Rene Miedema / ble_test

abc

Fork of BLE_API by Bluetooth Low Energy

public/BLEDevice.h@359:611485c370f5, 2015-05-08 (annotated)

Committer:
rgrover1
Date:
Fri May 08 15:35:47 2015 +0100
Revision:
359:611485c370f5
Parent:
358:6a3536a141f3
Child:
362:3b1ff00ad8a4
Synchronized with git rev 624b7a6c

Author: Rohit Grover

handle securityProcedureCompleted

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 257:7a50601356cc 1 /* mbed Microcontroller Library
rgrover1 257:7a50601356cc 2 * Copyright (c) 2006-2013 ARM Limited
rgrover1 257:7a50601356cc 3 *
rgrover1 257:7a50601356cc 4 * Licensed under the Apache License, Version 2.0 (the "License");
rgrover1 257:7a50601356cc 5 * you may not use this file except in compliance with the License.
rgrover1 257:7a50601356cc 6 * You may obtain a copy of the License at
rgrover1 257:7a50601356cc 7 *
rgrover1 257:7a50601356cc 8 * http://www.apache.org/licenses/LICENSE-2.0
rgrover1 257:7a50601356cc 9 *
rgrover1 257:7a50601356cc 10 * Unless required by applicable law or agreed to in writing, software
rgrover1 257:7a50601356cc 11 * distributed under the License is distributed on an "AS IS" BASIS,
rgrover1 257:7a50601356cc 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1 257:7a50601356cc 13 * See the License for the specific language governing permissions and
rgrover1 257:7a50601356cc 14 * limitations under the License.
rgrover1 257:7a50601356cc 15 */
rgrover1 257:7a50601356cc 16
rgrover1 257:7a50601356cc 17 #ifndef __BLE_DEVICE__
rgrover1 257:7a50601356cc 18 #define __BLE_DEVICE__
rgrover1 257:7a50601356cc 19
rgrover1 257:7a50601356cc 20 #include "blecommon.h"
rgrover1 257:7a50601356cc 21 #include "Gap.h"
rgrover1 257:7a50601356cc 22 #include "GattServer.h"
rgrover1 257:7a50601356cc 23 #include "BLEDeviceInstanceBase.h"
rgrover1 257:7a50601356cc 24
rgrover1 257:7a50601356cc 25 /**
rgrover1 257:7a50601356cc 26 * The base class used to abstract away BLE capable radio transceivers or SOCs,
rgrover1 257:7a50601356cc 27 * to enable this BLE API to work with any radio transparently.
rgrover1 257:7a50601356cc 28 */
rgrover1 257:7a50601356cc 29 class BLEDevice
rgrover1 257:7a50601356cc 30 {
rgrover1 257:7a50601356cc 31 public:
rgrover1 257:7a50601356cc 32 /**
rgrover1 257:7a50601356cc 33 * Initialize the BLE controller. This should be called before using
rgrover1 257:7a50601356cc 34 * anything else in the BLE_API.
rgrover1 257:7a50601356cc 35 */
rgrover1 257:7a50601356cc 36 ble_error_t init();
rgrover1 257:7a50601356cc 37 ble_error_t reset(void);
rgrover1 257:7a50601356cc 38
rgrover1 257:7a50601356cc 39 /**
rgrover1 257:7a50601356cc 40 * Purge the BLE stack of GATT and GAP state. init() must be called afterwards to re-instate services and GAP state.
rgrover1 257:7a50601356cc 41 */
rgrover1 257:7a50601356cc 42 ble_error_t shutdown(void);
rgrover1 257:7a50601356cc 43
rgrover1 257:7a50601356cc 44 /* GAP specific APIs */
rgrover1 257:7a50601356cc 45 public:
rgrover1 257:7a50601356cc 46 /**
rgrover1 257:7a50601356cc 47 * Set the BTLE MAC address and type.
rgrover1 257:7a50601356cc 48 * @return BLE_ERROR_NONE on success.
rgrover1 257:7a50601356cc 49 */
rgrover1 257:7a50601356cc 50 ble_error_t setAddress(Gap::addr_type_t type, const Gap::address_t address);
rgrover1 257:7a50601356cc 51
rgrover1 257:7a50601356cc 52 /**
rgrover1 257:7a50601356cc 53 * Fetch the BTLE MAC address and type.
rgrover1 257:7a50601356cc 54 * @return BLE_ERROR_NONE on success.
rgrover1 257:7a50601356cc 55 */
rgrover1 257:7a50601356cc 56 ble_error_t getAddress(Gap::addr_type_t *typeP, Gap::address_t address);
rgrover1 257:7a50601356cc 57
rgrover1 257:7a50601356cc 58 /**
rgrover1 257:7a50601356cc 59 * @param[in] advType
rgrover1 257:7a50601356cc 60 * The GAP advertising mode to use for this device. Valid
rgrover1 257:7a50601356cc 61 * values are defined in AdvertisingType:
rgrover1 257:7a50601356cc 62 *
rgrover1 257:7a50601356cc 63 * \par ADV_NON_CONNECTABLE_UNDIRECTED
rgrover1 257:7a50601356cc 64 * All connections to the peripheral device will be refused.
rgrover1 257:7a50601356cc 65 *
rgrover1 257:7a50601356cc 66 * \par ADV_CONNECTABLE_DIRECTED
rgrover1 257:7a50601356cc 67 * Only connections from a pre-defined central device will be
rgrover1 257:7a50601356cc 68 * accepted.
rgrover1 257:7a50601356cc 69 *
rgrover1 257:7a50601356cc 70 * \par ADV_CONNECTABLE_UNDIRECTED
rgrover1 257:7a50601356cc 71 * Any central device can connect to this peripheral.
rgrover1 257:7a50601356cc 72 *
rgrover1 257:7a50601356cc 73 * \par ADV_SCANNABLE_UNDIRECTED
rgrover1 300:d9a39f759a6a 74 * Include support for Scan Response payloads.
rgrover1 257:7a50601356cc 75 *
rgrover1 257:7a50601356cc 76 * \par
rgrover1 257:7a50601356cc 77 * See Bluetooth Core Specification 4.0 (Vol. 3), Part C,
rgrover1 257:7a50601356cc 78 * Section 9.3 and Core Specification 4.0 (Vol. 6), Part B,
rgrover1 257:7a50601356cc 79 * Section 2.3.1 for further information on GAP connection
rgrover1 257:7a50601356cc 80 * modes
rgrover1 257:7a50601356cc 81 */
rgrover1 257:7a50601356cc 82 void setAdvertisingType(GapAdvertisingParams::AdvertisingType);
rgrover1 257:7a50601356cc 83
rgrover1 257:7a50601356cc 84 /**
rgrover1 257:7a50601356cc 85 * @param[in] interval
rgrover1 325:501ad8b8bbe5 86 * Advertising interval in units of milliseconds. Advertising
rgrover1 325:501ad8b8bbe5 87 * is disabled if interval is 0. If interval is smaller than
rgrover1 325:501ad8b8bbe5 88 * the minimum supported value, then the minimum supported
rgrover1 325:501ad8b8bbe5 89 * value is used instead.
rgrover1 257:7a50601356cc 90 *
rgrover1 257:7a50601356cc 91 * \par
rgrover1 257:7a50601356cc 92 * Decreasing this value will allow central devices to detect
rgrover1 257:7a50601356cc 93 * your peripheral faster at the expense of more power being
rgrover1 257:7a50601356cc 94 * used by the radio due to the higher data transmit rate.
rgrover1 257:7a50601356cc 95 *
rgrover1 257:7a50601356cc 96 * \par
rgrover1 257:7a50601356cc 97 * This field must be set to 0 if connectionMode is equal
rgrover1 257:7a50601356cc 98 * to ADV_CONNECTABLE_DIRECTED
rgrover1 257:7a50601356cc 99 *
rgrover1 257:7a50601356cc 100 * \par
rgrover1 257:7a50601356cc 101 * See Bluetooth Core Specification, Vol 3., Part C,
rgrover1 257:7a50601356cc 102 * Appendix A for suggested advertising intervals.
rgrover1 334:6bc1223306b9 103 *
rgrover1 334:6bc1223306b9 104 * @Note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1 334:6bc1223306b9 105 * 'interval' argument. That required an explicit conversion from
rgrover1 334:6bc1223306b9 106 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1 334:6bc1223306b9 107 * no longer required as the new units are milliseconds. Any application
rgrover1 334:6bc1223306b9 108 * code depending on the old semantics would need to be updated accordingly.
rgrover1 257:7a50601356cc 109 */
rgrover1 257:7a50601356cc 110 void setAdvertisingInterval(uint16_t interval);
rgrover1 257:7a50601356cc 111
rgrover1 257:7a50601356cc 112 /**
rgrover1 325:501ad8b8bbe5 113 * @return Minimum Advertising interval in milliseconds.
rgrover1 325:501ad8b8bbe5 114 */
rgrover1 325:501ad8b8bbe5 115 uint16_t getMinAdvertisingInterval(void) const;
rgrover1 325:501ad8b8bbe5 116 /**
rgrover1 325:501ad8b8bbe5 117 * @return Minimum Advertising interval in milliseconds for non connectible mode.
rgrover1 325:501ad8b8bbe5 118 */
rgrover1 325:501ad8b8bbe5 119 uint16_t getMinNonConnectableAdvertisingInterval(void) const;
rgrover1 325:501ad8b8bbe5 120 /**
rgrover1 325:501ad8b8bbe5 121 * @return Maximum Advertising interval in milliseconds.
rgrover1 325:501ad8b8bbe5 122 */
rgrover1 325:501ad8b8bbe5 123 uint16_t getMaxAdvertisingInterval(void) const;
rgrover1 325:501ad8b8bbe5 124
rgrover1 325:501ad8b8bbe5 125 /**
rgrover1 257:7a50601356cc 126 * @param[in] timeout
rgrover1 257:7a50601356cc 127 * Advertising timeout between 0x1 and 0x3FFF (1 and 16383)
rgrover1 257:7a50601356cc 128 * in seconds. Enter 0 to disable the advertising timeout.
rgrover1 257:7a50601356cc 129 */
rgrover1 257:7a50601356cc 130 void setAdvertisingTimeout(uint16_t timeout);
rgrover1 257:7a50601356cc 131
rgrover1 257:7a50601356cc 132 /**
rgrover1 257:7a50601356cc 133 * Please refer to the APIs above.
rgrover1 257:7a50601356cc 134 */
rgrover1 257:7a50601356cc 135 void setAdvertisingParams(const GapAdvertisingParams &advParams);
rgrover1 257:7a50601356cc 136
rgrover1 257:7a50601356cc 137 /**
rgrover1 257:7a50601356cc 138 * This API is typically used as an internal helper to udpate the transport
rgrover1 257:7a50601356cc 139 * backend with advertising data before starting to advertise. It may also
rgrover1 257:7a50601356cc 140 * be explicity used to dynamically reset the accumulated advertising
rgrover1 257:7a50601356cc 141 * payload and scanResponse; to do this, the application can clear and re-
rgrover1 257:7a50601356cc 142 * accumulate a new advertising payload (and scanResponse) before using this
rgrover1 257:7a50601356cc 143 * API.
rgrover1 257:7a50601356cc 144 */
rgrover1 257:7a50601356cc 145 ble_error_t setAdvertisingPayload(void);
rgrover1 257:7a50601356cc 146
rgrover1 257:7a50601356cc 147 /**
rgrover1 257:7a50601356cc 148 * Reset any advertising payload prepared from prior calls to
rgrover1 257:7a50601356cc 149 * accumulateAdvertisingPayload().
rgrover1 343:4d2576324b62 150 *
rgrover1 343:4d2576324b62 151 * Note: This should be followed by a call to setAdvertisingPayload() or
rgrover1 343:4d2576324b62 152 * startAdvertising() before the update takes effect.
rgrover1 257:7a50601356cc 153 */
rgrover1 257:7a50601356cc 154 void clearAdvertisingPayload(void);
rgrover1 257:7a50601356cc 155
rgrover1 257:7a50601356cc 156 /**
rgrover1 257:7a50601356cc 157 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 257:7a50601356cc 158 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 257:7a50601356cc 159 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 257:7a50601356cc 160 * small.
rgrover1 257:7a50601356cc 161 *
rgrover1 257:7a50601356cc 162 * @param flags
rgrover1 257:7a50601356cc 163 * The flags to be added. Multiple flags may be specified in
rgrover1 257:7a50601356cc 164 * combination.
rgrover1 257:7a50601356cc 165 */
rgrover1 257:7a50601356cc 166 ble_error_t accumulateAdvertisingPayload(uint8_t flags);
rgrover1 257:7a50601356cc 167
rgrover1 257:7a50601356cc 168 /**
rgrover1 257:7a50601356cc 169 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 257:7a50601356cc 170 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 257:7a50601356cc 171 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 257:7a50601356cc 172 * small.
rgrover1 257:7a50601356cc 173 *
rgrover1 257:7a50601356cc 174 * @param app
rgrover1 257:7a50601356cc 175 * The appearance of the peripheral.
rgrover1 257:7a50601356cc 176 */
rgrover1 257:7a50601356cc 177 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app);
rgrover1 257:7a50601356cc 178
rgrover1 257:7a50601356cc 179 /**
rgrover1 257:7a50601356cc 180 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 257:7a50601356cc 181 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 257:7a50601356cc 182 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 257:7a50601356cc 183 * small.
rgrover1 257:7a50601356cc 184 *
rgrover1 257:7a50601356cc 185 * @param app
rgrover1 257:7a50601356cc 186 * The max transmit power to be used by the controller. This is
rgrover1 257:7a50601356cc 187 * only a hint.
rgrover1 257:7a50601356cc 188 */
rgrover1 257:7a50601356cc 189 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power);
rgrover1 257:7a50601356cc 190
rgrover1 257:7a50601356cc 191 /**
rgrover1 257:7a50601356cc 192 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 257:7a50601356cc 193 * advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1 257:7a50601356cc 194 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
rgrover1 257:7a50601356cc 195 * advertising payload proves to be too small.
rgrover1 257:7a50601356cc 196 *
rgrover1 257:7a50601356cc 197 * @param type The type which describes the variable length data.
rgrover1 257:7a50601356cc 198 * @param data data bytes.
rgrover1 257:7a50601356cc 199 * @param len length of data.
rgrover1 257:7a50601356cc 200 */
rgrover1 257:7a50601356cc 201 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len);
rgrover1 257:7a50601356cc 202
rgrover1 257:7a50601356cc 203 /**
rgrover1 257:7a50601356cc 204 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 257:7a50601356cc 205 * scanResponse payload.
rgrover1 257:7a50601356cc 206 *
rgrover1 257:7a50601356cc 207 * @param type The type which describes the variable length data.
rgrover1 257:7a50601356cc 208 * @param data data bytes.
rgrover1 257:7a50601356cc 209 * @param len length of data.
rgrover1 257:7a50601356cc 210 */
rgrover1 257:7a50601356cc 211 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len);
rgrover1 257:7a50601356cc 212
rgrover1 257:7a50601356cc 213 /**
rgrover1 343:4d2576324b62 214 * Reset any scan response prepared from prior calls to
rgrover1 343:4d2576324b62 215 * accumulateScanResponse().
rgrover1 343:4d2576324b62 216 *
rgrover1 343:4d2576324b62 217 * Note: This should be followed by a call to setAdvertisingPayload() or
rgrover1 343:4d2576324b62 218 * startAdvertising() before the update takes effect.
rgrover1 343:4d2576324b62 219 */
rgrover1 343:4d2576324b62 220 void clearScanResponse(void);
rgrover1 343:4d2576324b62 221
rgrover1 343:4d2576324b62 222 /**
rgrover1 257:7a50601356cc 223 * Start advertising (GAP Discoverable, Connectable modes, Broadcast
rgrover1 257:7a50601356cc 224 * Procedure).
rgrover1 257:7a50601356cc 225 */
rgrover1 257:7a50601356cc 226 ble_error_t startAdvertising(void);
rgrover1 257:7a50601356cc 227
rgrover1 257:7a50601356cc 228 /**
rgrover1 257:7a50601356cc 229 * Stop advertising (GAP Discoverable, Connectable modes, Broadcast
rgrover1 257:7a50601356cc 230 * Procedure).
rgrover1 257:7a50601356cc 231 */
rgrover1 257:7a50601356cc 232 ble_error_t stopAdvertising(void);
rgrover1 257:7a50601356cc 233
rgrover1 335:dea9e14b7ddc 234 /**
rgrover1 335:dea9e14b7ddc 235 * This call initiates the disconnection procedure, and its completion will
rgrover1 335:dea9e14b7ddc 236 * be communicated to the application with an invocation of the
rgrover1 335:dea9e14b7ddc 237 * onDisconnection callback.
rgrover1 335:dea9e14b7ddc 238 *
rgrover1 335:dea9e14b7ddc 239 * @param reason
rgrover1 335:dea9e14b7ddc 240 * The reason for disconnection to be sent back to the peer.
rgrover1 335:dea9e14b7ddc 241 */
rgrover1 257:7a50601356cc 242 ble_error_t disconnect(Gap::DisconnectionReason_t reason);
rgrover1 257:7a50601356cc 243
rgrover1 257:7a50601356cc 244 /* APIs to set GAP callbacks. */
rgrover1 257:7a50601356cc 245 void onTimeout(Gap::EventCallback_t timeoutCallback);
rgrover1 257:7a50601356cc 246
rgrover1 257:7a50601356cc 247 void onConnection(Gap::ConnectionEventCallback_t connectionCallback);
rgrover1 257:7a50601356cc 248 /**
rgrover1 257:7a50601356cc 249 * Used to setup a callback for GAP disconnection.
rgrover1 257:7a50601356cc 250 */
rgrover1 257:7a50601356cc 251 void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback);
rgrover1 257:7a50601356cc 252
rgrover1 257:7a50601356cc 253 /**
rgrover1 257:7a50601356cc 254 * Append to a chain of callbacks to be invoked upon disconnection; these
rgrover1 257:7a50601356cc 255 * callbacks receive no context and are therefore different from the
rgrover1 257:7a50601356cc 256 * onDisconnection callback.
rgrover1 257:7a50601356cc 257 */
rgrover1 257:7a50601356cc 258 template<typename T>
rgrover1 257:7a50601356cc 259 void addToDisconnectionCallChain(T *tptr, void (T::*mptr)(void));
rgrover1 257:7a50601356cc 260
rgrover1 257:7a50601356cc 261 /**
rgrover1 261:b275bfc773b9 262 * Add a callback for the GATT event DATA_SENT (which is triggered when
rgrover1 261:b275bfc773b9 263 * updates are sent out by GATT in the form of notifications).
rgrover1 259:a95264ad705c 264 *
rgrover1 259:a95264ad705c 265 * @Note: it is possible to chain together multiple onDataSent callbacks
rgrover1 259:a95264ad705c 266 * (potentially from different modules of an application) to receive updates
rgrover1 260:ea7f9f14cc15 267 * to characteristics.
rgrover1 259:a95264ad705c 268 *
rgrover1 259:a95264ad705c 269 * @Note: it is also possible to setup a callback into a member function of
rgrover1 259:a95264ad705c 270 * some object.
rgrover1 257:7a50601356cc 271 */
rgrover1 259:a95264ad705c 272 void onDataSent(void (*callback)(unsigned count));
rgrover1 259:a95264ad705c 273 template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count));
rgrover1 257:7a50601356cc 274
rgrover1 257:7a50601356cc 275 /**
rgrover1 257:7a50601356cc 276 * Setup a callback for when a characteristic has its value updated by a
rgrover1 257:7a50601356cc 277 * client.
rgrover1 257:7a50601356cc 278 *
rgrover1 257:7a50601356cc 279 * @Note: it is possible to chain together multiple onDataWritten callbacks
rgrover1 257:7a50601356cc 280 * (potentially from different modules of an application) to receive updates
rgrover1 257:7a50601356cc 281 * to characteristics. Many services, such as DFU and UART add their own
rgrover1 257:7a50601356cc 282 * onDataWritten callbacks behind the scenes to trap interesting events.
rgrover1 257:7a50601356cc 283 *
rgrover1 257:7a50601356cc 284 * @Note: it is also possible to setup a callback into a member function of
rgrover1 257:7a50601356cc 285 * some object.
rgrover1 257:7a50601356cc 286 */
rgrover1 257:7a50601356cc 287 void onDataWritten(void (*callback)(const GattCharacteristicWriteCBParams *eventDataP));
rgrover1 257:7a50601356cc 288 template <typename T> void onDataWritten(T * objPtr, void (T::*memberPtr)(const GattCharacteristicWriteCBParams *context));
rgrover1 257:7a50601356cc 289
rgrover1 300:d9a39f759a6a 290 /**
rgrover1 300:d9a39f759a6a 291 * Setup a callback for when a characteristic is being read by a client.
rgrover1 300:d9a39f759a6a 292 *
rgrover1 300:d9a39f759a6a 293 * @Note: this functionality may not be available on all underlying stacks.
rgrover1 300:d9a39f759a6a 294 * You could use GattCharacteristic::setReadAuthorizationCallback() as an
rgrover1 300:d9a39f759a6a 295 * alternative.
rgrover1 300:d9a39f759a6a 296 *
rgrover1 300:d9a39f759a6a 297 * @Note: it is possible to chain together multiple onDataRead callbacks
rgrover1 300:d9a39f759a6a 298 * (potentially from different modules of an application) to receive updates
rgrover1 300:d9a39f759a6a 299 * to characteristics. Services may add their own onDataRead callbacks
rgrover1 300:d9a39f759a6a 300 * behind the scenes to trap interesting events.
rgrover1 300:d9a39f759a6a 301 *
rgrover1 300:d9a39f759a6a 302 * @Note: it is also possible to setup a callback into a member function of
rgrover1 300:d9a39f759a6a 303 * some object.
rgrover1 300:d9a39f759a6a 304 *
rgrover1 300:d9a39f759a6a 305 * @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
rgrover1 300:d9a39f759a6a 306 * else BLE_ERROR_NONE.
rgrover1 300:d9a39f759a6a 307 */
rgrover1 300:d9a39f759a6a 308 ble_error_t onDataRead(void (*callback)(const GattCharacteristicReadCBParams *eventDataP));
rgrover1 300:d9a39f759a6a 309 template <typename T> ble_error_t onDataRead(T * objPtr, void (T::*memberPtr)(const GattCharacteristicReadCBParams *context));
rgrover1 300:d9a39f759a6a 310
rgrover1 257:7a50601356cc 311 void onUpdatesEnabled(GattServer::EventCallback_t callback);
rgrover1 257:7a50601356cc 312 void onUpdatesDisabled(GattServer::EventCallback_t callback);
rgrover1 257:7a50601356cc 313 void onConfirmationReceived(GattServer::EventCallback_t callback);
rgrover1 257:7a50601356cc 314
rgrover1 257:7a50601356cc 315 /**
rgrover1 341:8a104d9d80c1 316 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 341:8a104d9d80c1 317 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 341:8a104d9d80c1 318 * radio is in use. The signal is sent using software interrupt.
rgrover1 341:8a104d9d80c1 319 *
rgrover1 341:8a104d9d80c1 320 * The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
rgrover1 341:8a104d9d80c1 321 * signal is sent at the end of the Radio Event. These signals can be used
rgrover1 341:8a104d9d80c1 322 * by the application programmer to synchronize application logic with radio
rgrover1 341:8a104d9d80c1 323 * activity. For example, the ACTIVE signal can be used to shut off external
rgrover1 341:8a104d9d80c1 324 * devices to manage peak current drawn during periods when the radio is on,
rgrover1 341:8a104d9d80c1 325 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 341:8a104d9d80c1 326 *
rgrover1 341:8a104d9d80c1 327 * @param callback
rgrover1 341:8a104d9d80c1 328 * The application handler to be invoked in response to a radio
rgrover1 341:8a104d9d80c1 329 * ACTIVE/INACTIVE event.
rgrover1 341:8a104d9d80c1 330 */
rgrover1 341:8a104d9d80c1 331 void onRadioNotification(Gap::RadioNotificationEventCallback_t callback);
rgrover1 341:8a104d9d80c1 332
rgrover1 341:8a104d9d80c1 333 /**
rgrover1 349:b8b2b3973c47 334 * Setup a callback for when the security procedure for a link has started.
rgrover1 349:b8b2b3973c47 335 */
rgrover1 358:6a3536a141f3 336 void onSecurityProcedureInitiated(Gap::SecurityProcedureInitiatedCallback_t callback);
rgrover1 349:b8b2b3973c47 337
rgrover1 349:b8b2b3973c47 338 /**
rgrover1 349:b8b2b3973c47 339 * Setup a callback for when the security procedure for a link has
rgrover1 349:b8b2b3973c47 340 * completed.
rgrover1 349:b8b2b3973c47 341 */
rgrover1 359:611485c370f5 342 void onSecurityProcedureCompleted(Gap::SecurityProcedureCompletedCallback_t callback);
rgrover1 349:b8b2b3973c47 343
rgrover1 349:b8b2b3973c47 344 /**
rgrover1 349:b8b2b3973c47 345 * Setup a callback for when a link with the peer is secured. For bonded
rgrover1 349:b8b2b3973c47 346 * devices, subsequent reconnections with bonded peer will result only in
rgrover1 349:b8b2b3973c47 347 * this callback when the link is secured and setup procedures will not
rgrover1 349:b8b2b3973c47 348 * occur unless the bonding information is either lost or deleted on either
rgrover1 349:b8b2b3973c47 349 * or both sides.
rgrover1 349:b8b2b3973c47 350 */
rgrover1 356:261c251c6936 351 void onLinkSecured(Gap::HandleSpecificEvent_t callback);
rgrover1 349:b8b2b3973c47 352
rgrover1 349:b8b2b3973c47 353 /**
rgrover1 349:b8b2b3973c47 354 * Setup a callback for bonding; i.e. that link-specific security context
rgrover1 349:b8b2b3973c47 355 * is stored persistently for a peer device.
rgrover1 349:b8b2b3973c47 356 */
rgrover1 356:261c251c6936 357 void onSecurityContextStored(Gap::HandleSpecificEvent_t callback);
rgrover1 349:b8b2b3973c47 358
rgrover1 349:b8b2b3973c47 359 /**
rgrover1 353:5ed63cda3038 360 * Get the security status of a connection.
rgrover1 353:5ed63cda3038 361 *
rgrover1 353:5ed63cda3038 362 * @param[in] connectionHandle Handle to identify the connection.
rgrover1 353:5ed63cda3038 363 * @param[out] securityStatusP security status.
rgrover1 353:5ed63cda3038 364 *
rgrover1 353:5ed63cda3038 365 * @return BLE_SUCCESS Or appropriate error code indicating reason for failure.
rgrover1 353:5ed63cda3038 366 */
rgrover1 353:5ed63cda3038 367 ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, Gap::LinkSecurityStatus_t *securityStatusP);
rgrover1 353:5ed63cda3038 368
rgrover1 353:5ed63cda3038 369 /**
rgrover1 353:5ed63cda3038 370 * Delete all peer device context and all related bonding information from
rgrover1 353:5ed63cda3038 371 * the database within the security manager.
rgrover1 353:5ed63cda3038 372 *
rgrover1 353:5ed63cda3038 373 * @retval BLE_ERROR_NONE On success, else an error code indicating reason for failure.
rgrover1 353:5ed63cda3038 374 * @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization and/or
rgrover1 353:5ed63cda3038 375 * application registration.
rgrover1 353:5ed63cda3038 376 */
rgrover1 353:5ed63cda3038 377 ble_error_t purgeAllBondingState(void);
rgrover1 353:5ed63cda3038 378
rgrover1 353:5ed63cda3038 379 /**
rgrover1 257:7a50601356cc 380 * Add a service declaration to the local server ATT table. Also add the
rgrover1 257:7a50601356cc 381 * characteristics contained within.
rgrover1 257:7a50601356cc 382 */
rgrover1 257:7a50601356cc 383 ble_error_t addService(GattService &service);
rgrover1 257:7a50601356cc 384
rgrover1 336:896e159d3af6 385 /**
rgrover1 336:896e159d3af6 386 * Returns the current GAP state of the device using a bitmask which
rgrover1 336:896e159d3af6 387 * describes whether the device is advertising and/or connected.
rgrover1 336:896e159d3af6 388 */
rgrover1 257:7a50601356cc 389 Gap::GapState_t getGapState(void) const;
rgrover1 257:7a50601356cc 390
rgrover1 257:7a50601356cc 391 /**
rgrover1 257:7a50601356cc 392 * @param[in/out] lengthP
rgrover1 257:7a50601356cc 393 * input: Length in bytes to be read,
rgrover1 257:7a50601356cc 394 * output: Total length of attribute value upon successful return.
rgrover1 257:7a50601356cc 395 */
rgrover1 328:1fd12f67ed7a 396 ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP);
rgrover1 342:152bd9c825d6 397 /**
rgrover1 342:152bd9c825d6 398 * A version of the same as above with connection handle parameter to allow fetches for connection-specific multivalued attribtues (such as the CCCDs).
rgrover1 342:152bd9c825d6 399 */
rgrover1 342:152bd9c825d6 400 ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP);
rgrover1 257:7a50601356cc 401
rgrover1 257:7a50601356cc 402 /**
rgrover1 257:7a50601356cc 403 * @param localOnly
rgrover1 257:7a50601356cc 404 * Only update the characteristic locally regardless of notify/indicate flags in the CCCD.
rgrover1 257:7a50601356cc 405 */
rgrover1 328:1fd12f67ed7a 406 ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle, const uint8_t *value, uint16_t size, bool localOnly = false);
rgrover1 342:152bd9c825d6 407 /**
rgrover1 342:152bd9c825d6 408 * A version of the same as above with connection handle parameter to allow updates for connection-specific multivalued attribtues (such as the CCCDs).
rgrover1 342:152bd9c825d6 409 */
rgrover1 342:152bd9c825d6 410 ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, const uint8_t *value, uint16_t size, bool localOnly = false);
rgrover1 257:7a50601356cc 411
rgrover1 257:7a50601356cc 412 /**
rgrover1 257:7a50601356cc 413 * Yield control to the BLE stack or to other tasks waiting for events. This
rgrover1 257:7a50601356cc 414 * is a sleep function which will return when there is an application
rgrover1 257:7a50601356cc 415 * specific interrupt, but the MCU might wake up several times before
rgrover1 257:7a50601356cc 416 * returning (to service the stack). This is not always interchangeable with
rgrover1 257:7a50601356cc 417 * WFE().
rgrover1 257:7a50601356cc 418 */
rgrover1 257:7a50601356cc 419 void waitForEvent(void);
rgrover1 257:7a50601356cc 420
rgrover1 257:7a50601356cc 421 ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params);
rgrover1 257:7a50601356cc 422 ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params);
rgrover1 257:7a50601356cc 423 ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params);
rgrover1 257:7a50601356cc 424
rgrover1 257:7a50601356cc 425 /**
rgrover1 257:7a50601356cc 426 * This call allows the application to get the BLE stack version information.
rgrover1 257:7a50601356cc 427 *
rgrover1 257:7a50601356cc 428 * @return A pointer to a const string representing the version.
rgrover1 257:7a50601356cc 429 * Note: The string is owned by the BLE_API.
rgrover1 257:7a50601356cc 430 */
rgrover1 257:7a50601356cc 431 const char *getVersion(void);
rgrover1 257:7a50601356cc 432
rgrover1 257:7a50601356cc 433 /**
rgrover1 257:7a50601356cc 434 * Set the device name characteristic in the GAP service.
rgrover1 257:7a50601356cc 435 * @param deviceName The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1 257:7a50601356cc 436 */
rgrover1 257:7a50601356cc 437 ble_error_t setDeviceName(const uint8_t *deviceName);
rgrover1 257:7a50601356cc 438
rgrover1 257:7a50601356cc 439 /**
rgrover1 257:7a50601356cc 440 * Get the value of the device name characteristic in the GAP service.
rgrover1 257:7a50601356cc 441 * @param[out] deviceName Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1 257:7a50601356cc 442 * terminated* string will be placed. Set this
rgrover1 257:7a50601356cc 443 * value to NULL in order to obtain the deviceName-length
rgrover1 257:7a50601356cc 444 * from the 'length' parameter.
rgrover1 257:7a50601356cc 445 *
rgrover1 257:7a50601356cc 446 * @param[in/out] lengthP (on input) Length of the buffer pointed to by deviceName;
rgrover1 257:7a50601356cc 447 * (on output) the complete device name length (without the
rgrover1 257:7a50601356cc 448 * null terminator).
rgrover1 257:7a50601356cc 449 *
rgrover1 257:7a50601356cc 450 * @note If the device name is longer than the size of the supplied buffer,
rgrover1 257:7a50601356cc 451 * length will return the complete device name length,
rgrover1 257:7a50601356cc 452 * and not the number of bytes actually returned in deviceName.
rgrover1 257:7a50601356cc 453 * The application may use this information to retry with a suitable buffer size.
rgrover1 257:7a50601356cc 454 *
rgrover1 257:7a50601356cc 455 * Sample use:
rgrover1 257:7a50601356cc 456 * uint8_t deviceName[20];
rgrover1 257:7a50601356cc 457 * unsigned length = sizeof(deviceName);
rgrover1 257:7a50601356cc 458 * ble.getDeviceName(deviceName, &length);
rgrover1 257:7a50601356cc 459 * if (length < sizeof(deviceName)) {
rgrover1 257:7a50601356cc 460 * deviceName[length] = 0;
rgrover1 257:7a50601356cc 461 * }
rgrover1 257:7a50601356cc 462 * DEBUG("length: %u, deviceName: %s\r\n", length, deviceName);
rgrover1 257:7a50601356cc 463 */
rgrover1 257:7a50601356cc 464 ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP);
rgrover1 257:7a50601356cc 465
rgrover1 257:7a50601356cc 466 /**
rgrover1 257:7a50601356cc 467 * Set the appearance characteristic in the GAP service.
rgrover1 257:7a50601356cc 468 * @param[in] appearance The new value for the device-appearance.
rgrover1 257:7a50601356cc 469 */
rgrover1 257:7a50601356cc 470 ble_error_t setAppearance(uint16_t appearance);
rgrover1 257:7a50601356cc 471
rgrover1 257:7a50601356cc 472 /**
rgrover1 257:7a50601356cc 473 * Set the appearance characteristic in the GAP service.
rgrover1 257:7a50601356cc 474 * @param[out] appearance The new value for the device-appearance.
rgrover1 257:7a50601356cc 475 */
rgrover1 257:7a50601356cc 476 ble_error_t getAppearance(uint16_t *appearanceP);
rgrover1 257:7a50601356cc 477
rgrover1 257:7a50601356cc 478 /**
rgrover1 257:7a50601356cc 479 * Set the radio's transmit power.
rgrover1 257:7a50601356cc 480 * @param[in] txPower Radio transmit power in dBm.
rgrover1 257:7a50601356cc 481 */
rgrover1 257:7a50601356cc 482 ble_error_t setTxPower(int8_t txPower);
rgrover1 257:7a50601356cc 483
rgrover1 305:71367f7cd078 484 /**
rgrover1 305:71367f7cd078 485 * Query the underlying stack for permitted arguments for setTxPower().
rgrover1 305:71367f7cd078 486 *
rgrover1 305:71367f7cd078 487 * @param[out] valueArrayPP
rgrover1 305:71367f7cd078 488 * Out parameter to receive the immutable array of Tx values.
rgrover1 305:71367f7cd078 489 * @param[out] countP
rgrover1 305:71367f7cd078 490 * Out parameter to receive the array's size.
rgrover1 305:71367f7cd078 491 */
rgrover1 305:71367f7cd078 492 void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP);
rgrover1 305:71367f7cd078 493
rgrover1 347:20be4234c6fe 494 /**
rgrover1 347:20be4234c6fe 495 * Enable the BLE stack's Security Manager. The Security Manager implements
rgrover1 347:20be4234c6fe 496 * the actual cryptographic algorithms and protocol exchanges that allow two
rgrover1 347:20be4234c6fe 497 * devices to securely exchange data and privately detect each other.
rgrover1 347:20be4234c6fe 498 * Calling this API is a prerequisite for encryption and pairing (bonding).
rgrover1 357:d4bb5d2b837a 499 *
rgrover1 357:d4bb5d2b837a 500 * @param[in] enableBonding Allow for bonding.
rgrover1 357:d4bb5d2b837a 501 * @param[in] requireMITM Require protection for man-in-the-middle attacks.
rgrover1 357:d4bb5d2b837a 502 * @param[in] iocaps To specify IO capabilities of this peripheral,
rgrover1 357:d4bb5d2b837a 503 * such as availability of a display or keyboard to
rgrover1 357:d4bb5d2b837a 504 * support out-of-band exchanges of security data.
rgrover1 357:d4bb5d2b837a 505 * @param[in] passkey To specify a static passkey.
rgrover1 357:d4bb5d2b837a 506 *
rgrover1 357:d4bb5d2b837a 507 * @return BLE_ERROR_NONE on success.
rgrover1 347:20be4234c6fe 508 */
rgrover1 357:d4bb5d2b837a 509 ble_error_t initializeSecurity(bool enableBonding = true,
rgrover1 357:d4bb5d2b837a 510 bool requireMITM = true,
rgrover1 357:d4bb5d2b837a 511 Gap::SecurityIOCapabilities_t iocaps = Gap::IO_CAPS_NONE,
rgrover1 357:d4bb5d2b837a 512 const Gap::Passkey_t passkey = NULL);
rgrover1 347:20be4234c6fe 513
rgrover1 257:7a50601356cc 514 public:
rgrover1 257:7a50601356cc 515 BLEDevice() : transport(createBLEDeviceInstance()), advParams(), advPayload(), scanResponse(), needToSetAdvPayload(true) {
rgrover1 257:7a50601356cc 516 advPayload.clear();
rgrover1 257:7a50601356cc 517 scanResponse.clear();
rgrover1 257:7a50601356cc 518 }
rgrover1 257:7a50601356cc 519
rgrover1 257:7a50601356cc 520 private:
rgrover1 257:7a50601356cc 521 BLEDeviceInstanceBase *const transport; /* the device specific backend */
rgrover1 257:7a50601356cc 522
rgrover1 257:7a50601356cc 523 GapAdvertisingParams advParams;
rgrover1 257:7a50601356cc 524 GapAdvertisingData advPayload;
rgrover1 257:7a50601356cc 525 GapAdvertisingData scanResponse;
rgrover1 257:7a50601356cc 526
rgrover1 257:7a50601356cc 527 /* Accumulation of AD structures in the advertisement payload should
rgrover1 257:7a50601356cc 528 * eventually result in a call to the target's setAdvertisingData() before
rgrover1 257:7a50601356cc 529 * the server begins advertising. This flag marks the status of the pending update.*/
rgrover1 257:7a50601356cc 530 bool needToSetAdvPayload;
rgrover1 257:7a50601356cc 531 };
rgrover1 257:7a50601356cc 532
rgrover1 257:7a50601356cc 533 /* BLEDevice methods. Most of these simply forward the calls to the underlying
rgrover1 257:7a50601356cc 534 * transport.*/
rgrover1 257:7a50601356cc 535
rgrover1 257:7a50601356cc 536 inline ble_error_t
rgrover1 257:7a50601356cc 537 BLEDevice::reset(void)
rgrover1 257:7a50601356cc 538 {
rgrover1 257:7a50601356cc 539 return transport->reset();
rgrover1 257:7a50601356cc 540 }
rgrover1 257:7a50601356cc 541
rgrover1 257:7a50601356cc 542 inline ble_error_t
rgrover1 257:7a50601356cc 543 BLEDevice::shutdown(void)
rgrover1 257:7a50601356cc 544 {
rgrover1 257:7a50601356cc 545 clearAdvertisingPayload();
rgrover1 257:7a50601356cc 546 return transport->shutdown();
rgrover1 257:7a50601356cc 547 }
rgrover1 257:7a50601356cc 548
rgrover1 257:7a50601356cc 549 inline ble_error_t
rgrover1 257:7a50601356cc 550 BLEDevice::setAddress(Gap::addr_type_t type, const Gap::address_t address)
rgrover1 257:7a50601356cc 551 {
rgrover1 257:7a50601356cc 552 return transport->getGap().setAddress(type, address);
rgrover1 257:7a50601356cc 553 }
rgrover1 257:7a50601356cc 554
rgrover1 257:7a50601356cc 555 inline ble_error_t
rgrover1 257:7a50601356cc 556 BLEDevice::getAddress(Gap::addr_type_t *typeP, Gap::address_t address)
rgrover1 257:7a50601356cc 557 {
rgrover1 257:7a50601356cc 558 return transport->getGap().getAddress(typeP, address);
rgrover1 257:7a50601356cc 559 }
rgrover1 257:7a50601356cc 560
rgrover1 257:7a50601356cc 561 inline void
rgrover1 257:7a50601356cc 562 BLEDevice::setAdvertisingType(GapAdvertisingParams::AdvertisingType advType)
rgrover1 257:7a50601356cc 563 {
rgrover1 257:7a50601356cc 564 advParams.setAdvertisingType(advType);
rgrover1 257:7a50601356cc 565 }
rgrover1 257:7a50601356cc 566
rgrover1 257:7a50601356cc 567 inline void
rgrover1 257:7a50601356cc 568 BLEDevice::setAdvertisingInterval(uint16_t interval)
rgrover1 257:7a50601356cc 569 {
rgrover1 325:501ad8b8bbe5 570 if (interval == 0) {
rgrover1 325:501ad8b8bbe5 571 stopAdvertising();
rgrover1 325:501ad8b8bbe5 572 } else if (interval < getMinAdvertisingInterval()) {
rgrover1 325:501ad8b8bbe5 573 interval = getMinAdvertisingInterval();
rgrover1 325:501ad8b8bbe5 574 }
rgrover1 325:501ad8b8bbe5 575 advParams.setInterval(Gap::MSEC_TO_ADVERTISEMENT_DURATION_UNITS(interval));
rgrover1 325:501ad8b8bbe5 576 }
rgrover1 325:501ad8b8bbe5 577
rgrover1 325:501ad8b8bbe5 578 inline uint16_t
rgrover1 325:501ad8b8bbe5 579 BLEDevice::getMinAdvertisingInterval(void) const {
rgrover1 325:501ad8b8bbe5 580 return transport->getGap().getMinAdvertisingInterval();
rgrover1 325:501ad8b8bbe5 581 }
rgrover1 325:501ad8b8bbe5 582
rgrover1 325:501ad8b8bbe5 583 inline uint16_t
rgrover1 325:501ad8b8bbe5 584 BLEDevice::getMinNonConnectableAdvertisingInterval(void) const {
rgrover1 325:501ad8b8bbe5 585 return transport->getGap().getMinNonConnectableAdvertisingInterval();
rgrover1 325:501ad8b8bbe5 586 }
rgrover1 325:501ad8b8bbe5 587
rgrover1 325:501ad8b8bbe5 588 inline uint16_t
rgrover1 325:501ad8b8bbe5 589 BLEDevice::getMaxAdvertisingInterval(void) const {
rgrover1 325:501ad8b8bbe5 590 return transport->getGap().getMaxAdvertisingInterval();
rgrover1 257:7a50601356cc 591 }
rgrover1 257:7a50601356cc 592
rgrover1 257:7a50601356cc 593 inline void
rgrover1 257:7a50601356cc 594 BLEDevice::setAdvertisingTimeout(uint16_t timeout)
rgrover1 257:7a50601356cc 595 {
rgrover1 257:7a50601356cc 596 advParams.setTimeout(timeout);
rgrover1 257:7a50601356cc 597 }
rgrover1 257:7a50601356cc 598
rgrover1 257:7a50601356cc 599 inline void
rgrover1 257:7a50601356cc 600 BLEDevice::setAdvertisingParams(const GapAdvertisingParams &newAdvParams)
rgrover1 257:7a50601356cc 601 {
rgrover1 257:7a50601356cc 602 advParams = newAdvParams;
rgrover1 257:7a50601356cc 603 }
rgrover1 257:7a50601356cc 604
rgrover1 257:7a50601356cc 605 inline void
rgrover1 257:7a50601356cc 606 BLEDevice::clearAdvertisingPayload(void)
rgrover1 257:7a50601356cc 607 {
rgrover1 257:7a50601356cc 608 needToSetAdvPayload = true;
rgrover1 257:7a50601356cc 609 advPayload.clear();
rgrover1 257:7a50601356cc 610 }
rgrover1 257:7a50601356cc 611
rgrover1 257:7a50601356cc 612 inline ble_error_t
rgrover1 257:7a50601356cc 613 BLEDevice::accumulateAdvertisingPayload(uint8_t flags)
rgrover1 257:7a50601356cc 614 {
rgrover1 257:7a50601356cc 615 needToSetAdvPayload = true;
rgrover1 257:7a50601356cc 616 return advPayload.addFlags(flags);
rgrover1 257:7a50601356cc 617 }
rgrover1 257:7a50601356cc 618
rgrover1 257:7a50601356cc 619 inline ble_error_t
rgrover1 257:7a50601356cc 620 BLEDevice::accumulateAdvertisingPayload(GapAdvertisingData::Appearance app)
rgrover1 257:7a50601356cc 621 {
rgrover1 257:7a50601356cc 622 needToSetAdvPayload = true;
rgrover1 257:7a50601356cc 623 transport->getGap().setAppearance(app);
rgrover1 257:7a50601356cc 624 return advPayload.addAppearance(app);
rgrover1 257:7a50601356cc 625 }
rgrover1 257:7a50601356cc 626
rgrover1 257:7a50601356cc 627 inline ble_error_t
rgrover1 257:7a50601356cc 628 BLEDevice::accumulateAdvertisingPayloadTxPower(int8_t txPower)
rgrover1 257:7a50601356cc 629 {
rgrover1 257:7a50601356cc 630 needToSetAdvPayload = true;
rgrover1 257:7a50601356cc 631 return advPayload.addTxPower(txPower);
rgrover1 257:7a50601356cc 632 }
rgrover1 257:7a50601356cc 633
rgrover1 257:7a50601356cc 634 inline ble_error_t
rgrover1 257:7a50601356cc 635 BLEDevice::accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len)
rgrover1 257:7a50601356cc 636 {
rgrover1 257:7a50601356cc 637 needToSetAdvPayload = true;
rgrover1 257:7a50601356cc 638 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 257:7a50601356cc 639 transport->getGap().setDeviceName(data);
rgrover1 257:7a50601356cc 640 }
rgrover1 257:7a50601356cc 641 return advPayload.addData(type, data, len);
rgrover1 257:7a50601356cc 642 }
rgrover1 257:7a50601356cc 643
rgrover1 257:7a50601356cc 644 inline ble_error_t
rgrover1 257:7a50601356cc 645 BLEDevice::accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len)
rgrover1 257:7a50601356cc 646 {
rgrover1 257:7a50601356cc 647 needToSetAdvPayload = true;
rgrover1 257:7a50601356cc 648 return scanResponse.addData(type, data, len);
rgrover1 257:7a50601356cc 649 }
rgrover1 257:7a50601356cc 650
rgrover1 343:4d2576324b62 651 inline void
rgrover1 343:4d2576324b62 652 BLEDevice::clearScanResponse(void)
rgrover1 343:4d2576324b62 653 {
rgrover1 343:4d2576324b62 654 needToSetAdvPayload = true;
rgrover1 343:4d2576324b62 655 scanResponse.clear();
rgrover1 343:4d2576324b62 656 }
rgrover1 343:4d2576324b62 657
rgrover1 257:7a50601356cc 658 inline ble_error_t
rgrover1 257:7a50601356cc 659 BLEDevice::setAdvertisingPayload(void) {
rgrover1 257:7a50601356cc 660 needToSetAdvPayload = false;
rgrover1 257:7a50601356cc 661 return transport->getGap().setAdvertisingData(advPayload, scanResponse);
rgrover1 257:7a50601356cc 662 }
rgrover1 257:7a50601356cc 663
rgrover1 257:7a50601356cc 664 inline ble_error_t
rgrover1 257:7a50601356cc 665 BLEDevice::startAdvertising(void)
rgrover1 257:7a50601356cc 666 {
rgrover1 257:7a50601356cc 667 ble_error_t rc;
rgrover1 257:7a50601356cc 668 if ((rc = transport->getGattServer().initializeGATTDatabase()) != BLE_ERROR_NONE) {
rgrover1 257:7a50601356cc 669 return rc;
rgrover1 257:7a50601356cc 670 }
rgrover1 257:7a50601356cc 671 if (needToSetAdvPayload) {
rgrover1 257:7a50601356cc 672 if ((rc = setAdvertisingPayload()) != BLE_ERROR_NONE) {
rgrover1 257:7a50601356cc 673 return rc;
rgrover1 257:7a50601356cc 674 }
rgrover1 257:7a50601356cc 675 }
rgrover1 257:7a50601356cc 676
rgrover1 257:7a50601356cc 677 return transport->getGap().startAdvertising(advParams);
rgrover1 257:7a50601356cc 678 }
rgrover1 257:7a50601356cc 679
rgrover1 257:7a50601356cc 680 inline ble_error_t
rgrover1 257:7a50601356cc 681 BLEDevice::stopAdvertising(void)
rgrover1 257:7a50601356cc 682 {
rgrover1 257:7a50601356cc 683 return transport->getGap().stopAdvertising();
rgrover1 257:7a50601356cc 684 }
rgrover1 257:7a50601356cc 685
rgrover1 257:7a50601356cc 686 inline ble_error_t
rgrover1 257:7a50601356cc 687 BLEDevice::disconnect(Gap::DisconnectionReason_t reason)
rgrover1 257:7a50601356cc 688 {
rgrover1 257:7a50601356cc 689 return transport->getGap().disconnect(reason);
rgrover1 257:7a50601356cc 690 }
rgrover1 257:7a50601356cc 691
rgrover1 257:7a50601356cc 692 inline void
rgrover1 257:7a50601356cc 693 BLEDevice::onTimeout(Gap::EventCallback_t timeoutCallback)
rgrover1 257:7a50601356cc 694 {
rgrover1 257:7a50601356cc 695 transport->getGap().setOnTimeout(timeoutCallback);
rgrover1 257:7a50601356cc 696 }
rgrover1 257:7a50601356cc 697
rgrover1 257:7a50601356cc 698 inline void
rgrover1 257:7a50601356cc 699 BLEDevice::onConnection(Gap::ConnectionEventCallback_t connectionCallback)
rgrover1 257:7a50601356cc 700 {
rgrover1 257:7a50601356cc 701 transport->getGap().setOnConnection(connectionCallback);
rgrover1 257:7a50601356cc 702 }
rgrover1 257:7a50601356cc 703
rgrover1 257:7a50601356cc 704 inline void
rgrover1 257:7a50601356cc 705 BLEDevice::onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback)
rgrover1 257:7a50601356cc 706 {
rgrover1 257:7a50601356cc 707 transport->getGap().setOnDisconnection(disconnectionCallback);
rgrover1 257:7a50601356cc 708 }
rgrover1 257:7a50601356cc 709
rgrover1 257:7a50601356cc 710 template<typename T>
rgrover1 257:7a50601356cc 711 inline void
rgrover1 257:7a50601356cc 712 BLEDevice::addToDisconnectionCallChain(T *tptr, void (T::*mptr)(void)) {
rgrover1 257:7a50601356cc 713 transport->getGap().addToDisconnectionCallChain(tptr, mptr);
rgrover1 257:7a50601356cc 714 }
rgrover1 257:7a50601356cc 715
rgrover1 257:7a50601356cc 716 inline void
rgrover1 259:a95264ad705c 717 BLEDevice::onDataSent(void (*callback)(unsigned count)) {
rgrover1 257:7a50601356cc 718 transport->getGattServer().setOnDataSent(callback);
rgrover1 257:7a50601356cc 719 }
rgrover1 257:7a50601356cc 720
rgrover1 259:a95264ad705c 721 template <typename T> inline void
rgrover1 259:a95264ad705c 722 BLEDevice::onDataSent(T *objPtr, void (T::*memberPtr)(unsigned count)) {
rgrover1 259:a95264ad705c 723 transport->getGattServer().setOnDataSent(objPtr, memberPtr);
rgrover1 259:a95264ad705c 724 }
rgrover1 259:a95264ad705c 725
rgrover1 257:7a50601356cc 726 inline void
rgrover1 257:7a50601356cc 727 BLEDevice::onDataWritten(void (*callback)(const GattCharacteristicWriteCBParams *eventDataP)) {
rgrover1 257:7a50601356cc 728 transport->getGattServer().setOnDataWritten(callback);
rgrover1 257:7a50601356cc 729 }
rgrover1 257:7a50601356cc 730
rgrover1 257:7a50601356cc 731 template <typename T> inline void
rgrover1 257:7a50601356cc 732 BLEDevice::onDataWritten(T *objPtr, void (T::*memberPtr)(const GattCharacteristicWriteCBParams *context)) {
rgrover1 257:7a50601356cc 733 transport->getGattServer().setOnDataWritten(objPtr, memberPtr);
rgrover1 257:7a50601356cc 734 }
rgrover1 257:7a50601356cc 735
rgrover1 300:d9a39f759a6a 736 inline ble_error_t
rgrover1 300:d9a39f759a6a 737 BLEDevice::onDataRead(void (*callback)(const GattCharacteristicReadCBParams *eventDataP)) {
rgrover1 300:d9a39f759a6a 738 return transport->getGattServer().setOnDataRead(callback);
rgrover1 300:d9a39f759a6a 739 }
rgrover1 300:d9a39f759a6a 740
rgrover1 300:d9a39f759a6a 741 template <typename T> inline ble_error_t
rgrover1 300:d9a39f759a6a 742 BLEDevice::onDataRead(T *objPtr, void (T::*memberPtr)(const GattCharacteristicReadCBParams *context)) {
rgrover1 300:d9a39f759a6a 743 return transport->getGattServer().setOnDataRead(objPtr, memberPtr);
rgrover1 300:d9a39f759a6a 744 }
rgrover1 300:d9a39f759a6a 745
rgrover1 257:7a50601356cc 746 inline void
rgrover1 257:7a50601356cc 747 BLEDevice::onUpdatesEnabled(GattServer::EventCallback_t callback)
rgrover1 257:7a50601356cc 748 {
rgrover1 257:7a50601356cc 749 transport->getGattServer().setOnUpdatesEnabled(callback);
rgrover1 257:7a50601356cc 750 }
rgrover1 257:7a50601356cc 751
rgrover1 257:7a50601356cc 752 inline void
rgrover1 257:7a50601356cc 753 BLEDevice::onUpdatesDisabled(GattServer::EventCallback_t callback)
rgrover1 257:7a50601356cc 754 {
rgrover1 257:7a50601356cc 755 transport->getGattServer().setOnUpdatesDisabled(callback);
rgrover1 257:7a50601356cc 756 }
rgrover1 257:7a50601356cc 757
rgrover1 257:7a50601356cc 758 inline void
rgrover1 257:7a50601356cc 759 BLEDevice::onConfirmationReceived(GattServer::EventCallback_t callback)
rgrover1 257:7a50601356cc 760 {
rgrover1 257:7a50601356cc 761 transport->getGattServer().setOnConfirmationReceived(callback);
rgrover1 257:7a50601356cc 762 }
rgrover1 257:7a50601356cc 763
rgrover1 341:8a104d9d80c1 764 inline void
rgrover1 341:8a104d9d80c1 765 BLEDevice::onRadioNotification(Gap::RadioNotificationEventCallback_t callback)
rgrover1 341:8a104d9d80c1 766 {
rgrover1 341:8a104d9d80c1 767 transport->getGap().setOnRadioNotification(callback);
rgrover1 341:8a104d9d80c1 768 }
rgrover1 341:8a104d9d80c1 769
rgrover1 349:b8b2b3973c47 770 inline void
rgrover1 358:6a3536a141f3 771 BLEDevice::onSecurityProcedureInitiated(Gap::SecurityProcedureInitiatedCallback_t callback)
rgrover1 349:b8b2b3973c47 772 {
rgrover1 359:611485c370f5 773 transport->getGap().setOnSecurityProcedureInitiated(callback);
rgrover1 349:b8b2b3973c47 774 }
rgrover1 349:b8b2b3973c47 775
rgrover1 349:b8b2b3973c47 776 inline void
rgrover1 359:611485c370f5 777 BLEDevice::onSecurityProcedureCompleted(Gap::SecurityProcedureCompletedCallback_t callback)
rgrover1 349:b8b2b3973c47 778 {
rgrover1 359:611485c370f5 779 transport->getGap().setOnSecurityProcedureCompleted(callback);
rgrover1 349:b8b2b3973c47 780 }
rgrover1 349:b8b2b3973c47 781
rgrover1 349:b8b2b3973c47 782 inline void
rgrover1 356:261c251c6936 783 BLEDevice::onLinkSecured(Gap::HandleSpecificEvent_t callback)
rgrover1 349:b8b2b3973c47 784 {
rgrover1 349:b8b2b3973c47 785 transport->getGap().setOnLinkSecured(callback);
rgrover1 349:b8b2b3973c47 786 }
rgrover1 349:b8b2b3973c47 787
rgrover1 349:b8b2b3973c47 788 inline void
rgrover1 356:261c251c6936 789 BLEDevice::onSecurityContextStored(Gap::HandleSpecificEvent_t callback)
rgrover1 349:b8b2b3973c47 790 {
rgrover1 349:b8b2b3973c47 791 transport->getGap().setOnSecurityContextStored(callback);
rgrover1 349:b8b2b3973c47 792 }
rgrover1 349:b8b2b3973c47 793
rgrover1 257:7a50601356cc 794 inline ble_error_t
rgrover1 353:5ed63cda3038 795 BLEDevice::getLinkSecurity(Gap::Handle_t connectionHandle, Gap::LinkSecurityStatus_t *securityStatusP)
rgrover1 353:5ed63cda3038 796 {
rgrover1 353:5ed63cda3038 797 return transport->getGap().getLinkSecurity(connectionHandle, securityStatusP);
rgrover1 353:5ed63cda3038 798 }
rgrover1 353:5ed63cda3038 799
rgrover1 353:5ed63cda3038 800 inline ble_error_t
rgrover1 353:5ed63cda3038 801 BLEDevice::purgeAllBondingState(void)
rgrover1 353:5ed63cda3038 802 {
rgrover1 353:5ed63cda3038 803 return transport->getGap().purgeAllBondingState();
rgrover1 353:5ed63cda3038 804 }
rgrover1 353:5ed63cda3038 805
rgrover1 353:5ed63cda3038 806 inline ble_error_t
rgrover1 257:7a50601356cc 807 BLEDevice::addService(GattService &service)
rgrover1 257:7a50601356cc 808 {
rgrover1 257:7a50601356cc 809 return transport->getGattServer().addService(service);
rgrover1 257:7a50601356cc 810 }
rgrover1 257:7a50601356cc 811
rgrover1 257:7a50601356cc 812 inline Gap::GapState_t
rgrover1 257:7a50601356cc 813 BLEDevice::getGapState(void) const
rgrover1 257:7a50601356cc 814 {
rgrover1 257:7a50601356cc 815 return transport->getGap().getState();
rgrover1 257:7a50601356cc 816 }
rgrover1 257:7a50601356cc 817
rgrover1 328:1fd12f67ed7a 818 inline ble_error_t BLEDevice::readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP)
rgrover1 257:7a50601356cc 819 {
rgrover1 328:1fd12f67ed7a 820 return transport->getGattServer().readValue(attributeHandle, buffer, lengthP);
rgrover1 257:7a50601356cc 821 }
rgrover1 257:7a50601356cc 822
rgrover1 342:152bd9c825d6 823 inline ble_error_t BLEDevice::readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP)
rgrover1 342:152bd9c825d6 824 {
rgrover1 342:152bd9c825d6 825 return transport->getGattServer().readValue(connectionHandle, attributeHandle, buffer, lengthP);
rgrover1 342:152bd9c825d6 826 }
rgrover1 342:152bd9c825d6 827
rgrover1 257:7a50601356cc 828 inline ble_error_t
rgrover1 328:1fd12f67ed7a 829 BLEDevice::updateCharacteristicValue(GattAttribute::Handle_t attributeHandle, const uint8_t *value, uint16_t size, bool localOnly)
rgrover1 257:7a50601356cc 830 {
rgrover1 328:1fd12f67ed7a 831 return transport->getGattServer().updateValue(attributeHandle, const_cast<uint8_t *>(value), size, localOnly);
rgrover1 257:7a50601356cc 832 }
rgrover1 257:7a50601356cc 833
rgrover1 342:152bd9c825d6 834 inline ble_error_t
rgrover1 342:152bd9c825d6 835 BLEDevice::updateCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, const uint8_t *value, uint16_t size, bool localOnly)
rgrover1 342:152bd9c825d6 836 {
rgrover1 342:152bd9c825d6 837 return transport->getGattServer().updateValue(connectionHandle, attributeHandle, const_cast<uint8_t *>(value), size, localOnly);
rgrover1 342:152bd9c825d6 838 }
rgrover1 342:152bd9c825d6 839
rgrover1 257:7a50601356cc 840 inline void
rgrover1 257:7a50601356cc 841 BLEDevice::waitForEvent(void)
rgrover1 257:7a50601356cc 842 {
rgrover1 257:7a50601356cc 843 transport->waitForEvent();
rgrover1 257:7a50601356cc 844 }
rgrover1 257:7a50601356cc 845
rgrover1 257:7a50601356cc 846 inline ble_error_t
rgrover1 257:7a50601356cc 847 BLEDevice::getPreferredConnectionParams(Gap::ConnectionParams_t *params)
rgrover1 257:7a50601356cc 848 {
rgrover1 257:7a50601356cc 849 return transport->getGap().getPreferredConnectionParams(params);
rgrover1 257:7a50601356cc 850 }
rgrover1 257:7a50601356cc 851
rgrover1 257:7a50601356cc 852 inline ble_error_t
rgrover1 257:7a50601356cc 853 BLEDevice::setPreferredConnectionParams(const Gap::ConnectionParams_t *params)
rgrover1 257:7a50601356cc 854 {
rgrover1 257:7a50601356cc 855 return transport->getGap().setPreferredConnectionParams(params);
rgrover1 257:7a50601356cc 856 }
rgrover1 257:7a50601356cc 857
rgrover1 257:7a50601356cc 858 inline ble_error_t
rgrover1 257:7a50601356cc 859 BLEDevice::updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
rgrover1 257:7a50601356cc 860 return transport->getGap().updateConnectionParams(handle, params);
rgrover1 257:7a50601356cc 861 }
rgrover1 257:7a50601356cc 862
rgrover1 257:7a50601356cc 863 inline const char *
rgrover1 257:7a50601356cc 864 BLEDevice::getVersion(void)
rgrover1 257:7a50601356cc 865 {
rgrover1 257:7a50601356cc 866 return transport->getVersion();
rgrover1 257:7a50601356cc 867 }
rgrover1 257:7a50601356cc 868
rgrover1 257:7a50601356cc 869 inline ble_error_t
rgrover1 257:7a50601356cc 870 BLEDevice::setDeviceName(const uint8_t *deviceName)
rgrover1 257:7a50601356cc 871 {
rgrover1 257:7a50601356cc 872 return transport->getGap().setDeviceName(deviceName);
rgrover1 257:7a50601356cc 873 }
rgrover1 257:7a50601356cc 874
rgrover1 257:7a50601356cc 875 inline ble_error_t
rgrover1 257:7a50601356cc 876 BLEDevice::getDeviceName(uint8_t *deviceName, unsigned *lengthP)
rgrover1 257:7a50601356cc 877 {
rgrover1 257:7a50601356cc 878 return transport->getGap().getDeviceName(deviceName, lengthP);
rgrover1 257:7a50601356cc 879 }
rgrover1 257:7a50601356cc 880
rgrover1 257:7a50601356cc 881 inline ble_error_t
rgrover1 257:7a50601356cc 882 BLEDevice::setAppearance(uint16_t appearance)
rgrover1 257:7a50601356cc 883 {
rgrover1 257:7a50601356cc 884 return transport->getGap().setAppearance(appearance);
rgrover1 257:7a50601356cc 885 }
rgrover1 257:7a50601356cc 886
rgrover1 257:7a50601356cc 887 inline ble_error_t
rgrover1 257:7a50601356cc 888 BLEDevice::getAppearance(uint16_t *appearanceP)
rgrover1 257:7a50601356cc 889 {
rgrover1 257:7a50601356cc 890 return transport->getGap().getAppearance(appearanceP);
rgrover1 257:7a50601356cc 891 }
rgrover1 257:7a50601356cc 892
rgrover1 257:7a50601356cc 893 inline ble_error_t
rgrover1 257:7a50601356cc 894 BLEDevice::setTxPower(int8_t txPower)
rgrover1 257:7a50601356cc 895 {
rgrover1 257:7a50601356cc 896 return transport->setTxPower(txPower);
rgrover1 257:7a50601356cc 897 }
rgrover1 257:7a50601356cc 898
rgrover1 305:71367f7cd078 899 inline void
rgrover1 305:71367f7cd078 900 BLEDevice::getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP)
rgrover1 305:71367f7cd078 901 {
rgrover1 305:71367f7cd078 902 transport->getPermittedTxPowerValues(valueArrayPP, countP);
rgrover1 305:71367f7cd078 903 }
rgrover1 305:71367f7cd078 904
rgrover1 347:20be4234c6fe 905 inline ble_error_t
rgrover1 357:d4bb5d2b837a 906 BLEDevice::initializeSecurity(bool enableBonding,
rgrover1 357:d4bb5d2b837a 907 bool requireMITM,
rgrover1 357:d4bb5d2b837a 908 Gap::SecurityIOCapabilities_t iocaps,
rgrover1 357:d4bb5d2b837a 909 const Gap::Passkey_t passkey)
rgrover1 347:20be4234c6fe 910 {
rgrover1 357:d4bb5d2b837a 911 return transport->initializeSecurity(enableBonding, requireMITM, iocaps, passkey);
rgrover1 347:20be4234c6fe 912 }
rgrover1 347:20be4234c6fe 913
rgrover1 257:7a50601356cc 914 #endif // ifndef __BLE_DEVICE__