (1 << 2)
#define TDR_CTRL_RX_THRESHOLD1 (1 << 1)
#define TDR_CTRL_RX_THRESHOLD0 (1 << 0)
//TDR_WIN register
#define TDR_WIN_TDR_START7 (1 << 15)
#define TDR_WIN_TDR_START6 (1 << 14)
#define TDR_WIN_TDR_START5 (1 << 13)
#define TDR_WIN_TDR_START4 (1 << 12)
#define TDR_WIN_TDR_START3 (1 << 11)
#define TDR_WIN_TDR_START2 (1 << 10)
#define TDR_WIN_TDR_START1 (1 << 9)
#define TDR_WIN_TDR_START0 (1 << 8)
#define TDR_WIN_TDR_STOP7 (1 << 7)
#define TDR_WIN_TDR_STOP6 (1 << 6)
#define TDR_WIN_TDR_STOP5 (1 << 5)
#define TDR_WIN_TDR_STOP4 (1 << 4)
#define TDR_WIN_TDR_STOP3 (1 << 3)
#define TDR_WIN_TDR_STOP2 (1 << 2)
#define TDR_WIN_TDR_STOP1 (1 << 1)
#define TDR_WIN_TDR_STOP0 (1 << 0)
//TDR_PEAK register
#define TDR_PEAK_TDR_PEAK5 (1 << 13)
#define TDR_PEAK_TDR_PEAK4 (1 << 12)
#define TDR_PEAK_TDR_PEAK3 (1 << 11)
#define TDR_PEAK_TDR_PEAK2 (1 << 10)
#define TDR_PEAK_TDR_PEAK1 (1 << 9)
#define TDR_PEAK_TDR_PEAK0 (1 << 8)
#define TDR_PEAK_TDR_PEAK_TIME7 (1 << 7)
#define TDR_PEAK_TDR_PEAK_TIME6 (1 << 6)
#define TDR_PEAK_TDR_PEAK_TIME5 (1 << 5)
#define TDR_PEAK_TDR_PEAK_TIME4 (1 << 4)
#define TDR_PEAK_TDR_PEAK_TIME3 (1 << 3)
#define TDR_PEAK_TDR_PEAK_TIME2 (1 << 2)
#define TDR_PEAK_TDR_PEAK_TIME1 (1 << 1)
#define TDR_PEAK_TDR_PEAK_TIME0 (1 << 0)
//TDR_THR register
#define TDR_THR_TDR_THR_MET (1 << 8)
#define TDR_THR_TDR_THR_TIME7 (1 << 7)
#define TDR_THR_TDR_THR_TIME6 (1 << 6)
#define TDR_THR_TDR_THR_TIME5 (1 << 5)
#define TDR_THR_TDR_THR_TIME4 (1 << 4)
#define TDR_THR_TDR_THR_TIME3 (1 << 3)
#define TDR_THR_TDR_THR_TIME2 (1 << 2)
#define TDR_THR_TDR_THR_TIME1 (1 << 1)
#define TDR_THR_TDR_THR_TIME0 (1 << 0)
//VAR_CTRL register
#define VAR_CTRL_VAR_RDY (1 << 15)
#define VAR_CTRL_VAR_FREEZE (1 << 3)
#define VAR_CTRL_VAR_TIMER1 (1 << 2)
#define VAR_CTRL_VAR_TIMER0 (1 << 1)
#define VAR_CTRL_VAR_ENABLE (1 << 0)
//LQMR register
#define LQMR_LQM_ENABLE (1 << 15)
#define LQMR_RESTART_ON_FC (1 << 14)
#define LQMR_RESTART_ON_FREQ (1 << 13)
#define LQMR_RESTART_ON_DBLW (1 << 12)
#define LQMR_RESTART_ON_DAGC (1 << 11)
#define LQMR_RESTART_ON_C1 (1 << 10)
#define LQMR_FC_HI_WARN (1 << 9)
#define LQMR_FC_LO_WARN (1 << 8)
#define LQMR_FREQ_HI_WARN (1 << 7)
#define LQMR_FREQ_LO_WARN (1 << 6)
#define LQMR_DBLW_HI_WARN (1 << 5)
#define LQMR_DBLW_LO_WARN (1 << 4)
#define LQMR_DAGC_HI_WARN (1 << 3)
#define LQMR_DAGC_LO_WARN (1 << 2)
#define LQMR_C1_HI_WARN (1 << 1)
#define LQMR_C1_LO_WARN (1 << 0)
//LQDR register
#define LQDR_SAMPLE_PARAM (1 << 13)
#define LQDR_WRITE_LQ_THR (1 << 12)
#define LQDR_LQ_PARAM_SEL2 (1 << 11)
#define LQDR_LQ_PARAM_SEL1 (1 << 10)
#define LQDR_LQ_PARAM_SEL0 (1 << 9)
#define LQDR_LQ_THR_SEL (1 << 8)
#define LQDR_LQ_THR_DATA7 (1 << 7)
#define LQDR_LQ_THR_DATA6 (1 << 6)
#define LQDR_LQ_THR_DATA5 (1 << 5)
#define LQDR_LQ_THR_DATA4 (1 << 4)
#define LQDR_LQ_THR_DATA3 (1 << 3)
#define LQDR_LQ_THR_DATA2 (1 << 2)
#define LQDR_LQ_THR_DATA1 (1 << 1)
#define LQDR_LQ_THR_DATA0 (1 << 0)
//LQMR2 register
#define LQMR2_RESTART_ON_VAR (1 << 10)
#define LQMR2_VAR_HI_WARN (1 << 1)
//PSF_CFG register
#define PSF_CFG_MAC_SRC_ADD1 (1 << 12)
#define PSF_CFG_MAC_SRC_ADD0 (1 << 11)
#define PSF_CFG_MIN_PRE2 (1 << 10)
#define PSF_CFG_MIN_PRE1 (1 << 9)
#define PSF_CFG_MIN_PRE0 (1 << 8)
#define PSF_CFG_PSF_ENDIAN (1 << 7)
#define PSF_CFG_PSF_IPV4 (1 << 6)
#define PSF_CFG_PSF_PCF_RD (1 << 5)
#define PSF_CFG_PSF_ERR_EN (1 << 4)
//DP83620 Ethernet PHY driver
extern const PhyDriver dp83620PhyDriver;
//DP83620 related functions
error_t dp83620Init(NetInterface *interface);
void dp83620Tick(NetInterface *interface);
void dp83620EnableIrq(NetInterface *interface);
void dp83620DisableIrq(NetInterface *interface);
void dp83620EventHandler(NetInterface *interface);
void dp83620WritePhyReg(NetInterface *interface, uint8_t address, uint16_t data);
uint16_t dp83620ReadPhyReg(NetInterface *interface, uint8_t address);
void dp83620DumpPhyReg(NetInterface *interface);
#endif