Rob Kluin
config changes
Fork of
nRF51822
by 
Nordic Semiconductor
Diff: TARGET_NRF5/source/nRF5xGattServer.cpp
- Revision:
- 638:c90ae1400bf2
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NRF5/source/nRF5xGattServer.cpp Wed Sep 14 14:39:43 2016 +0100
@@ -0,0 +1,543 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "nRF5xGattServer.h"
+#ifdef YOTTA_CFG_MBED_OS
+ #include "mbed-drivers/mbed.h"
+#else
+ #include "mbed.h"
+#endif
+
+#include "common/common.h"
+#include "btle/custom/custom_helper.h"
+
+#include "nRF5xn.h"
+
+/**************************************************************************/
+/*!
+ @brief Adds a new service to the GATT table on the peripheral
+
+ @returns ble_error_t
+
+ @retval BLE_ERROR_NONE
+ Everything executed properly
+
+ @section EXAMPLE
+
+ @code
+
+ @endcode
+*/
+/**************************************************************************/
+ble_error_t nRF5xGattServer::addService(GattService &service)
+{
+ /* ToDo: Make sure this service UUID doesn't already exist (?) */
+ /* ToDo: Basic validation */
+
+ /* Add the service to the nRF51 */
+ ble_uuid_t nordicUUID;
+ nordicUUID = custom_convert_to_nordic_uuid(service.getUUID());
+
+ uint16_t serviceHandle;
+ ASSERT( ERROR_NONE ==
+ sd_ble_gatts_service_add(BLE_GATTS_SRVC_TYPE_PRIMARY,
+ &nordicUUID,
+ &serviceHandle),
+ BLE_ERROR_PARAM_OUT_OF_RANGE );
+ service.setHandle(serviceHandle);
+
+ /* Add characteristics to the service */
+ for (uint8_t i = 0; i < service.getCharacteristicCount(); i++) {
+ if (characteristicCount >= BLE_TOTAL_CHARACTERISTICS) {
+ return BLE_ERROR_NO_MEM;
+ }
+ GattCharacteristic *p_char = service.getCharacteristic(i);
+
+ /* Skip any incompletely defined, read-only characteristics. */
+ if ((p_char->getValueAttribute().getValuePtr() == NULL) &&
+ (p_char->getValueAttribute().getLength() == 0) &&
+ (p_char->getProperties() == GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ)) {
+ continue;
+ }
+
+ nordicUUID = custom_convert_to_nordic_uuid(p_char->getValueAttribute().getUUID());
+
+ /* The user-description descriptor is a special case which needs to be
+ * handled at the time of adding the characteristic. The following block
+ * is meant to discover its presence. */
+ const uint8_t *userDescriptionDescriptorValuePtr = NULL;
+ uint16_t userDescriptionDescriptorValueLen = 0;
+ for (uint8_t j = 0; j < p_char->getDescriptorCount(); j++) {
+ GattAttribute *p_desc = p_char->getDescriptor(j);
+ if (p_desc->getUUID() == BLE_UUID_DESCRIPTOR_CHAR_USER_DESC) {
+ userDescriptionDescriptorValuePtr = p_desc->getValuePtr();
+ userDescriptionDescriptorValueLen = p_desc->getLength();
+ }
+ }
+
+ ASSERT ( ERROR_NONE ==
+ custom_add_in_characteristic(BLE_GATT_HANDLE_INVALID,
+ &nordicUUID,
+ p_char->getProperties(),
+ p_char->getRequiredSecurity(),
+ p_char->getValueAttribute().getValuePtr(),
+ p_char->getValueAttribute().getLength(),
+ p_char->getValueAttribute().getMaxLength(),
+ p_char->getValueAttribute().hasVariableLength(),
+ userDescriptionDescriptorValuePtr,
+ userDescriptionDescriptorValueLen,
+ p_char->isReadAuthorizationEnabled(),
+ p_char->isWriteAuthorizationEnabled(),
+ &nrfCharacteristicHandles[characteristicCount]),
+ BLE_ERROR_PARAM_OUT_OF_RANGE );
+
+ /* Update the characteristic handle */
+ p_characteristics[characteristicCount] = p_char;
+ p_char->getValueAttribute().setHandle(nrfCharacteristicHandles[characteristicCount].value_handle);
+ characteristicCount++;
+
+ /* Add optional descriptors if any */
+ for (uint8_t j = 0; j < p_char->getDescriptorCount(); j++) {
+ if (descriptorCount >= BLE_TOTAL_DESCRIPTORS) {
+ return BLE_ERROR_NO_MEM;
+ }
+
+ GattAttribute *p_desc = p_char->getDescriptor(j);
+ /* skip the user-description-descriptor here; this has already been handled when adding the characteristic (above). */
+ if (p_desc->getUUID() == BLE_UUID_DESCRIPTOR_CHAR_USER_DESC) {
+ continue;
+ }
+
+ nordicUUID = custom_convert_to_nordic_uuid(p_desc->getUUID());
+
+ ASSERT(ERROR_NONE ==
+ custom_add_in_descriptor(BLE_GATT_HANDLE_INVALID,
+ &nordicUUID,
+ p_desc->getValuePtr(),
+ p_desc->getLength(),
+ p_desc->getMaxLength(),
+ p_desc->hasVariableLength(),
+ &nrfDescriptorHandles[descriptorCount]),
+ BLE_ERROR_PARAM_OUT_OF_RANGE);
+
+ p_descriptors[descriptorCount] = p_desc;
+ p_desc->setHandle(nrfDescriptorHandles[descriptorCount]);
+ descriptorCount++;
+ }
+ }
+
+ serviceCount++;
+
+ return BLE_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads the value of a characteristic, based on the service
+ and characteristic index fields
+
+ @param[in] attributeHandle
+ The handle of the GattCharacteristic to read from
+ @param[in] buffer
+ Buffer to hold the the characteristic's value
+ (raw byte array in LSB format)
+ @param[in/out] len
+ input: Length in bytes to be read.
+ output: Total length of attribute value upon successful return.
+
+ @returns ble_error_t
+
+ @retval BLE_ERROR_NONE
+ Everything executed properly
+*/
+/**************************************************************************/
+ble_error_t nRF5xGattServer::read(GattAttribute::Handle_t attributeHandle, uint8_t buffer[], uint16_t *lengthP)
+{
+ return read(BLE_CONN_HANDLE_INVALID, attributeHandle, buffer, lengthP);
+}
+
+ble_error_t nRF5xGattServer::read(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t buffer[], uint16_t *lengthP)
+{
+ ble_gatts_value_t value = {
+ .len = *lengthP,
+ .offset = 0,
+ .p_value = buffer,
+ };
+
+ ASSERT( ERROR_NONE ==
+ sd_ble_gatts_value_get(connectionHandle, attributeHandle, &value),
+ BLE_ERROR_PARAM_OUT_OF_RANGE);
+ *lengthP = value.len;
+
+ return BLE_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Updates the value of a characteristic, based on the service
+ and characteristic index fields
+
+ @param[in] charHandle
+ The handle of the GattCharacteristic to write to
+ @param[in] buffer
+ Data to use when updating the characteristic's value
+ (raw byte array in LSB format)
+ @param[in] len
+ The number of bytes in buffer
+
+ @returns ble_error_t
+
+ @retval BLE_ERROR_NONE
+ Everything executed properly
+*/
+/**************************************************************************/
+ble_error_t nRF5xGattServer::write(GattAttribute::Handle_t attributeHandle, const uint8_t buffer[], uint16_t len, bool localOnly)
+{
+ return write(BLE_CONN_HANDLE_INVALID, attributeHandle, buffer, len, localOnly);
+}
+
+ble_error_t nRF5xGattServer::write(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, const uint8_t buffer[], uint16_t len, bool localOnly)
+{
+ ble_error_t returnValue = BLE_ERROR_NONE;
+
+ ble_gatts_value_t value = {
+ .len = len,
+ .offset = 0,
+ .p_value = const_cast<uint8_t *>(buffer),
+ };
+
+ if (localOnly) {
+ /* Only update locally regardless of notify/indicate */
+ ASSERT_INT( ERROR_NONE,
+ sd_ble_gatts_value_set(connectionHandle, attributeHandle, &value),
+ BLE_ERROR_PARAM_OUT_OF_RANGE );
+ return BLE_ERROR_NONE;
+ }
+
+ int characteristicIndex = resolveValueHandleToCharIndex(attributeHandle);
+ if ((characteristicIndex != -1) &&
+ (p_characteristics[characteristicIndex]->getProperties() & (GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY))) {
+ /* HVX update for the characteristic value */
+ ble_gatts_hvx_params_t hvx_params;
+
+ hvx_params.handle = attributeHandle;
+ hvx_params.type =
+ (p_characteristics[characteristicIndex]->getProperties() & GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY) ? BLE_GATT_HVX_NOTIFICATION : BLE_GATT_HVX_INDICATION;
+ hvx_params.offset = 0;
+ hvx_params.p_data = const_cast<uint8_t *>(buffer);
+ hvx_params.p_len = &len;
+
+ if (connectionHandle == BLE_CONN_HANDLE_INVALID) { /* use the default connection handle if the caller hasn't specified a valid connectionHandle. */
+ nRF5xGap &gap = (nRF5xGap &) nRF5xn::Instance(BLE::DEFAULT_INSTANCE).getGap();
+ connectionHandle = gap.getConnectionHandle();
+ }
+ error_t error = (error_t) sd_ble_gatts_hvx(connectionHandle, &hvx_params);
+ if (error != ERROR_NONE) {
+ switch (error) {
+ case ERROR_BLE_NO_TX_BUFFERS: /* Notifications consume application buffers. The return value can be used for resending notifications. */
+ case ERROR_BUSY:
+ returnValue = BLE_STACK_BUSY;
+ break;
+
+ case ERROR_INVALID_STATE:
+ case ERROR_BLEGATTS_SYS_ATTR_MISSING:
+ returnValue = BLE_ERROR_INVALID_STATE;
+ break;
+
+ default :
+ ASSERT_INT( ERROR_NONE,
+ sd_ble_gatts_value_set(connectionHandle, attributeHandle, &value),
+ BLE_ERROR_PARAM_OUT_OF_RANGE );
+
+ /* Notifications consume application buffers. The return value can
+ * be used for resending notifications. */
+ returnValue = BLE_STACK_BUSY;
+ break;
+ }
+ }
+ } else {
+ uint32_t err = sd_ble_gatts_value_set(connectionHandle, attributeHandle, &value);
+ switch(err) {
+ case NRF_SUCCESS:
+ returnValue = BLE_ERROR_NONE;
+ break;
+ case NRF_ERROR_INVALID_ADDR:
+ case NRF_ERROR_INVALID_PARAM:
+ returnValue = BLE_ERROR_INVALID_PARAM;
+ break;
+ case NRF_ERROR_NOT_FOUND:
+ case NRF_ERROR_DATA_SIZE:
+ case BLE_ERROR_INVALID_CONN_HANDLE:
+ case BLE_ERROR_GATTS_INVALID_ATTR_TYPE:
+ returnValue = BLE_ERROR_PARAM_OUT_OF_RANGE;
+ break;
+ case NRF_ERROR_FORBIDDEN:
+ returnValue = BLE_ERROR_OPERATION_NOT_PERMITTED;
+ break;
+ default:
+ returnValue = BLE_ERROR_UNSPECIFIED;
+ break;
+ }
+ }
+
+ return returnValue;
+}
+
+ble_error_t nRF5xGattServer::areUpdatesEnabled(const GattCharacteristic &characteristic, bool *enabledP)
+{
+ /* Forward the call with the default connection handle. */
+ nRF5xGap &gap = (nRF5xGap &) nRF5xn::Instance(BLE::DEFAULT_INSTANCE).getGap();
+ return areUpdatesEnabled(gap.getConnectionHandle(), characteristic, enabledP);
+}
+
+ble_error_t nRF5xGattServer::areUpdatesEnabled(Gap::Handle_t connectionHandle, const GattCharacteristic &characteristic, bool *enabledP)
+{
+ int characteristicIndex = resolveValueHandleToCharIndex(characteristic.getValueHandle());
+ if (characteristicIndex == -1) {
+ return BLE_ERROR_INVALID_PARAM;
+ }
+
+ /* Read the cccd value from the GATT server. */
+ GattAttribute::Handle_t cccdHandle = nrfCharacteristicHandles[characteristicIndex].cccd_handle;
+ uint16_t cccdValue;
+ uint16_t length = sizeof(cccdValue);
+ ble_error_t rc = read(connectionHandle, cccdHandle, reinterpret_cast<uint8_t *>(&cccdValue), &length);
+ if (rc != BLE_ERROR_NONE) {
+ return rc;
+ }
+ if (length != sizeof(cccdValue)) {
+ return BLE_ERROR_INVALID_STATE;
+ }
+
+ /* Check for NOTFICATION or INDICATION in CCCD. */
+ if ((cccdValue & BLE_GATT_HVX_NOTIFICATION) || (cccdValue & BLE_GATT_HVX_INDICATION)) {
+ *enabledP = true;
+ }
+
+ return BLE_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Clear nRF5xGattServer's state.
+
+ @returns ble_error_t
+
+ @retval BLE_ERROR_NONE
+ Everything executed properly
+*/
+/**************************************************************************/
+ble_error_t nRF5xGattServer::reset(void)
+{
+ /* Clear all state that is from the parent, including private members */
+ if (GattServer::reset() != BLE_ERROR_NONE) {
+ return BLE_ERROR_INVALID_STATE;
+ }
+
+ /* Clear derived class members */
+ memset(p_characteristics, 0, sizeof(p_characteristics));
+ memset(p_descriptors, 0, sizeof(p_descriptors));
+ memset(nrfCharacteristicHandles, 0, sizeof(ble_gatts_char_handles_t));
+ memset(nrfDescriptorHandles, 0, sizeof(nrfDescriptorHandles));
+ descriptorCount = 0;
+
+ return BLE_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Callback handler for events getting pushed up from the SD
+*/
+/**************************************************************************/
+void nRF5xGattServer::hwCallback(ble_evt_t *p_ble_evt)
+{
+ GattAttribute::Handle_t handle_value;
+ GattServerEvents::gattEvent_t eventType;
+ const ble_gatts_evt_t *gattsEventP = &p_ble_evt->evt.gatts_evt;
+
+ switch (p_ble_evt->header.evt_id) {
+ case BLE_GATTS_EVT_WRITE: {
+ /* There are 2 use case here: Values being updated & CCCD (indicate/notify) enabled */
+
+ /* 1.) Handle CCCD changes */
+ handle_value = gattsEventP->params.write.handle;
+ int characteristicIndex = resolveCCCDHandleToCharIndex(handle_value);
+ if ((characteristicIndex != -1) &&
+ (p_characteristics[characteristicIndex]->getProperties() &
+ (GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY))) {
+
+ uint16_t cccd_value = (gattsEventP->params.write.data[1] << 8) | gattsEventP->params.write.data[0]; /* Little Endian but M0 may be mis-aligned */
+
+ if (((p_characteristics[characteristicIndex]->getProperties() & GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE) && (cccd_value & BLE_GATT_HVX_INDICATION)) ||
+ ((p_characteristics[characteristicIndex]->getProperties() & GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY) && (cccd_value & BLE_GATT_HVX_NOTIFICATION))) {
+ eventType = GattServerEvents::GATT_EVENT_UPDATES_ENABLED;
+ } else {
+ eventType = GattServerEvents::GATT_EVENT_UPDATES_DISABLED;
+ }
+
+ handleEvent(eventType, p_characteristics[characteristicIndex]->getValueHandle());
+ return;
+ }
+
+ /* 2.) Changes to the characteristic value will be handled with other events below */
+ eventType = GattServerEvents::GATT_EVENT_DATA_WRITTEN;
+ }
+ break;
+
+ case BLE_GATTS_EVT_HVC:
+ /* Indication confirmation received */
+ eventType = GattServerEvents::GATT_EVENT_CONFIRMATION_RECEIVED;
+ handle_value = gattsEventP->params.hvc.handle;
+ break;
+
+ case BLE_EVT_TX_COMPLETE: {
+ handleDataSentEvent(p_ble_evt->evt.common_evt.params.tx_complete.count);
+ return;
+ }
+
+ case BLE_GATTS_EVT_SYS_ATTR_MISSING:
+ sd_ble_gatts_sys_attr_set(gattsEventP->conn_handle, NULL, 0, 0);
+ return;
+
+ case BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST:
+ switch (gattsEventP->params.authorize_request.type) {
+ case BLE_GATTS_AUTHORIZE_TYPE_READ:
+ eventType = GattServerEvents::GATT_EVENT_READ_AUTHORIZATION_REQ;
+ handle_value = gattsEventP->params.authorize_request.request.read.handle;
+ break;
+ case BLE_GATTS_AUTHORIZE_TYPE_WRITE:
+ eventType = GattServerEvents::GATT_EVENT_WRITE_AUTHORIZATION_REQ;
+ handle_value = gattsEventP->params.authorize_request.request.write.handle;
+ break;
+ default:
+ return;
+ }
+ break;
+
+ default:
+ return;
+ }
+
+ int characteristicIndex = resolveValueHandleToCharIndex(handle_value);
+ if (characteristicIndex == -1) {
+ return;
+ }
+
+ /* Find index (charHandle) in the pool */
+ switch (eventType) {
+ case GattServerEvents::GATT_EVENT_DATA_WRITTEN: {
+ GattWriteCallbackParams cbParams = {
+ .connHandle = gattsEventP->conn_handle,
+ .handle = handle_value,
+ .writeOp = static_cast<GattWriteCallbackParams::WriteOp_t>(gattsEventP->params.write.op),
+ .offset = gattsEventP->params.write.offset,
+ .len = gattsEventP->params.write.len,
+ .data = gattsEventP->params.write.data
+ };
+ handleDataWrittenEvent(&cbParams);
+ break;
+ }
+ case GattServerEvents::GATT_EVENT_WRITE_AUTHORIZATION_REQ: {
+ GattWriteAuthCallbackParams cbParams = {
+ .connHandle = gattsEventP->conn_handle,
+ .handle = handle_value,
+ .offset = gattsEventP->params.authorize_request.request.write.offset,
+ .len = gattsEventP->params.authorize_request.request.write.len,
+ .data = gattsEventP->params.authorize_request.request.write.data,
+ .authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS /* the callback handler must leave this member
+ * set to AUTH_CALLBACK_REPLY_SUCCESS if the client
+ * request is to proceed. */
+ };
+
+ ble_gatts_rw_authorize_reply_params_t reply = {
+ .type = BLE_GATTS_AUTHORIZE_TYPE_WRITE,
+ .params = {
+ .write = {
+ .gatt_status = p_characteristics[characteristicIndex]->authorizeWrite(&cbParams),
+ .update = 1,
+ .offset = cbParams.offset,
+ .len = cbParams.len,
+ .p_data = cbParams.data
+ }
+ }
+ };
+
+ if (reply.params.write.gatt_status != BLE_GATT_STATUS_SUCCESS)
+ {
+ reply.params.write.update = 0;
+ }
+
+ sd_ble_gatts_rw_authorize_reply(gattsEventP->conn_handle, &reply);
+
+ /*
+ * If write-authorization is enabled for a characteristic,
+ * AUTHORIZATION_REQ event (if replied with true) is *not*
+ * followed by another DATA_WRITTEN event; so we still need
+ * to invoke handleDataWritten(), much the same as we would
+ * have done if write-authorization had not been enabled.
+ */
+ if (reply.params.write.gatt_status == BLE_GATT_STATUS_SUCCESS) {
+ GattWriteCallbackParams cbParams = {
+ .connHandle = gattsEventP->conn_handle,
+ .handle = handle_value,
+ .writeOp = static_cast<GattWriteCallbackParams::WriteOp_t>(gattsEventP->params.authorize_request.request.write.op),
+ .offset = gattsEventP->params.authorize_request.request.write.offset,
+ .len = gattsEventP->params.authorize_request.request.write.len,
+ .data = gattsEventP->params.authorize_request.request.write.data,
+ };
+ handleDataWrittenEvent(&cbParams);
+ }
+ break;
+ }
+ case GattServerEvents::GATT_EVENT_READ_AUTHORIZATION_REQ: {
+ GattReadAuthCallbackParams cbParams = {
+ .connHandle = gattsEventP->conn_handle,
+ .handle = handle_value,
+ .offset = gattsEventP->params.authorize_request.request.read.offset,
+ .len = 0,
+ .data = NULL,
+ .authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS /* the callback handler must leave this member
+ * set to AUTH_CALLBACK_REPLY_SUCCESS if the client
+ * request is to proceed. */
+ };
+
+ ble_gatts_rw_authorize_reply_params_t reply = {
+ .type = BLE_GATTS_AUTHORIZE_TYPE_READ,
+ .params = {
+ .read = {
+ .gatt_status = p_characteristics[characteristicIndex]->authorizeRead(&cbParams)
+ }
+ }
+ };
+
+ if (cbParams.authorizationReply == BLE_GATT_STATUS_SUCCESS) {
+ if (cbParams.data != NULL) {
+ reply.params.read.update = 1;
+ reply.params.read.offset = cbParams.offset;
+ reply.params.read.len = cbParams.len;
+ reply.params.read.p_data = cbParams.data;
+ }
+ }
+
+ sd_ble_gatts_rw_authorize_reply(gattsEventP->conn_handle, &reply);
+ break;
+ }
+
+ default:
+ handleEvent(eventType, handle_value);
+ break;
+ }
+}