Rene Miedema
abc
Fork of
BLE_API
by 
Bluetooth Low Energy
Diff: services/UARTService.h
- Revision:
- 118:620d28e7a1ba
- Child:
- 134:49321f76753e
diff -r 0fb20195102b -r 620d28e7a1ba services/UARTService.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/services/UARTService.h Mon Sep 22 10:59:09 2014 +0100
@@ -0,0 +1,203 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __BLE_UART_SERVICE_H__
+#define __BLE_UART_SERVICE_H__
+
+#include "Stream.h"
+
+#include "UUID.h"
+#include "BLEDevice.h"
+
+extern const uint8_t UARTServiceBaseUUID[LENGTH_OF_LONG_UUID];
+extern const uint16_t UARTServiceShortUUID;
+extern const uint16_t UARTServiceTXCharacteristicShortUUID;
+extern const uint16_t UARTServiceRXCharacteristicShortUUID;
+
+extern const uint8_t UARTServiceUUID[LENGTH_OF_LONG_UUID];
+extern const uint8_t UARTServiceUUID_reversed[LENGTH_OF_LONG_UUID];
+
+extern const uint8_t UARTServiceTXCharacteristicUUID[LENGTH_OF_LONG_UUID];
+extern const uint8_t UARTServiceRXCharacteristicUUID[LENGTH_OF_LONG_UUID];
+
+class UARTService : public Stream {
+public:
+ /**< Maximum length of data (in bytes) that can be transmitted by the UART service module to the peer. */
+ static const unsigned GATT_MTU_SIZE_DEFAULT = 23;
+ static const unsigned BLE_UART_SERVICE_MAX_DATA_LEN = (GATT_MTU_SIZE_DEFAULT - 3);
+
+public:
+ UARTService(BLEDevice &_ble) :
+ Stream("blueart"),
+ ble(_ble),
+ receiveBuffer(),
+ sendBuffer(),
+ sendBufferIndex(0),
+ numBytesReceived(0),
+ receiveBufferIndex(0),
+ txCharacteristic(UARTServiceTXCharacteristicUUID, receiveBuffer, 1, BLE_UART_SERVICE_MAX_DATA_LEN,
+ GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE_WITHOUT_RESPONSE),
+ rxCharacteristic(UARTServiceRXCharacteristicUUID, sendBuffer, 1, BLE_UART_SERVICE_MAX_DATA_LEN, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY) {
+ GattCharacteristic *charTable[] = {&txCharacteristic, &rxCharacteristic};
+ GattService uartService(UARTServiceUUID, charTable, sizeof(charTable) / sizeof(GattCharacteristic *));
+
+ ble.addService(uartService);
+ ble.onDataWritten(this, &UARTService::onDataWritten);
+ }
+
+ /**
+ * Note: TX and RX characteristics are to be interpreted from the viewpoint of the GATT client using this service.
+ */
+ uint16_t getTXCharacteristicHandle() {
+ return txCharacteristic.getValueAttribute().getHandle();
+ }
+
+ /**
+ * Note: TX and RX characteristics are to be interpreted from the viewpoint of the GATT client using this service.
+ */
+ uint16_t getRXCharacteristicHandle() {
+ return rxCharacteristic.getValueAttribute().getHandle();
+ }
+
+ /**
+ * Following a call to this function, all writes to stdout (such as from
+ * printf) get redirected to the outbound characteristic of this service.
+ * This might be very useful when wanting to receive debug messages over BLE.
+ *
+ * @Note: debug messages originating from printf() like calls are buffered
+ * before being sent out. A '\n' in the printf() triggers the buffer update
+ * to the underlying characteristic.
+ *
+ * @Note: long messages need to be chopped up into 20-byte updates so that
+ * they flow out completely with notifications. The receiver should be
+ * prepared to stitch these messages back.
+ */
+ void retargetStdout() {
+ freopen("/blueart", "w", stdout);
+ }
+
+ /**
+ * This callback allows the UART service to receive updates to the
+ * txCharacteristic. The application should forward the call to this
+ * function from the global onDataWritten() callback handler; or if that's
+ * not used, this method can be used as a callback directly.
+ */
+ virtual void onDataWritten(const GattCharacteristicWriteCBParams *params) {
+ if (params->charHandle == getTXCharacteristicHandle()) {
+ uint16_t bytesRead = params->len;
+ if (bytesRead <= BLE_UART_SERVICE_MAX_DATA_LEN) {
+ numBytesReceived = bytesRead;
+ receiveBufferIndex = 0;
+ memcpy(receiveBuffer, params->data, numBytesReceived);
+ }
+ }
+ }
+
+protected:
+ /**
+ * Override for Stream::write().
+ *
+ * We attempt to collect bytes before pushing them to the UART RX
+ * characteristic--writing to the RX characteristic will then generate
+ * notifications for the client. Updates made in quick succession to a
+ * notification-generating characteristic will result in data being buffered
+ * in the bluetooth stack as notifications are sent out. The stack will have
+ * its limits for this buffering; typically a small number under 10.
+ * Collecting data into the sendBuffer buffer helps mitigate the rate of
+ * updates. But we shouldn't buffer a large amount of data before updating
+ * the characteristic otherwise the client will need to turn around and make
+ * a long read request; this is because notifications include only the first
+ * 20 bytes of the updated data.
+ *
+ * @param buffer The received update
+ * @param length Amount of characters to be appended.
+ * @return Amount of characters appended to the rxCharacteristic.
+ */
+ virtual ssize_t write(const void* _buffer, size_t length) {
+ size_t origLength = length;
+ const uint8_t *buffer = static_cast<const uint8_t *>(_buffer);
+
+ if (ble.getGapState().connected) {
+ unsigned bufferIndex = 0;
+ while (length) {
+ unsigned bytesRemainingInSendBuffer = BLE_UART_SERVICE_MAX_DATA_LEN - sendBufferIndex;
+ unsigned bytesToCopy = (length < bytesRemainingInSendBuffer) ? length : bytesRemainingInSendBuffer;
+
+ /* copy bytes into sendBuffer */
+ memcpy(&sendBuffer[sendBufferIndex], &buffer[bufferIndex], bytesToCopy);
+ length -= bytesToCopy;
+ sendBufferIndex += bytesToCopy;
+ bufferIndex += bytesToCopy;
+
+ /* have we collected enough? */
+ if ((sendBufferIndex == BLE_UART_SERVICE_MAX_DATA_LEN) ||
+ // (sendBuffer[sendBufferIndex - 1] == '\r') ||
+ (sendBuffer[sendBufferIndex - 1] == '\n')) {
+ ble.updateCharacteristicValue(getRXCharacteristicHandle(), static_cast<const uint8_t *>(sendBuffer), sendBufferIndex);
+ sendBufferIndex = 0;
+ }
+ }
+ }
+
+ return origLength;
+ }
+
+ /**
+ * Override for Stream::_putc()
+ * @param c
+ * This function writes the character c, cast to an unsigned char, to stream.
+ * @return
+ * The character written as an unsigned char cast to an int or EOF on error.
+ */
+ virtual int _putc(int c) {
+ return (write(&c, 1) == 1) ? 1 : EOF;
+ }
+
+ virtual int _getc() {
+ if (receiveBufferIndex == numBytesReceived) {
+ return EOF;
+ }
+
+ return receiveBuffer[receiveBufferIndex++];
+ }
+
+ virtual int isatty() {
+ return 1;
+ }
+
+private:
+ BLEDevice &ble;
+
+ uint8_t receiveBuffer[BLE_UART_SERVICE_MAX_DATA_LEN]; /**< The local buffer into which we receive
+ * inbound data before forwarding it to the
+ * application. */
+
+ uint8_t sendBuffer[BLE_UART_SERVICE_MAX_DATA_LEN]; /**< The local buffer into which outbound data is
+ * accumulated before being pushed to the
+ * rxCharacteristic. */
+ uint8_t sendBufferIndex;
+ uint8_t numBytesReceived;
+ uint8_t receiveBufferIndex;
+
+ GattCharacteristic txCharacteristic; /**< From the point of view of the external client, this is the characteristic
+ * they'd write into in order to communicate with this application. */
+ GattCharacteristic rxCharacteristic; /**< From the point of view of the external client, this is the characteristic
+ * they'd read from in order to receive the bytes transmitted by this
+ * application. */
+};
+
+#endif /* #ifndef __BLE_UART_SERVICE_H__*/
+