Rene Miedema
abc
Fork of
BLE_API
by 
Bluetooth Low Energy
Diff: public/GattCharacteristic.h
- Revision:
- 106:a20be740075d
- Child:
- 110:d5a824cee1d3
diff -r f29ab9f74d7e -r a20be740075d public/GattCharacteristic.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/public/GattCharacteristic.h Wed Jul 23 15:09:23 2014 +0100
@@ -0,0 +1,366 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+#ifndef __GATT_CHARACTERISTIC_H__
+#define __GATT_CHARACTERISTIC_H__
+
+#include "blecommon.h"
+#include "UUID.h"
+
+#include "ble_gatts.h"
+
+/**************************************************************************/
+/*!
+ \brief GATT characteristic
+*/
+/**************************************************************************/
+class GattCharacteristic
+{
+public:
+ enum {
+ UUID_BATTERY_LEVEL_STATE_CHAR = 0x2A1B,
+ UUID_BATTERY_POWER_STATE_CHAR = 0x2A1A,
+ UUID_REMOVABLE_CHAR = 0x2A3A,
+ UUID_SERVICE_REQUIRED_CHAR = 0x2A3B,
+ UUID_ALERT_CATEGORY_ID_CHAR = 0x2A43,
+ UUID_ALERT_CATEGORY_ID_BIT_MASK_CHAR = 0x2A42,
+ UUID_ALERT_LEVEL_CHAR = 0x2A06,
+ UUID_ALERT_NOTIFICATION_CONTROL_POINT_CHAR = 0x2A44,
+ UUID_ALERT_STATUS_CHAR = 0x2A3F,
+ UUID_BATTERY_LEVEL_CHAR = 0x2A19,
+ UUID_BLOOD_PRESSURE_FEATURE_CHAR = 0x2A49,
+ UUID_BLOOD_PRESSURE_MEASUREMENT_CHAR = 0x2A35,
+ UUID_BODY_SENSOR_LOCATION_CHAR = 0x2A38,
+ UUID_BOOT_KEYBOARD_INPUT_REPORT_CHAR = 0x2A22,
+ UUID_BOOT_KEYBOARD_OUTPUT_REPORT_CHAR = 0x2A32,
+ UUID_BOOT_MOUSE_INPUT_REPORT_CHAR = 0x2A33,
+ UUID_CURRENT_TIME_CHAR = 0x2A2B,
+ UUID_DATE_TIME_CHAR = 0x2A08,
+ UUID_DAY_DATE_TIME_CHAR = 0x2A0A,
+ UUID_DAY_OF_WEEK_CHAR = 0x2A09,
+ UUID_DST_OFFSET_CHAR = 0x2A0D,
+ UUID_EXACT_TIME_256_CHAR = 0x2A0C,
+ UUID_FIRMWARE_REVISION_STRING_CHAR = 0x2A26,
+ UUID_GLUCOSE_FEATURE_CHAR = 0x2A51,
+ UUID_GLUCOSE_MEASUREMENT_CHAR = 0x2A18,
+ UUID_GLUCOSE_MEASUREMENT_CONTEXT_CHAR = 0x2A34,
+ UUID_HARDWARE_REVISION_STRING_CHAR = 0x2A27,
+ UUID_HEART_RATE_CONTROL_POINT_CHAR = 0x2A39,
+ UUID_HEART_RATE_MEASUREMENT_CHAR = 0x2A37,
+ UUID_HID_CONTROL_POINT_CHAR = 0x2A4C,
+ UUID_HID_INFORMATION_CHAR = 0x2A4A,
+ UUID_IEEE_REGULATORY_CERTIFICATION_DATA_LIST_CHAR = 0x2A2A,
+ UUID_INTERMEDIATE_CUFF_PRESSURE_CHAR = 0x2A36,
+ UUID_INTERMEDIATE_TEMPERATURE_CHAR = 0x2A1E,
+ UUID_LOCAL_TIME_INFORMATION_CHAR = 0x2A0F,
+ UUID_MANUFACTURER_NAME_STRING_CHAR = 0x2A29,
+ UUID_MEASUREMENT_INTERVAL_CHAR = 0x2A21,
+ UUID_MODEL_NUMBER_STRING_CHAR = 0x2A24,
+ UUID_UNREAD_ALERT_CHAR = 0x2A45,
+ UUID_NEW_ALERT_CHAR = 0x2A46,
+ UUID_PNP_ID_CHAR = 0x2A50,
+ UUID_PROTOCOL_MODE_CHAR = 0x2A4E,
+ UUID_RECORD_ACCESS_CONTROL_POINT_CHAR = 0x2A52,
+ UUID_REFERENCE_TIME_INFORMATION_CHAR = 0x2A14,
+ UUID_REPORT_CHAR = 0x2A4D,
+ UUID_REPORT_MAP_CHAR = 0x2A4B,
+ UUID_RINGER_CONTROL_POINT_CHAR = 0x2A40,
+ UUID_RINGER_SETTING_CHAR = 0x2A41,
+ UUID_SCAN_INTERVAL_WINDOW_CHAR = 0x2A4F,
+ UUID_SCAN_REFRESH_CHAR = 0x2A31,
+ UUID_SERIAL_NUMBER_STRING_CHAR = 0x2A25,
+ UUID_SOFTWARE_REVISION_STRING_CHAR = 0x2A28,
+ UUID_SUPPORTED_NEW_ALERT_CATEGORY_CHAR = 0x2A47,
+ UUID_SUPPORTED_UNREAD_ALERT_CATEGORY_CHAR = 0x2A48,
+ UUID_SYSTEM_ID_CHAR = 0x2A23,
+ UUID_TEMPERATURE_MEASUREMENT_CHAR = 0x2A1C,
+ UUID_TEMPERATURE_TYPE_CHAR = 0x2A1D,
+ UUID_TIME_ACCURACY_CHAR = 0x2A12,
+ UUID_TIME_SOURCE_CHAR = 0x2A13,
+ UUID_TIME_UPDATE_CONTROL_POINT_CHAR = 0x2A16,
+ UUID_TIME_UPDATE_STATE_CHAR = 0x2A17,
+ UUID_TIME_WITH_DST_CHAR = 0x2A11,
+ UUID_TIME_ZONE_CHAR = 0x2A0E,
+ UUID_TX_POWER_LEVEL_CHAR = 0x2A07,
+ UUID_CSC_FEATURE_CHAR = 0x2A5C,
+ UUID_CSC_MEASUREMENT_CHAR = 0x2A5B,
+ UUID_RSC_FEATURE_CHAR = 0x2A54,
+ UUID_RSC_MEASUREMENT_CHAR = 0x2A53,
+ };
+
+ /**************************************************************************/
+ /*!
+ \brief Standard GATT characteristic presentation format unit types.
+ These unit types are used to decribe what the raw numeric
+ data in a characteristic actually represents.
+
+ \note See https://developer.bluetooth.org/gatt/units/Pages/default.aspx
+ */
+ /**************************************************************************/
+ typedef enum ble_gatt_unit_e {
+ BLE_GATT_UNIT_NONE = 0x2700, /**< No specified unit type */
+ BLE_GATT_UNIT_LENGTH_METRE = 0x2701, /**< Length, Metre */
+ BLE_GATT_UNIT_MASS_KILOGRAM = 0x2702, /**< Mass, Kilogram */
+ BLE_GATT_UNIT_TIME_SECOND = 0x2703, /**< Time, Second */
+ BLE_GATT_UNIT_ELECTRIC_CURRENT_AMPERE = 0x2704, /**< Electric Current, Ampere */
+ BLE_GATT_UNIT_THERMODYNAMIC_TEMPERATURE_KELVIN = 0x2705, /**< Thermodynamic Temperature, Kelvin */
+ BLE_GATT_UNIT_AMOUNT_OF_SUBSTANCE_MOLE = 0x2706, /**< Amount of Substance, Mole */
+ BLE_GATT_UNIT_LUMINOUS_INTENSITY_CANDELA = 0x2707, /**< Luminous Intensity, Candela */
+ BLE_GATT_UNIT_AREA_SQUARE_METRES = 0x2710, /**< Area, Square Metres */
+ BLE_GATT_UNIT_VOLUME_CUBIC_METRES = 0x2711, /**< Volume, Cubic Metres*/
+ BLE_GATT_UNIT_VELOCITY_METRES_PER_SECOND = 0x2712, /**< Velocity, Metres per Second*/
+ BLE_GATT_UNIT_ACCELERATION_METRES_PER_SECOND_SQUARED = 0x2713, /**< Acceleration, Metres per Second Squared */
+ BLE_GATT_UNIT_WAVENUMBER_RECIPROCAL_METRE = 0x2714, /**< Wave Number Reciprocal, Metre */
+ BLE_GATT_UNIT_DENSITY_KILOGRAM_PER_CUBIC_METRE = 0x2715, /**< Density, Kilogram per Cubic Metre */
+ BLE_GATT_UNIT_SURFACE_DENSITY_KILOGRAM_PER_SQUARE_METRE = 0x2716, /**< */
+ BLE_GATT_UNIT_SPECIFIC_VOLUME_CUBIC_METRE_PER_KILOGRAM = 0x2717, /**< */
+ BLE_GATT_UNIT_CURRENT_DENSITY_AMPERE_PER_SQUARE_METRE = 0x2718, /**< */
+ BLE_GATT_UNIT_MAGNETIC_FIELD_STRENGTH_AMPERE_PER_METRE = 0x2719, /**< Magnetic Field Strength, Ampere per Metre */
+ BLE_GATT_UNIT_AMOUNT_CONCENTRATION_MOLE_PER_CUBIC_METRE = 0x271A, /**< */
+ BLE_GATT_UNIT_MASS_CONCENTRATION_KILOGRAM_PER_CUBIC_METRE = 0x271B, /**< */
+ BLE_GATT_UNIT_LUMINANCE_CANDELA_PER_SQUARE_METRE = 0x271C, /**< */
+ BLE_GATT_UNIT_REFRACTIVE_INDEX = 0x271D, /**< */
+ BLE_GATT_UNIT_RELATIVE_PERMEABILITY = 0x271E, /**< */
+ BLE_GATT_UNIT_PLANE_ANGLE_RADIAN = 0x2720, /**< */
+ BLE_GATT_UNIT_SOLID_ANGLE_STERADIAN = 0x2721, /**< */
+ BLE_GATT_UNIT_FREQUENCY_HERTZ = 0x2722, /**< Frequency, Hertz */
+ BLE_GATT_UNIT_FORCE_NEWTON = 0x2723, /**< Force, Newton */
+ BLE_GATT_UNIT_PRESSURE_PASCAL = 0x2724, /**< Pressure, Pascal */
+ BLE_GATT_UNIT_ENERGY_JOULE = 0x2725, /**< Energy, Joule */
+ BLE_GATT_UNIT_POWER_WATT = 0x2726, /**< Power, Watt */
+ BLE_GATT_UNIT_ELECTRIC_CHARGE_COULOMB = 0x2727, /**< Electrical Charge, Coulomb */
+ BLE_GATT_UNIT_ELECTRIC_POTENTIAL_DIFFERENCE_VOLT = 0x2728, /**< Electrical Potential Difference, Voltage */
+ BLE_GATT_UNIT_CAPACITANCE_FARAD = 0x2729, /**< */
+ BLE_GATT_UNIT_ELECTRIC_RESISTANCE_OHM = 0x272A, /**< */
+ BLE_GATT_UNIT_ELECTRIC_CONDUCTANCE_SIEMENS = 0x272B, /**< */
+ BLE_GATT_UNIT_MAGNETIC_FLEX_WEBER = 0x272C, /**< */
+ BLE_GATT_UNIT_MAGNETIC_FLEX_DENSITY_TESLA = 0x272D, /**< */
+ BLE_GATT_UNIT_INDUCTANCE_HENRY = 0x272E, /**< */
+ BLE_GATT_UNIT_THERMODYNAMIC_TEMPERATURE_DEGREE_CELSIUS = 0x272F, /**< */
+ BLE_GATT_UNIT_LUMINOUS_FLUX_LUMEN = 0x2730, /**< */
+ BLE_GATT_UNIT_ILLUMINANCE_LUX = 0x2731, /**< */
+ BLE_GATT_UNIT_ACTIVITY_REFERRED_TO_A_RADIONUCLIDE_BECQUEREL = 0x2732, /**< */
+ BLE_GATT_UNIT_ABSORBED_DOSE_GRAY = 0x2733, /**< */
+ BLE_GATT_UNIT_DOSE_EQUIVALENT_SIEVERT = 0x2734, /**< */
+ BLE_GATT_UNIT_CATALYTIC_ACTIVITY_KATAL = 0x2735, /**< */
+ BLE_GATT_UNIT_DYNAMIC_VISCOSITY_PASCAL_SECOND = 0x2740, /**< */
+ BLE_GATT_UNIT_MOMENT_OF_FORCE_NEWTON_METRE = 0x2741, /**< */
+ BLE_GATT_UNIT_SURFACE_TENSION_NEWTON_PER_METRE = 0x2742, /**< */
+ BLE_GATT_UNIT_ANGULAR_VELOCITY_RADIAN_PER_SECOND = 0x2743, /**< */
+ BLE_GATT_UNIT_ANGULAR_ACCELERATION_RADIAN_PER_SECOND_SQUARED = 0x2744, /**< */
+ BLE_GATT_UNIT_HEAT_FLUX_DENSITY_WATT_PER_SQUARE_METRE = 0x2745, /**< */
+ BLE_GATT_UNIT_HEAT_CAPACITY_JOULE_PER_KELVIN = 0x2746, /**< */
+ BLE_GATT_UNIT_SPECIFIC_HEAT_CAPACITY_JOULE_PER_KILOGRAM_KELVIN = 0x2747, /**< */
+ BLE_GATT_UNIT_SPECIFIC_ENERGY_JOULE_PER_KILOGRAM = 0x2748, /**< */
+ BLE_GATT_UNIT_THERMAL_CONDUCTIVITY_WATT_PER_METRE_KELVIN = 0x2749, /**< */
+ BLE_GATT_UNIT_ENERGY_DENSITY_JOULE_PER_CUBIC_METRE = 0x274A, /**< */
+ BLE_GATT_UNIT_ELECTRIC_FIELD_STRENGTH_VOLT_PER_METRE = 0x274B, /**< */
+ BLE_GATT_UNIT_ELECTRIC_CHARGE_DENSITY_COULOMB_PER_CUBIC_METRE = 0x274C, /**< */
+ BLE_GATT_UNIT_SURFACE_CHARGE_DENSITY_COULOMB_PER_SQUARE_METRE = 0x274D, /**< */
+ BLE_GATT_UNIT_ELECTRIC_FLUX_DENSITY_COULOMB_PER_SQUARE_METRE = 0x274E, /**< */
+ BLE_GATT_UNIT_PERMITTIVITY_FARAD_PER_METRE = 0x274F, /**< */
+ BLE_GATT_UNIT_PERMEABILITY_HENRY_PER_METRE = 0x2750, /**< */
+ BLE_GATT_UNIT_MOLAR_ENERGY_JOULE_PER_MOLE = 0x2751, /**< */
+ BLE_GATT_UNIT_MOLAR_ENTROPY_JOULE_PER_MOLE_KELVIN = 0x2752, /**< */
+ BLE_GATT_UNIT_EXPOSURE_COULOMB_PER_KILOGRAM = 0x2753, /**< */
+ BLE_GATT_UNIT_ABSORBED_DOSE_RATE_GRAY_PER_SECOND = 0x2754, /**< */
+ BLE_GATT_UNIT_RADIANT_INTENSITY_WATT_PER_STERADIAN = 0x2755, /**< */
+ BLE_GATT_UNIT_RADIANCE_WATT_PER_SQUARE_METRE_STERADIAN = 0x2756, /**< */
+ BLE_GATT_UNIT_CATALYTIC_ACTIVITY_CONCENTRATION_KATAL_PER_CUBIC_METRE = 0x2757, /**< */
+ BLE_GATT_UNIT_TIME_MINUTE = 0x2760, /**< Time, Minute */
+ BLE_GATT_UNIT_TIME_HOUR = 0x2761, /**< Time, Hour */
+ BLE_GATT_UNIT_TIME_DAY = 0x2762, /**< Time, Day */
+ BLE_GATT_UNIT_PLANE_ANGLE_DEGREE = 0x2763, /**< */
+ BLE_GATT_UNIT_PLANE_ANGLE_MINUTE = 0x2764, /**< */
+ BLE_GATT_UNIT_PLANE_ANGLE_SECOND = 0x2765, /**< */
+ BLE_GATT_UNIT_AREA_HECTARE = 0x2766, /**< */
+ BLE_GATT_UNIT_VOLUME_LITRE = 0x2767, /**< */
+ BLE_GATT_UNIT_MASS_TONNE = 0x2768, /**< */
+ BLE_GATT_UNIT_PRESSURE_BAR = 0x2780, /**< Pressure, Bar */
+ BLE_GATT_UNIT_PRESSURE_MILLIMETRE_OF_MERCURY = 0x2781, /**< Pressure, Millimetre of Mercury */
+ BLE_GATT_UNIT_LENGTH_ANGSTROM = 0x2782, /**< */
+ BLE_GATT_UNIT_LENGTH_NAUTICAL_MILE = 0x2783, /**< */
+ BLE_GATT_UNIT_AREA_BARN = 0x2784, /**< */
+ BLE_GATT_UNIT_VELOCITY_KNOT = 0x2785, /**< */
+ BLE_GATT_UNIT_LOGARITHMIC_RADIO_QUANTITY_NEPER = 0x2786, /**< */
+ BLE_GATT_UNIT_LOGARITHMIC_RADIO_QUANTITY_BEL = 0x2787, /**< */
+ BLE_GATT_UNIT_LENGTH_YARD = 0x27A0, /**< Length, Yard */
+ BLE_GATT_UNIT_LENGTH_PARSEC = 0x27A1, /**< Length, Parsec */
+ BLE_GATT_UNIT_LENGTH_INCH = 0x27A2, /**< Length, Inch */
+ BLE_GATT_UNIT_LENGTH_FOOT = 0x27A3, /**< Length, Foot */
+ BLE_GATT_UNIT_LENGTH_MILE = 0x27A4, /**< Length, Mile */
+ BLE_GATT_UNIT_PRESSURE_POUND_FORCE_PER_SQUARE_INCH = 0x27A5, /**< */
+ BLE_GATT_UNIT_VELOCITY_KILOMETRE_PER_HOUR = 0x27A6, /**< Velocity, Kilometre per Hour */
+ BLE_GATT_UNIT_VELOCITY_MILE_PER_HOUR = 0x27A7, /**< Velocity, Mile per Hour */
+ BLE_GATT_UNIT_ANGULAR_VELOCITY_REVOLUTION_PER_MINUTE = 0x27A8, /**< Angular Velocity, Revolution per Minute */
+ BLE_GATT_UNIT_ENERGY_GRAM_CALORIE = 0x27A9, /**< Energy, Gram Calorie */
+ BLE_GATT_UNIT_ENERGY_KILOGRAM_CALORIE = 0x27AA, /**< Energy, Kilogram Calorie */
+ BLE_GATT_UNIT_ENERGY_KILOWATT_HOUR = 0x27AB, /**< Energy, Killowatt Hour */
+ BLE_GATT_UNIT_THERMODYNAMIC_TEMPERATURE_DEGREE_FAHRENHEIT = 0x27AC, /**< */
+ BLE_GATT_UNIT_PERCENTAGE = 0x27AD, /**< Percentage */
+ BLE_GATT_UNIT_PER_MILLE = 0x27AE, /**< */
+ BLE_GATT_UNIT_PERIOD_BEATS_PER_MINUTE = 0x27AF, /**< */
+ BLE_GATT_UNIT_ELECTRIC_CHARGE_AMPERE_HOURS = 0x27B0, /**< */
+ BLE_GATT_UNIT_MASS_DENSITY_MILLIGRAM_PER_DECILITRE = 0x27B1, /**< */
+ BLE_GATT_UNIT_MASS_DENSITY_MILLIMOLE_PER_LITRE = 0x27B2, /**< */
+ BLE_GATT_UNIT_TIME_YEAR = 0x27B3, /**< Time, Year */
+ BLE_GATT_UNIT_TIME_MONTH = 0x27B4, /**< Time, Month */
+ BLE_GATT_UNIT_CONCENTRATION_COUNT_PER_CUBIC_METRE = 0x27B5, /**< */
+ BLE_GATT_UNIT_IRRADIANCE_WATT_PER_SQUARE_METRE = 0x27B6 /**< */
+ } ble_gatt_unit_t;
+
+ /**************************************************************************/
+ /*!
+ \brief Standard GATT number types
+
+ \note See Bluetooth Specification 4.0 (Vol. 3), Part G, Section 3.3.3.5.2
+ \note See http://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml
+ */
+ /**************************************************************************/
+ typedef enum ble_gatt_format_e {
+ BLE_GATT_FORMAT_RFU = 0x00, /**< Reserved For Future Use. */
+ BLE_GATT_FORMAT_BOOLEAN = 0x01, /**< Boolean. */
+ BLE_GATT_FORMAT_2BIT = 0x02, /**< Unsigned 2-bit integer. */
+ BLE_GATT_FORMAT_NIBBLE = 0x03, /**< Unsigned 4-bit integer. */
+ BLE_GATT_FORMAT_UINT8 = 0x04, /**< Unsigned 8-bit integer. */
+ BLE_GATT_FORMAT_UINT12 = 0x05, /**< Unsigned 12-bit integer. */
+ BLE_GATT_FORMAT_UINT16 = 0x06, /**< Unsigned 16-bit integer. */
+ BLE_GATT_FORMAT_UINT24 = 0x07, /**< Unsigned 24-bit integer. */
+ BLE_GATT_FORMAT_UINT32 = 0x08, /**< Unsigned 32-bit integer. */
+ BLE_GATT_FORMAT_UINT48 = 0x09, /**< Unsigned 48-bit integer. */
+ BLE_GATT_FORMAT_UINT64 = 0x0A, /**< Unsigned 64-bit integer. */
+ BLE_GATT_FORMAT_UINT128 = 0x0B, /**< Unsigned 128-bit integer. */
+ BLE_GATT_FORMAT_SINT8 = 0x0C, /**< Signed 2-bit integer. */
+ BLE_GATT_FORMAT_SINT12 = 0x0D, /**< Signed 12-bit integer. */
+ BLE_GATT_FORMAT_SINT16 = 0x0E, /**< Signed 16-bit integer. */
+ BLE_GATT_FORMAT_SINT24 = 0x0F, /**< Signed 24-bit integer. */
+ BLE_GATT_FORMAT_SINT32 = 0x10, /**< Signed 32-bit integer. */
+ BLE_GATT_FORMAT_SINT48 = 0x11, /**< Signed 48-bit integer. */
+ BLE_GATT_FORMAT_SINT64 = 0x12, /**< Signed 64-bit integer. */
+ BLE_GATT_FORMAT_SINT128 = 0x13, /**< Signed 128-bit integer. */
+ BLE_GATT_FORMAT_FLOAT32 = 0x14, /**< IEEE-754 32-bit floating point. */
+ BLE_GATT_FORMAT_FLOAT64 = 0x15, /**< IEEE-754 64-bit floating point. */
+ BLE_GATT_FORMAT_SFLOAT = 0x16, /**< IEEE-11073 16-bit SFLOAT. */
+ BLE_GATT_FORMAT_FLOAT = 0x17, /**< IEEE-11073 32-bit FLOAT. */
+ BLE_GATT_FORMAT_DUINT16 = 0x18, /**< IEEE-20601 format. */
+ BLE_GATT_FORMAT_UTF8S = 0x19, /**< UTF-8 string. */
+ BLE_GATT_FORMAT_UTF16S = 0x1A, /**< UTF-16 string. */
+ BLE_GATT_FORMAT_STRUCT = 0x1B /**< Opaque Structure. */
+ } ble_gatt_format_t;
+
+ /**************************************************************************/
+ /*!
+ \brief Standard GATT characteritic properties
+
+ \note See Bluetooth Specification 4.0 (Vol. 3), Part G, Section 3.3.1.1
+ and Section 3.3.3.1 for Extended Properties
+ */
+ /**************************************************************************/
+ typedef enum ble_gatt_char_properties_e {
+ BLE_GATT_CHAR_PROPERTIES_NONE = 0x00,
+ BLE_GATT_CHAR_PROPERTIES_BROADCAST = 0x01, /**< Permits broadcasts of the Characteristic Value using Server Characteristic Configuration Descriptor. */
+ BLE_GATT_CHAR_PROPERTIES_READ = 0x02, /**< Permits reads of the Characteristic Value. */
+ BLE_GATT_CHAR_PROPERTIES_WRITE_WITHOUT_RESPONSE = 0x04, /**< Permits writes of the Characteristic Value without response. */
+ BLE_GATT_CHAR_PROPERTIES_WRITE = 0x08, /**< Permits writes of the Characteristic Value with response. */
+ BLE_GATT_CHAR_PROPERTIES_NOTIFY = 0x10, /**< Permits notifications of a Characteristic Value without acknowledgement. */
+ BLE_GATT_CHAR_PROPERTIES_INDICATE = 0x20, /**< Permits indications of a Characteristic Value with acknowledgement. */
+ BLE_GATT_CHAR_PROPERTIES_AUTHENTICATED_SIGNED_WRITES = 0x40, /**< Permits signed writes to the Characteristic Value. */
+ BLE_GATT_CHAR_PROPERTIES_EXTENDED_PROPERTIES = 0x80 /**< Additional characteristic properties are defined in the Characteristic Extended Properties Descriptor */
+ } ble_gatt_char_properties_t;
+
+ /**************************************************************************/
+ /*!
+ \brief GATT presentation format wrapper
+
+ \note See Bluetooth Specification 4.0 (Vol. 3), Part G, Section 3.3.3.5
+ \note See https://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml
+ */
+ /**************************************************************************/
+ typedef struct PresentationFormat {
+ uint8_t gatt_format; /**< Format of the value, see @ref ble_gatt_format_t. */
+ int8_t exponent; /**< Exponent for integer data types. Ex. if Exponent = -3 and the char value is 3892, the actual value is 3.892 */
+ uint16_t gatt_unit; /**< UUID from Bluetooth Assigned Numbers, see @ref ble_gatt_unit_t. */
+ uint8_t gatt_namespace; /**< Namespace from Bluetooth Assigned Numbers, normally '1', see @ref BLE_GATT_CPF_NAMESPACES. */
+ uint16_t gatt_nsdesc; /**< Namespace description from Bluetooth Assigned Numbers, normally '0', see @ref BLE_GATT_CPF_NAMESPACES. */
+ } presentation_format_t;
+
+ /**
+ * @brief Creates a new GattCharacteristic using the specified 16-bit
+ * UUID, value length, and properties
+ *
+ * @note The UUID value must be unique in the service and is normally >1
+ *
+ * @param[in] uuid
+ * The UUID to use for this characteristic
+ * @param[in] valuePtr
+ * The memory holding the initial value.
+ * @param[in] initialLen
+ * The min length in bytes of this characteristic's value
+ * @param[in] maxLen
+ * The max length in bytes of this characteristic's value
+ * @param[in] props
+ * The 8-bit bit field containing the characteristic's properties
+ *
+ * @section EXAMPLE
+ *
+ * @code
+ *
+ * // UUID = 0x2A19, Min length 2, Max len = 2, Properties = write
+ * GattCharacteristic c = GattCharacteristic( 0x2A19, 2, 2, BLE_GATT_CHAR_PROPERTIES_WRITE );
+ *
+ * @endcode
+ */
+ /**************************************************************************/
+ GattCharacteristic(const UUID &uuid, uint8_t *valuePtr = NULL, uint16_t initialLen = 0, uint16_t maxLen = 0,
+ uint8_t props = BLE_GATT_CHAR_PROPERTIES_NONE) :
+ _uuid(uuid), _valuePtr(valuePtr), _initialLen(initialLen), _lenMax(maxLen), _handle(), _properties(props) {
+ /* empty */
+ }
+
+public:
+ uint16_t getHandle(void) const {
+ return _handle;
+ }
+ void setHandle(uint16_t id) {
+ _handle = id;
+ }
+ const UUID &getUUID(void) const {
+ return _uuid;
+ }
+ uint8_t getProperties(void) const {
+ return _properties;
+ }
+ uint16_t getInitialLength(void) const {
+ return _initialLen;
+ }
+ uint16_t getMaxLength(void) const {
+ return _lenMax;
+ }
+ uint8_t *getValuePtr(void) {
+ return _valuePtr;
+ }
+
+private:
+ UUID _uuid; /* Characteristic UUID */
+ uint8_t *_valuePtr;
+ uint16_t _initialLen; /* Initial length of the value */
+ uint16_t _lenMax; /* Maximum length of the value */
+ uint16_t _handle;
+ uint8_t _properties;
+};
+
+#endif // ifndef __GATT_CHARACTERISTIC_H__