Emiel Estiévenart
Base station firmware
Revision 0:ecc3925d3f8c, committed 2016-05-24
- Comitter:
- Perijah
- Date:
- Tue May 24 13:16:55 2016 +0000
- Commit message:
- Base station firmware
Changed in this revision
diff -r 000000000000 -r ecc3925d3f8c USBAudio/USBAudio.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBAudio/USBAudio.cpp Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,618 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+#include "USBAudio.h"
+#include "USBAudio_Types.h"
+
+
+
+USBAudio::USBAudio(uint32_t frequency_in, uint8_t channel_nb_in, uint32_t frequency_out, uint8_t channel_nb_out, uint16_t vendor_id, uint16_t product_id, uint16_t product_release): USBDevice(vendor_id, product_id, product_release) {
+ mute = 0;
+ volCur = 0x0080;
+ volMin = 0x0000;
+ volMax = 0x0100;
+ volRes = 0x0004;
+ available = false;
+
+ FREQ_IN = frequency_in;
+ FREQ_OUT = frequency_out;
+
+ this->channel_nb_in = channel_nb_in;
+ this->channel_nb_out = channel_nb_out;
+
+ // stereo -> *2, mono -> *1
+ PACKET_SIZE_ISO_IN = (FREQ_IN / 500) * channel_nb_in;
+ PACKET_SIZE_ISO_OUT = (FREQ_OUT / 500) * channel_nb_out;
+
+ // STEREO -> left and right
+ channel_config_in = (channel_nb_in == 1) ? CHANNEL_M : CHANNEL_L + CHANNEL_R;
+ channel_config_out = (channel_nb_out == 1) ? CHANNEL_M : CHANNEL_L + CHANNEL_R;
+
+ SOF_handler = false;
+
+ buf_stream_out = NULL;
+ buf_stream_in = NULL;
+
+ interruptOUT = false;
+ writeIN = false;
+ interruptIN = false;
+ available = false;
+
+ volume = 0;
+
+ // connect the device
+ USBDevice::connect();
+}
+
+bool USBAudio::read(uint8_t * buf) {
+ buf_stream_in = buf;
+ SOF_handler = false;
+ while (!available || !SOF_handler);
+ available = false;
+ return true;
+}
+
+bool USBAudio::readNB(uint8_t * buf) {
+ buf_stream_in = buf;
+ SOF_handler = false;
+ while (!SOF_handler);
+ if (available) {
+ available = false;
+ buf_stream_in = NULL;
+ return true;
+ }
+ return false;
+}
+
+bool USBAudio::readWrite(uint8_t * buf_read, uint8_t * buf_write) {
+ buf_stream_in = buf_read;
+ SOF_handler = false;
+ writeIN = false;
+ if (interruptIN) {
+ USBDevice::writeNB(EP3IN, buf_write, PACKET_SIZE_ISO_OUT, PACKET_SIZE_ISO_OUT);
+ } else {
+ buf_stream_out = buf_write;
+ }
+ while (!available);
+ if (interruptIN) {
+ while (!writeIN);
+ }
+ while (!SOF_handler);
+ return true;
+}
+
+
+bool USBAudio::write(uint8_t * buf) {
+ writeIN = false;
+ SOF_handler = false;
+ if (interruptIN) {
+ USBDevice::writeNB(EP3IN, buf, PACKET_SIZE_ISO_OUT, PACKET_SIZE_ISO_OUT);
+ } else {
+ buf_stream_out = buf;
+ }
+ while (!SOF_handler);
+ if (interruptIN) {
+ while (!writeIN);
+ }
+ return true;
+}
+
+
+float USBAudio::getVolume() {
+ return (mute) ? 0.0 : volume;
+}
+
+
+bool USBAudio::EP3_OUT_callback() {
+ uint32_t size = 0;
+ interruptOUT = true;
+ if (buf_stream_in != NULL) {
+ readEP(EP3OUT, (uint8_t *)buf_stream_in, &size, PACKET_SIZE_ISO_IN);
+ available = true;
+ buf_stream_in = NULL;
+ }
+ readStart(EP3OUT, PACKET_SIZE_ISO_IN);
+ return false;
+}
+
+
+bool USBAudio::EP3_IN_callback() {
+ interruptIN = true;
+ writeIN = true;
+ return true;
+}
+
+
+
+// Called in ISR context on each start of frame
+void USBAudio::SOF(int frameNumber) {
+ uint32_t size = 0;
+
+ if (!interruptOUT) {
+ // read the isochronous endpoint
+ if (buf_stream_in != NULL) {
+ if (USBDevice::readEP_NB(EP3OUT, (uint8_t *)buf_stream_in, &size, PACKET_SIZE_ISO_IN)) {
+ if (size) {
+ available = true;
+ readStart(EP3OUT, PACKET_SIZE_ISO_IN);
+ buf_stream_in = NULL;
+ }
+ }
+ }
+ }
+
+ if (!interruptIN) {
+ // write if needed
+ if (buf_stream_out != NULL) {
+ USBDevice::writeNB(EP3IN, (uint8_t *)buf_stream_out, PACKET_SIZE_ISO_OUT, PACKET_SIZE_ISO_OUT);
+ buf_stream_out = NULL;
+ }
+ }
+
+ SOF_handler = true;
+}
+
+
+// Called in ISR context
+// Set configuration. Return false if the configuration is not supported.
+bool USBAudio::USBCallback_setConfiguration(uint8_t configuration) {
+ if (configuration != DEFAULT_CONFIGURATION) {
+ return false;
+ }
+
+ // Configure isochronous endpoint
+ realiseEndpoint(EP3OUT, PACKET_SIZE_ISO_IN, ISOCHRONOUS);
+ realiseEndpoint(EP3IN, PACKET_SIZE_ISO_OUT, ISOCHRONOUS);
+
+ // activate readings on this endpoint
+ readStart(EP3OUT, PACKET_SIZE_ISO_IN);
+ return true;
+}
+
+
+// Called in ISR context
+// Set alternate setting. Return false if the alternate setting is not supported
+bool USBAudio::USBCallback_setInterface(uint16_t interface, uint8_t alternate) {
+ if (interface == 0 && alternate == 0) {
+ return true;
+ }
+ if (interface == 1 && (alternate == 0 || alternate == 1)) {
+ return true;
+ }
+ if (interface == 2 && (alternate == 0 || alternate == 1)) {
+ return true;
+ }
+ return false;
+}
+
+
+
+// Called in ISR context
+// Called by USBDevice on Endpoint0 request
+// This is used to handle extensions to standard requests and class specific requests.
+// Return true if class handles this request
+bool USBAudio::USBCallback_request() {
+ bool success = false;
+ CONTROL_TRANSFER * transfer = getTransferPtr();
+
+ // Process class-specific requests
+ if (transfer->setup.bmRequestType.Type == CLASS_TYPE) {
+
+ // Feature Unit: Interface = 0, ID = 2
+ if (transfer->setup.wIndex == 0x0200) {
+
+ // Master Channel
+ if ((transfer->setup.wValue & 0xff) == 0) {
+
+ switch (transfer->setup.wValue >> 8) {
+ case MUTE_CONTROL:
+ switch (transfer->setup.bRequest) {
+ case REQUEST_GET_CUR:
+ transfer->remaining = 1;
+ transfer->ptr = &mute;
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+
+ case REQUEST_SET_CUR:
+ transfer->remaining = 1;
+ transfer->notify = true;
+ transfer->direction = HOST_TO_DEVICE;
+ success = true;
+ break;
+ default:
+ break;
+ }
+ break;
+ case VOLUME_CONTROL:
+ switch (transfer->setup.bRequest) {
+ case REQUEST_GET_CUR:
+ transfer->remaining = 2;
+ transfer->ptr = (uint8_t *)&volCur;
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case REQUEST_GET_MIN:
+ transfer->remaining = 2;
+ transfer->ptr = (uint8_t *)&volMin;
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case REQUEST_GET_MAX:
+ transfer->remaining = 2;
+ transfer->ptr = (uint8_t *)&volMax;
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case REQUEST_GET_RES:
+ transfer->remaining = 2;
+ transfer->ptr = (uint8_t *)&volRes;
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+
+ case REQUEST_SET_CUR:
+ transfer->remaining = 2;
+ transfer->notify = true;
+ transfer->direction = HOST_TO_DEVICE;
+ success = true;
+ break;
+ case REQUEST_SET_MIN:
+ transfer->remaining = 2;
+ transfer->notify = true;
+ transfer->direction = HOST_TO_DEVICE;
+ success = true;
+ break;
+ case REQUEST_SET_MAX:
+ transfer->remaining = 2;
+ transfer->notify = true;
+ transfer->direction = HOST_TO_DEVICE;
+ success = true;
+ break;
+ case REQUEST_SET_RES:
+ transfer->remaining = 2;
+ transfer->notify = true;
+ transfer->direction = HOST_TO_DEVICE;
+ success = true;
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ }
+ }
+ return success;
+}
+
+
+// Called in ISR context when a data OUT stage has been performed
+void USBAudio::USBCallback_requestCompleted(uint8_t * buf, uint32_t length) {
+ if ((length == 1) || (length == 2)) {
+ uint16_t data = (length == 1) ? *buf : *((uint16_t *)buf);
+ CONTROL_TRANSFER * transfer = getTransferPtr();
+ switch (transfer->setup.wValue >> 8) {
+ case MUTE_CONTROL:
+ switch (transfer->setup.bRequest) {
+ case REQUEST_SET_CUR:
+ mute = data & 0xff;
+ updateVol.call();
+ break;
+ default:
+ break;
+ }
+ break;
+ case VOLUME_CONTROL:
+ switch (transfer->setup.bRequest) {
+ case REQUEST_SET_CUR:
+ volCur = data;
+ volume = (float)volCur/(float)volMax;
+ updateVol.call();
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+
+
+#define TOTAL_DESCRIPTOR_LENGTH ((1 * CONFIGURATION_DESCRIPTOR_LENGTH) \
+ + (5 * INTERFACE_DESCRIPTOR_LENGTH) \
+ + (1 * CONTROL_INTERFACE_DESCRIPTOR_LENGTH + 1) \
+ + (2 * INPUT_TERMINAL_DESCRIPTOR_LENGTH) \
+ + (1 * FEATURE_UNIT_DESCRIPTOR_LENGTH) \
+ + (2 * OUTPUT_TERMINAL_DESCRIPTOR_LENGTH) \
+ + (2 * STREAMING_INTERFACE_DESCRIPTOR_LENGTH) \
+ + (2 * FORMAT_TYPE_I_DESCRIPTOR_LENGTH) \
+ + (2 * (ENDPOINT_DESCRIPTOR_LENGTH + 2)) \
+ + (2 * STREAMING_ENDPOINT_DESCRIPTOR_LENGTH) )
+
+#define TOTAL_CONTROL_INTF_LENGTH (CONTROL_INTERFACE_DESCRIPTOR_LENGTH + 1 + \
+ 2*INPUT_TERMINAL_DESCRIPTOR_LENGTH + \
+ FEATURE_UNIT_DESCRIPTOR_LENGTH + \
+ 2*OUTPUT_TERMINAL_DESCRIPTOR_LENGTH)
+
+uint8_t * USBAudio::configurationDesc() {
+ static uint8_t configDescriptor[] = {
+ // Configuration 1
+ CONFIGURATION_DESCRIPTOR_LENGTH, // bLength
+ CONFIGURATION_DESCRIPTOR, // bDescriptorType
+ LSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (LSB)
+ MSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (MSB)
+ 0x03, // bNumInterfaces
+ DEFAULT_CONFIGURATION, // bConfigurationValue
+ 0x00, // iConfiguration
+ 0x80, // bmAttributes
+ 50, // bMaxPower
+
+ // Interface 0, Alternate Setting 0, Audio Control
+ INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR, // bDescriptorType
+ 0x00, // bInterfaceNumber
+ 0x00, // bAlternateSetting
+ 0x00, // bNumEndpoints
+ AUDIO_CLASS, // bInterfaceClass
+ SUBCLASS_AUDIOCONTROL, // bInterfaceSubClass
+ 0x00, // bInterfaceProtocol
+ 0x00, // iInterface
+
+
+ // Audio Control Interface
+ CONTROL_INTERFACE_DESCRIPTOR_LENGTH + 1,// bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ CONTROL_HEADER, // bDescriptorSubtype
+ LSB(0x0100), // bcdADC (LSB)
+ MSB(0x0100), // bcdADC (MSB)
+ LSB(TOTAL_CONTROL_INTF_LENGTH), // wTotalLength
+ MSB(TOTAL_CONTROL_INTF_LENGTH), // wTotalLength
+ 0x02, // bInCollection
+ 0x01, // baInterfaceNr
+ 0x02, // baInterfaceNr
+
+ // Audio Input Terminal (Speaker)
+ INPUT_TERMINAL_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ CONTROL_INPUT_TERMINAL, // bDescriptorSubtype
+ 0x01, // bTerminalID
+ LSB(TERMINAL_USB_STREAMING), // wTerminalType
+ MSB(TERMINAL_USB_STREAMING), // wTerminalType
+ 0x00, // bAssocTerminal
+ channel_nb_in, // bNrChannels
+ LSB(channel_config_in), // wChannelConfig
+ MSB(channel_config_in), // wChannelConfig
+ 0x00, // iChannelNames
+ 0x00, // iTerminal
+
+ // Audio Feature Unit (Speaker)
+ FEATURE_UNIT_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ CONTROL_FEATURE_UNIT, // bDescriptorSubtype
+ 0x02, // bUnitID
+ 0x01, // bSourceID
+ 0x01, // bControlSize
+ CONTROL_MUTE |
+ CONTROL_VOLUME, // bmaControls(0)
+ 0x00, // bmaControls(1)
+ 0x00, // iTerminal
+
+ // Audio Output Terminal (Speaker)
+ OUTPUT_TERMINAL_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ CONTROL_OUTPUT_TERMINAL, // bDescriptorSubtype
+ 0x03, // bTerminalID
+ LSB(TERMINAL_SPEAKER), // wTerminalType
+ MSB(TERMINAL_SPEAKER), // wTerminalType
+ 0x00, // bAssocTerminal
+ 0x02, // bSourceID
+ 0x00, // iTerminal
+
+
+ // Audio Input Terminal (Microphone)
+ INPUT_TERMINAL_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ CONTROL_INPUT_TERMINAL, // bDescriptorSubtype
+ 0x04, // bTerminalID
+ LSB(TERMINAL_MICROPHONE), // wTerminalType
+ MSB(TERMINAL_MICROPHONE), // wTerminalType
+ 0x00, // bAssocTerminal
+ channel_nb_out, // bNrChannels
+ LSB(channel_config_out), // wChannelConfig
+ MSB(channel_config_out), // wChannelConfig
+ 0x00, // iChannelNames
+ 0x00, // iTerminal
+
+ // Audio Output Terminal (Microphone)
+ OUTPUT_TERMINAL_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ CONTROL_OUTPUT_TERMINAL, // bDescriptorSubtype
+ 0x05, // bTerminalID
+ LSB(TERMINAL_USB_STREAMING), // wTerminalType
+ MSB(TERMINAL_USB_STREAMING), // wTerminalType
+ 0x00, // bAssocTerminal
+ 0x04, // bSourceID
+ 0x00, // iTerminal
+
+
+
+
+
+
+ // Interface 1, Alternate Setting 0, Audio Streaming - Zero Bandwith
+ INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR, // bDescriptorType
+ 0x01, // bInterfaceNumber
+ 0x00, // bAlternateSetting
+ 0x00, // bNumEndpoints
+ AUDIO_CLASS, // bInterfaceClass
+ SUBCLASS_AUDIOSTREAMING, // bInterfaceSubClass
+ 0x00, // bInterfaceProtocol
+ 0x00, // iInterface
+
+ // Interface 1, Alternate Setting 1, Audio Streaming - Operational
+ INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR, // bDescriptorType
+ 0x01, // bInterfaceNumber
+ 0x01, // bAlternateSetting
+ 0x01, // bNumEndpoints
+ AUDIO_CLASS, // bInterfaceClass
+ SUBCLASS_AUDIOSTREAMING, // bInterfaceSubClass
+ 0x00, // bInterfaceProtocol
+ 0x00, // iInterface
+
+ // Audio Streaming Interface
+ STREAMING_INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ STREAMING_GENERAL, // bDescriptorSubtype
+ 0x01, // bTerminalLink
+ 0x00, // bDelay
+ LSB(FORMAT_PCM), // wFormatTag
+ MSB(FORMAT_PCM), // wFormatTag
+
+ // Audio Type I Format
+ FORMAT_TYPE_I_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ STREAMING_FORMAT_TYPE, // bDescriptorSubtype
+ FORMAT_TYPE_I, // bFormatType
+ channel_nb_in, // bNrChannels
+ 0x02, // bSubFrameSize
+ 16, // bBitResolution
+ 0x01, // bSamFreqType
+ LSB(FREQ_IN), // tSamFreq
+ (FREQ_IN >> 8) & 0xff, // tSamFreq
+ (FREQ_IN >> 16) & 0xff, // tSamFreq
+
+ // Endpoint - Standard Descriptor
+ ENDPOINT_DESCRIPTOR_LENGTH + 2, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPISO_OUT), // bEndpointAddress
+ E_ISOCHRONOUS, // bmAttributes
+ LSB(PACKET_SIZE_ISO_IN), // wMaxPacketSize
+ MSB(PACKET_SIZE_ISO_IN), // wMaxPacketSize
+ 0x01, // bInterval
+ 0x00, // bRefresh
+ 0x00, // bSynchAddress
+
+ // Endpoint - Audio Streaming
+ STREAMING_ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR_TYPE, // bDescriptorType
+ ENDPOINT_GENERAL, // bDescriptor
+ 0x00, // bmAttributes
+ 0x00, // bLockDelayUnits
+ LSB(0x0000), // wLockDelay
+ MSB(0x0000), // wLockDelay
+
+
+
+
+
+
+
+ // Interface 1, Alternate Setting 0, Audio Streaming - Zero Bandwith
+ INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR, // bDescriptorType
+ 0x02, // bInterfaceNumber
+ 0x00, // bAlternateSetting
+ 0x00, // bNumEndpoints
+ AUDIO_CLASS, // bInterfaceClass
+ SUBCLASS_AUDIOSTREAMING, // bInterfaceSubClass
+ 0x00, // bInterfaceProtocol
+ 0x00, // iInterface
+
+ // Interface 1, Alternate Setting 1, Audio Streaming - Operational
+ INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR, // bDescriptorType
+ 0x02, // bInterfaceNumber
+ 0x01, // bAlternateSetting
+ 0x01, // bNumEndpoints
+ AUDIO_CLASS, // bInterfaceClass
+ SUBCLASS_AUDIOSTREAMING, // bInterfaceSubClass
+ 0x00, // bInterfaceProtocol
+ 0x00, // iInterface
+
+ // Audio Streaming Interface
+ STREAMING_INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ SUBCLASS_AUDIOCONTROL, // bDescriptorSubtype
+ 0x05, // bTerminalLink (output terminal microphone)
+ 0x01, // bDelay
+ 0x01, // wFormatTag
+ 0x00, // wFormatTag
+
+ // Audio Type I Format
+ FORMAT_TYPE_I_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType
+ SUBCLASS_AUDIOSTREAMING, // bDescriptorSubtype
+ FORMAT_TYPE_I, // bFormatType
+ channel_nb_out, // bNrChannels
+ 0x02, // bSubFrameSize
+ 0x10, // bBitResolution
+ 0x01, // bSamFreqType
+ LSB(FREQ_OUT), // tSamFreq
+ (FREQ_OUT >> 8) & 0xff, // tSamFreq
+ (FREQ_OUT >> 16) & 0xff, // tSamFreq
+
+ // Endpoint - Standard Descriptor
+ ENDPOINT_DESCRIPTOR_LENGTH + 2, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPISO_IN), // bEndpointAddress
+ E_ISOCHRONOUS, // bmAttributes
+ LSB(PACKET_SIZE_ISO_OUT), // wMaxPacketSize
+ MSB(PACKET_SIZE_ISO_OUT), // wMaxPacketSize
+ 0x01, // bInterval
+ 0x00, // bRefresh
+ 0x00, // bSynchAddress
+
+ // Endpoint - Audio Streaming
+ STREAMING_ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR_TYPE, // bDescriptorType
+ ENDPOINT_GENERAL, // bDescriptor
+ 0x00, // bmAttributes
+ 0x00, // bLockDelayUnits
+ LSB(0x0000), // wLockDelay
+ MSB(0x0000), // wLockDelay
+
+ // Terminator
+ 0 // bLength
+ };
+ return configDescriptor;
+}
+
+uint8_t * USBAudio::stringIinterfaceDesc() {
+ static uint8_t stringIinterfaceDescriptor[] = {
+ 0x0c, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'A',0,'u',0,'d',0,'i',0,'o',0 //bString iInterface - Audio
+ };
+ return stringIinterfaceDescriptor;
+}
+
+uint8_t * USBAudio::stringIproductDesc() {
+ static uint8_t stringIproductDescriptor[] = {
+ 0x16, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'M',0,'b',0,'e',0,'d',0,' ',0,'A',0,'u',0,'d',0,'i',0,'o',0 //bString iProduct - Mbed Audio
+ };
+ return stringIproductDescriptor;
+}
diff -r 000000000000 -r ecc3925d3f8c USBAudio/USBAudio.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBAudio/USBAudio.h Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,287 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBAudio_H
+#define USBAudio_H
+
+/* These headers are included for child class. */
+#include "USBEndpoints.h"
+#include "USBDescriptor.h"
+#include "USBDevice_Types.h"
+
+#include "USBDevice.h"
+
+
+/**
+* USBAudio example
+*
+* @code
+* #include "mbed.h"
+* #include "USBAudio.h"
+*
+* Serial pc(USBTX, USBRX);
+*
+* // frequency: 48 kHz
+* #define FREQ 48000
+*
+* // 1 channel: mono
+* #define NB_CHA 1
+*
+* // length of an audio packet: each ms, we receive 48 * 16bits ->48 * 2 bytes. as there is one channel, the length will be 48 * 2 * 1
+* #define AUDIO_LENGTH_PACKET 48 * 2 * 1
+*
+* // USBAudio
+* USBAudio audio(FREQ, NB_CHA);
+*
+* int main() {
+* int16_t buf[AUDIO_LENGTH_PACKET/2];
+*
+* while (1) {
+* // read an audio packet
+* audio.read((uint8_t *)buf);
+*
+*
+* // print packet received
+* pc.printf("recv: ");
+* for(int i = 0; i < AUDIO_LENGTH_PACKET/2; i++) {
+* pc.printf("%d ", buf[i]);
+* }
+* pc.printf("\r\n");
+* }
+* }
+* @endcode
+*/
+class USBAudio: public USBDevice {
+public:
+
+ /**
+ * Constructor
+ *
+ * @param frequency_in frequency in Hz (default: 48000)
+ * @param channel_nb_in channel number (1 or 2) (default: 1)
+ * @param frequency_out frequency in Hz (default: 8000)
+ * @param channel_nb_out_in channel number (1 or 2) (default: 1)
+ * @param vendor_id Your vendor_id
+ * @param product_id Your product_id
+ * @param product_release Your preoduct_release
+ */
+ USBAudio(uint32_t frequency_in = 48000, uint8_t channel_nb_in = 1, uint32_t frequency_out = 8000, uint8_t channel_nb_out = 1, uint16_t vendor_id = 0x7bb8, uint16_t product_id = 0x1111, uint16_t product_release = 0x0100);
+
+ /**
+ * Get current volume between 0.0 and 1.0
+ *
+ * @returns volume
+ */
+ float getVolume();
+
+ /**
+ * Read an audio packet. During a frame, only a single reading (you can't write and read an audio packet during the same frame)can be done using this method. Warning: Blocking
+ *
+ * @param buf pointer on a buffer which will be filled with an audio packet
+ *
+ * @returns true if successfull
+ */
+ bool read(uint8_t * buf);
+
+ /**
+ * Try to read an audio packet. During a frame, only a single reading (you can't write and read an audio packet during the same frame)can be done using this method. Warning: Non Blocking
+ *
+ * @param buf pointer on a buffer which will be filled if an audio packet is available
+ *
+ * @returns true if successfull
+ */
+ bool readNB(uint8_t * buf);
+
+ /**
+ * Write an audio packet. During a frame, only a single writing (you can't write and read an audio packet during the same frame)can be done using this method.
+ *
+ * @param buf pointer on the audio packet which will be sent
+ * @returns true if successful
+ */
+ bool write(uint8_t * buf);
+
+ /**
+ * Write and read an audio packet at the same time (on the same frame)
+ *
+ * @param buf_read pointer on a buffer which will be filled with an audio packet
+ * @param buf_write pointer on the audio packet which will be sent
+ * @returns true if successful
+ */
+ bool readWrite(uint8_t * buf_read, uint8_t * buf_write);
+
+
+ /** attach a handler to update the volume
+ *
+ * @param function Function to attach
+ *
+ */
+ void attach(void(*fptr)(void)) {
+ updateVol.attach(fptr);
+ }
+
+ /** Attach a nonstatic void/void member function to update the volume
+ *
+ * @param tptr Object pointer
+ * @param mptr Member function pointer
+ *
+ */
+ template<typename T>
+ void attach(T *tptr, void(T::*mptr)(void)) {
+ updateVol.attach(tptr, mptr);
+ }
+
+
+protected:
+
+ /*
+ * Called by USBDevice layer. Set configuration of the device.
+ * For instance, you can add all endpoints that you need on this function.
+ *
+ * @param configuration Number of the configuration
+ * @returns true if class handles this request
+ */
+ virtual bool USBCallback_setConfiguration(uint8_t configuration);
+
+ /*
+ * Called by USBDevice on Endpoint0 request. Warning: Called in ISR context
+ * This is used to handle extensions to standard requests
+ * and class specific requests
+ *
+ * @returns true if class handles this request
+ */
+ virtual bool USBCallback_request();
+
+ /*
+ * Get string product descriptor
+ *
+ * @returns pointer to the string product descriptor
+ */
+ virtual uint8_t * stringIproductDesc();
+
+ /*
+ * Get string interface descriptor
+ *
+ * @returns pointer to the string interface descriptor
+ */
+ virtual uint8_t * stringIinterfaceDesc();
+
+ /*
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc();
+
+ /*
+ * Called by USBDevice layer. Set interface/alternate of the device.
+ *
+ * @param interface Number of the interface to be configured
+ * @param alternate Number of the alternate to be configured
+ * @returns true if class handles this request
+ */
+ virtual bool USBCallback_setInterface(uint16_t interface, uint8_t alternate);
+
+ /*
+ * Called by USBDevice on Endpoint0 request completion
+ * if the 'notify' flag has been set to true. Warning: Called in ISR context
+ *
+ * In this case it is used to indicate that a HID report has
+ * been received from the host on endpoint 0
+ *
+ * @param buf buffer received on endpoint 0
+ * @param length length of this buffer
+ */
+ virtual void USBCallback_requestCompleted(uint8_t * buf, uint32_t length);
+
+ /*
+ * Callback called on each Start of Frame event
+ */
+ virtual void SOF(int frameNumber);
+
+ /*
+ * Callback called when a packet is received
+ */
+ virtual bool EP3_OUT_callback();
+
+ /*
+ * Callback called when a packet has been sent
+ */
+ virtual bool EP3_IN_callback();
+
+private:
+
+ // stream available ?
+ volatile bool available;
+
+ // interrupt OUT has been received
+ volatile bool interruptOUT;
+
+ // interrupt IN has been received
+ volatile bool interruptIN;
+
+ // audio packet has been written
+ volatile bool writeIN;
+
+ // FREQ
+ uint32_t FREQ_OUT;
+ uint32_t FREQ_IN;
+
+ // size of the maximum packet for the isochronous endpoint
+ uint32_t PACKET_SIZE_ISO_IN;
+ uint32_t PACKET_SIZE_ISO_OUT;
+
+ // mono, stereo,...
+ uint8_t channel_nb_in;
+ uint8_t channel_nb_out;
+
+ // channel config: master, left, right
+ uint8_t channel_config_in;
+ uint8_t channel_config_out;
+
+ // mute state
+ uint8_t mute;
+
+ // Volume Current Value
+ uint16_t volCur;
+
+ // Volume Minimum Value
+ uint16_t volMin;
+
+ // Volume Maximum Value
+ uint16_t volMax;
+
+ // Volume Resolution
+ uint16_t volRes;
+
+ // Buffer containing one audio packet (to be read)
+ volatile uint8_t * buf_stream_in;
+
+ // Buffer containing one audio packet (to be written)
+ volatile uint8_t * buf_stream_out;
+
+ // callback to update volume
+ FunctionPointer updateVol;
+
+ // boolean showing that the SOF handler has been called. Useful for readNB.
+ volatile bool SOF_handler;
+
+ volatile float volume;
+
+};
+
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBAudio/USBAudio_Types.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBAudio/USBAudio_Types.h Tue May 24 13:16:55 2016 +0000 @@ -0,0 +1,97 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#ifndef USBAUDIO_TYPES_H +#define USBAUDIO_TYPES_H + + +#define DEFAULT_CONFIGURATION (1) + +// Audio Request Codes +#define REQUEST_SET_CUR 0x01 +#define REQUEST_GET_CUR 0x81 +#define REQUEST_SET_MIN 0x02 +#define REQUEST_GET_MIN 0x82 +#define REQUEST_SET_MAX 0x03 +#define REQUEST_GET_MAX 0x83 +#define REQUEST_SET_RES 0x04 +#define REQUEST_GET_RES 0x84 + +#define MUTE_CONTROL 0x01 +#define VOLUME_CONTROL 0x02 + + +// Audio Descriptor Sizes +#define CONTROL_INTERFACE_DESCRIPTOR_LENGTH 0x09 +#define STREAMING_INTERFACE_DESCRIPTOR_LENGTH 0x07 +#define INPUT_TERMINAL_DESCRIPTOR_LENGTH 0x0C +#define OUTPUT_TERMINAL_DESCRIPTOR_LENGTH 0x09 +#define FEATURE_UNIT_DESCRIPTOR_LENGTH 0x09 +#define STREAMING_ENDPOINT_DESCRIPTOR_LENGTH 0x07 + +// Audio Format Type Descriptor Sizes +#define FORMAT_TYPE_I_DESCRIPTOR_LENGTH 0x0b + +#define AUDIO_CLASS 0x01 +#define SUBCLASS_AUDIOCONTROL 0x01 +#define SUBCLASS_AUDIOSTREAMING 0x02 + +// Audio Descriptor Types +#define INTERFACE_DESCRIPTOR_TYPE 0x24 +#define ENDPOINT_DESCRIPTOR_TYPE 0x25 + +// Audio Control Interface Descriptor Subtypes +#define CONTROL_HEADER 0x01 +#define CONTROL_INPUT_TERMINAL 0x02 +#define CONTROL_OUTPUT_TERMINAL 0x03 +#define CONTROL_FEATURE_UNIT 0x06 + +// USB Terminal Types +#define TERMINAL_USB_STREAMING 0x0101 + +// Predefined Audio Channel Configuration Bits +// Mono +#define CHANNEL_M 0x0000 +#define CHANNEL_L 0x0001 /* Left Front */ +#define CHANNEL_R 0x0002 /* Right Front */ + +// Feature Unit Control Bits +#define CONTROL_MUTE 0x0001 +#define CONTROL_VOLUME 0x0002 + +// Input Terminal Types +#define TERMINAL_MICROPHONE 0x0201 + +// Output Terminal Types +#define TERMINAL_SPEAKER 0x0301 +#define TERMINAL_HEADPHONES 0x0302 + +// Audio Streaming Interface Descriptor Subtypes +#define STREAMING_GENERAL 0x01 +#define STREAMING_FORMAT_TYPE 0x02 + +// Audio Data Format Type I Codes +#define FORMAT_PCM 0x0001 + +// Audio Format Types +#define FORMAT_TYPE_I 0x01 + +// Audio Endpoint Descriptor Subtypes +#define ENDPOINT_GENERAL 0x01 + +#endif
diff -r 000000000000 -r ecc3925d3f8c USBDevice/USBDescriptor.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBDescriptor.h Tue May 24 13:16:55 2016 +0000 @@ -0,0 +1,74 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +/* Standard descriptor types */ +#define DEVICE_DESCRIPTOR (1) +#define CONFIGURATION_DESCRIPTOR (2) +#define STRING_DESCRIPTOR (3) +#define INTERFACE_DESCRIPTOR (4) +#define ENDPOINT_DESCRIPTOR (5) +#define QUALIFIER_DESCRIPTOR (6) + +/* Standard descriptor lengths */ +#define DEVICE_DESCRIPTOR_LENGTH (0x12) +#define CONFIGURATION_DESCRIPTOR_LENGTH (0x09) +#define INTERFACE_DESCRIPTOR_LENGTH (0x09) +#define ENDPOINT_DESCRIPTOR_LENGTH (0x07) + + +/*string offset*/ +#define STRING_OFFSET_LANGID (0) +#define STRING_OFFSET_IMANUFACTURER (1) +#define STRING_OFFSET_IPRODUCT (2) +#define STRING_OFFSET_ISERIAL (3) +#define STRING_OFFSET_ICONFIGURATION (4) +#define STRING_OFFSET_IINTERFACE (5) + +/* USB Specification Release Number */ +#define USB_VERSION_2_0 (0x0200) + +/* Least/Most significant byte of short integer */ +#define LSB(n) ((n)&0xff) +#define MSB(n) (((n)&0xff00)>>8) + +/* Convert physical endpoint number to descriptor endpoint number */ +#define PHY_TO_DESC(endpoint) (((endpoint)>>1) | (((endpoint) & 1) ? 0x80:0)) + +/* bmAttributes in configuration descriptor */ +/* C_RESERVED must always be set */ +#define C_RESERVED (1U<<7) +#define C_SELF_POWERED (1U<<6) +#define C_REMOTE_WAKEUP (1U<<5) + +/* bMaxPower in configuration descriptor */ +#define C_POWER(mA) ((mA)/2) + +/* bmAttributes in endpoint descriptor */ +#define E_CONTROL (0x00) +#define E_ISOCHRONOUS (0x01) +#define E_BULK (0x02) +#define E_INTERRUPT (0x03) + +/* For isochronous endpoints only: */ +#define E_NO_SYNCHRONIZATION (0x00) +#define E_ASYNCHRONOUS (0x04) +#define E_ADAPTIVE (0x08) +#define E_SYNCHRONOUS (0x0C) +#define E_DATA (0x00) +#define E_FEEDBACK (0x10) +#define E_IMPLICIT_FEEDBACK (0x20)
diff -r 000000000000 -r ecc3925d3f8c USBDevice/USBDevice.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBDevice.cpp Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,977 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+
+#include "USBEndpoints.h"
+#include "USBDevice.h"
+#include "USBDescriptor.h"
+
+//#define DEBUG
+
+/* Device status */
+#define DEVICE_STATUS_SELF_POWERED (1U<<0)
+#define DEVICE_STATUS_REMOTE_WAKEUP (1U<<1)
+
+/* Endpoint status */
+#define ENDPOINT_STATUS_HALT (1U<<0)
+
+/* Standard feature selectors */
+#define DEVICE_REMOTE_WAKEUP (1)
+#define ENDPOINT_HALT (0)
+
+/* Macro to convert wIndex endpoint number to physical endpoint number */
+#define WINDEX_TO_PHYSICAL(endpoint) (((endpoint & 0x0f) << 1) + \
+ ((endpoint & 0x80) ? 1 : 0))
+
+
+bool USBDevice::requestGetDescriptor(void)
+{
+ bool success = false;
+#ifdef DEBUG
+ printf("get descr: type: %d\r\n", DESCRIPTOR_TYPE(transfer.setup.wValue));
+#endif
+ switch (DESCRIPTOR_TYPE(transfer.setup.wValue))
+ {
+ case DEVICE_DESCRIPTOR:
+ if (deviceDesc() != NULL)
+ {
+ if ((deviceDesc()[0] == DEVICE_DESCRIPTOR_LENGTH) \
+ && (deviceDesc()[1] == DEVICE_DESCRIPTOR))
+ {
+#ifdef DEBUG
+ printf("device descr\r\n");
+#endif
+ transfer.remaining = DEVICE_DESCRIPTOR_LENGTH;
+ transfer.ptr = deviceDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ }
+ }
+ break;
+ case CONFIGURATION_DESCRIPTOR:
+ if (configurationDesc() != NULL)
+ {
+ if ((configurationDesc()[0] == CONFIGURATION_DESCRIPTOR_LENGTH) \
+ && (configurationDesc()[1] == CONFIGURATION_DESCRIPTOR))
+ {
+#ifdef DEBUG
+ printf("conf descr request\r\n");
+#endif
+ /* Get wTotalLength */
+ transfer.remaining = configurationDesc()[2] \
+ | (configurationDesc()[3] << 8);
+
+ transfer.ptr = configurationDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ }
+ }
+ break;
+ case STRING_DESCRIPTOR:
+#ifdef DEBUG
+ printf("str descriptor\r\n");
+#endif
+ switch (DESCRIPTOR_INDEX(transfer.setup.wValue))
+ {
+ case STRING_OFFSET_LANGID:
+#ifdef DEBUG
+ printf("1\r\n");
+#endif
+ transfer.remaining = stringLangidDesc()[0];
+ transfer.ptr = stringLangidDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case STRING_OFFSET_IMANUFACTURER:
+#ifdef DEBUG
+ printf("2\r\n");
+#endif
+ transfer.remaining = stringImanufacturerDesc()[0];
+ transfer.ptr = stringImanufacturerDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case STRING_OFFSET_IPRODUCT:
+#ifdef DEBUG
+ printf("3\r\n");
+#endif
+ transfer.remaining = stringIproductDesc()[0];
+ transfer.ptr = stringIproductDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case STRING_OFFSET_ISERIAL:
+#ifdef DEBUG
+ printf("4\r\n");
+#endif
+ transfer.remaining = stringIserialDesc()[0];
+ transfer.ptr = stringIserialDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case STRING_OFFSET_ICONFIGURATION:
+#ifdef DEBUG
+ printf("5\r\n");
+#endif
+ transfer.remaining = stringIConfigurationDesc()[0];
+ transfer.ptr = stringIConfigurationDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case STRING_OFFSET_IINTERFACE:
+#ifdef DEBUG
+ printf("6\r\n");
+#endif
+ transfer.remaining = stringIinterfaceDesc()[0];
+ transfer.ptr = stringIinterfaceDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ }
+ break;
+ case INTERFACE_DESCRIPTOR:
+#ifdef DEBUG
+ printf("interface descr\r\n");
+#endif
+ case ENDPOINT_DESCRIPTOR:
+#ifdef DEBUG
+ printf("endpoint descr\r\n");
+#endif
+ /* TODO: Support is optional, not implemented here */
+ break;
+ default:
+#ifdef DEBUG
+ printf("ERROR\r\n");
+#endif
+ break;
+ }
+
+ return success;
+}
+
+void USBDevice::decodeSetupPacket(uint8_t *data, SETUP_PACKET *packet)
+{
+ /* Fill in the elements of a SETUP_PACKET structure from raw data */
+ packet->bmRequestType.dataTransferDirection = (data[0] & 0x80) >> 7;
+ packet->bmRequestType.Type = (data[0] & 0x60) >> 5;
+ packet->bmRequestType.Recipient = data[0] & 0x1f;
+ packet->bRequest = data[1];
+ packet->wValue = (data[2] | (uint16_t)data[3] << 8);
+ packet->wIndex = (data[4] | (uint16_t)data[5] << 8);
+ packet->wLength = (data[6] | (uint16_t)data[7] << 8);
+}
+
+
+bool USBDevice::controlOut(void)
+{
+ /* Control transfer data OUT stage */
+ uint8_t buffer[MAX_PACKET_SIZE_EP0];
+ uint32_t packetSize;
+
+ /* Check we should be transferring data OUT */
+ if (transfer.direction != HOST_TO_DEVICE)
+ {
+ return false;
+ }
+
+ /* Read from endpoint */
+ packetSize = EP0getReadResult(buffer);
+
+ /* Check if transfer size is valid */
+ if (packetSize > transfer.remaining)
+ {
+ /* Too big */
+ return false;
+ }
+
+ /* Update transfer */
+ transfer.ptr += packetSize;
+ transfer.remaining -= packetSize;
+
+ /* Check if transfer has completed */
+ if (transfer.remaining == 0)
+ {
+ /* Transfer completed */
+ if (transfer.notify)
+ {
+ /* Notify class layer. */
+ USBCallback_requestCompleted(buffer, packetSize);
+ transfer.notify = false;
+ }
+ /* Status stage */
+ EP0write(NULL, 0);
+ }
+ else
+ {
+ EP0read();
+ }
+
+ return true;
+}
+
+bool USBDevice::controlIn(void)
+{
+ /* Control transfer data IN stage */
+ uint32_t packetSize;
+
+ /* Check if transfer has completed (status stage transactions */
+ /* also have transfer.remaining == 0) */
+ if (transfer.remaining == 0)
+ {
+ if (transfer.zlp)
+ {
+ /* Send zero length packet */
+ EP0write(NULL, 0);
+ transfer.zlp = false;
+ }
+
+ /* Transfer completed */
+ if (transfer.notify)
+ {
+ /* Notify class layer. */
+ USBCallback_requestCompleted(NULL, 0);
+ transfer.notify = false;
+ }
+
+ EP0read();
+ EP0readStage();
+
+ /* Completed */
+ return true;
+ }
+
+ /* Check we should be transferring data IN */
+ if (transfer.direction != DEVICE_TO_HOST)
+ {
+ return false;
+ }
+
+ packetSize = transfer.remaining;
+
+ if (packetSize > MAX_PACKET_SIZE_EP0)
+ {
+ packetSize = MAX_PACKET_SIZE_EP0;
+ }
+
+ /* Write to endpoint */
+ EP0write(transfer.ptr, packetSize);
+
+ /* Update transfer */
+ transfer.ptr += packetSize;
+ transfer.remaining -= packetSize;
+
+ return true;
+}
+
+bool USBDevice::requestSetAddress(void)
+{
+ /* Set the device address */
+ setAddress(transfer.setup.wValue);
+
+ if (transfer.setup.wValue == 0)
+ {
+ device.state = DEFAULT;
+ }
+ else
+ {
+ device.state = ADDRESS;
+ }
+
+ return true;
+}
+
+bool USBDevice::requestSetConfiguration(void)
+{
+
+ device.configuration = transfer.setup.wValue;
+ /* Set the device configuration */
+ if (device.configuration == 0)
+ {
+ /* Not configured */
+ unconfigureDevice();
+ device.state = ADDRESS;
+ }
+ else
+ {
+ if (USBCallback_setConfiguration(device.configuration))
+ {
+ /* Valid configuration */
+ configureDevice();
+ device.state = CONFIGURED;
+ }
+ else
+ {
+ return false;
+ }
+ }
+
+ return true;
+}
+
+bool USBDevice::requestGetConfiguration(void)
+{
+ /* Send the device configuration */
+ transfer.ptr = &device.configuration;
+ transfer.remaining = sizeof(device.configuration);
+ transfer.direction = DEVICE_TO_HOST;
+ return true;
+}
+
+bool USBDevice::requestGetInterface(void)
+{
+ /* Return the selected alternate setting for an interface */
+
+ if (device.state != CONFIGURED)
+ {
+ return false;
+ }
+
+ /* Send the alternate setting */
+ transfer.setup.wIndex = currentInterface;
+ transfer.ptr = ¤tAlternate;
+ transfer.remaining = sizeof(currentAlternate);
+ transfer.direction = DEVICE_TO_HOST;
+ return true;
+}
+
+bool USBDevice::requestSetInterface(void)
+{
+ bool success = false;
+ if(USBCallback_setInterface(transfer.setup.wIndex, transfer.setup.wValue))
+ {
+ success = true;
+ currentInterface = transfer.setup.wIndex;
+ currentAlternate = transfer.setup.wValue;
+ }
+ return success;
+}
+
+bool USBDevice::requestSetFeature()
+{
+ bool success = false;
+
+ if (device.state != CONFIGURED)
+ {
+ /* Endpoint or interface must be zero */
+ if (transfer.setup.wIndex != 0)
+ {
+ return false;
+ }
+ }
+
+ switch (transfer.setup.bmRequestType.Recipient)
+ {
+ case DEVICE_RECIPIENT:
+ /* TODO: Remote wakeup feature not supported */
+ break;
+ case ENDPOINT_RECIPIENT:
+ if (transfer.setup.wValue == ENDPOINT_HALT)
+ {
+ /* TODO: We should check that the endpoint number is valid */
+ stallEndpoint(
+ WINDEX_TO_PHYSICAL(transfer.setup.wIndex));
+ success = true;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return success;
+}
+
+bool USBDevice::requestClearFeature()
+{
+ bool success = false;
+
+ if (device.state != CONFIGURED)
+ {
+ /* Endpoint or interface must be zero */
+ if (transfer.setup.wIndex != 0)
+ {
+ return false;
+ }
+ }
+
+ switch (transfer.setup.bmRequestType.Recipient)
+ {
+ case DEVICE_RECIPIENT:
+ /* TODO: Remote wakeup feature not supported */
+ break;
+ case ENDPOINT_RECIPIENT:
+ /* TODO: We should check that the endpoint number is valid */
+ if (transfer.setup.wValue == ENDPOINT_HALT)
+ {
+ unstallEndpoint( WINDEX_TO_PHYSICAL(transfer.setup.wIndex));
+ success = true;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return success;
+}
+
+bool USBDevice::requestGetStatus(void)
+{
+ static uint16_t status;
+ bool success = false;
+
+ if (device.state != CONFIGURED)
+ {
+ /* Endpoint or interface must be zero */
+ if (transfer.setup.wIndex != 0)
+ {
+ return false;
+ }
+ }
+
+ switch (transfer.setup.bmRequestType.Recipient)
+ {
+ case DEVICE_RECIPIENT:
+ /* TODO: Currently only supports self powered devices */
+ status = DEVICE_STATUS_SELF_POWERED;
+ success = true;
+ break;
+ case INTERFACE_RECIPIENT:
+ status = 0;
+ success = true;
+ break;
+ case ENDPOINT_RECIPIENT:
+ /* TODO: We should check that the endpoint number is valid */
+ if (getEndpointStallState(
+ WINDEX_TO_PHYSICAL(transfer.setup.wIndex)))
+ {
+ status = ENDPOINT_STATUS_HALT;
+ }
+ else
+ {
+ status = 0;
+ }
+ success = true;
+ break;
+ default:
+ break;
+ }
+
+ if (success)
+ {
+ /* Send the status */
+ transfer.ptr = (uint8_t *)&status; /* Assumes little endian */
+ transfer.remaining = sizeof(status);
+ transfer.direction = DEVICE_TO_HOST;
+ }
+
+ return success;
+}
+
+bool USBDevice::requestSetup(void)
+{
+ bool success = false;
+
+ /* Process standard requests */
+ if ((transfer.setup.bmRequestType.Type == STANDARD_TYPE))
+ {
+ switch (transfer.setup.bRequest)
+ {
+ case GET_STATUS:
+ success = requestGetStatus();
+ break;
+ case CLEAR_FEATURE:
+ success = requestClearFeature();
+ break;
+ case SET_FEATURE:
+ success = requestSetFeature();
+ break;
+ case SET_ADDRESS:
+ success = requestSetAddress();
+ break;
+ case GET_DESCRIPTOR:
+ success = requestGetDescriptor();
+ break;
+ case SET_DESCRIPTOR:
+ /* TODO: Support is optional, not implemented here */
+ success = false;
+ break;
+ case GET_CONFIGURATION:
+ success = requestGetConfiguration();
+ break;
+ case SET_CONFIGURATION:
+ success = requestSetConfiguration();
+ break;
+ case GET_INTERFACE:
+ success = requestGetInterface();
+ break;
+ case SET_INTERFACE:
+ success = requestSetInterface();
+ break;
+ default:
+ break;
+ }
+ }
+
+ return success;
+}
+
+bool USBDevice::controlSetup(void)
+{
+ bool success = false;
+
+ /* Control transfer setup stage */
+ uint8_t buffer[MAX_PACKET_SIZE_EP0];
+
+ EP0setup(buffer);
+
+ /* Initialise control transfer state */
+ decodeSetupPacket(buffer, &transfer.setup);
+ transfer.ptr = NULL;
+ transfer.remaining = 0;
+ transfer.direction = 0;
+ transfer.zlp = false;
+ transfer.notify = false;
+
+#ifdef DEBUG
+ printf("dataTransferDirection: %d\r\nType: %d\r\nRecipient: %d\r\nbRequest: %d\r\nwValue: %d\r\nwIndex: %d\r\nwLength: %d\r\n",transfer.setup.bmRequestType.dataTransferDirection,
+ transfer.setup.bmRequestType.Type,
+ transfer.setup.bmRequestType.Recipient,
+ transfer.setup.bRequest,
+ transfer.setup.wValue,
+ transfer.setup.wIndex,
+ transfer.setup.wLength);
+#endif
+
+ /* Class / vendor specific */
+ success = USBCallback_request();
+
+ if (!success)
+ {
+ /* Standard requests */
+ if (!requestSetup())
+ {
+#ifdef DEBUG
+ printf("fail!!!!\r\n");
+#endif
+ return false;
+ }
+ }
+
+ /* Check transfer size and direction */
+ if (transfer.setup.wLength>0)
+ {
+ if (transfer.setup.bmRequestType.dataTransferDirection \
+ == DEVICE_TO_HOST)
+ {
+ /* IN data stage is required */
+ if (transfer.direction != DEVICE_TO_HOST)
+ {
+ return false;
+ }
+
+ /* Transfer must be less than or equal to the size */
+ /* requested by the host */
+ if (transfer.remaining > transfer.setup.wLength)
+ {
+ transfer.remaining = transfer.setup.wLength;
+ }
+ }
+ else
+ {
+
+ /* OUT data stage is required */
+ if (transfer.direction != HOST_TO_DEVICE)
+ {
+ return false;
+ }
+
+ /* Transfer must be equal to the size requested by the host */
+ if (transfer.remaining != transfer.setup.wLength)
+ {
+ return false;
+ }
+ }
+ }
+ else
+ {
+ /* No data stage; transfer size must be zero */
+ if (transfer.remaining != 0)
+ {
+ return false;
+ }
+ }
+
+ /* Data or status stage if applicable */
+ if (transfer.setup.wLength>0)
+ {
+ if (transfer.setup.bmRequestType.dataTransferDirection \
+ == DEVICE_TO_HOST)
+ {
+ /* Check if we'll need to send a zero length packet at */
+ /* the end of this transfer */
+ if (transfer.setup.wLength > transfer.remaining)
+ {
+ /* Device wishes to transfer less than host requested */
+ if ((transfer.remaining % MAX_PACKET_SIZE_EP0) == 0)
+ {
+ /* Transfer is a multiple of EP0 max packet size */
+ transfer.zlp = true;
+ }
+ }
+
+ /* IN stage */
+ controlIn();
+ }
+ else
+ {
+ /* OUT stage */
+ EP0read();
+ }
+ }
+ else
+ {
+ /* Status stage */
+ EP0write(NULL, 0);
+ }
+
+ return true;
+}
+
+void USBDevice::busReset(void)
+{
+ device.state = DEFAULT;
+ device.configuration = 0;
+ device.suspended = false;
+
+ /* Call class / vendor specific busReset function */
+ USBCallback_busReset();
+}
+
+void USBDevice::EP0setupCallback(void)
+{
+ /* Endpoint 0 setup event */
+ if (!controlSetup())
+ {
+ /* Protocol stall */
+ EP0stall();
+ }
+
+ /* Return true if an OUT data stage is expected */
+}
+
+void USBDevice::EP0out(void)
+{
+ /* Endpoint 0 OUT data event */
+ if (!controlOut())
+ {
+ /* Protocol stall; this will stall both endpoints */
+ EP0stall();
+ }
+}
+
+void USBDevice::EP0in(void)
+{
+#ifdef DEBUG
+ printf("EP0IN\r\n");
+#endif
+ /* Endpoint 0 IN data event */
+ if (!controlIn())
+ {
+ /* Protocol stall; this will stall both endpoints */
+ EP0stall();
+ }
+}
+
+bool USBDevice::configured(void)
+{
+ /* Returns true if device is in the CONFIGURED state */
+ return (device.state == CONFIGURED);
+}
+
+void USBDevice::connect(void)
+{
+ /* Connect device */
+ USBHAL::connect();
+ /* Block if not configured */
+ while (!configured());
+}
+
+void USBDevice::disconnect(void)
+{
+ /* Disconnect device */
+ USBHAL::disconnect();
+}
+
+CONTROL_TRANSFER * USBDevice::getTransferPtr(void)
+{
+ return &transfer;
+}
+
+bool USBDevice::addEndpoint(uint8_t endpoint, uint32_t maxPacket)
+{
+ return realiseEndpoint(endpoint, maxPacket, 0);
+}
+
+bool USBDevice::addRateFeedbackEndpoint(uint8_t endpoint, uint32_t maxPacket)
+{
+ /* For interrupt endpoints only */
+ return realiseEndpoint(endpoint, maxPacket, RATE_FEEDBACK_MODE);
+}
+
+uint8_t * USBDevice::findDescriptor(uint8_t descriptorType)
+{
+ /* Find a descriptor within the list of descriptors */
+ /* following a configuration descriptor. */
+ uint16_t wTotalLength;
+ uint8_t *ptr;
+
+ if (configurationDesc() == NULL)
+ {
+ return NULL;
+ }
+
+ /* Check this is a configuration descriptor */
+ if ((configurationDesc()[0] != CONFIGURATION_DESCRIPTOR_LENGTH) \
+ || (configurationDesc()[1] != CONFIGURATION_DESCRIPTOR))
+ {
+ return NULL;
+ }
+
+ wTotalLength = configurationDesc()[2] | (configurationDesc()[3] << 8);
+
+ /* Check there are some more descriptors to follow */
+ if (wTotalLength <= (CONFIGURATION_DESCRIPTOR_LENGTH+2))
+ /* +2 is for bLength and bDescriptorType of next descriptor */
+ {
+ return false;
+ }
+
+ /* Start at first descriptor after the configuration descriptor */
+ ptr = &(configurationDesc()[CONFIGURATION_DESCRIPTOR_LENGTH]);
+
+ do {
+ if (ptr[1] /* bDescriptorType */ == descriptorType)
+ {
+ /* Found */
+ return ptr;
+ }
+
+ /* Skip to next descriptor */
+ ptr += ptr[0]; /* bLength */
+ } while (ptr < (configurationDesc() + wTotalLength));
+
+ /* Reached end of the descriptors - not found */
+ return NULL;
+}
+
+
+void USBDevice::connectStateChanged(unsigned int connected)
+{
+}
+
+void USBDevice::suspendStateChanged(unsigned int suspended)
+{
+}
+
+
+USBDevice::USBDevice(uint16_t vendor_id, uint16_t product_id, uint16_t product_release){
+ VENDOR_ID = vendor_id;
+ PRODUCT_ID = product_id;
+ PRODUCT_RELEASE = product_release;
+
+ /* Set initial device state */
+ device.state = POWERED;
+ device.configuration = 0;
+ device.suspended = false;
+};
+
+
+bool USBDevice::readStart(uint8_t endpoint, uint32_t maxSize)
+{
+ return endpointRead(endpoint, maxSize) == EP_PENDING;
+}
+
+
+bool USBDevice::write(uint8_t endpoint, uint8_t * buffer, uint32_t size, uint32_t maxSize)
+{
+ EP_STATUS result;
+
+ if (size > maxSize)
+ {
+ return false;
+ }
+
+
+ if(!configured()) {
+ return false;
+ }
+
+ /* Send report */
+ result = endpointWrite(endpoint, buffer, size);
+
+ if (result != EP_PENDING)
+ {
+ return false;
+ }
+
+ /* Wait for completion */
+ do {
+ result = endpointWriteResult(endpoint);
+ } while ((result == EP_PENDING) && configured());
+
+ return (result == EP_COMPLETED);
+}
+
+
+bool USBDevice::writeNB(uint8_t endpoint, uint8_t * buffer, uint32_t size, uint32_t maxSize)
+{
+ EP_STATUS result;
+
+ if (size > maxSize)
+ {
+ return false;
+ }
+
+ if(!configured()) {
+ return false;
+ }
+
+ /* Send report */
+ result = endpointWrite(endpoint, buffer, size);
+
+ if (result != EP_PENDING)
+ {
+ return false;
+ }
+
+ result = endpointWriteResult(endpoint);
+
+ return (result == EP_COMPLETED);
+}
+
+
+
+bool USBDevice::readEP(uint8_t endpoint, uint8_t * buffer, uint32_t * size, uint32_t maxSize)
+{
+ EP_STATUS result;
+
+ if(!configured()) {
+ return false;
+ }
+
+ /* Wait for completion */
+ do {
+ result = endpointReadResult(endpoint, buffer, size);
+ } while ((result == EP_PENDING) && configured());
+
+ return (result == EP_COMPLETED);
+}
+
+
+bool USBDevice::readEP_NB(uint8_t endpoint, uint8_t * buffer, uint32_t * size, uint32_t maxSize)
+{
+ EP_STATUS result;
+
+ if(!configured()) {
+ return false;
+ }
+
+ result = endpointReadResult(endpoint, buffer, size);
+
+ return (result == EP_COMPLETED);
+}
+
+
+
+uint8_t * USBDevice::deviceDesc() {
+ static uint8_t deviceDescriptor[] = {
+ DEVICE_DESCRIPTOR_LENGTH, /* bLength */
+ DEVICE_DESCRIPTOR, /* bDescriptorType */
+ LSB(USB_VERSION_2_0), /* bcdUSB (LSB) */
+ MSB(USB_VERSION_2_0), /* bcdUSB (MSB) */
+ 0x00, /* bDeviceClass */
+ 0x00, /* bDeviceSubClass */
+ 0x00, /* bDeviceprotocol */
+ MAX_PACKET_SIZE_EP0, /* bMaxPacketSize0 */
+ LSB(VENDOR_ID), /* idVendor (LSB) */
+ MSB(VENDOR_ID), /* idVendor (MSB) */
+ LSB(PRODUCT_ID), /* idProduct (LSB) */
+ MSB(PRODUCT_ID), /* idProduct (MSB) */
+ LSB(PRODUCT_RELEASE), /* bcdDevice (LSB) */
+ MSB(PRODUCT_RELEASE), /* bcdDevice (MSB) */
+ STRING_OFFSET_IMANUFACTURER, /* iManufacturer */
+ STRING_OFFSET_IPRODUCT, /* iProduct */
+ STRING_OFFSET_ISERIAL, /* iSerialNumber */
+ 0x01 /* bNumConfigurations */
+ };
+ return deviceDescriptor;
+}
+
+uint8_t * USBDevice::stringLangidDesc() {
+ static uint8_t stringLangidDescriptor[] = {
+ 0x04, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ 0x09,0x00, /*bString Lang ID - 0x009 - English*/
+ };
+ return stringLangidDescriptor;
+}
+
+uint8_t * USBDevice::stringImanufacturerDesc() {
+ static uint8_t stringImanufacturerDescriptor[] = {
+ 0x12, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ 'm',0,'b',0,'e',0,'d',0,'.',0,'o',0,'r',0,'g',0, /*bString iManufacturer - mbed.org*/
+ };
+ return stringImanufacturerDescriptor;
+}
+
+uint8_t * USBDevice::stringIserialDesc() {
+ static uint8_t stringIserialDescriptor[] = {
+ 0x16, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ '0',0,'1',0,'2',0,'3',0,'4',0,'5',0,'6',0,'7',0,'8',0,'9',0, /*bString iSerial - 0123456789*/
+ };
+ return stringIserialDescriptor;
+}
+
+uint8_t * USBDevice::stringIConfigurationDesc() {
+ static uint8_t stringIconfigurationDescriptor[] = {
+ 0x06, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ '0',0,'1',0, /*bString iConfiguration - 01*/
+ };
+ return stringIconfigurationDescriptor;
+}
+
+uint8_t * USBDevice::stringIinterfaceDesc() {
+ static uint8_t stringIinterfaceDescriptor[] = {
+ 0x08, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ 'U',0,'S',0,'B',0, /*bString iInterface - USB*/
+ };
+ return stringIinterfaceDescriptor;
+}
+
+uint8_t * USBDevice::stringIproductDesc() {
+ static uint8_t stringIproductDescriptor[] = {
+ 0x16, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ 'U',0,'S',0,'B',0,' ',0,'D',0,'E',0,'V',0,'I',0,'C',0,'E',0 /*bString iProduct - USB DEVICE*/
+ };
+ return stringIproductDescriptor;
+}
diff -r 000000000000 -r ecc3925d3f8c USBDevice/USBDevice.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBDevice.h Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,269 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBDEVICE_H
+#define USBDEVICE_H
+
+#include "mbed.h"
+#include "USBDevice_Types.h"
+#include "USBHAL.h"
+
+class USBDevice: public USBHAL
+{
+public:
+ USBDevice(uint16_t vendor_id, uint16_t product_id, uint16_t product_release);
+
+ /*
+ * Check if the device is configured
+ *
+ * @returns true if configured, false otherwise
+ */
+ bool configured(void);
+
+ /*
+ * Connect a device
+ */
+ void connect(void);
+
+ /*
+ * Disconnect a device
+ */
+ void disconnect(void);
+
+ /*
+ * Add an endpoint
+ *
+ * @param endpoint endpoint which will be added
+ * @param maxPacket Maximum size of a packet which can be sent for this endpoint
+ * @returns true if successful, false otherwise
+ */
+ bool addEndpoint(uint8_t endpoint, uint32_t maxPacket);
+
+ /*
+ * Start a reading on a certain endpoint.
+ * You can access the result of the reading by USBDevice_read
+ *
+ * @param endpoint endpoint which will be read
+ * @param maxSize the maximum length that can be read
+ * @return true if successful
+ */
+ bool readStart(uint8_t endpoint, uint32_t maxSize);
+
+ /*
+ * Read a certain endpoint. Before calling this function, USBUSBDevice_readStart
+ * must be called.
+ *
+ * Warning: blocking
+ *
+ * @param endpoint endpoint which will be read
+ * @param buffer buffer will be filled with the data received
+ * @param size the number of bytes read will be stored in *size
+ * @param maxSize the maximum length that can be read
+ * @returns true if successful
+ */
+ bool readEP(uint8_t endpoint, uint8_t * buffer, uint32_t * size, uint32_t maxSize);
+
+ /*
+ * Read a certain endpoint.
+ *
+ * Warning: non blocking
+ *
+ * @param endpoint endpoint which will be read
+ * @param buffer buffer will be filled with the data received (if data are available)
+ * @param size the number of bytes read will be stored in *size
+ * @param maxSize the maximum length that can be read
+ * @returns true if successful
+ */
+ bool readEP_NB(uint8_t endpoint, uint8_t * buffer, uint32_t * size, uint32_t maxSize);
+
+ /*
+ * Write a certain endpoint.
+ *
+ * Warning: blocking
+ *
+ * @param endpoint endpoint to write
+ * @param buffer data contained in buffer will be write
+ * @param size the number of bytes to write
+ * @param maxSize the maximum length that can be written on this endpoint
+ */
+ bool write(uint8_t endpoint, uint8_t * buffer, uint32_t size, uint32_t maxSize);
+
+
+ /*
+ * Write a certain endpoint.
+ *
+ * Warning: non blocking
+ *
+ * @param endpoint endpoint to write
+ * @param buffer data contained in buffer will be write
+ * @param size the number of bytes to write
+ * @param maxSize the maximum length that can be written on this endpoint
+ */
+ bool writeNB(uint8_t endpoint, uint8_t * buffer, uint32_t size, uint32_t maxSize);
+
+
+ /*
+ * Called by USBDevice layer on bus reset. Warning: Called in ISR context
+ *
+ * May be used to reset state
+ */
+ virtual void USBCallback_busReset(void) {};
+
+ /*
+ * Called by USBDevice on Endpoint0 request. Warning: Called in ISR context
+ * This is used to handle extensions to standard requests
+ * and class specific requests
+ *
+ * @returns true if class handles this request
+ */
+ virtual bool USBCallback_request() { return false; };
+
+ /*
+ * Called by USBDevice on Endpoint0 request completion
+ * if the 'notify' flag has been set to true. Warning: Called in ISR context
+ *
+ * In this case it is used to indicate that a HID report has
+ * been received from the host on endpoint 0
+ *
+ * @param buf buffer received on endpoint 0
+ * @param length length of this buffer
+ */
+ virtual void USBCallback_requestCompleted(uint8_t * buf, uint32_t length) {};
+
+ /*
+ * Called by USBDevice layer. Set configuration of the device.
+ * For instance, you can add all endpoints that you need on this function.
+ *
+ * @param configuration Number of the configuration
+ */
+ virtual bool USBCallback_setConfiguration(uint8_t configuration) { return false; };
+
+ /*
+ * Called by USBDevice layer. Set interface/alternate of the device.
+ *
+ * @param interface Number of the interface to be configured
+ * @param alternate Number of the alternate to be configured
+ * @returns true if class handles this request
+ */
+ virtual bool USBCallback_setInterface(uint16_t interface, uint8_t alternate) { return false; };
+
+ /*
+ * Get device descriptor. Warning: this method has to store the length of the report descriptor in reportLength.
+ *
+ * @returns pointer to the device descriptor
+ */
+ virtual uint8_t * deviceDesc();
+
+ /*
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc(){return NULL;};
+
+ /*
+ * Get string lang id descriptor
+ *
+ * @return pointer to the string lang id descriptor
+ */
+ virtual uint8_t * stringLangidDesc();
+
+ /*
+ * Get string manufacturer descriptor
+ *
+ * @returns pointer to the string manufacturer descriptor
+ */
+ virtual uint8_t * stringImanufacturerDesc();
+
+ /*
+ * Get string product descriptor
+ *
+ * @returns pointer to the string product descriptor
+ */
+ virtual uint8_t * stringIproductDesc();
+
+ /*
+ * Get string serial descriptor
+ *
+ * @returns pointer to the string serial descriptor
+ */
+ virtual uint8_t * stringIserialDesc();
+
+ /*
+ * Get string configuration descriptor
+ *
+ * @returns pointer to the string configuration descriptor
+ */
+ virtual uint8_t * stringIConfigurationDesc();
+
+ /*
+ * Get string interface descriptor
+ *
+ * @returns pointer to the string interface descriptor
+ */
+ virtual uint8_t * stringIinterfaceDesc();
+
+ /*
+ * Get the length of the report descriptor
+ *
+ * @returns length of the report descriptor
+ */
+ virtual uint16_t reportDescLength() { return 0; };
+
+
+
+protected:
+ virtual void busReset(void);
+ virtual void EP0setupCallback(void);
+ virtual void EP0out(void);
+ virtual void EP0in(void);
+ virtual void connectStateChanged(unsigned int connected);
+ virtual void suspendStateChanged(unsigned int suspended);
+ uint8_t * findDescriptor(uint8_t descriptorType);
+ CONTROL_TRANSFER * getTransferPtr(void);
+
+ uint16_t VENDOR_ID;
+ uint16_t PRODUCT_ID;
+ uint16_t PRODUCT_RELEASE;
+
+private:
+ bool addRateFeedbackEndpoint(uint8_t endpoint, uint32_t maxPacket);
+ bool requestGetDescriptor(void);
+ bool controlOut(void);
+ bool controlIn(void);
+ bool requestSetAddress(void);
+ bool requestSetConfiguration(void);
+ bool requestSetFeature(void);
+ bool requestClearFeature(void);
+ bool requestGetStatus(void);
+ bool requestSetup(void);
+ bool controlSetup(void);
+ void decodeSetupPacket(uint8_t *data, SETUP_PACKET *packet);
+ bool requestGetConfiguration(void);
+ bool requestGetInterface(void);
+ bool requestSetInterface(void);
+
+ CONTROL_TRANSFER transfer;
+ USB_DEVICE device;
+
+ uint16_t currentInterface;
+ uint8_t currentAlternate;
+};
+
+
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBDevice/USBDevice_Types.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBDevice_Types.h Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,83 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBDEVICE_TYPES_H
+#define USBDEVICE_TYPES_H
+
+/* Standard requests */
+#define GET_STATUS (0)
+#define CLEAR_FEATURE (1)
+#define SET_FEATURE (3)
+#define SET_ADDRESS (5)
+#define GET_DESCRIPTOR (6)
+#define SET_DESCRIPTOR (7)
+#define GET_CONFIGURATION (8)
+#define SET_CONFIGURATION (9)
+#define GET_INTERFACE (10)
+#define SET_INTERFACE (11)
+
+/* bmRequestType.dataTransferDirection */
+#define HOST_TO_DEVICE (0)
+#define DEVICE_TO_HOST (1)
+
+/* bmRequestType.Type*/
+#define STANDARD_TYPE (0)
+#define CLASS_TYPE (1)
+#define VENDOR_TYPE (2)
+#define RESERVED_TYPE (3)
+
+/* bmRequestType.Recipient */
+#define DEVICE_RECIPIENT (0)
+#define INTERFACE_RECIPIENT (1)
+#define ENDPOINT_RECIPIENT (2)
+#define OTHER_RECIPIENT (3)
+
+/* Descriptors */
+#define DESCRIPTOR_TYPE(wValue) (wValue >> 8)
+#define DESCRIPTOR_INDEX(wValue) (wValue & 0xf)
+
+typedef struct {
+ struct {
+ uint8_t dataTransferDirection;
+ uint8_t Type;
+ uint8_t Recipient;
+ } bmRequestType;
+ uint8_t bRequest;
+ uint16_t wValue;
+ uint16_t wIndex;
+ uint16_t wLength;
+} SETUP_PACKET;
+
+typedef struct {
+ SETUP_PACKET setup;
+ uint8_t *ptr;
+ uint32_t remaining;
+ uint8_t direction;
+ bool zlp;
+ bool notify;
+} CONTROL_TRANSFER;
+
+typedef enum {ATTACHED, POWERED, DEFAULT, ADDRESS, CONFIGURED} DEVICE_STATE;
+
+typedef struct {
+ volatile DEVICE_STATE state;
+ uint8_t configuration;
+ bool suspended;
+} USB_DEVICE;
+
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBDevice/USBEndpoints.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBEndpoints.h Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,50 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBENDPOINTS_H
+#define USBENDPOINTS_H
+
+/* SETUP packet size */
+#define SETUP_PACKET_SIZE (8)
+
+/* Options flags for configuring endpoints */
+#define DEFAULT_OPTIONS (0)
+#define SINGLE_BUFFERED (1U << 0)
+#define ISOCHRONOUS (1U << 1)
+#define RATE_FEEDBACK_MODE (1U << 2) /* Interrupt endpoints only */
+
+/* Endpoint transfer status, for endpoints > 0 */
+typedef enum {
+ EP_COMPLETED, /* Transfer completed */
+ EP_PENDING, /* Transfer in progress */
+ EP_INVALID, /* Invalid parameter */
+ EP_STALLED, /* Endpoint stalled */
+} EP_STATUS;
+
+/* Include configuration for specific target */
+#if defined(TARGET_LPC1768) || defined(TARGET_LPC2368)
+#include "USBEndpoints_LPC17_LPC23.h"
+#elif defined(TARGET_LPC11U24)
+#include "USBEndpoints_LPC11U.h"
+#elif defined(TARGET_KL25Z)
+#include "USBEndpoints_KL25Z.h"
+#else
+#error "Unknown target type"
+#endif
+
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBDevice/USBEndpoints_KL25Z.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBEndpoints_KL25Z.h Tue May 24 13:16:55 2016 +0000 @@ -0,0 +1,93 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#define NUMBER_OF_LOGICAL_ENDPOINTS (16) +#define NUMBER_OF_PHYSICAL_ENDPOINTS (NUMBER_OF_LOGICAL_ENDPOINTS * 2) + +/* Define physical endpoint numbers */ + +/* Endpoint No. */ +/* ---------------- */ +#define EP0OUT (0) +#define EP0IN (1) +#define EP1OUT (2) +#define EP1IN (3) +#define EP2OUT (4) +#define EP2IN (5) +#define EP3OUT (6) +#define EP3IN (7) +#define EP4OUT (8) +#define EP4IN (9) +#define EP5OUT (10) +#define EP5IN (11) +#define EP6OUT (12) +#define EP6IN (13) +#define EP7OUT (14) +#define EP7IN (15) +#define EP8OUT (16) +#define EP8IN (17) +#define EP9OUT (18) +#define EP9IN (19) +#define EP10OUT (20) +#define EP10IN (21) +#define EP11OUT (22) +#define EP11IN (23) +#define EP12OUT (24) +#define EP12IN (25) +#define EP13OUT (26) +#define EP13IN (27) +#define EP14OUT (28) +#define EP14IN (29) +#define EP15OUT (30) +#define EP15IN (31) + +/* Maximum Packet sizes */ + +#define MAX_PACKET_SIZE_EP0 (64) +#define MAX_PACKET_SIZE_EP1 (64) +#define MAX_PACKET_SIZE_EP2 (64) +#define MAX_PACKET_SIZE_EP3 (1023) +#define MAX_PACKET_SIZE_EP4 (64) +#define MAX_PACKET_SIZE_EP5 (64) +#define MAX_PACKET_SIZE_EP6 (64) +#define MAX_PACKET_SIZE_EP7 (64) +#define MAX_PACKET_SIZE_EP8 (64) +#define MAX_PACKET_SIZE_EP9 (64) +#define MAX_PACKET_SIZE_EP10 (64) +#define MAX_PACKET_SIZE_EP11 (64) +#define MAX_PACKET_SIZE_EP12 (64) +#define MAX_PACKET_SIZE_EP13 (64) +#define MAX_PACKET_SIZE_EP14 (64) +#define MAX_PACKET_SIZE_EP15 (64) + +/* Generic endpoints - intended to be portable accross devices */ +/* and be suitable for simple USB devices. */ + +/* Bulk endpoints */ +#define EPBULK_OUT (EP2OUT) +#define EPBULK_IN (EP2IN) +/* Interrupt endpoints */ +#define EPINT_OUT (EP1OUT) +#define EPINT_IN (EP1IN) +/* Isochronous endpoints */ +#define EPISO_OUT (EP3OUT) +#define EPISO_IN (EP3IN) + +#define MAX_PACKET_SIZE_EPBULK (MAX_PACKET_SIZE_EP2) +#define MAX_PACKET_SIZE_EPINT (MAX_PACKET_SIZE_EP1) +#define MAX_PACKET_SIZE_EPISO (MAX_PACKET_SIZE_EP3)
diff -r 000000000000 -r ecc3925d3f8c USBDevice/USBEndpoints_LPC11U.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBEndpoints_LPC11U.h Tue May 24 13:16:55 2016 +0000 @@ -0,0 +1,65 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#define NUMBER_OF_LOGICAL_ENDPOINTS (5) +#define NUMBER_OF_PHYSICAL_ENDPOINTS (NUMBER_OF_LOGICAL_ENDPOINTS * 2) + +/* Define physical endpoint numbers */ + +/* Endpoint No. Type(s) MaxPacket DoubleBuffer */ +/* ---------------- ------------ ---------- --- */ +#define EP0OUT (0) /* Control 64 No */ +#define EP0IN (1) /* Control 64 No */ +#define EP1OUT (2) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP1IN (3) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP2OUT (4) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP2IN (5) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP3OUT (6) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP3IN (7) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP4OUT (8) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP4IN (9) /* Int/Bulk/Iso 64/64/1023 Yes */ + +/* Maximum Packet sizes */ + +#define MAX_PACKET_SIZE_EP0 (64) +#define MAX_PACKET_SIZE_EP1 (64) /* Int/Bulk */ +#define MAX_PACKET_SIZE_EP2 (64) /* Int/Bulk */ +#define MAX_PACKET_SIZE_EP3 (64) /* Int/Bulk */ +#define MAX_PACKET_SIZE_EP4 (64) /* Int/Bulk */ + +#define MAX_PACKET_SIZE_EP1_ISO (1023) /* Isochronous */ +#define MAX_PACKET_SIZE_EP2_ISO (1023) /* Isochronous */ +#define MAX_PACKET_SIZE_EP3_ISO (1023) /* Isochronous */ +#define MAX_PACKET_SIZE_EP4_ISO (1023) /* Isochronous */ + +/* Generic endpoints - intended to be portable accross devices */ +/* and be suitable for simple USB devices. */ + +/* Bulk endpoint */ +#define EPBULK_OUT (EP2OUT) +#define EPBULK_IN (EP2IN) +/* Interrupt endpoint */ +#define EPINT_OUT (EP1OUT) +#define EPINT_IN (EP1IN) +/* Isochronous endpoint */ +#define EPISO_OUT (EP3OUT) +#define EPISO_IN (EP3IN) + +#define MAX_PACKET_SIZE_EPBULK (MAX_PACKET_SIZE_EP2) +#define MAX_PACKET_SIZE_EPINT (MAX_PACKET_SIZE_EP1) +#define MAX_PACKET_SIZE_EPISO (MAX_PACKET_SIZE_EP3_ISO)
diff -r 000000000000 -r ecc3925d3f8c USBDevice/USBEndpoints_LPC17_LPC23.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBEndpoints_LPC17_LPC23.h Tue May 24 13:16:55 2016 +0000 @@ -0,0 +1,93 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#define NUMBER_OF_LOGICAL_ENDPOINTS (16) +#define NUMBER_OF_PHYSICAL_ENDPOINTS (NUMBER_OF_LOGICAL_ENDPOINTS * 2) + +/* Define physical endpoint numbers */ + +/* Endpoint No. Type(s) MaxPacket DoubleBuffer */ +/* ---------------- ------------ ---------- --- */ +#define EP0OUT (0) /* Control 64 No */ +#define EP0IN (1) /* Control 64 No */ +#define EP1OUT (2) /* Interrupt 64 No */ +#define EP1IN (3) /* Interrupt 64 No */ +#define EP2OUT (4) /* Bulk 64 Yes */ +#define EP2IN (5) /* Bulk 64 Yes */ +#define EP3OUT (6) /* Isochronous 1023 Yes */ +#define EP3IN (7) /* Isochronous 1023 Yes */ +#define EP4OUT (8) /* Interrupt 64 No */ +#define EP4IN (9) /* Interrupt 64 No */ +#define EP5OUT (10) /* Bulk 64 Yes */ +#define EP5IN (11) /* Bulk 64 Yes */ +#define EP6OUT (12) /* Isochronous 1023 Yes */ +#define EP6IN (13) /* Isochronous 1023 Yes */ +#define EP7OUT (14) /* Interrupt 64 No */ +#define EP7IN (15) /* Interrupt 64 No */ +#define EP8OUT (16) /* Bulk 64 Yes */ +#define EP8IN (17) /* Bulk 64 Yes */ +#define EP9OUT (18) /* Isochronous 1023 Yes */ +#define EP9IN (19) /* Isochronous 1023 Yes */ +#define EP10OUT (20) /* Interrupt 64 No */ +#define EP10IN (21) /* Interrupt 64 No */ +#define EP11OUT (22) /* Bulk 64 Yes */ +#define EP11IN (23) /* Bulk 64 Yes */ +#define EP12OUT (24) /* Isochronous 1023 Yes */ +#define EP12IN (25) /* Isochronous 1023 Yes */ +#define EP13OUT (26) /* Interrupt 64 No */ +#define EP13IN (27) /* Interrupt 64 No */ +#define EP14OUT (28) /* Bulk 64 Yes */ +#define EP14IN (29) /* Bulk 64 Yes */ +#define EP15OUT (30) /* Bulk 64 Yes */ +#define EP15IN (31) /* Bulk 64 Yes */ + +/* Maximum Packet sizes */ + +#define MAX_PACKET_SIZE_EP0 (64) +#define MAX_PACKET_SIZE_EP1 (64) +#define MAX_PACKET_SIZE_EP2 (64) +#define MAX_PACKET_SIZE_EP3 (1023) +#define MAX_PACKET_SIZE_EP4 (64) +#define MAX_PACKET_SIZE_EP5 (64) +#define MAX_PACKET_SIZE_EP6 (1023) +#define MAX_PACKET_SIZE_EP7 (64) +#define MAX_PACKET_SIZE_EP8 (64) +#define MAX_PACKET_SIZE_EP9 (1023) +#define MAX_PACKET_SIZE_EP10 (64) +#define MAX_PACKET_SIZE_EP11 (64) +#define MAX_PACKET_SIZE_EP12 (1023) +#define MAX_PACKET_SIZE_EP13 (64) +#define MAX_PACKET_SIZE_EP14 (64) +#define MAX_PACKET_SIZE_EP15 (64) + +/* Generic endpoints - intended to be portable accross devices */ +/* and be suitable for simple USB devices. */ + +/* Bulk endpoints */ +#define EPBULK_OUT (EP2OUT) +#define EPBULK_IN (EP2IN) +/* Interrupt endpoints */ +#define EPINT_OUT (EP1OUT) +#define EPINT_IN (EP1IN) +/* Isochronous endpoints */ +#define EPISO_OUT (EP3OUT) +#define EPISO_IN (EP3IN) + +#define MAX_PACKET_SIZE_EPBULK (MAX_PACKET_SIZE_EP2) +#define MAX_PACKET_SIZE_EPINT (MAX_PACKET_SIZE_EP1) +#define MAX_PACKET_SIZE_EPISO (MAX_PACKET_SIZE_EP3)
diff -r 000000000000 -r ecc3925d3f8c USBDevice/USBHAL.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBHAL.h Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,113 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBBUSINTERFACE_H
+#define USBBUSINTERFACE_H
+
+#include "mbed.h"
+#include "USBEndpoints.h"
+
+class USBHAL {
+public:
+ /* Configuration */
+ USBHAL();
+ ~USBHAL();
+ void connect(void);
+ void disconnect(void);
+ void configureDevice(void);
+ void unconfigureDevice(void);
+ void setAddress(uint8_t address);
+ void remoteWakeup(void);
+
+ /* Endpoint 0 */
+ void EP0setup(uint8_t *buffer);
+ void EP0read(void);
+ void EP0readStage(void);
+ uint32_t EP0getReadResult(uint8_t *buffer);
+ void EP0write(uint8_t *buffer, uint32_t size);
+ void EP0getWriteResult(void);
+ void EP0stall(void);
+
+ /* Other endpoints */
+ EP_STATUS endpointRead(uint8_t endpoint, uint32_t maximumSize);
+ EP_STATUS endpointReadResult(uint8_t endpoint, uint8_t *data, uint32_t *bytesRead);
+ EP_STATUS endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size);
+ EP_STATUS endpointWriteResult(uint8_t endpoint);
+ void stallEndpoint(uint8_t endpoint);
+ void unstallEndpoint(uint8_t endpoint);
+ bool realiseEndpoint(uint8_t endpoint, uint32_t maxPacket, uint32_t options);
+ bool getEndpointStallState(unsigned char endpoint);
+ uint32_t endpointReadcore(uint8_t endpoint, uint8_t *buffer);
+
+protected:
+ virtual void busReset(void){};
+ virtual void EP0setupCallback(void){};
+ virtual void EP0out(void){};
+ virtual void EP0in(void){};
+ virtual void connectStateChanged(unsigned int connected){};
+ virtual void suspendStateChanged(unsigned int suspended){};
+ virtual void SOF(int frameNumber){};
+
+ virtual bool EP1_OUT_callback(){return false;};
+ virtual bool EP1_IN_callback(){return false;};
+ virtual bool EP2_OUT_callback(){return false;};
+ virtual bool EP2_IN_callback(){return false;};
+ virtual bool EP3_OUT_callback(){return false;};
+ virtual bool EP3_IN_callback(){return false;};
+ virtual bool EP4_OUT_callback(){return false;};
+ virtual bool EP4_IN_callback(){return false;};
+
+#if !defined(TARGET_LPC11U24)
+ virtual bool EP5_OUT_callback(){return false;};
+ virtual bool EP5_IN_callback(){return false;};
+ virtual bool EP6_OUT_callback(){return false;};
+ virtual bool EP6_IN_callback(){return false;};
+ virtual bool EP7_OUT_callback(){return false;};
+ virtual bool EP7_IN_callback(){return false;};
+ virtual bool EP8_OUT_callback(){return false;};
+ virtual bool EP8_IN_callback(){return false;};
+ virtual bool EP9_OUT_callback(){return false;};
+ virtual bool EP9_IN_callback(){return false;};
+ virtual bool EP10_OUT_callback(){return false;};
+ virtual bool EP10_IN_callback(){return false;};
+ virtual bool EP11_OUT_callback(){return false;};
+ virtual bool EP11_IN_callback(){return false;};
+ virtual bool EP12_OUT_callback(){return false;};
+ virtual bool EP12_IN_callback(){return false;};
+ virtual bool EP13_OUT_callback(){return false;};
+ virtual bool EP13_IN_callback(){return false;};
+ virtual bool EP14_OUT_callback(){return false;};
+ virtual bool EP14_IN_callback(){return false;};
+ virtual bool EP15_OUT_callback(){return false;};
+ virtual bool EP15_IN_callback(){return false;};
+#endif
+
+private:
+ void usbisr(void);
+ static void _usbisr(void);
+ static USBHAL * instance;
+
+#if defined(TARGET_LPC11U24)
+ bool (USBHAL::*epCallback[10 - 2])(void);
+#else
+ bool (USBHAL::*epCallback[32 - 2])(void);
+#endif
+
+
+};
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBDevice/USBHAL_KL25Z.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBHAL_KL25Z.cpp Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,514 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#if defined(TARGET_KL25Z)
+
+#include "USBHAL.h"
+
+USBHAL * USBHAL::instance;
+
+static volatile int epComplete = 0;
+
+// Convert physical endpoint number to register bit
+#define EP(endpoint) (1<<(endpoint))
+
+// Convert physical to logical
+#define PHY_TO_LOG(endpoint) ((endpoint)>>1)
+
+// Get endpoint direction
+#define IN_EP(endpoint) ((endpoint) & 1U ? true : false)
+#define OUT_EP(endpoint) ((endpoint) & 1U ? false : true)
+
+#define BD_OWN_MASK (1<<7)
+#define BD_DATA01_MASK (1<<6)
+#define BD_KEEP_MASK (1<<5)
+#define BD_NINC_MASK (1<<4)
+#define BD_DTS_MASK (1<<3)
+#define BD_STALL_MASK (1<<2)
+
+#define TX 1
+#define RX 0
+#define ODD 0
+#define EVEN 1
+// this macro waits a physical endpoint number
+#define EP_BDT_IDX(ep, dir, odd) (((ep * 4) + (2 * dir) + (1 * odd)))
+
+#define SETUP_TOKEN 0x0D
+#define IN_TOKEN 0x09
+#define OUT_TOKEN 0x01
+#define TOK_PID(idx) ((bdt[idx].info >> 2) & 0x0F)
+
+// for each endpt: 8 bytes
+typedef struct BDT {
+ uint8_t info; // BD[0:7]
+ uint8_t dummy; // RSVD: BD[8:15]
+ uint16_t byte_count; // BD[16:32]
+ uint32_t address; // Addr
+} BDT;
+
+
+// there are:
+// * 16 bidirectionnal endpt -> 32 physical endpt
+// * as there are ODD and EVEN buffer -> 32*2 bdt
+__attribute__((__aligned__(512))) BDT bdt[NUMBER_OF_PHYSICAL_ENDPOINTS * 2];
+uint8_t endpoint_buffer[(NUMBER_OF_PHYSICAL_ENDPOINTS - 2) * 2][64];
+uint8_t endpoint_buffer_iso[2*2][1023];
+
+static uint8_t set_addr = 0;
+static uint8_t addr = 0;
+
+static uint32_t Data1 = 0x55555555;
+
+static uint32_t frameNumber() {
+ return((USB0->FRMNUML | (USB0->FRMNUMH << 8) & 0x07FF));
+}
+
+uint32_t USBHAL::endpointReadcore(uint8_t endpoint, uint8_t *buffer) {
+ return 0;
+}
+
+USBHAL::USBHAL(void) {
+ // Disable IRQ
+ NVIC_DisableIRQ(USB0_IRQn);
+
+ // fill in callback array
+ epCallback[0] = &USBHAL::EP1_OUT_callback;
+ epCallback[1] = &USBHAL::EP1_IN_callback;
+ epCallback[2] = &USBHAL::EP2_OUT_callback;
+ epCallback[3] = &USBHAL::EP2_IN_callback;
+ epCallback[4] = &USBHAL::EP3_OUT_callback;
+ epCallback[5] = &USBHAL::EP3_IN_callback;
+ epCallback[6] = &USBHAL::EP4_OUT_callback;
+ epCallback[7] = &USBHAL::EP4_IN_callback;
+ epCallback[8] = &USBHAL::EP5_OUT_callback;
+ epCallback[9] = &USBHAL::EP5_IN_callback;
+ epCallback[10] = &USBHAL::EP6_OUT_callback;
+ epCallback[11] = &USBHAL::EP6_IN_callback;
+ epCallback[12] = &USBHAL::EP7_OUT_callback;
+ epCallback[13] = &USBHAL::EP7_IN_callback;
+ epCallback[14] = &USBHAL::EP8_OUT_callback;
+ epCallback[15] = &USBHAL::EP8_IN_callback;
+ epCallback[16] = &USBHAL::EP9_OUT_callback;
+ epCallback[17] = &USBHAL::EP9_IN_callback;
+ epCallback[18] = &USBHAL::EP10_OUT_callback;
+ epCallback[19] = &USBHAL::EP10_IN_callback;
+ epCallback[20] = &USBHAL::EP11_OUT_callback;
+ epCallback[21] = &USBHAL::EP11_IN_callback;
+ epCallback[22] = &USBHAL::EP12_OUT_callback;
+ epCallback[23] = &USBHAL::EP12_IN_callback;
+ epCallback[24] = &USBHAL::EP13_OUT_callback;
+ epCallback[25] = &USBHAL::EP13_IN_callback;
+ epCallback[26] = &USBHAL::EP14_OUT_callback;
+ epCallback[27] = &USBHAL::EP14_IN_callback;
+ epCallback[28] = &USBHAL::EP15_OUT_callback;
+ epCallback[29] = &USBHAL::EP15_IN_callback;
+
+
+ // choose usb src as PLL
+ SIM->SOPT2 |= (SIM_SOPT2_USBSRC_MASK | SIM_SOPT2_PLLFLLSEL_MASK);
+
+ // enable OTG clock
+ SIM->SCGC4 |= SIM_SCGC4_USBOTG_MASK;
+
+ // Attach IRQ
+ instance = this;
+ NVIC_SetVector(USB0_IRQn, (uint32_t)&_usbisr);
+ NVIC_EnableIRQ(USB0_IRQn);
+
+ // USB Module Configuration
+ // Reset USB Module
+ USB0->USBTRC0 |= USB_USBTRC0_USBRESET_MASK;
+ while(USB0->USBTRC0 & USB_USBTRC0_USBRESET_MASK);
+
+ // Set BDT Base Register
+ USB0->BDTPAGE1=(uint8_t)((uint32_t)bdt>>8);
+ USB0->BDTPAGE2=(uint8_t)((uint32_t)bdt>>16);
+ USB0->BDTPAGE3=(uint8_t)((uint32_t)bdt>>24);
+
+ // Clear interrupt flag
+ USB0->ISTAT = 0xff;
+
+ // USB Interrupt Enablers
+ USB0->INTEN |= USB_INTEN_TOKDNEEN_MASK |
+ USB_INTEN_SOFTOKEN_MASK |
+ USB_INTEN_ERROREN_MASK |
+ USB_INTEN_USBRSTEN_MASK;
+
+ // Disable weak pull downs
+ USB0->USBCTRL &= ~(USB_USBCTRL_PDE_MASK | USB_USBCTRL_SUSP_MASK);
+
+ USB0->USBTRC0 |= 0x40;
+}
+
+USBHAL::~USBHAL(void) { }
+
+void USBHAL::connect(void) {
+ // enable USB
+ USB0->CTL |= USB_CTL_USBENSOFEN_MASK;
+ // Pull up enable
+ USB0->CONTROL |= USB_CONTROL_DPPULLUPNONOTG_MASK;
+}
+
+void USBHAL::disconnect(void) {
+ // disable USB
+ USB0->CTL &= ~USB_CTL_USBENSOFEN_MASK;
+ // Pull up disable
+ USB0->CONTROL &= ~USB_CONTROL_DPPULLUPNONOTG_MASK;
+}
+
+void USBHAL::configureDevice(void) {
+ // not needed
+}
+
+void USBHAL::unconfigureDevice(void) {
+ // not needed
+}
+
+void USBHAL::setAddress(uint8_t address) {
+ // we don't set the address now otherwise the usb controller does not ack
+ // we set a flag instead
+ // see usbisr when an IN token is received
+ set_addr = 1;
+ addr = address;
+}
+
+bool USBHAL::realiseEndpoint(uint8_t endpoint, uint32_t maxPacket, uint32_t flags) {
+ uint32_t handshake_flag = 0;
+ uint8_t * buf;
+
+ if (endpoint > NUMBER_OF_PHYSICAL_ENDPOINTS - 1) {
+ return false;
+ }
+
+ uint32_t log_endpoint = PHY_TO_LOG(endpoint);
+
+ if ((flags & ISOCHRONOUS) == 0) {
+ handshake_flag = USB_ENDPT_EPHSHK_MASK;
+ if (IN_EP(endpoint))
+ buf = &endpoint_buffer[EP_BDT_IDX(log_endpoint, TX, ODD )][0];
+ else
+ buf = &endpoint_buffer[EP_BDT_IDX(log_endpoint, RX, ODD )][0];
+ } else {
+ if (IN_EP(endpoint))
+ buf = &endpoint_buffer_iso[2][0];
+ else
+ buf = &endpoint_buffer_iso[0][0];
+ }
+
+ // IN endpt -> device to host (TX)
+ if (IN_EP(endpoint)) {
+ USB0->ENDPOINT[log_endpoint].ENDPT |= handshake_flag | // ep handshaking (not if iso endpoint)
+ USB_ENDPT_EPTXEN_MASK; // en TX (IN) tran
+ bdt[EP_BDT_IDX(log_endpoint, TX, ODD )].address = (uint32_t) buf;
+ bdt[EP_BDT_IDX(log_endpoint, TX, EVEN)].address = 0;
+ }
+ // OUT endpt -> host to device (RX)
+ else {
+ USB0->ENDPOINT[log_endpoint].ENDPT |= handshake_flag | // ep handshaking (not if iso endpoint)
+ USB_ENDPT_EPRXEN_MASK; // en RX (OUT) tran.
+ bdt[EP_BDT_IDX(log_endpoint, RX, ODD )].byte_count = maxPacket;
+ bdt[EP_BDT_IDX(log_endpoint, RX, ODD )].address = (uint32_t) buf;
+ bdt[EP_BDT_IDX(log_endpoint, RX, ODD )].info = BD_OWN_MASK | BD_DTS_MASK;
+ bdt[EP_BDT_IDX(log_endpoint, RX, EVEN)].info = 0;
+ }
+
+ Data1 |= (1 << endpoint);
+
+ return true;
+}
+
+// read setup packet
+void USBHAL::EP0setup(uint8_t *buffer) {
+ uint32_t sz;
+ endpointReadResult(EP0OUT, buffer, &sz);
+}
+
+void USBHAL::EP0readStage(void) {
+ Data1 &= ~1UL; // set DATA0
+ bdt[0].info = (BD_DTS_MASK | BD_OWN_MASK);
+}
+
+void USBHAL::EP0read(void) {
+ uint32_t idx = EP_BDT_IDX(PHY_TO_LOG(EP0OUT), RX, 0);
+ bdt[idx].byte_count = MAX_PACKET_SIZE_EP0;
+}
+
+uint32_t USBHAL::EP0getReadResult(uint8_t *buffer) {
+ uint32_t sz;
+ endpointReadResult(EP0OUT, buffer, &sz);
+ return sz;
+}
+
+void USBHAL::EP0write(uint8_t *buffer, uint32_t size) {
+ endpointWrite(EP0IN, buffer, size);
+}
+
+void USBHAL::EP0getWriteResult(void) {
+}
+
+void USBHAL::EP0stall(void) {
+ stallEndpoint(EP0OUT);
+}
+
+EP_STATUS USBHAL::endpointRead(uint8_t endpoint, uint32_t maximumSize) {
+ endpoint = PHY_TO_LOG(endpoint);
+ uint32_t idx = EP_BDT_IDX(endpoint, RX, 0);
+ bdt[idx].byte_count = maximumSize;
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointReadResult(uint8_t endpoint, uint8_t * buffer, uint32_t *bytesRead) {
+ uint32_t n, sz, idx, setup = 0;
+ uint8_t not_iso;
+ uint8_t * ep_buf;
+
+ uint32_t log_endpoint = PHY_TO_LOG(endpoint);
+
+ if (endpoint > NUMBER_OF_PHYSICAL_ENDPOINTS - 1) {
+ return EP_INVALID;
+ }
+
+ // if read on a IN endpoint -> error
+ if (IN_EP(endpoint)) {
+ return EP_INVALID;
+ }
+
+ idx = EP_BDT_IDX(log_endpoint, RX, 0);
+ sz = bdt[idx].byte_count;
+ not_iso = USB0->ENDPOINT[log_endpoint].ENDPT & USB_ENDPT_EPHSHK_MASK;
+
+ //for isochronous endpoint, we don't wait an interrupt
+ if ((log_endpoint != 0) && not_iso && !(epComplete & EP(endpoint))) {
+ return EP_PENDING;
+ }
+
+ if ((log_endpoint == 0) && (TOK_PID(idx) == SETUP_TOKEN)) {
+ setup = 1;
+ }
+
+ // non iso endpoint
+ if (not_iso) {
+ ep_buf = endpoint_buffer[idx];
+ } else {
+ ep_buf = endpoint_buffer_iso[0];
+ }
+
+ for (n = 0; n < sz; n++) {
+ buffer[n] = ep_buf[n];
+ }
+
+ if (((Data1 >> endpoint) & 1) == ((bdt[idx].info >> 6) & 1)) {
+ if (setup && (buffer[6] == 0)) // if no setup data stage,
+ Data1 &= ~1UL; // set DATA0
+ else
+ Data1 ^= (1 << endpoint);
+ }
+
+ if (((Data1 >> endpoint) & 1)) {
+ bdt[idx].info = BD_DTS_MASK | BD_DATA01_MASK | BD_OWN_MASK;
+ }
+ else {
+ bdt[idx].info = BD_DTS_MASK | BD_OWN_MASK;
+ }
+
+ USB0->CTL &= ~USB_CTL_TXSUSPENDTOKENBUSY_MASK;
+ *bytesRead = sz;
+
+ epComplete &= ~EP(endpoint);
+ return EP_COMPLETED;
+}
+
+EP_STATUS USBHAL::endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size) {
+ uint32_t idx, n;
+ uint8_t * ep_buf;
+
+ if (endpoint > NUMBER_OF_PHYSICAL_ENDPOINTS - 1) {
+ return EP_INVALID;
+ }
+
+ // if write on a OUT endpoint -> error
+ if (OUT_EP(endpoint)) {
+ return EP_INVALID;
+ }
+
+ idx = EP_BDT_IDX(PHY_TO_LOG(endpoint), TX, 0);
+ bdt[idx].byte_count = size;
+
+
+ // non iso endpoint
+ if (USB0->ENDPOINT[PHY_TO_LOG(endpoint)].ENDPT & USB_ENDPT_EPHSHK_MASK) {
+ ep_buf = endpoint_buffer[idx];
+ } else {
+ ep_buf = endpoint_buffer_iso[2];
+ }
+
+ for (n = 0; n < size; n++) {
+ ep_buf[n] = data[n];
+ }
+
+ if ((Data1 >> endpoint) & 1) {
+ bdt[idx].info = BD_OWN_MASK | BD_DTS_MASK;
+ } else {
+ bdt[idx].info = BD_OWN_MASK | BD_DTS_MASK | BD_DATA01_MASK;
+ }
+
+ Data1 ^= (1 << endpoint);
+
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointWriteResult(uint8_t endpoint) {
+ if (epComplete & EP(endpoint)) {
+ epComplete &= ~EP(endpoint);
+ return EP_COMPLETED;
+ }
+
+ return EP_PENDING;
+}
+
+void USBHAL::stallEndpoint(uint8_t endpoint) {
+ USB0->ENDPOINT[PHY_TO_LOG(endpoint)].ENDPT |= USB_ENDPT_EPSTALL_MASK;
+}
+
+void USBHAL::unstallEndpoint(uint8_t endpoint) {
+ USB0->ENDPOINT[PHY_TO_LOG(endpoint)].ENDPT &= ~USB_ENDPT_EPSTALL_MASK;
+}
+
+bool USBHAL::getEndpointStallState(uint8_t endpoint) {
+ uint8_t stall = (USB0->ENDPOINT[PHY_TO_LOG(endpoint)].ENDPT & USB_ENDPT_EPSTALL_MASK);
+ return (stall) ? true : false;
+}
+
+void USBHAL::remoteWakeup(void) {
+ // [TODO]
+}
+
+
+void USBHAL::_usbisr(void) {
+ instance->usbisr();
+}
+
+
+void USBHAL::usbisr(void) {
+ uint8_t i;
+ uint8_t istat = USB0->ISTAT;
+
+ // reset interrupt
+ if (istat & USB_ISTAT_USBRST_MASK) {
+ // disable all endpt
+ for(i = 0; i < 16; i++) {
+ USB0->ENDPOINT[i].ENDPT = 0x00;
+ }
+
+ // enable control endpoint
+ realiseEndpoint(EP0OUT, MAX_PACKET_SIZE_EP0, 0);
+ realiseEndpoint(EP0IN, MAX_PACKET_SIZE_EP0, 0);
+
+ Data1 = 0x55555555;
+ USB0->CTL |= USB_CTL_ODDRST_MASK;
+
+ USB0->ISTAT = 0xFF; // clear all interrupt status flags
+ USB0->ERRSTAT = 0xFF; // clear all error flags
+ USB0->ERREN = 0xFF; // enable error interrupt sources
+ USB0->ADDR = 0x00; // set default address
+
+ return;
+ }
+
+ // resume interrupt
+ if (istat & USB_ISTAT_RESUME_MASK) {
+ USB0->ISTAT = USB_ISTAT_RESUME_MASK;
+ }
+
+ // SOF interrupt
+ if (istat & USB_ISTAT_SOFTOK_MASK) {
+ USB0->ISTAT = USB_ISTAT_SOFTOK_MASK;
+ // SOF event, read frame number
+ SOF(frameNumber());
+ }
+
+ // stall interrupt
+ if (istat & 1<<7) {
+ if (USB0->ENDPOINT[0].ENDPT & USB_ENDPT_EPSTALL_MASK)
+ USB0->ENDPOINT[0].ENDPT &= ~USB_ENDPT_EPSTALL_MASK;
+ USB0->ISTAT |= USB_ISTAT_STALL_MASK;
+ }
+
+ // token interrupt
+ if (istat & 1<<3) {
+ uint32_t num = (USB0->STAT >> 4) & 0x0F;
+ uint32_t dir = (USB0->STAT >> 3) & 0x01;
+ uint32_t ev_odd = (USB0->STAT >> 2) & 0x01;
+
+ // setup packet
+ if ((num == 0) && (TOK_PID((EP_BDT_IDX(num, dir, ev_odd))) == SETUP_TOKEN)) {
+ Data1 &= ~0x02;
+ bdt[EP_BDT_IDX(0, TX, EVEN)].info &= ~BD_OWN_MASK;
+ bdt[EP_BDT_IDX(0, TX, ODD)].info &= ~BD_OWN_MASK;
+
+ // EP0 SETUP event (SETUP data received)
+ EP0setupCallback();
+
+ } else {
+ // OUT packet
+ if (TOK_PID((EP_BDT_IDX(num, dir, ev_odd))) == OUT_TOKEN) {
+ if (num == 0)
+ EP0out();
+ else {
+ epComplete |= (1 << EP(num));
+ if ((instance->*(epCallback[EP(num) - 2]))()) {
+ epComplete &= ~(1 << EP(num));
+ }
+ }
+ }
+
+ // IN packet
+ if (TOK_PID((EP_BDT_IDX(num, dir, ev_odd))) == IN_TOKEN) {
+ if (num == 0) {
+ EP0in();
+ if (set_addr == 1) {
+ USB0->ADDR = addr & 0x7F;
+ set_addr = 0;
+ }
+ }
+ else {
+ epComplete |= (1 << (EP(num) + 1));
+ if ((instance->*(epCallback[EP(num) + 1 - 2]))()) {
+ epComplete &= ~(1 << (EP(num) + 1));
+ }
+ }
+ }
+ }
+
+ USB0->ISTAT = USB_ISTAT_TOKDNE_MASK;
+ }
+
+ // sleep interrupt
+ if (istat & 1<<4) {
+ USB0->ISTAT |= USB_ISTAT_SLEEP_MASK;
+ }
+
+ // error interrupt
+ if (istat & USB_ISTAT_ERROR_MASK) {
+ USB0->ERRSTAT = 0xFF;
+ USB0->ISTAT |= USB_ISTAT_ERROR_MASK;
+ }
+}
+
+
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBDevice/USBHAL_LPC11U.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBHAL_LPC11U.cpp Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,684 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifdef TARGET_LPC11U24
+
+#include "USBHAL.h"
+
+USBHAL * USBHAL::instance;
+
+// Valid physical endpoint numbers are 0 to (NUMBER_OF_PHYSICAL_ENDPOINTS-1)
+#define LAST_PHYSICAL_ENDPOINT (NUMBER_OF_PHYSICAL_ENDPOINTS-1)
+
+// Convert physical endpoint number to register bit
+#define EP(endpoint) (1UL<<endpoint)
+
+// Convert physical to logical
+#define PHY_TO_LOG(endpoint) ((endpoint)>>1)
+
+// Get endpoint direction
+#define IN_EP(endpoint) ((endpoint) & 1U ? true : false)
+#define OUT_EP(endpoint) ((endpoint) & 1U ? false : true)
+
+// USB RAM
+#define USB_RAM_START (0x20004000)
+#define USB_RAM_SIZE (0x00000800)
+
+// SYSAHBCLKCTRL
+#define CLK_USB (1UL<<14)
+#define CLK_USBRAM (1UL<<27)
+
+// USB Information register
+#define FRAME_NR(a) ((a) & 0x7ff) // Frame number
+
+// USB Device Command/Status register
+#define DEV_ADDR_MASK (0x7f) // Device address
+#define DEV_ADDR(a) ((a) & DEV_ADDR_MASK)
+#define DEV_EN (1UL<<7) // Device enable
+#define SETUP (1UL<<8) // SETUP token received
+#define PLL_ON (1UL<<9) // PLL enabled in suspend
+#define DCON (1UL<<16) // Device status - connect
+#define DSUS (1UL<<17) // Device status - suspend
+#define DCON_C (1UL<<24) // Connect change
+#define DSUS_C (1UL<<25) // Suspend change
+#define DRES_C (1UL<<26) // Reset change
+#define VBUSDEBOUNCED (1UL<<28) // Vbus detected
+
+// Endpoint Command/Status list
+#define CMDSTS_A (1UL<<31) // Active
+#define CMDSTS_D (1UL<<30) // Disable
+#define CMDSTS_S (1UL<<29) // Stall
+#define CMDSTS_TR (1UL<<28) // Toggle Reset
+#define CMDSTS_RF (1UL<<27) // Rate Feedback mode
+#define CMDSTS_TV (1UL<<27) // Toggle Value
+#define CMDSTS_T (1UL<<26) // Endpoint Type
+#define CMDSTS_NBYTES(n) (((n)&0x3ff)<<16) // Number of bytes
+#define CMDSTS_ADDRESS_OFFSET(a) (((a)>>6)&0xffff) // Buffer start address
+
+#define BYTES_REMAINING(s) (((s)>>16)&0x3ff) // Bytes remaining after transfer
+
+// USB Non-endpoint interrupt sources
+#define FRAME_INT (1UL<<30)
+#define DEV_INT (1UL<<31)
+
+static volatile int epComplete = 0;
+
+// One entry for a double-buffered logical endpoint in the endpoint
+// command/status list. Endpoint 0 is single buffered, out[1] is used
+// for the SETUP packet and in[1] is not used
+typedef __packed struct {
+ uint32_t out[2];
+ uint32_t in[2];
+} EP_COMMAND_STATUS;
+
+typedef __packed struct {
+ uint8_t out[MAX_PACKET_SIZE_EP0];
+ uint8_t in[MAX_PACKET_SIZE_EP0];
+ uint8_t setup[SETUP_PACKET_SIZE];
+} CONTROL_TRANSFER;
+
+typedef __packed struct {
+ uint32_t maxPacket;
+ uint32_t buffer[2];
+ uint32_t options;
+} EP_STATE;
+
+static volatile EP_STATE endpointState[NUMBER_OF_PHYSICAL_ENDPOINTS];
+
+// Pointer to the endpoint command/status list
+static EP_COMMAND_STATUS *ep = NULL;
+
+// Pointer to endpoint 0 data (IN/OUT and SETUP)
+static CONTROL_TRANSFER *ct = NULL;
+
+// Shadow DEVCMDSTAT register to avoid accidentally clearing flags or
+// initiating a remote wakeup event.
+static volatile uint32_t devCmdStat;
+
+// Pointers used to allocate USB RAM
+static uint32_t usbRamPtr = USB_RAM_START;
+static uint32_t epRamPtr = 0; // Buffers for endpoints > 0 start here
+
+#define ROUND_UP_TO_MULTIPLE(x, m) ((((x)+((m)-1))/(m))*(m))
+
+void USBMemCopy(uint8_t *dst, uint8_t *src, uint32_t size);
+void USBMemCopy(uint8_t *dst, uint8_t *src, uint32_t size) {
+ if (size > 0) {
+ do {
+ *dst++ = *src++;
+ } while (--size > 0);
+ }
+}
+
+
+USBHAL::USBHAL(void) {
+ NVIC_DisableIRQ(USB_IRQn);
+
+ // fill in callback array
+ epCallback[0] = &USBHAL::EP1_OUT_callback;
+ epCallback[1] = &USBHAL::EP1_IN_callback;
+ epCallback[2] = &USBHAL::EP2_OUT_callback;
+ epCallback[3] = &USBHAL::EP2_IN_callback;
+ epCallback[4] = &USBHAL::EP3_OUT_callback;
+ epCallback[5] = &USBHAL::EP3_IN_callback;
+ epCallback[6] = &USBHAL::EP4_OUT_callback;
+ epCallback[7] = &USBHAL::EP4_IN_callback;
+
+ // nUSB_CONNECT output
+ LPC_IOCON->PIO0_6 = 0x00000001;
+
+ // Enable clocks (USB registers, USB RAM)
+ LPC_SYSCON->SYSAHBCLKCTRL |= CLK_USB | CLK_USBRAM;
+
+ // Ensure device disconnected (DCON not set)
+ LPC_USB->DEVCMDSTAT = 0;
+
+ // to ensure that the USB host sees the device as
+ // disconnected if the target CPU is reset.
+ wait(0.3);
+
+ // Reserve space in USB RAM for endpoint command/status list
+ // Must be 256 byte aligned
+ usbRamPtr = ROUND_UP_TO_MULTIPLE(usbRamPtr, 256);
+ ep = (EP_COMMAND_STATUS *)usbRamPtr;
+ usbRamPtr += (sizeof(EP_COMMAND_STATUS) * NUMBER_OF_LOGICAL_ENDPOINTS);
+ LPC_USB->EPLISTSTART = (uint32_t)(ep) & 0xffffff00;
+
+ // Reserve space in USB RAM for Endpoint 0
+ // Must be 64 byte aligned
+ usbRamPtr = ROUND_UP_TO_MULTIPLE(usbRamPtr, 64);
+ ct = (CONTROL_TRANSFER *)usbRamPtr;
+ usbRamPtr += sizeof(CONTROL_TRANSFER);
+ LPC_USB->DATABUFSTART =(uint32_t)(ct) & 0xffc00000;
+
+ // Setup command/status list for EP0
+ ep[0].out[0] = 0;
+ ep[0].in[0] = 0;
+ ep[0].out[1] = CMDSTS_ADDRESS_OFFSET((uint32_t)ct->setup);
+
+ // Route all interrupts to IRQ, some can be routed to
+ // USB_FIQ if you wish.
+ LPC_USB->INTROUTING = 0;
+
+ // Set device address 0, enable USB device, no remote wakeup
+ devCmdStat = DEV_ADDR(0) | DEV_EN | DSUS;
+ LPC_USB->DEVCMDSTAT = devCmdStat;
+
+ // Enable interrupts for device events and EP0
+ LPC_USB->INTEN = DEV_INT | EP(EP0IN) | EP(EP0OUT) | FRAME_INT;
+ instance = this;
+
+ //attach IRQ handler and enable interrupts
+ NVIC_SetVector(USB_IRQn, (uint32_t)&_usbisr);
+}
+
+USBHAL::~USBHAL(void) {
+ // Ensure device disconnected (DCON not set)
+ LPC_USB->DEVCMDSTAT = 0;
+ // Disable USB interrupts
+ NVIC_DisableIRQ(USB_IRQn);
+}
+
+void USBHAL::connect(void) {
+ NVIC_EnableIRQ(USB_IRQn);
+ devCmdStat |= DCON;
+ LPC_USB->DEVCMDSTAT = devCmdStat;
+}
+
+void USBHAL::disconnect(void) {
+ NVIC_DisableIRQ(USB_IRQn);
+ devCmdStat &= ~DCON;
+ LPC_USB->DEVCMDSTAT = devCmdStat;
+}
+
+void USBHAL::configureDevice(void) {
+ // Not required
+}
+
+void USBHAL::unconfigureDevice(void) {
+ // Not required
+}
+
+void USBHAL::EP0setup(uint8_t *buffer) {
+ // Copy setup packet data
+ USBMemCopy(buffer, ct->setup, SETUP_PACKET_SIZE);
+}
+
+void USBHAL::EP0read(void) {
+ // Start an endpoint 0 read
+
+ // The USB ISR will call USBDevice_EP0out() when a packet has been read,
+ // the USBDevice layer then calls USBBusInterface_EP0getReadResult() to
+ // read the data.
+
+ ep[0].out[0] = CMDSTS_A |CMDSTS_NBYTES(MAX_PACKET_SIZE_EP0) \
+ | CMDSTS_ADDRESS_OFFSET((uint32_t)ct->out);
+}
+
+uint32_t USBHAL::EP0getReadResult(uint8_t *buffer) {
+ // Complete an endpoint 0 read
+ uint32_t bytesRead;
+
+ // Find how many bytes were read
+ bytesRead = MAX_PACKET_SIZE_EP0 - BYTES_REMAINING(ep[0].out[0]);
+
+ // Copy data
+ USBMemCopy(buffer, ct->out, bytesRead);
+ return bytesRead;
+}
+
+
+void USBHAL::EP0readStage(void) {
+ // Not required
+}
+
+void USBHAL::EP0write(uint8_t *buffer, uint32_t size) {
+ // Start and endpoint 0 write
+
+ // The USB ISR will call USBDevice_EP0in() when the data has
+ // been written, the USBDevice layer then calls
+ // USBBusInterface_EP0getWriteResult() to complete the transaction.
+
+ // Copy data
+ USBMemCopy(ct->in, buffer, size);
+
+ // Start transfer
+ ep[0].in[0] = CMDSTS_A | CMDSTS_NBYTES(size) \
+ | CMDSTS_ADDRESS_OFFSET((uint32_t)ct->in);
+}
+
+
+EP_STATUS USBHAL::endpointRead(uint8_t endpoint, uint32_t maximumSize) {
+ uint8_t bf = 0;
+ uint32_t flags = 0;
+
+ //check which buffer must be filled
+ if (LPC_USB->EPBUFCFG & EP(endpoint)) {
+ // Double buffered
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ bf = 1;
+ } else {
+ bf = 0;
+ }
+ }
+
+ // if isochronous endpoint, T = 1
+ if(endpointState[endpoint].options & ISOCHRONOUS)
+ {
+ flags |= CMDSTS_T;
+ }
+
+ //Active the endpoint for reading
+ ep[PHY_TO_LOG(endpoint)].out[bf] = CMDSTS_A | CMDSTS_NBYTES(maximumSize) \
+ | CMDSTS_ADDRESS_OFFSET((uint32_t)ct->out) | flags;
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointReadResult(uint8_t endpoint, uint8_t *data, uint32_t *bytesRead) {
+
+ uint8_t bf = 0;
+
+ if (!(epComplete & EP(endpoint)))
+ return EP_PENDING;
+ else {
+ epComplete &= ~EP(endpoint);
+
+ //check which buffer has been filled
+ if (LPC_USB->EPBUFCFG & EP(endpoint)) {
+ // Double buffered (here we read the previous buffer which was used)
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ bf = 0;
+ } else {
+ bf = 1;
+ }
+ }
+
+ // Find how many bytes were read
+ *bytesRead = (uint32_t) (endpointState[endpoint].maxPacket - BYTES_REMAINING(ep[PHY_TO_LOG(endpoint)].out[bf]));
+
+ // Copy data
+ USBMemCopy(data, ct->out, *bytesRead);
+ return EP_COMPLETED;
+ }
+}
+
+void USBHAL::EP0getWriteResult(void) {
+ // Not required
+}
+
+void USBHAL::EP0stall(void) {
+ ep[0].in[0] = CMDSTS_S;
+ ep[0].out[0] = CMDSTS_S;
+}
+
+void USBHAL::setAddress(uint8_t address) {
+ devCmdStat &= ~DEV_ADDR_MASK;
+ devCmdStat |= DEV_ADDR(address);
+ LPC_USB->DEVCMDSTAT = devCmdStat;
+}
+
+EP_STATUS USBHAL::endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size) {
+ uint32_t flags = 0;
+ uint32_t bf;
+
+ // Validate parameters
+ if (data == NULL) {
+ return EP_INVALID;
+ }
+
+ if (endpoint > LAST_PHYSICAL_ENDPOINT) {
+ return EP_INVALID;
+ }
+
+ if ((endpoint==EP0IN) || (endpoint==EP0OUT)) {
+ return EP_INVALID;
+ }
+
+ if (size > endpointState[endpoint].maxPacket) {
+ return EP_INVALID;
+ }
+
+ if (LPC_USB->EPBUFCFG & EP(endpoint)) {
+ // Double buffered
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ bf = 1;
+ } else {
+ bf = 0;
+ }
+ } else {
+ // Single buffered
+ bf = 0;
+ }
+
+ // Check if already active
+ if (ep[PHY_TO_LOG(endpoint)].in[bf] & CMDSTS_A) {
+ return EP_INVALID;
+ }
+
+ // Check if stalled
+ if (ep[PHY_TO_LOG(endpoint)].in[bf] & CMDSTS_S) {
+ return EP_STALLED;
+ }
+
+ // Copy data to USB RAM
+ USBMemCopy((uint8_t *)endpointState[endpoint].buffer[bf], data, size);
+
+ // Add options
+ if (endpointState[endpoint].options & RATE_FEEDBACK_MODE) {
+ flags |= CMDSTS_RF;
+ }
+
+ if (endpointState[endpoint].options & ISOCHRONOUS) {
+ flags |= CMDSTS_T;
+ }
+
+ // Add transfer
+ ep[PHY_TO_LOG(endpoint)].in[bf] = CMDSTS_ADDRESS_OFFSET( \
+ endpointState[endpoint].buffer[bf]) \
+ | CMDSTS_NBYTES(size) | CMDSTS_A | flags;
+
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointWriteResult(uint8_t endpoint) {
+ uint32_t bf;
+
+ // Validate parameters
+ if (endpoint > LAST_PHYSICAL_ENDPOINT) {
+ return EP_INVALID;
+ }
+
+ if (OUT_EP(endpoint)) {
+ return EP_INVALID;
+ }
+
+ if (LPC_USB->EPBUFCFG & EP(endpoint)) {
+ // Double buffered // TODO: FIX THIS
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ bf = 1;
+ } else {
+ bf = 0;
+ }
+ } else {
+ // Single buffered
+ bf = 0;
+ }
+
+ // Check if endpoint still active
+ if (ep[PHY_TO_LOG(endpoint)].in[bf] & CMDSTS_A) {
+ return EP_PENDING;
+ }
+
+ // Check if stalled
+ if (ep[PHY_TO_LOG(endpoint)].in[bf] & CMDSTS_S) {
+ return EP_STALLED;
+ }
+
+ return EP_COMPLETED;
+}
+
+void USBHAL::stallEndpoint(uint8_t endpoint) {
+
+ // FIX: should this clear active bit?
+ if (IN_EP(endpoint)) {
+ ep[PHY_TO_LOG(endpoint)].in[0] |= CMDSTS_S;
+ ep[PHY_TO_LOG(endpoint)].in[1] |= CMDSTS_S;
+ } else {
+ ep[PHY_TO_LOG(endpoint)].out[0] |= CMDSTS_S;
+ ep[PHY_TO_LOG(endpoint)].out[1] |= CMDSTS_S;
+ }
+}
+
+void USBHAL::unstallEndpoint(uint8_t endpoint) {
+ if (LPC_USB->EPBUFCFG & EP(endpoint)) {
+ // Double buffered
+ if (IN_EP(endpoint)) {
+ ep[PHY_TO_LOG(endpoint)].in[0] = 0; // S = 0
+ ep[PHY_TO_LOG(endpoint)].in[1] = 0; // S = 0
+
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ ep[PHY_TO_LOG(endpoint)].in[1] = CMDSTS_TR; // S = 0, TR = 1, TV = 0
+ } else {
+ ep[PHY_TO_LOG(endpoint)].in[0] = CMDSTS_TR; // S = 0, TR = 1, TV = 0
+ }
+ } else {
+ ep[PHY_TO_LOG(endpoint)].out[0] = 0; // S = 0
+ ep[PHY_TO_LOG(endpoint)].out[1] = 0; // S = 0
+
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ ep[PHY_TO_LOG(endpoint)].out[1] = CMDSTS_TR; // S = 0, TR = 1, TV = 0
+ } else {
+ ep[PHY_TO_LOG(endpoint)].out[0] = CMDSTS_TR; // S = 0, TR = 1, TV = 0
+ }
+ }
+ } else {
+ // Single buffered
+ if (IN_EP(endpoint)) {
+ ep[PHY_TO_LOG(endpoint)].in[0] = CMDSTS_TR; // S = 0, TR = 1, TV = 0
+ } else {
+ ep[PHY_TO_LOG(endpoint)].out[0] = CMDSTS_TR; // S = 0, TR = 1, TV = 0
+ }
+ }
+}
+
+bool USBHAL::getEndpointStallState(unsigned char endpoint) {
+ if (IN_EP(endpoint)) {
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ if (ep[PHY_TO_LOG(endpoint)].in[1] & CMDSTS_S) {
+ return true;
+ }
+ } else {
+ if (ep[PHY_TO_LOG(endpoint)].in[0] & CMDSTS_S) {
+ return true;
+ }
+ }
+ } else {
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ if (ep[PHY_TO_LOG(endpoint)].out[1] & CMDSTS_S) {
+ return true;
+ }
+ } else {
+ if (ep[PHY_TO_LOG(endpoint)].out[0] & CMDSTS_S) {
+ return true;
+ }
+ }
+ }
+
+ return false;
+}
+
+bool USBHAL::realiseEndpoint(uint8_t endpoint, uint32_t maxPacket, uint32_t options) {
+ uint32_t tmpEpRamPtr;
+
+ if (endpoint > LAST_PHYSICAL_ENDPOINT) {
+ return false;
+ }
+
+ // Not applicable to the control endpoints
+ if ((endpoint==EP0IN) || (endpoint==EP0OUT)) {
+ return false;
+ }
+
+ // Allocate buffers in USB RAM
+ tmpEpRamPtr = epRamPtr;
+
+ // Must be 64 byte aligned
+ tmpEpRamPtr = ROUND_UP_TO_MULTIPLE(tmpEpRamPtr, 64);
+
+ if ((tmpEpRamPtr + maxPacket) > (USB_RAM_START + USB_RAM_SIZE)) {
+ // Out of memory
+ return false;
+ }
+
+ // Allocate first buffer
+ endpointState[endpoint].buffer[0] = tmpEpRamPtr;
+ tmpEpRamPtr += maxPacket;
+
+ if (!(options & SINGLE_BUFFERED)) {
+ // Must be 64 byte aligned
+ tmpEpRamPtr = ROUND_UP_TO_MULTIPLE(tmpEpRamPtr, 64);
+
+ if ((tmpEpRamPtr + maxPacket) > (USB_RAM_START + USB_RAM_SIZE)) {
+ // Out of memory
+ return false;
+ }
+
+ // Allocate second buffer
+ endpointState[endpoint].buffer[1] = tmpEpRamPtr;
+ tmpEpRamPtr += maxPacket;
+ }
+
+ // Commit to this USB RAM allocation
+ epRamPtr = tmpEpRamPtr;
+
+ // Remaining endpoint state values
+ endpointState[endpoint].maxPacket = maxPacket;
+ endpointState[endpoint].options = options;
+
+ // Enable double buffering if required
+ if (options & SINGLE_BUFFERED) {
+ LPC_USB->EPBUFCFG &= ~EP(endpoint);
+ } else {
+ // Double buffered
+ LPC_USB->EPBUFCFG |= EP(endpoint);
+ }
+
+ // Enable interrupt
+ LPC_USB->INTEN |= EP(endpoint);
+
+ // Enable endpoint
+ unstallEndpoint(endpoint);
+ return true;
+}
+
+void USBHAL::remoteWakeup(void) {
+ // Clearing DSUS bit initiates a remote wakeup if the
+ // device is currently enabled and suspended - otherwise
+ // it has no effect.
+ LPC_USB->DEVCMDSTAT = devCmdStat & ~DSUS;
+}
+
+
+static void disableEndpoints(void) {
+ uint32_t logEp;
+
+ // Ref. Table 158 "When a bus reset is received, software
+ // must set the disable bit of all endpoints to 1".
+
+ for (logEp = 1; logEp < NUMBER_OF_LOGICAL_ENDPOINTS; logEp++) {
+ ep[logEp].out[0] = CMDSTS_D;
+ ep[logEp].out[1] = CMDSTS_D;
+ ep[logEp].in[0] = CMDSTS_D;
+ ep[logEp].in[1] = CMDSTS_D;
+ }
+
+ // Start of USB RAM for endpoints > 0
+ epRamPtr = usbRamPtr;
+}
+
+
+
+void USBHAL::_usbisr(void) {
+ instance->usbisr();
+}
+
+void USBHAL::usbisr(void) {
+ // Start of frame
+ if (LPC_USB->INTSTAT & FRAME_INT) {
+ // Clear SOF interrupt
+ LPC_USB->INTSTAT = FRAME_INT;
+
+ // SOF event, read frame number
+ SOF(FRAME_NR(LPC_USB->INFO));
+ }
+
+ // Device state
+ if (LPC_USB->INTSTAT & DEV_INT) {
+ LPC_USB->INTSTAT = DEV_INT;
+
+ if (LPC_USB->DEVCMDSTAT & DSUS_C) {
+ // Suspend status changed
+ LPC_USB->DEVCMDSTAT = devCmdStat | DSUS_C;
+ if((LPC_USB->DEVCMDSTAT & DSUS) != 0) {
+ suspendStateChanged(1);
+ }
+ }
+
+ if (LPC_USB->DEVCMDSTAT & DRES_C) {
+ // Bus reset
+ LPC_USB->DEVCMDSTAT = devCmdStat | DRES_C;
+
+ suspendStateChanged(0);
+
+ // Disable endpoints > 0
+ disableEndpoints();
+
+ // Bus reset event
+ busReset();
+ }
+ }
+
+ // Endpoint 0
+ if (LPC_USB->INTSTAT & EP(EP0OUT)) {
+ // Clear EP0OUT/SETUP interrupt
+ LPC_USB->INTSTAT = EP(EP0OUT);
+
+ // Check if SETUP
+ if (LPC_USB->DEVCMDSTAT & SETUP) {
+ // Clear Active and Stall bits for EP0
+ // Documentation does not make it clear if we must use the
+ // EPSKIP register to achieve this, Fig. 16 and NXP reference
+ // code suggests we can just clear the Active bits - check with
+ // NXP to be sure.
+ ep[0].in[0] = 0;
+ ep[0].out[0] = 0;
+
+ // Clear EP0IN interrupt
+ LPC_USB->INTSTAT = EP(EP0IN);
+
+ // Clear SETUP (and INTONNAK_CI/O) in device status register
+ LPC_USB->DEVCMDSTAT = devCmdStat | SETUP;
+
+ // EP0 SETUP event (SETUP data received)
+ EP0setupCallback();
+ } else {
+ // EP0OUT ACK event (OUT data received)
+ EP0out();
+ }
+ }
+
+ if (LPC_USB->INTSTAT & EP(EP0IN)) {
+ // Clear EP0IN interrupt
+ LPC_USB->INTSTAT = EP(EP0IN);
+
+ // EP0IN ACK event (IN data sent)
+ EP0in();
+ }
+
+ for (uint8_t num = 2; num < 5*2; num++) {
+ if (LPC_USB->INTSTAT & EP(num)) {
+ LPC_USB->INTSTAT = EP(num);
+ epComplete |= EP(num);
+ if ((instance->*(epCallback[num - 2]))()) {
+ epComplete &= ~EP(num);
+ }
+ }
+ }
+}
+
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBDevice/USBHAL_LPC17.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/USBHAL_LPC17.cpp Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,623 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#if defined(TARGET_LPC1768) || defined(TARGET_LPC2368)
+
+#include "USBHAL.h"
+
+
+// Get endpoint direction
+#define IN_EP(endpoint) ((endpoint) & 1U ? true : false)
+#define OUT_EP(endpoint) ((endpoint) & 1U ? false : true)
+
+// Convert physical endpoint number to register bit
+#define EP(endpoint) (1UL<<endpoint)
+
+// Power Control for Peripherals register
+#define PCUSB (1UL<<31)
+
+// USB Clock Control register
+#define DEV_CLK_EN (1UL<<1)
+#define AHB_CLK_EN (1UL<<4)
+
+// USB Clock Status register
+#define DEV_CLK_ON (1UL<<1)
+#define AHB_CLK_ON (1UL<<4)
+
+// USB Device Interupt registers
+#define FRAME (1UL<<0)
+#define EP_FAST (1UL<<1)
+#define EP_SLOW (1UL<<2)
+#define DEV_STAT (1UL<<3)
+#define CCEMPTY (1UL<<4)
+#define CDFULL (1UL<<5)
+#define RxENDPKT (1UL<<6)
+#define TxENDPKT (1UL<<7)
+#define EP_RLZED (1UL<<8)
+#define ERR_INT (1UL<<9)
+
+// USB Control register
+#define RD_EN (1<<0)
+#define WR_EN (1<<1)
+#define LOG_ENDPOINT(endpoint) ((endpoint>>1)<<2)
+
+// USB Receive Packet Length register
+#define DV (1UL<<10)
+#define PKT_RDY (1UL<<11)
+#define PKT_LNGTH_MASK (0x3ff)
+
+// Serial Interface Engine (SIE)
+#define SIE_WRITE (0x01)
+#define SIE_READ (0x02)
+#define SIE_COMMAND (0x05)
+#define SIE_CMD_CODE(phase, data) ((phase<<8)|(data<<16))
+
+// SIE Command codes
+#define SIE_CMD_SET_ADDRESS (0xD0)
+#define SIE_CMD_CONFIGURE_DEVICE (0xD8)
+#define SIE_CMD_SET_MODE (0xF3)
+#define SIE_CMD_READ_FRAME_NUMBER (0xF5)
+#define SIE_CMD_READ_TEST_REGISTER (0xFD)
+#define SIE_CMD_SET_DEVICE_STATUS (0xFE)
+#define SIE_CMD_GET_DEVICE_STATUS (0xFE)
+#define SIE_CMD_GET_ERROR_CODE (0xFF)
+#define SIE_CMD_READ_ERROR_STATUS (0xFB)
+
+#define SIE_CMD_SELECT_ENDPOINT(endpoint) (0x00+endpoint)
+#define SIE_CMD_SELECT_ENDPOINT_CLEAR_INTERRUPT(endpoint) (0x40+endpoint)
+#define SIE_CMD_SET_ENDPOINT_STATUS(endpoint) (0x40+endpoint)
+
+#define SIE_CMD_CLEAR_BUFFER (0xF2)
+#define SIE_CMD_VALIDATE_BUFFER (0xFA)
+
+// SIE Device Status register
+#define SIE_DS_CON (1<<0)
+#define SIE_DS_CON_CH (1<<1)
+#define SIE_DS_SUS (1<<2)
+#define SIE_DS_SUS_CH (1<<3)
+#define SIE_DS_RST (1<<4)
+
+// SIE Device Set Address register
+#define SIE_DSA_DEV_EN (1<<7)
+
+// SIE Configue Device register
+#define SIE_CONF_DEVICE (1<<0)
+
+// Select Endpoint register
+#define SIE_SE_FE (1<<0)
+#define SIE_SE_ST (1<<1)
+#define SIE_SE_STP (1<<2)
+#define SIE_SE_PO (1<<3)
+#define SIE_SE_EPN (1<<4)
+#define SIE_SE_B_1_FULL (1<<5)
+#define SIE_SE_B_2_FULL (1<<6)
+
+// Set Endpoint Status command
+#define SIE_SES_ST (1<<0)
+#define SIE_SES_DA (1<<5)
+#define SIE_SES_RF_MO (1<<6)
+#define SIE_SES_CND_ST (1<<7)
+
+
+USBHAL * USBHAL::instance;
+
+static volatile int epComplete;
+static uint32_t endpointStallState;
+
+static void SIECommand(uint32_t command) {
+ // The command phase of a SIE transaction
+ LPC_USB->USBDevIntClr = CCEMPTY;
+ LPC_USB->USBCmdCode = SIE_CMD_CODE(SIE_COMMAND, command);
+ while (!(LPC_USB->USBDevIntSt & CCEMPTY));
+}
+
+static void SIEWriteData(uint8_t data) {
+ // The data write phase of a SIE transaction
+ LPC_USB->USBDevIntClr = CCEMPTY;
+ LPC_USB->USBCmdCode = SIE_CMD_CODE(SIE_WRITE, data);
+ while (!(LPC_USB->USBDevIntSt & CCEMPTY));
+}
+
+static uint8_t SIEReadData(uint32_t command) {
+ // The data read phase of a SIE transaction
+ LPC_USB->USBDevIntClr = CDFULL;
+ LPC_USB->USBCmdCode = SIE_CMD_CODE(SIE_READ, command);
+ while (!(LPC_USB->USBDevIntSt & CDFULL));
+ return (uint8_t)LPC_USB->USBCmdData;
+}
+
+static void SIEsetDeviceStatus(uint8_t status) {
+ // Write SIE device status register
+ SIECommand(SIE_CMD_SET_DEVICE_STATUS);
+ SIEWriteData(status);
+}
+
+static uint8_t SIEgetDeviceStatus(void) {
+ // Read SIE device status register
+ SIECommand(SIE_CMD_GET_DEVICE_STATUS);
+ return SIEReadData(SIE_CMD_GET_DEVICE_STATUS);
+}
+
+void SIEsetAddress(uint8_t address) {
+ // Write SIE device address register
+ SIECommand(SIE_CMD_SET_ADDRESS);
+ SIEWriteData((address & 0x7f) | SIE_DSA_DEV_EN);
+}
+
+static uint8_t SIEselectEndpoint(uint8_t endpoint) {
+ // SIE select endpoint command
+ SIECommand(SIE_CMD_SELECT_ENDPOINT(endpoint));
+ return SIEReadData(SIE_CMD_SELECT_ENDPOINT(endpoint));
+}
+
+static uint8_t SIEclearBuffer(void) {
+ // SIE clear buffer command
+ SIECommand(SIE_CMD_CLEAR_BUFFER);
+ return SIEReadData(SIE_CMD_CLEAR_BUFFER);
+}
+
+static void SIEvalidateBuffer(void) {
+ // SIE validate buffer command
+ SIECommand(SIE_CMD_VALIDATE_BUFFER);
+}
+
+static void SIEsetEndpointStatus(uint8_t endpoint, uint8_t status) {
+ // SIE set endpoint status command
+ SIECommand(SIE_CMD_SET_ENDPOINT_STATUS(endpoint));
+ SIEWriteData(status);
+}
+
+static uint16_t SIEgetFrameNumber(void) __attribute__ ((unused));
+static uint16_t SIEgetFrameNumber(void) {
+ // Read current frame number
+ uint16_t lowByte;
+ uint16_t highByte;
+
+ SIECommand(SIE_CMD_READ_FRAME_NUMBER);
+ lowByte = SIEReadData(SIE_CMD_READ_FRAME_NUMBER);
+ highByte = SIEReadData(SIE_CMD_READ_FRAME_NUMBER);
+
+ return (highByte << 8) | lowByte;
+}
+
+static void SIEconfigureDevice(void) {
+ // SIE Configure device command
+ SIECommand(SIE_CMD_CONFIGURE_DEVICE);
+ SIEWriteData(SIE_CONF_DEVICE);
+}
+
+static void SIEunconfigureDevice(void) {
+ // SIE Configure device command
+ SIECommand(SIE_CMD_CONFIGURE_DEVICE);
+ SIEWriteData(0);
+}
+
+static void SIEconnect(void) {
+ // Connect USB device
+ uint8_t status = SIEgetDeviceStatus();
+ SIEsetDeviceStatus(status | SIE_DS_CON);
+}
+
+
+static void SIEdisconnect(void) {
+ // Disconnect USB device
+ uint8_t status = SIEgetDeviceStatus();
+ SIEsetDeviceStatus(status & ~SIE_DS_CON);
+}
+
+
+static uint8_t selectEndpointClearInterrupt(uint8_t endpoint) {
+ // Implemented using using EP_INT_CLR.
+ LPC_USB->USBEpIntClr = EP(endpoint);
+ while (!(LPC_USB->USBDevIntSt & CDFULL));
+ return (uint8_t)LPC_USB->USBCmdData;
+}
+
+
+static void enableEndpointEvent(uint8_t endpoint) {
+ // Enable an endpoint interrupt
+ LPC_USB->USBEpIntEn |= EP(endpoint);
+}
+
+static void disableEndpointEvent(uint8_t endpoint) __attribute__ ((unused));
+static void disableEndpointEvent(uint8_t endpoint) {
+ // Disable an endpoint interrupt
+ LPC_USB->USBEpIntEn &= ~EP(endpoint);
+}
+
+static volatile uint32_t __attribute__((used)) dummyRead;
+uint32_t USBHAL::endpointReadcore(uint8_t endpoint, uint8_t *buffer) {
+ // Read from an OUT endpoint
+ uint32_t size;
+ uint32_t i;
+ uint32_t data = 0;
+ uint8_t offset;
+
+ LPC_USB->USBCtrl = LOG_ENDPOINT(endpoint) | RD_EN;
+ while (!(LPC_USB->USBRxPLen & PKT_RDY));
+
+ size = LPC_USB->USBRxPLen & PKT_LNGTH_MASK;
+
+ offset = 0;
+
+ if (size > 0) {
+ for (i=0; i<size; i++) {
+ if (offset==0) {
+ // Fetch up to four bytes of data as a word
+ data = LPC_USB->USBRxData;
+ }
+
+ // extract a byte
+ *buffer = (data>>offset) & 0xff;
+ buffer++;
+
+ // move on to the next byte
+ offset = (offset + 8) % 32;
+ }
+ } else {
+ dummyRead = LPC_USB->USBRxData;
+ }
+
+ LPC_USB->USBCtrl = 0;
+
+ if ((endpoint >> 1) % 3 || (endpoint >> 1) == 0) {
+ SIEselectEndpoint(endpoint);
+ SIEclearBuffer();
+ }
+
+ return size;
+}
+
+static void endpointWritecore(uint8_t endpoint, uint8_t *buffer, uint32_t size) {
+ // Write to an IN endpoint
+ uint32_t temp, data;
+ uint8_t offset;
+
+ LPC_USB->USBCtrl = LOG_ENDPOINT(endpoint) | WR_EN;
+
+ LPC_USB->USBTxPLen = size;
+ offset = 0;
+ data = 0;
+
+ if (size>0) {
+ do {
+ // Fetch next data byte into a word-sized temporary variable
+ temp = *buffer++;
+
+ // Add to current data word
+ temp = temp << offset;
+ data = data | temp;
+
+ // move on to the next byte
+ offset = (offset + 8) % 32;
+ size--;
+
+ if ((offset==0) || (size==0)) {
+ // Write the word to the endpoint
+ LPC_USB->USBTxData = data;
+ data = 0;
+ }
+ } while (size>0);
+ } else {
+ LPC_USB->USBTxData = 0;
+ }
+
+ // Clear WR_EN to cover zero length packet case
+ LPC_USB->USBCtrl=0;
+
+ SIEselectEndpoint(endpoint);
+ SIEvalidateBuffer();
+}
+
+USBHAL::USBHAL(void) {
+ // Disable IRQ
+ NVIC_DisableIRQ(USB_IRQn);
+
+ // fill in callback array
+ epCallback[0] = &USBHAL::EP1_OUT_callback;
+ epCallback[1] = &USBHAL::EP1_IN_callback;
+ epCallback[2] = &USBHAL::EP2_OUT_callback;
+ epCallback[3] = &USBHAL::EP2_IN_callback;
+ epCallback[4] = &USBHAL::EP3_OUT_callback;
+ epCallback[5] = &USBHAL::EP3_IN_callback;
+ epCallback[6] = &USBHAL::EP4_OUT_callback;
+ epCallback[7] = &USBHAL::EP4_IN_callback;
+ epCallback[8] = &USBHAL::EP5_OUT_callback;
+ epCallback[9] = &USBHAL::EP5_IN_callback;
+ epCallback[10] = &USBHAL::EP6_OUT_callback;
+ epCallback[11] = &USBHAL::EP6_IN_callback;
+ epCallback[12] = &USBHAL::EP7_OUT_callback;
+ epCallback[13] = &USBHAL::EP7_IN_callback;
+ epCallback[14] = &USBHAL::EP8_OUT_callback;
+ epCallback[15] = &USBHAL::EP8_IN_callback;
+ epCallback[16] = &USBHAL::EP9_OUT_callback;
+ epCallback[17] = &USBHAL::EP9_IN_callback;
+ epCallback[18] = &USBHAL::EP10_OUT_callback;
+ epCallback[19] = &USBHAL::EP10_IN_callback;
+ epCallback[20] = &USBHAL::EP11_OUT_callback;
+ epCallback[21] = &USBHAL::EP11_IN_callback;
+ epCallback[22] = &USBHAL::EP12_OUT_callback;
+ epCallback[23] = &USBHAL::EP12_IN_callback;
+ epCallback[24] = &USBHAL::EP13_OUT_callback;
+ epCallback[25] = &USBHAL::EP13_IN_callback;
+ epCallback[26] = &USBHAL::EP14_OUT_callback;
+ epCallback[27] = &USBHAL::EP14_IN_callback;
+ epCallback[28] = &USBHAL::EP15_OUT_callback;
+ epCallback[29] = &USBHAL::EP15_IN_callback;
+
+ // Enable power to USB device controller
+ LPC_SC->PCONP |= PCUSB;
+
+ // Enable USB clocks
+ LPC_USB->USBClkCtrl |= DEV_CLK_EN | AHB_CLK_EN;
+ while (LPC_USB->USBClkSt != (DEV_CLK_ON | AHB_CLK_ON));
+
+ // Configure pins P0.29 and P0.30 to be USB D+ and USB D-
+ LPC_PINCON->PINSEL1 &= 0xc3ffffff;
+ LPC_PINCON->PINSEL1 |= 0x14000000;
+
+ // Disconnect USB device
+ SIEdisconnect();
+
+ // Configure pin P2.9 to be Connect
+ LPC_PINCON->PINSEL4 &= 0xfffcffff;
+ LPC_PINCON->PINSEL4 |= 0x00040000;
+
+ // Connect must be low for at least 2.5uS
+ wait(0.3);
+
+ // Set the maximum packet size for the control endpoints
+ realiseEndpoint(EP0IN, MAX_PACKET_SIZE_EP0, 0);
+ realiseEndpoint(EP0OUT, MAX_PACKET_SIZE_EP0, 0);
+
+ // Attach IRQ
+ instance = this;
+ NVIC_SetVector(USB_IRQn, (uint32_t)&_usbisr);
+
+ // Enable interrupts for device events and EP0
+ LPC_USB->USBDevIntEn = EP_SLOW | DEV_STAT | FRAME;
+ enableEndpointEvent(EP0IN);
+ enableEndpointEvent(EP0OUT);
+}
+
+USBHAL::~USBHAL(void) {
+ // Ensure device disconnected
+ SIEdisconnect();
+ // Disable USB interrupts
+ NVIC_DisableIRQ(USB_IRQn);
+}
+
+void USBHAL::connect(void) {
+ NVIC_EnableIRQ(USB_IRQn);
+ // Connect USB device
+ SIEconnect();
+}
+
+void USBHAL::disconnect(void) {
+ NVIC_DisableIRQ(USB_IRQn);
+ // Disconnect USB device
+ SIEdisconnect();
+}
+
+void USBHAL::configureDevice(void) {
+ SIEconfigureDevice();
+}
+
+void USBHAL::unconfigureDevice(void) {
+ SIEunconfigureDevice();
+}
+
+void USBHAL::setAddress(uint8_t address) {
+ SIEsetAddress(address);
+}
+
+void USBHAL::EP0setup(uint8_t *buffer) {
+ endpointReadcore(EP0OUT, buffer);
+}
+
+void USBHAL::EP0read(void) {
+ // Not required
+}
+
+void USBHAL::EP0readStage(void) {
+ // Not required
+}
+
+uint32_t USBHAL::EP0getReadResult(uint8_t *buffer) {
+ return endpointReadcore(EP0OUT, buffer);
+}
+
+void USBHAL::EP0write(uint8_t *buffer, uint32_t size) {
+ endpointWritecore(EP0IN, buffer, size);
+}
+
+void USBHAL::EP0getWriteResult(void) {
+ // Not required
+}
+
+void USBHAL::EP0stall(void) {
+ // This will stall both control endpoints
+ stallEndpoint(EP0OUT);
+}
+
+EP_STATUS USBHAL::endpointRead(uint8_t endpoint, uint32_t maximumSize) {
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointReadResult(uint8_t endpoint, uint8_t * buffer, uint32_t *bytesRead) {
+
+ //for isochronous endpoint, we don't wait an interrupt
+ if ((endpoint >> 1) % 3 || (endpoint >> 1) == 0) {
+ if (!(epComplete & EP(endpoint)))
+ return EP_PENDING;
+ }
+
+ *bytesRead = endpointReadcore(endpoint, buffer);
+ epComplete &= ~EP(endpoint);
+ return EP_COMPLETED;
+}
+
+EP_STATUS USBHAL::endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size) {
+ if (getEndpointStallState(endpoint)) {
+ return EP_STALLED;
+ }
+
+ epComplete &= ~EP(endpoint);
+
+ endpointWritecore(endpoint, data, size);
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointWriteResult(uint8_t endpoint) {
+ if (epComplete & EP(endpoint)) {
+ epComplete &= ~EP(endpoint);
+ return EP_COMPLETED;
+ }
+
+ return EP_PENDING;
+}
+
+bool USBHAL::realiseEndpoint(uint8_t endpoint, uint32_t maxPacket, uint32_t flags) {
+ // Realise an endpoint
+ LPC_USB->USBDevIntClr = EP_RLZED;
+ LPC_USB->USBReEp |= EP(endpoint);
+ LPC_USB->USBEpInd = endpoint;
+ LPC_USB->USBMaxPSize = maxPacket;
+
+ while (!(LPC_USB->USBDevIntSt & EP_RLZED));
+ LPC_USB->USBDevIntClr = EP_RLZED;
+
+ // Clear stall state
+ endpointStallState &= ~EP(endpoint);
+
+ enableEndpointEvent(endpoint);
+ return true;
+}
+
+void USBHAL::stallEndpoint(uint8_t endpoint) {
+ // Stall an endpoint
+ if ( (endpoint==EP0IN) || (endpoint==EP0OUT) ) {
+ // Conditionally stall both control endpoints
+ SIEsetEndpointStatus(EP0OUT, SIE_SES_CND_ST);
+ } else {
+ SIEsetEndpointStatus(endpoint, SIE_SES_ST);
+
+ // Update stall state
+ endpointStallState |= EP(endpoint);
+ }
+}
+
+void USBHAL::unstallEndpoint(uint8_t endpoint) {
+ // Unstall an endpoint. The endpoint will also be reinitialised
+ SIEsetEndpointStatus(endpoint, 0);
+
+ // Update stall state
+ endpointStallState &= ~EP(endpoint);
+}
+
+bool USBHAL::getEndpointStallState(uint8_t endpoint) {
+ // Returns true if endpoint stalled
+ return endpointStallState & EP(endpoint);
+}
+
+void USBHAL::remoteWakeup(void) {
+ // Remote wakeup
+ uint8_t status;
+
+ // Enable USB clocks
+ LPC_USB->USBClkCtrl |= DEV_CLK_EN | AHB_CLK_EN;
+ while (LPC_USB->USBClkSt != (DEV_CLK_ON | AHB_CLK_ON));
+
+ status = SIEgetDeviceStatus();
+ SIEsetDeviceStatus(status & ~SIE_DS_SUS);
+}
+
+void USBHAL::_usbisr(void) {
+ instance->usbisr();
+}
+
+
+void USBHAL::usbisr(void) {
+ uint8_t devStat;
+
+ if (LPC_USB->USBDevIntSt & FRAME) {
+ // Start of frame event
+ SOF(SIEgetFrameNumber());
+ // Clear interrupt status flag
+ LPC_USB->USBDevIntClr = FRAME;
+ }
+
+ if (LPC_USB->USBDevIntSt & DEV_STAT) {
+ // Device Status interrupt
+ // Must clear the interrupt status flag before reading the device status from the SIE
+ LPC_USB->USBDevIntClr = DEV_STAT;
+
+ // Read device status from SIE
+ devStat = SIEgetDeviceStatus();
+ //printf("devStat: %d\r\n", devStat);
+
+ if (devStat & SIE_DS_SUS_CH) {
+ // Suspend status changed
+ if((devStat & SIE_DS_SUS) != 0) {
+ suspendStateChanged(0);
+ }
+ }
+
+ if (devStat & SIE_DS_RST) {
+ // Bus reset
+ if((devStat & SIE_DS_SUS) == 0) {
+ suspendStateChanged(1);
+ }
+ busReset();
+ }
+ }
+
+ if (LPC_USB->USBDevIntSt & EP_SLOW) {
+ // (Slow) Endpoint Interrupt
+
+ // Process each endpoint interrupt
+ if (LPC_USB->USBEpIntSt & EP(EP0OUT)) {
+ if (selectEndpointClearInterrupt(EP0OUT) & SIE_SE_STP) {
+ // this is a setup packet
+ EP0setupCallback();
+ } else {
+ EP0out();
+ }
+ LPC_USB->USBDevIntClr = EP_SLOW;
+ }
+
+ if (LPC_USB->USBEpIntSt & EP(EP0IN)) {
+ selectEndpointClearInterrupt(EP0IN);
+ LPC_USB->USBDevIntClr = EP_SLOW;
+ EP0in();
+ }
+
+ for (uint8_t num = 2; num < 16*2; num++) {
+ if (LPC_USB->USBEpIntSt & EP(num)) {
+ selectEndpointClearInterrupt(num);
+ epComplete |= EP(num);
+ LPC_USB->USBDevIntClr = EP_SLOW;
+ if ((instance->*(epCallback[num - 2]))()) {
+ epComplete &= ~EP(num);
+ }
+ }
+ }
+ }
+}
+
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBHID/USBHID.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHID/USBHID.cpp Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,273 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+#include "USBHAL.h"
+#include "USBHID.h"
+
+
+USBHID::USBHID(uint8_t output_report_length, uint8_t input_report_length, uint16_t vendor_id, uint16_t product_id, uint16_t product_release, bool connect): USBDevice(vendor_id, product_id, product_release)
+{
+ output_length = output_report_length;
+ input_length = input_report_length;
+ if(connect) {
+ USBDevice::connect();
+ }
+}
+
+
+bool USBHID::send(HID_REPORT *report)
+{
+ return write(EPINT_IN, report->data, report->length, MAX_HID_REPORT_SIZE);
+}
+
+bool USBHID::sendNB(HID_REPORT *report)
+{
+ return writeNB(EPINT_IN, report->data, report->length, MAX_HID_REPORT_SIZE);
+}
+
+
+bool USBHID::read(HID_REPORT *report)
+{
+ uint32_t bytesRead = 0;
+ bool result;
+ result = USBDevice::readEP(EPINT_OUT, report->data, &bytesRead, MAX_HID_REPORT_SIZE);
+ if(!readStart(EPINT_OUT, MAX_HID_REPORT_SIZE))
+ return false;
+ report->length = bytesRead;
+ return result;
+}
+
+
+bool USBHID::readNB(HID_REPORT *report)
+{
+ uint32_t bytesRead = 0;
+ bool result;
+ result = USBDevice::readEP_NB(EPINT_OUT, report->data, &bytesRead, MAX_HID_REPORT_SIZE);
+ report->length = bytesRead;
+ if(!readStart(EPINT_OUT, MAX_HID_REPORT_SIZE))
+ return false;
+ return result;
+}
+
+
+uint16_t USBHID::reportDescLength() {
+ reportDesc();
+ return reportLength;
+}
+
+
+
+//
+// Route callbacks from lower layers to class(es)
+//
+
+
+// Called in ISR context
+// Called by USBDevice on Endpoint0 request
+// This is used to handle extensions to standard requests
+// and class specific requests
+// Return true if class handles this request
+bool USBHID::USBCallback_request() {
+ bool success = false;
+ CONTROL_TRANSFER * transfer = getTransferPtr();
+ uint8_t *hidDescriptor;
+
+ // Process additional standard requests
+
+ if ((transfer->setup.bmRequestType.Type == STANDARD_TYPE))
+ {
+ switch (transfer->setup.bRequest)
+ {
+ case GET_DESCRIPTOR:
+ switch (DESCRIPTOR_TYPE(transfer->setup.wValue))
+ {
+ case REPORT_DESCRIPTOR:
+ if ((reportDesc() != NULL) \
+ && (reportDescLength() != 0))
+ {
+ transfer->remaining = reportDescLength();
+ transfer->ptr = reportDesc();
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ }
+ break;
+ case HID_DESCRIPTOR:
+ // Find the HID descriptor, after the configuration descriptor
+ hidDescriptor = findDescriptor(HID_DESCRIPTOR);
+ if (hidDescriptor != NULL)
+ {
+ transfer->remaining = HID_DESCRIPTOR_LENGTH;
+ transfer->ptr = hidDescriptor;
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ }
+ break;
+
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ // Process class-specific requests
+
+ if (transfer->setup.bmRequestType.Type == CLASS_TYPE)
+ {
+ switch (transfer->setup.bRequest)
+ {
+ case SET_REPORT:
+ // First byte will be used for report ID
+ outputReport.data[0] = transfer->setup.wValue & 0xff;
+ outputReport.length = transfer->setup.wLength + 1;
+
+ transfer->remaining = sizeof(outputReport.data) - 1;
+ transfer->ptr = &outputReport.data[1];
+ transfer->direction = HOST_TO_DEVICE;
+ transfer->notify = true;
+ success = true;
+ default:
+ break;
+ }
+ }
+
+ return success;
+}
+
+
+#define DEFAULT_CONFIGURATION (1)
+
+
+// Called in ISR context
+// Set configuration. Return false if the
+// configuration is not supported
+bool USBHID::USBCallback_setConfiguration(uint8_t configuration) {
+ if (configuration != DEFAULT_CONFIGURATION) {
+ return false;
+ }
+
+ // Configure endpoints > 0
+ addEndpoint(EPINT_IN, MAX_PACKET_SIZE_EPINT);
+ addEndpoint(EPINT_OUT, MAX_PACKET_SIZE_EPINT);
+
+ // We activate the endpoint to be able to recceive data
+ readStart(EPINT_OUT, MAX_PACKET_SIZE_EPINT);
+ return true;
+}
+
+
+uint8_t * USBHID::stringIinterfaceDesc() {
+ static uint8_t stringIinterfaceDescriptor[] = {
+ 0x08, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'H',0,'I',0,'D',0, //bString iInterface - HID
+ };
+ return stringIinterfaceDescriptor;
+}
+
+uint8_t * USBHID::stringIproductDesc() {
+ static uint8_t stringIproductDescriptor[] = {
+ 0x16, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'H',0,'I',0,'D',0,' ',0,'D',0,'E',0,'V',0,'I',0,'C',0,'E',0 //bString iProduct - HID device
+ };
+ return stringIproductDescriptor;
+}
+
+
+
+uint8_t * USBHID::reportDesc() {
+ static uint8_t reportDescriptor[] = {
+ 0x06, LSB(0xFFAB), MSB(0xFFAB),
+ 0x0A, LSB(0x0200), MSB(0x0200),
+ 0xA1, 0x01, // Collection 0x01
+ 0x75, 0x08, // report size = 8 bits
+ 0x15, 0x00, // logical minimum = 0
+ 0x26, 0xFF, 0x00, // logical maximum = 255
+ 0x95, input_length, // report count
+ 0x09, 0x01, // usage
+ 0x81, 0x02, // Input (array)
+ 0x95, output_length, // report count
+ 0x09, 0x02, // usage
+ 0x91, 0x02, // Output (array)
+ 0xC0 // end collection
+
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+}
+
+#define DEFAULT_CONFIGURATION (1)
+#define TOTAL_DESCRIPTOR_LENGTH ((1 * CONFIGURATION_DESCRIPTOR_LENGTH) \
+ + (1 * INTERFACE_DESCRIPTOR_LENGTH) \
+ + (1 * HID_DESCRIPTOR_LENGTH) \
+ + (2 * ENDPOINT_DESCRIPTOR_LENGTH))
+
+uint8_t * USBHID::configurationDesc() {
+ static uint8_t configurationDescriptor[] = {
+ CONFIGURATION_DESCRIPTOR_LENGTH,// bLength
+ CONFIGURATION_DESCRIPTOR, // bDescriptorType
+ LSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (LSB)
+ MSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (MSB)
+ 0x01, // bNumInterfaces
+ DEFAULT_CONFIGURATION, // bConfigurationValue
+ 0x00, // iConfiguration
+ C_RESERVED | C_SELF_POWERED, // bmAttributes
+ C_POWER(0), // bMaxPower
+
+ INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR, // bDescriptorType
+ 0x00, // bInterfaceNumber
+ 0x00, // bAlternateSetting
+ 0x02, // bNumEndpoints
+ HID_CLASS, // bInterfaceClass
+ HID_SUBCLASS_NONE, // bInterfaceSubClass
+ HID_PROTOCOL_NONE, // bInterfaceProtocol
+ 0x00, // iInterface
+
+ HID_DESCRIPTOR_LENGTH, // bLength
+ HID_DESCRIPTOR, // bDescriptorType
+ LSB(HID_VERSION_1_11), // bcdHID (LSB)
+ MSB(HID_VERSION_1_11), // bcdHID (MSB)
+ 0x00, // bCountryCode
+ 0x01, // bNumDescriptors
+ REPORT_DESCRIPTOR, // bDescriptorType
+ LSB(this->reportDescLength()), // wDescriptorLength (LSB)
+ MSB(this->reportDescLength()), // wDescriptorLength (MSB)
+
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPINT_IN), // bEndpointAddress
+ E_INTERRUPT, // bmAttributes
+ LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB)
+ 1, // bInterval (milliseconds)
+
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPINT_OUT), // bEndpointAddress
+ E_INTERRUPT, // bmAttributes
+ LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB)
+ 1, // bInterval (milliseconds)
+ };
+ return configurationDescriptor;
+}
diff -r 000000000000 -r ecc3925d3f8c USBHID/USBHID.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHID/USBHID.h Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,172 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USB_HID_H
+#define USB_HID_H
+
+/* These headers are included for child class. */
+#include "USBEndpoints.h"
+#include "USBDescriptor.h"
+#include "USBDevice_Types.h"
+
+#include "USBHID_Types.h"
+#include "USBDevice.h"
+
+
+/**
+ * USBHID example
+ * @code
+ * #include "mbed.h"
+ * #include "USBHID.h"
+ *
+ * USBHID hid;
+ * HID_REPORT recv;
+ * BusOut leds(LED1,LED2,LED3,LED4);
+ *
+ * int main(void) {
+ * while (1) {
+ * hid.read(&recv);
+ * leds = recv.data[0];
+ * }
+ * }
+ * @endcode
+ */
+
+class USBHID: public USBDevice {
+public:
+
+ /**
+ * Constructor
+ *
+ * @param output_report_length Maximum length of a sent report (up to 64 bytes) (default: 64 bytes)
+ * @param input_report_length Maximum length of a received report (up to 64 bytes) (default: 64 bytes)
+ * @param vendor_id Your vendor_id
+ * @param product_id Your product_id
+ * @param product_release Your preoduct_release
+ * @param connect Connect the device
+ */
+ USBHID(uint8_t output_report_length = 64, uint8_t input_report_length = 64, uint16_t vendor_id = 0x1234, uint16_t product_id = 0x0006, uint16_t product_release = 0x0001, bool connect = true);
+
+
+ /**
+ * Send a Report. warning: blocking
+ *
+ * @param report Report which will be sent (a report is defined by all data and the length)
+ * @returns true if successful
+ */
+ bool send(HID_REPORT *report);
+
+
+ /**
+ * Send a Report. warning: non blocking
+ *
+ * @param report Report which will be sent (a report is defined by all data and the length)
+ * @returns true if successful
+ */
+ bool sendNB(HID_REPORT *report);
+
+ /**
+ * Read a report: blocking
+ *
+ * @param report pointer to the report to fill
+ * @returns true if successful
+ */
+ bool read(HID_REPORT * report);
+
+ /**
+ * Read a report: non blocking
+ *
+ * @param report pointer to the report to fill
+ * @returns true if successful
+ */
+ bool readNB(HID_REPORT * report);
+
+protected:
+ uint16_t reportLength;
+
+ /*
+ * Get the Report descriptor
+ *
+ * @returns pointer to the report descriptor
+ */
+ virtual uint8_t * reportDesc();
+
+ /*
+ * Get the length of the report descriptor
+ *
+ * @returns the length of the report descriptor
+ */
+ virtual uint16_t reportDescLength();
+
+ /*
+ * Get string product descriptor
+ *
+ * @returns pointer to the string product descriptor
+ */
+ virtual uint8_t * stringIproductDesc();
+
+ /*
+ * Get string interface descriptor
+ *
+ * @returns pointer to the string interface descriptor
+ */
+ virtual uint8_t * stringIinterfaceDesc();
+
+ /*
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc();
+
+
+ /*
+ * HID Report received by SET_REPORT request. Warning: Called in ISR context
+ * First byte of data will be the report ID
+ *
+ * @param report Data and length received
+ */
+ virtual void HID_callbackSetReport(HID_REPORT *report){};
+
+
+ /*
+ * Called by USBDevice on Endpoint0 request. Warning: Called in ISR context
+ * This is used to handle extensions to standard requests
+ * and class specific requests
+ *
+ * @returns true if class handles this request
+ */
+ virtual bool USBCallback_request();
+
+
+ /*
+ * Called by USBDevice layer. Set configuration of the device.
+ * For instance, you can add all endpoints that you need on this function.
+ *
+ * @param configuration Number of the configuration
+ * @returns true if class handles this request
+ */
+ virtual bool USBCallback_setConfiguration(uint8_t configuration);
+
+private:
+ HID_REPORT outputReport;
+ uint8_t output_length;
+ uint8_t input_length;
+};
+
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBHID/USBHID_Types.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHID/USBHID_Types.h Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,91 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBCLASS_HID_TYPES
+#define USBCLASS_HID_TYPES
+
+#include <stdint.h>
+
+/* */
+#define HID_VERSION_1_11 (0x0111)
+
+/* HID Class */
+#define HID_CLASS (3)
+#define HID_SUBCLASS_NONE (0)
+#define HID_PROTOCOL_NONE (0)
+
+/* Descriptors */
+#define HID_DESCRIPTOR (33)
+#define HID_DESCRIPTOR_LENGTH (0x09)
+#define REPORT_DESCRIPTOR (34)
+
+/* Class requests */
+#define GET_REPORT (0x1)
+#define GET_IDLE (0x2)
+#define SET_REPORT (0x9)
+#define SET_IDLE (0xa)
+
+/* HID Class Report Descriptor */
+/* Short items: size is 0, 1, 2 or 3 specifying 0, 1, 2 or 4 (four) bytes */
+/* of data as per HID Class standard */
+
+/* Main items */
+#define INPUT(size) (0x80 | size)
+#define OUTPUT(size) (0x90 | size)
+#define FEATURE(size) (0xb0 | size)
+#define COLLECTION(size) (0xa0 | size)
+#define END_COLLECTION(size) (0xc0 | size)
+
+/* Global items */
+#define USAGE_PAGE(size) (0x04 | size)
+#define LOGICAL_MINIMUM(size) (0x14 | size)
+#define LOGICAL_MAXIMUM(size) (0x24 | size)
+#define PHYSICAL_MINIMUM(size) (0x34 | size)
+#define PHYSICAL_MAXIMUM(size) (0x44 | size)
+#define UNIT_EXPONENT(size) (0x54 | size)
+#define UNIT(size) (0x64 | size)
+#define REPORT_SIZE(size) (0x74 | size)
+#define REPORT_ID(size) (0x84 | size)
+#define REPORT_COUNT(size) (0x94 | size)
+#define PUSH(size) (0xa4 | size)
+#define POP(size) (0xb4 | size)
+
+/* Local items */
+#define USAGE(size) (0x08 | size)
+#define USAGE_MINIMUM(size) (0x18 | size)
+#define USAGE_MAXIMUM(size) (0x28 | size)
+#define DESIGNATOR_INDEX(size) (0x38 | size)
+#define DESIGNATOR_MINIMUM(size) (0x48 | size)
+#define DESIGNATOR_MAXIMUM(size) (0x58 | size)
+#define STRING_INDEX(size) (0x78 | size)
+#define STRING_MINIMUM(size) (0x88 | size)
+#define STRING_MAXIMUM(size) (0x98 | size)
+#define DELIMITER(size) (0xa8 | size)
+
+/* HID Report */
+/* Where report IDs are used the first byte of 'data' will be the */
+/* report ID and 'length' will include this report ID byte. */
+
+#define MAX_HID_REPORT_SIZE (64)
+
+typedef struct {
+ uint32_t length;
+ uint8_t data[MAX_HID_REPORT_SIZE];
+} HID_REPORT;
+
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBHID/USBKeyboard.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHID/USBKeyboard.cpp Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,558 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+
+#include "USBKeyboard.h"
+
+#define REPORT_ID_KEYBOARD 1
+#define REPORT_ID_VOLUME 3
+
+
+typedef struct {
+ unsigned char usage;
+ unsigned char modifier;
+} KEYMAP;
+
+#ifdef US_KEYBOARD
+/* US keyboard (as HID standard) */
+#define KEYMAP_SIZE (152)
+const KEYMAP keymap[KEYMAP_SIZE] = {
+ {0, 0}, /* NUL */
+ {0, 0}, /* SOH */
+ {0, 0}, /* STX */
+ {0, 0}, /* ETX */
+ {0, 0}, /* EOT */
+ {0, 0}, /* ENQ */
+ {0, 0}, /* ACK */
+ {0, 0}, /* BEL */
+ {0x2a, 0}, /* BS */ /* Keyboard Delete (Backspace) */
+ {0x2b, 0}, /* TAB */ /* Keyboard Tab */
+ {0x28, 0}, /* LF */ /* Keyboard Return (Enter) */
+ {0, 0}, /* VT */
+ {0, 0}, /* FF */
+ {0, 0}, /* CR */
+ {0, 0}, /* SO */
+ {0, 0}, /* SI */
+ {0, 0}, /* DEL */
+ {0, 0}, /* DC1 */
+ {0, 0}, /* DC2 */
+ {0, 0}, /* DC3 */
+ {0, 0}, /* DC4 */
+ {0, 0}, /* NAK */
+ {0, 0}, /* SYN */
+ {0, 0}, /* ETB */
+ {0, 0}, /* CAN */
+ {0, 0}, /* EM */
+ {0, 0}, /* SUB */
+ {0, 0}, /* ESC */
+ {0, 0}, /* FS */
+ {0, 0}, /* GS */
+ {0, 0}, /* RS */
+ {0, 0}, /* US */
+ {0x2c, 0}, /* */
+ {0x1e, KEY_SHIFT}, /* ! */
+ {0x34, KEY_SHIFT}, /* " */
+ {0x20, KEY_SHIFT}, /* # */
+ {0x21, KEY_SHIFT}, /* $ */
+ {0x22, KEY_SHIFT}, /* % */
+ {0x24, KEY_SHIFT}, /* & */
+ {0x34, 0}, /* ' */
+ {0x26, KEY_SHIFT}, /* ( */
+ {0x27, KEY_SHIFT}, /* ) */
+ {0x25, KEY_SHIFT}, /* * */
+ {0x2e, KEY_SHIFT}, /* + */
+ {0x36, 0}, /* , */
+ {0x2d, 0}, /* - */
+ {0x37, 0}, /* . */
+ {0x38, 0}, /* / */
+ {0x27, 0}, /* 0 */
+ {0x1e, 0}, /* 1 */
+ {0x1f, 0}, /* 2 */
+ {0x20, 0}, /* 3 */
+ {0x21, 0}, /* 4 */
+ {0x22, 0}, /* 5 */
+ {0x23, 0}, /* 6 */
+ {0x24, 0}, /* 7 */
+ {0x25, 0}, /* 8 */
+ {0x26, 0}, /* 9 */
+ {0x33, KEY_SHIFT}, /* : */
+ {0x33, 0}, /* ; */
+ {0x36, KEY_SHIFT}, /* < */
+ {0x2e, 0}, /* = */
+ {0x37, KEY_SHIFT}, /* > */
+ {0x38, KEY_SHIFT}, /* ? */
+ {0x1f, KEY_SHIFT}, /* @ */
+ {0x04, KEY_SHIFT}, /* A */
+ {0x05, KEY_SHIFT}, /* B */
+ {0x06, KEY_SHIFT}, /* C */
+ {0x07, KEY_SHIFT}, /* D */
+ {0x08, KEY_SHIFT}, /* E */
+ {0x09, KEY_SHIFT}, /* F */
+ {0x0a, KEY_SHIFT}, /* G */
+ {0x0b, KEY_SHIFT}, /* H */
+ {0x0c, KEY_SHIFT}, /* I */
+ {0x0d, KEY_SHIFT}, /* J */
+ {0x0e, KEY_SHIFT}, /* K */
+ {0x0f, KEY_SHIFT}, /* L */
+ {0x10, KEY_SHIFT}, /* M */
+ {0x11, KEY_SHIFT}, /* N */
+ {0x12, KEY_SHIFT}, /* O */
+ {0x13, KEY_SHIFT}, /* P */
+ {0x14, KEY_SHIFT}, /* Q */
+ {0x15, KEY_SHIFT}, /* R */
+ {0x16, KEY_SHIFT}, /* S */
+ {0x17, KEY_SHIFT}, /* T */
+ {0x18, KEY_SHIFT}, /* U */
+ {0x19, KEY_SHIFT}, /* V */
+ {0x1a, KEY_SHIFT}, /* W */
+ {0x1b, KEY_SHIFT}, /* X */
+ {0x1c, KEY_SHIFT}, /* Y */
+ {0x1d, KEY_SHIFT}, /* Z */
+ {0x2f, 0}, /* [ */
+ {0x31, 0}, /* \ */
+ {0x30, 0}, /* ] */
+ {0x23, KEY_SHIFT}, /* ^ */
+ {0x2d, KEY_SHIFT}, /* _ */
+ {0x35, 0}, /* ` */
+ {0x04, 0}, /* a */
+ {0x05, 0}, /* b */
+ {0x06, 0}, /* c */
+ {0x07, 0}, /* d */
+ {0x08, 0}, /* e */
+ {0x09, 0}, /* f */
+ {0x0a, 0}, /* g */
+ {0x0b, 0}, /* h */
+ {0x0c, 0}, /* i */
+ {0x0d, 0}, /* j */
+ {0x0e, 0}, /* k */
+ {0x0f, 0}, /* l */
+ {0x10, 0}, /* m */
+ {0x11, 0}, /* n */
+ {0x12, 0}, /* o */
+ {0x13, 0}, /* p */
+ {0x14, 0}, /* q */
+ {0x15, 0}, /* r */
+ {0x16, 0}, /* s */
+ {0x17, 0}, /* t */
+ {0x18, 0}, /* u */
+ {0x19, 0}, /* v */
+ {0x1a, 0}, /* w */
+ {0x1b, 0}, /* x */
+ {0x1c, 0}, /* y */
+ {0x1d, 0}, /* z */
+ {0x2f, KEY_SHIFT}, /* { */
+ {0x31, KEY_SHIFT}, /* | */
+ {0x30, KEY_SHIFT}, /* } */
+ {0x35, KEY_SHIFT}, /* ~ */
+ {0,0}, /* DEL */
+
+ {0x3a, 0}, /* F1 */
+ {0x3b, 0}, /* F2 */
+ {0x3c, 0}, /* F3 */
+ {0x3d, 0}, /* F4 */
+ {0x3e, 0}, /* F5 */
+ {0x3f, 0}, /* F6 */
+ {0x40, 0}, /* F7 */
+ {0x41, 0}, /* F8 */
+ {0x42, 0}, /* F9 */
+ {0x43, 0}, /* F10 */
+ {0x44, 0}, /* F11 */
+ {0x45, 0}, /* F12 */
+
+ {0x46, 0}, /* PRINT_SCREEN */
+ {0x47, 0}, /* SCROLL_LOCK */
+ {0x39, 0}, /* CAPS_LOCK */
+ {0x53, 0}, /* NUM_LOCK */
+ {0x49, 0}, /* INSERT */
+ {0x4a, 0}, /* HOME */
+ {0x4b, 0}, /* PAGE_UP */
+ {0x4e, 0}, /* PAGE_DOWN */
+
+ {0x4f, 0}, /* RIGHT_ARROW */
+ {0x50, 0}, /* LEFT_ARROW */
+ {0x51, 0}, /* DOWN_ARROW */
+ {0x52, 0}, /* UP_ARROW */
+};
+
+#else
+/* UK keyboard */
+#define KEYMAP_SIZE (152)
+const KEYMAP keymap[KEYMAP_SIZE] = {
+ {0, 0}, /* NUL */
+ {0, 0}, /* SOH */
+ {0, 0}, /* STX */
+ {0, 0}, /* ETX */
+ {0, 0}, /* EOT */
+ {0, 0}, /* ENQ */
+ {0, 0}, /* ACK */
+ {0, 0}, /* BEL */
+ {0x2a, 0}, /* BS */ /* Keyboard Delete (Backspace) */
+ {0x2b, 0}, /* TAB */ /* Keyboard Tab */
+ {0x28, 0}, /* LF */ /* Keyboard Return (Enter) */
+ {0, 0}, /* VT */
+ {0, 0}, /* FF */
+ {0, 0}, /* CR */
+ {0, 0}, /* SO */
+ {0, 0}, /* SI */
+ {0, 0}, /* DEL */
+ {0, 0}, /* DC1 */
+ {0, 0}, /* DC2 */
+ {0, 0}, /* DC3 */
+ {0, 0}, /* DC4 */
+ {0, 0}, /* NAK */
+ {0, 0}, /* SYN */
+ {0, 0}, /* ETB */
+ {0, 0}, /* CAN */
+ {0, 0}, /* EM */
+ {0, 0}, /* SUB */
+ {0, 0}, /* ESC */
+ {0, 0}, /* FS */
+ {0, 0}, /* GS */
+ {0, 0}, /* RS */
+ {0, 0}, /* US */
+ {0x2c, 0}, /* */
+ {0x1e, KEY_SHIFT}, /* ! */
+ {0x1f, KEY_SHIFT}, /* " */
+ {0x32, 0}, /* # */
+ {0x21, KEY_SHIFT}, /* $ */
+ {0x22, KEY_SHIFT}, /* % */
+ {0x24, KEY_SHIFT}, /* & */
+ {0x34, 0}, /* ' */
+ {0x26, KEY_SHIFT}, /* ( */
+ {0x27, KEY_SHIFT}, /* ) */
+ {0x25, KEY_SHIFT}, /* * */
+ {0x2e, KEY_SHIFT}, /* + */
+ {0x36, 0}, /* , */
+ {0x2d, 0}, /* - */
+ {0x37, 0}, /* . */
+ {0x38, 0}, /* / */
+ {0x27, 0}, /* 0 */
+ {0x1e, 0}, /* 1 */
+ {0x1f, 0}, /* 2 */
+ {0x20, 0}, /* 3 */
+ {0x21, 0}, /* 4 */
+ {0x22, 0}, /* 5 */
+ {0x23, 0}, /* 6 */
+ {0x24, 0}, /* 7 */
+ {0x25, 0}, /* 8 */
+ {0x26, 0}, /* 9 */
+ {0x33, KEY_SHIFT}, /* : */
+ {0x33, 0}, /* ; */
+ {0x36, KEY_SHIFT}, /* < */
+ {0x2e, 0}, /* = */
+ {0x37, KEY_SHIFT}, /* > */
+ {0x38, KEY_SHIFT}, /* ? */
+ {0x34, KEY_SHIFT}, /* @ */
+ {0x04, KEY_SHIFT}, /* A */
+ {0x05, KEY_SHIFT}, /* B */
+ {0x06, KEY_SHIFT}, /* C */
+ {0x07, KEY_SHIFT}, /* D */
+ {0x08, KEY_SHIFT}, /* E */
+ {0x09, KEY_SHIFT}, /* F */
+ {0x0a, KEY_SHIFT}, /* G */
+ {0x0b, KEY_SHIFT}, /* H */
+ {0x0c, KEY_SHIFT}, /* I */
+ {0x0d, KEY_SHIFT}, /* J */
+ {0x0e, KEY_SHIFT}, /* K */
+ {0x0f, KEY_SHIFT}, /* L */
+ {0x10, KEY_SHIFT}, /* M */
+ {0x11, KEY_SHIFT}, /* N */
+ {0x12, KEY_SHIFT}, /* O */
+ {0x13, KEY_SHIFT}, /* P */
+ {0x14, KEY_SHIFT}, /* Q */
+ {0x15, KEY_SHIFT}, /* R */
+ {0x16, KEY_SHIFT}, /* S */
+ {0x17, KEY_SHIFT}, /* T */
+ {0x18, KEY_SHIFT}, /* U */
+ {0x19, KEY_SHIFT}, /* V */
+ {0x1a, KEY_SHIFT}, /* W */
+ {0x1b, KEY_SHIFT}, /* X */
+ {0x1c, KEY_SHIFT}, /* Y */
+ {0x1d, KEY_SHIFT}, /* Z */
+ {0x2f, 0}, /* [ */
+ {0x64, 0}, /* \ */
+ {0x30, 0}, /* ] */
+ {0x23, KEY_SHIFT}, /* ^ */
+ {0x2d, KEY_SHIFT}, /* _ */
+ {0x35, 0}, /* ` */
+ {0x04, 0}, /* a */
+ {0x05, 0}, /* b */
+ {0x06, 0}, /* c */
+ {0x07, 0}, /* d */
+ {0x08, 0}, /* e */
+ {0x09, 0}, /* f */
+ {0x0a, 0}, /* g */
+ {0x0b, 0}, /* h */
+ {0x0c, 0}, /* i */
+ {0x0d, 0}, /* j */
+ {0x0e, 0}, /* k */
+ {0x0f, 0}, /* l */
+ {0x10, 0}, /* m */
+ {0x11, 0}, /* n */
+ {0x12, 0}, /* o */
+ {0x13, 0}, /* p */
+ {0x14, 0}, /* q */
+ {0x15, 0}, /* r */
+ {0x16, 0}, /* s */
+ {0x17, 0}, /* t */
+ {0x18, 0}, /* u */
+ {0x19, 0}, /* v */
+ {0x1a, 0}, /* w */
+ {0x1b, 0}, /* x */
+ {0x1c, 0}, /* y */
+ {0x1d, 0}, /* z */
+ {0x2f, KEY_SHIFT}, /* { */
+ {0x64, KEY_SHIFT}, /* | */
+ {0x30, KEY_SHIFT}, /* } */
+ {0x32, KEY_SHIFT}, /* ~ */
+ {0,0}, /* DEL */
+
+ {0x3a, 0}, /* F1 */
+ {0x3b, 0}, /* F2 */
+ {0x3c, 0}, /* F3 */
+ {0x3d, 0}, /* F4 */
+ {0x3e, 0}, /* F5 */
+ {0x3f, 0}, /* F6 */
+ {0x40, 0}, /* F7 */
+ {0x41, 0}, /* F8 */
+ {0x42, 0}, /* F9 */
+ {0x43, 0}, /* F10 */
+ {0x44, 0}, /* F11 */
+ {0x45, 0}, /* F12 */
+
+ {0x46, 0}, /* PRINT_SCREEN */
+ {0x47, 0}, /* SCROLL_LOCK */
+ {0x39, 0}, /* CAPS_LOCK */
+ {0x53, 0}, /* NUM_LOCK */
+ {0x49, 0}, /* INSERT */
+ {0x4a, 0}, /* HOME */
+ {0x4b, 0}, /* PAGE_UP */
+ {0x4e, 0}, /* PAGE_DOWN */
+
+ {0x4f, 0}, /* RIGHT_ARROW */
+ {0x50, 0}, /* LEFT_ARROW */
+ {0x51, 0}, /* DOWN_ARROW */
+ {0x52, 0}, /* UP_ARROW */
+};
+#endif
+
+uint8_t * USBKeyboard::reportDesc() {
+ static uint8_t reportDescriptor[] = {
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x06, // Keyboard
+ COLLECTION(1), 0x01, // Application
+ REPORT_ID(1), REPORT_ID_KEYBOARD,
+
+ USAGE_PAGE(1), 0x07, // Key Codes
+ USAGE_MINIMUM(1), 0xE0,
+ USAGE_MAXIMUM(1), 0xE7,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x08,
+ INPUT(1), 0x02, // Data, Variable, Absolute
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x08,
+ INPUT(1), 0x01, // Constant
+
+
+ REPORT_COUNT(1), 0x05,
+ REPORT_SIZE(1), 0x01,
+ USAGE_PAGE(1), 0x08, // LEDs
+ USAGE_MINIMUM(1), 0x01,
+ USAGE_MAXIMUM(1), 0x05,
+ OUTPUT(1), 0x02, // Data, Variable, Absolute
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x03,
+ OUTPUT(1), 0x01, // Constant
+
+
+ REPORT_COUNT(1), 0x06,
+ REPORT_SIZE(1), 0x08,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x65,
+ USAGE_PAGE(1), 0x07, // Key Codes
+ USAGE_MINIMUM(1), 0x00,
+ USAGE_MAXIMUM(1), 0x65,
+ INPUT(1), 0x00, // Data, Array
+ END_COLLECTION(0),
+
+ // Media Control
+ USAGE_PAGE(1), 0x0C,
+ USAGE(1), 0x01,
+ COLLECTION(1), 0x01,
+ REPORT_ID(1), REPORT_ID_VOLUME,
+ USAGE_PAGE(1), 0x0C,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x07,
+ USAGE(1), 0xB5, // Next Track
+ USAGE(1), 0xB6, // Previous Track
+ USAGE(1), 0xB7, // Stop
+ USAGE(1), 0xCD, // Play / Pause
+ USAGE(1), 0xE2, // Mute
+ USAGE(1), 0xE9, // Volume Up
+ USAGE(1), 0xEA, // Volume Down
+ INPUT(1), 0x02, // Input (Data, Variable, Absolute)
+ REPORT_COUNT(1), 0x01,
+ INPUT(1), 0x01,
+ END_COLLECTION(0),
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+}
+
+
+bool USBKeyboard::EP1_OUT_callback() {
+ uint32_t bytesRead = 0;
+ uint8_t led[65];
+ USBDevice::readEP(EPINT_OUT, led, &bytesRead, MAX_HID_REPORT_SIZE);
+
+ // we take led[1] because led[0] is the report ID
+ lock_status = led[1] & 0x07;
+
+ // We activate the endpoint to be able to recceive data
+ if (!readStart(EPINT_OUT, MAX_HID_REPORT_SIZE))
+ return false;
+ return true;
+}
+
+uint8_t USBKeyboard::lockStatus() {
+ return lock_status;
+}
+
+int USBKeyboard::_putc(int c) {
+ return keyCode(c, keymap[c].modifier);
+}
+
+bool USBKeyboard::keyCode(uint8_t key,uint8_t key1 ,uint8_t key2 ,uint8_t key3 ,uint8_t key4 ,uint8_t key5 , uint8_t modifier) {
+ // Send a simulated keyboard keypress. Returns true if successful.
+ HID_REPORT report;
+
+ report.data[0] = REPORT_ID_KEYBOARD;
+ report.data[1] = modifier;
+ report.data[2] = 0;
+ report.data[3] = keymap[key].usage;
+ report.data[4] = keymap[key1].usage;
+ report.data[5] = keymap[key2].usage;
+ report.data[6] = keymap[key3].usage;
+ report.data[7] = keymap[key4].usage;
+ report.data[8] = keymap[key5].usage;
+
+ report.length = 9;
+
+ if (!send(&report)) {
+ return false;
+ }
+
+ /* report.data[1] = 0;
+ report.data[3] = 0;
+ report.data[4] = 0;
+ report.data[5] = 0;
+ report.data[6] = 0;
+ report.data[7] = 0;
+ report.data[8] = 0;
+
+ if (!send(&report)) {
+ return false;
+ }*/
+
+ return true;
+
+}
+
+
+bool USBKeyboard::mediaControl(MEDIA_KEY key) {
+ HID_REPORT report;
+
+ report.data[0] = REPORT_ID_VOLUME;
+ report.data[1] = (1 << key) & 0x7f;
+
+ report.length = 2;
+
+ if (!send(&report)) {
+ return false;
+ }
+
+ report.data[0] = REPORT_ID_VOLUME;
+ report.data[1] = 0;
+
+ report.length = 2;
+
+ return send(&report);
+}
+
+
+#define DEFAULT_CONFIGURATION (1)
+#define TOTAL_DESCRIPTOR_LENGTH ((1 * CONFIGURATION_DESCRIPTOR_LENGTH) \
+ + (1 * INTERFACE_DESCRIPTOR_LENGTH) \
+ + (1 * HID_DESCRIPTOR_LENGTH) \
+ + (2 * ENDPOINT_DESCRIPTOR_LENGTH))
+
+uint8_t * USBKeyboard::configurationDesc() {
+ static uint8_t configurationDescriptor[] = {
+ CONFIGURATION_DESCRIPTOR_LENGTH,// bLength
+ CONFIGURATION_DESCRIPTOR, // bDescriptorType
+ LSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (LSB)
+ MSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (MSB)
+ 0x01, // bNumInterfaces
+ DEFAULT_CONFIGURATION, // bConfigurationValue
+ 0x00, // iConfiguration
+ C_RESERVED | C_SELF_POWERED, // bmAttributes
+ C_POWER(0), // bMaxPowerHello World from Mbed
+
+ INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR, // bDescriptorType
+ 0x00, // bInterfaceNumber
+ 0x00, // bAlternateSetting
+ 0x02, // bNumEndpoints
+ HID_CLASS, // bInterfaceClass
+ 1, // bInterfaceSubClass
+ 1, // bInterfaceProtocol (keyboard)
+ 0x00, // iInterface
+
+ HID_DESCRIPTOR_LENGTH, // bLength
+ HID_DESCRIPTOR, // bDescriptorType
+ LSB(HID_VERSION_1_11), // bcdHID (LSB)
+ MSB(HID_VERSION_1_11), // bcdHID (MSB)
+ 0x00, // bCountryCode
+ 0x01, // bNumDescriptors
+ REPORT_DESCRIPTOR, // bDescriptorType
+ LSB(reportDescLength()), // wDescriptorLength (LSB)
+ MSB(reportDescLength()), // wDescriptorLength (MSB)
+
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPINT_IN), // bEndpointAddress
+ E_INTERRUPT, // bmAttributes
+ LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB)
+ 1, // bInterval (milliseconds)
+
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPINT_OUT), // bEndpointAddress
+ E_INTERRUPT, // bmAttributes
+ LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB)
+ 1, // bInterval (milliseconds)
+ };
+ return configurationDescriptor;
+}
diff -r 000000000000 -r ecc3925d3f8c USBHID/USBKeyboard.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHID/USBKeyboard.h Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,183 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBKEYBOARD_H
+#define USBKEYBOARD_H
+
+#include "USBHID.h"
+#include "Stream.h"
+
+/* Modifiers */
+enum MODIFIER_KEY {
+ KEY_CTRL = 1,
+ KEY_SHIFT = 2,
+ KEY_ALT = 4,
+};
+
+
+enum MEDIA_KEY {
+ KEY_NEXT_TRACK, /*!< next Track Button */
+ KEY_PREVIOUS_TRACK, /*!< Previous track Button */
+ KEY_STOP, /*!< Stop Button */
+ KEY_PLAY_PAUSE, /*!< Play/Pause Button */
+ KEY_MUTE, /*!< Mute Button */
+ KEY_VOLUME_UP, /*!< Volume Up Button */
+ KEY_VOLUME_DOWN, /*!< Volume Down Button */
+};
+
+enum FUNCTION_KEY {
+ KEY_F1 = 128, /* F1 key */
+ KEY_F2, /* F2 key */
+ KEY_F3, /* F3 key */
+ KEY_F4, /* F4 key */
+ KEY_F5, /* F5 key */
+ KEY_F6, /* F6 key */
+ KEY_F7, /* F7 key */
+ KEY_F8, /* F8 key */
+ KEY_F9, /* F9 key */
+ KEY_F10, /* F10 key */
+ KEY_F11, /* F11 key */
+ KEY_F12, /* F12 key */
+
+ KEY_PRINT_SCREEN, /* Print Screen key */
+ KEY_SCROLL_LOCK, /* Scroll lock */
+ KEY_CAPS_LOCK, /* caps lock */
+ KEY_NUM_LOCK, /* num lock */
+ KEY_INSERT, /* Insert key */
+ KEY_HOME, /* Home key */
+ KEY_PAGE_UP, /* Page Up key */
+ KEY_PAGE_DOWN, /* Page Down key */
+
+ RIGHT_ARROW, /* Right arrow */
+ LEFT_ARROW, /* Left arrow */
+ DOWN_ARROW, /* Down arrow */
+ UP_ARROW, /* Up arrow */
+};
+
+/**
+ * USBKeyboard example
+ * @code
+ *
+ * #include "mbed.h"
+ * #include "USBKeyboard.h"
+ *
+ * USBKeyboard key;
+ *
+ * int main(void)
+ * {
+ * while (1)
+ * {
+ * key.printf("Hello World\r\n");
+ * wait(1);
+ * }
+ * }
+ *
+ * @endcode
+ */
+class USBKeyboard: public USBHID, public Stream {
+public:
+
+ /**
+ * Constructor
+ *
+ *
+ * @param leds Leds bus: first: NUM_LOCK, second: CAPS_LOCK, third: SCROLL_LOCK
+ * @param vendor_id Your vendor_id (default: 0x1235)
+ * @param product_id Your product_id (default: 0x0050)
+ * @param product_release Your preoduct_release (default: 0x0001)
+ *
+ */
+ USBKeyboard(uint16_t vendor_id = 0x1235, uint16_t product_id = 0x0050, uint16_t product_release = 0x0001):
+ USBHID(0, 0, vendor_id, product_id, product_release, false) {
+ lock_status = 0;
+ connect();
+ };
+
+ /**
+ * To send a character defined by a modifier(CTRL, SHIFT, ALT) and the key
+ *
+ * @code
+ * //To send CTRL + s (save)
+ * keyboard.keyCode('s', KEY_CTRL);
+ * @endcode
+ *
+ * @param modifier bit 0: KEY_CTRL, bit 1: KEY_SHIFT, bit 2: KEY_ALT (default: 0)
+ * @param key character to send
+ * @returns true if there is no error, false otherwise
+ */
+ bool keyCode(uint8_t key = '0',uint8_t key1 = '0',uint8_t key2 = '0',uint8_t key3 = '0',uint8_t key4 = '0',uint8_t key5 = '0', uint8_t modifier = 0);
+
+ /**
+ * Send a character
+ *
+ * @param c character to be sent
+ * @returns true if there is no error, false otherwise
+ */
+ virtual int _putc(int c);
+
+ /**
+ * Control media keys
+ *
+ * @param key media key pressed (KEY_NEXT_TRACK, KEY_PREVIOUS_TRACK, KEY_STOP, KEY_PLAY_PAUSE, KEY_MUTE, KEY_VOLUME_UP, KEY_VOLUME_DOWN)
+ * @returns true if there is no error, false otherwise
+ */
+ bool mediaControl(MEDIA_KEY key);
+
+ /*
+ * To define the report descriptor. Warning: this method has to store the length of the report descriptor in reportLength.
+ *
+ * @returns pointer to the report descriptor
+ */
+ virtual uint8_t * reportDesc();
+
+ /*
+ * Called when a data is received on the OUT endpoint. Useful to switch on LED of LOCK keys
+ *
+ * @returns if handle by subclass, return true
+ */
+ virtual bool EP1_OUT_callback();
+
+ /**
+ * Read status of lock keys. Useful to switch-on/off leds according to key pressed. Only the first three bits of the result is important:
+ * - First bit: NUM_LOCK
+ * - Second bit: CAPS_LOCK
+ * - Third bit: SCROLL_LOCK
+ *
+ * @returns status of lock keys
+ */
+ uint8_t lockStatus();
+
+protected:
+ /*
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc();
+
+private:
+ //dummy otherwise it doesn,t compile (we must define all methods of an abstract class)
+ virtual int _getc() {
+ return -1;
+ };
+
+ uint8_t lock_status;
+
+};
+
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBHID/USBMouse.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHID/USBMouse.cpp Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,245 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+#include "USBMouse.h"
+
+bool USBMouse::update(int16_t x, int16_t y, uint8_t button, int8_t z) {
+ switch (mouse_type) {
+ case REL_MOUSE:
+ while (x > 127) {
+ if (!mouseSend(127, 0, button, z)) return false;
+ x = x - 127;
+ }
+ while (x < -128) {
+ if (!mouseSend(-128, 0, button, z)) return false;
+ x = x + 128;
+ }
+ while (y > 127) {
+ if (!mouseSend(0, 127, button, z)) return false;
+ y = y - 127;
+ }
+ while (y < -128) {
+ if (!mouseSend(0, -128, button, z)) return false;
+ y = y + 128;
+ }
+ return mouseSend(x, y, button, z);
+ case ABS_MOUSE:
+ HID_REPORT report;
+
+ report.data[0] = x & 0xff;
+ report.data[1] = (x >> 8) & 0xff;
+ report.data[2] = y & 0xff;
+ report.data[3] = (y >> 8) & 0xff;
+ report.data[4] = -z;
+ report.data[5] = button & 0x07;
+
+ report.length = 6;
+
+ return send(&report);
+ default:
+ return false;
+ }
+}
+
+bool USBMouse::mouseSend(int8_t x, int8_t y, uint8_t buttons, int8_t z) {
+ HID_REPORT report;
+ report.data[0] = buttons & 0x07;
+ report.data[1] = x;
+ report.data[2] = y;
+ report.data[3] = -z; // >0 to scroll down, <0 to scroll up
+
+ report.length = 4;
+
+ return send(&report);
+}
+
+bool USBMouse::move(int16_t x, int16_t y) {
+ return update(x, y, button, 0);
+}
+
+bool USBMouse::scroll(int8_t z) {
+ return update(0, 0, button, z);
+}
+
+
+bool USBMouse::doubleClick() {
+ if (!click(MOUSE_LEFT))
+ return false;
+ wait(0.1);
+ return click(MOUSE_LEFT);
+}
+
+bool USBMouse::click(uint8_t button) {
+ if (!update(0, 0, button, 0))
+ return false;
+ wait(0.01);
+ return update(0, 0, 0, 0);
+}
+
+bool USBMouse::press(uint8_t button_) {
+ button = button_ & 0x07;
+ return update(0, 0, button, 0);
+}
+
+bool USBMouse::release(uint8_t button_) {
+ button = (button & (~button_)) & 0x07;
+ return update(0, 0, button, 0);
+}
+
+
+uint8_t * USBMouse::reportDesc() {
+
+ if (mouse_type == REL_MOUSE) {
+ static uint8_t reportDescriptor[] = {
+ USAGE_PAGE(1), 0x01, // Genric Desktop
+ USAGE(1), 0x02, // Mouse
+ COLLECTION(1), 0x01, // Application
+ USAGE(1), 0x01, // Pointer
+ COLLECTION(1), 0x00, // Physical
+
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x01,
+ USAGE_PAGE(1), 0x09, // Buttons
+ USAGE_MINIMUM(1), 0x1,
+ USAGE_MAXIMUM(1), 0x3,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ INPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x05,
+ INPUT(1), 0x01,
+
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x08,
+ USAGE_PAGE(1), 0x01,
+ USAGE(1), 0x30, // X
+ USAGE(1), 0x31, // Y
+ USAGE(1), 0x38, // scroll
+ LOGICAL_MINIMUM(1), 0x81,
+ LOGICAL_MAXIMUM(1), 0x7f,
+ INPUT(1), 0x06, // Relative data
+
+ END_COLLECTION(0),
+ END_COLLECTION(0),
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+ } else if (mouse_type == ABS_MOUSE) {
+ static uint8_t reportDescriptor[] = {
+
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x02, // Mouse
+ COLLECTION(1), 0x01, // Application
+ USAGE(1), 0x01, // Pointer
+ COLLECTION(1), 0x00, // Physical
+
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x30, // X
+ USAGE(1), 0x31, // Y
+ LOGICAL_MINIMUM(1), 0x00, // 0
+ LOGICAL_MAXIMUM(2), 0xff, 0x7f, // 32767
+ REPORT_SIZE(1), 0x10,
+ REPORT_COUNT(1), 0x02,
+ INPUT(1), 0x02, // Data, Variable, Absolute
+
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x38, // scroll
+ LOGICAL_MINIMUM(1), 0x81, // -127
+ LOGICAL_MAXIMUM(1), 0x7f, // 127
+ REPORT_SIZE(1), 0x08,
+ REPORT_COUNT(1), 0x01,
+ INPUT(1), 0x06, // Data, Variable, Relative
+
+ USAGE_PAGE(1), 0x09, // Buttons
+ USAGE_MINIMUM(1), 0x01,
+ USAGE_MAXIMUM(1), 0x03,
+ LOGICAL_MINIMUM(1), 0x00, // 0
+ LOGICAL_MAXIMUM(1), 0x01, // 1
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x01,
+ INPUT(1), 0x02, // Data, Variable, Absolute
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x05,
+ INPUT(1), 0x01, // Constant
+
+ END_COLLECTION(0),
+ END_COLLECTION(0)
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+ }
+ return NULL;
+}
+
+#define DEFAULT_CONFIGURATION (1)
+#define TOTAL_DESCRIPTOR_LENGTH ((1 * CONFIGURATION_DESCRIPTOR_LENGTH) \
+ + (1 * INTERFACE_DESCRIPTOR_LENGTH) \
+ + (1 * HID_DESCRIPTOR_LENGTH) \
+ + (2 * ENDPOINT_DESCRIPTOR_LENGTH))
+
+uint8_t * USBMouse::configurationDesc() {
+ static uint8_t configurationDescriptor[] = {
+ CONFIGURATION_DESCRIPTOR_LENGTH,// bLength
+ CONFIGURATION_DESCRIPTOR, // bDescriptorType
+ LSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (LSB)
+ MSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (MSB)
+ 0x01, // bNumInterfaces
+ DEFAULT_CONFIGURATION, // bConfigurationValue
+ 0x00, // iConfiguration
+ C_RESERVED | C_SELF_POWERED, // bmAttributes
+ C_POWER(0), // bMaxPowerHello World from Mbed
+
+ INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR, // bDescriptorType
+ 0x00, // bInterfaceNumber
+ 0x00, // bAlternateSetting
+ 0x02, // bNumEndpoints
+ HID_CLASS, // bInterfaceClass
+ 1, // bInterfaceSubClass
+ 2, // bInterfaceProtocol (mouse)
+ 0x00, // iInterface
+
+ HID_DESCRIPTOR_LENGTH, // bLength
+ HID_DESCRIPTOR, // bDescriptorType
+ LSB(HID_VERSION_1_11), // bcdHID (LSB)
+ MSB(HID_VERSION_1_11), // bcdHID (MSB)
+ 0x00, // bCountryCode
+ 0x01, // bNumDescriptors
+ REPORT_DESCRIPTOR, // bDescriptorType
+ LSB(reportDescLength()), // wDescriptorLength (LSB)
+ MSB(reportDescLength()), // wDescriptorLength (MSB)
+
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPINT_IN), // bEndpointAddress
+ E_INTERRUPT, // bmAttributes
+ LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB)
+ 1, // bInterval (milliseconds)
+
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPINT_OUT), // bEndpointAddress
+ E_INTERRUPT, // bmAttributes
+ LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB)
+ 1, // bInterval (milliseconds)
+ };
+ return configurationDescriptor;
+}
diff -r 000000000000 -r ecc3925d3f8c USBHID/USBMouse.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHID/USBMouse.h Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,209 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBMOUSE_H
+#define USBMOUSE_H
+
+#include "USBHID.h"
+
+#define REPORT_ID_MOUSE 2
+
+/* Common usage */
+
+enum MOUSE_BUTTON
+{
+ MOUSE_LEFT = 1,
+ MOUSE_RIGHT = 2,
+ MOUSE_MIDDLE = 4,
+};
+
+/* X and Y limits */
+/* These values do not directly map to screen pixels */
+/* Zero may be interpreted as meaning 'no movement' */
+#define X_MIN_ABS (1) /*!< Minimum value on x-axis */
+#define Y_MIN_ABS (1) /*!< Minimum value on y-axis */
+#define X_MAX_ABS (0x7fff) /*!< Maximum value on x-axis */
+#define Y_MAX_ABS (0x7fff) /*!< Maximum value on y-axis */
+
+#define X_MIN_REL (-127) /*!< The maximum value that we can move to the left on the x-axis */
+#define Y_MIN_REL (-127) /*!< The maximum value that we can move up on the y-axis */
+#define X_MAX_REL (127) /*!< The maximum value that we can move to the right on the x-axis */
+#define Y_MAX_REL (127) /*!< The maximum value that we can move down on the y-axis */
+
+enum MOUSE_TYPE
+{
+ ABS_MOUSE,
+ REL_MOUSE,
+};
+
+/**
+ *
+ * USBMouse example
+ * @code
+ * #include "mbed.h"
+ * #include "USBMouse.h"
+ *
+ * USBMouse mouse;
+ *
+ * int main(void)
+ * {
+ * while (1)
+ * {
+ * mouse.move(20, 0);
+ * wait(0.5);
+ * }
+ * }
+ *
+ * @endcode
+ *
+ *
+ * @code
+ * #include "mbed.h"
+ * #include "USBMouse.h"
+ * #include <math.h>
+ *
+ * USBMouse mouse(ABS_MOUSE);
+ *
+ * int main(void)
+ * {
+ * uint16_t x_center = (X_MAX_ABS - X_MIN_ABS)/2;
+ * uint16_t y_center = (Y_MAX_ABS - Y_MIN_ABS)/2;
+ * uint16_t x_screen = 0;
+ * uint16_t y_screen = 0;
+ *
+ * uint32_t x_origin = x_center;
+ * uint32_t y_origin = y_center;
+ * uint32_t radius = 5000;
+ * uint32_t angle = 0;
+ *
+ * while (1)
+ * {
+ * x_screen = x_origin + cos((double)angle*3.14/180.0)*radius;
+ * y_screen = y_origin + sin((double)angle*3.14/180.0)*radius;
+ *
+ * mouse.move(x_screen, y_screen);
+ * angle += 3;
+ * wait(0.01);
+ * }
+ * }
+ *
+ * @endcode
+ */
+class USBMouse: public USBHID
+{
+ public:
+
+ /**
+ * Constructor
+ *
+ * @param mouse_type Mouse type: ABS_MOUSE (absolute mouse) or REL_MOUSE (relative mouse) (default: REL_MOUSE)
+ * @param vendor_id Your vendor_id (default: 0x1234)
+ * @param product_id Your product_id (default: 0x0001)
+ * @param product_release Your preoduct_release (default: 0x0001)
+ *
+ */
+ USBMouse(MOUSE_TYPE mouse_type = REL_MOUSE, uint16_t vendor_id = 0x1234, uint16_t product_id = 0x0001, uint16_t product_release = 0x0001):
+ USBHID(0, 0, vendor_id, product_id, product_release, false)
+ {
+ button = 0;
+ this->mouse_type = mouse_type;
+ connect();
+ };
+
+ /**
+ * Write a state of the mouse
+ *
+ * @param x x-axis position
+ * @param y y-axis position
+ * @param buttons buttons state (first bit represents MOUSE_LEFT, second bit MOUSE_RIGHT and third bit MOUSE_MIDDLE)
+ * @param z wheel state (>0 to scroll down, <0 to scroll up)
+ * @returns true if there is no error, false otherwise
+ */
+ bool update(int16_t x, int16_t y, uint8_t buttons, int8_t z);
+
+
+ /**
+ * Move the cursor to (x, y)
+ *
+ * @param x-axis position
+ * @param y-axis position
+ * @returns true if there is no error, false otherwise
+ */
+ bool move(int16_t x, int16_t y);
+
+ /**
+ * Press one or several buttons
+ *
+ * @param button button state (ex: press(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool press(uint8_t button);
+
+ /**
+ * Release one or several buttons
+ *
+ * @param button button state (ex: release(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool release(uint8_t button);
+
+ /**
+ * Double click (MOUSE_LEFT)
+ *
+ * @returns true if there is no error, false otherwise
+ */
+ bool doubleClick();
+
+ /**
+ * Click
+ *
+ * @param button state of the buttons ( ex: clic(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool click(uint8_t button);
+
+ /**
+ * Scrolling
+ *
+ * @param z value of the wheel (>0 to go down, <0 to go up)
+ * @returns true if there is no error, false otherwise
+ */
+ bool scroll(int8_t z);
+
+ /*
+ * To define the report descriptor. Warning: this method has to store the length of the report descriptor in reportLength.
+ *
+ * @returns pointer to the report descriptor
+ */
+ virtual uint8_t * reportDesc();
+
+ protected:
+ /*
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc();
+
+ private:
+ MOUSE_TYPE mouse_type;
+ uint8_t button;
+ bool mouseSend(int8_t x, int8_t y, uint8_t buttons, int8_t z);
+};
+
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBHID/USBMouseKeyboard.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHID/USBMouseKeyboard.cpp Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,706 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+#include "USBMouseKeyboard.h"
+
+typedef struct {
+ unsigned char usage;
+ unsigned char modifier;
+} KEYMAP;
+
+#ifdef US_KEYBOARD
+/* US keyboard (as HID standard) */
+#define KEYMAP_SIZE (152)
+const KEYMAP keymap[KEYMAP_SIZE] = {
+ {0, 0}, /* NUL */
+ {0, 0}, /* SOH */
+ {0, 0}, /* STX */
+ {0, 0}, /* ETX */
+ {0, 0}, /* EOT */
+ {0, 0}, /* ENQ */
+ {0, 0}, /* ACK */
+ {0, 0}, /* BEL */
+ {0x2a, 0}, /* BS */ /* Keyboard Delete (Backspace) */
+ {0x2b, 0}, /* TAB */ /* Keyboard Tab */
+ {0x28, 0}, /* LF */ /* Keyboard Return (Enter) */
+ {0, 0}, /* VT */
+ {0, 0}, /* FF */
+ {0, 0}, /* CR */
+ {0, 0}, /* SO */
+ {0, 0}, /* SI */
+ {0, 0}, /* DEL */
+ {0, 0}, /* DC1 */
+ {0, 0}, /* DC2 */
+ {0, 0}, /* DC3 */
+ {0, 0}, /* DC4 */
+ {0, 0}, /* NAK */
+ {0, 0}, /* SYN */
+ {0, 0}, /* ETB */
+ {0, 0}, /* CAN */
+ {0, 0}, /* EM */
+ {0, 0}, /* SUB */
+ {0, 0}, /* ESC */
+ {0, 0}, /* FS */
+ {0, 0}, /* GS */
+ {0, 0}, /* RS */
+ {0, 0}, /* US */
+ {0x2c, 0}, /* */
+ {0x1e, KEY_SHIFT}, /* ! */
+ {0x34, KEY_SHIFT}, /* " */
+ {0x20, KEY_SHIFT}, /* # */
+ {0x21, KEY_SHIFT}, /* $ */
+ {0x22, KEY_SHIFT}, /* % */
+ {0x24, KEY_SHIFT}, /* & */
+ {0x34, 0}, /* ' */
+ {0x26, KEY_SHIFT}, /* ( */
+ {0x27, KEY_SHIFT}, /* ) */
+ {0x25, KEY_SHIFT}, /* * */
+ {0x2e, KEY_SHIFT}, /* + */
+ {0x36, 0}, /* , */
+ {0x2d, 0}, /* - */
+ {0x37, 0}, /* . */
+ {0x38, 0}, /* / */
+ {0x27, 0}, /* 0 */
+ {0x1e, 0}, /* 1 */
+ {0x1f, 0}, /* 2 */
+ {0x20, 0}, /* 3 */
+ {0x21, 0}, /* 4 */
+ {0x22, 0}, /* 5 */
+ {0x23, 0}, /* 6 */
+ {0x24, 0}, /* 7 */
+ {0x25, 0}, /* 8 */
+ {0x26, 0}, /* 9 */
+ {0x33, KEY_SHIFT}, /* : */
+ {0x33, 0}, /* ; */
+ {0x36, KEY_SHIFT}, /* < */
+ {0x2e, 0}, /* = */
+ {0x37, KEY_SHIFT}, /* > */
+ {0x38, KEY_SHIFT}, /* ? */
+ {0x1f, KEY_SHIFT}, /* @ */
+ {0x04, KEY_SHIFT}, /* A */
+ {0x05, KEY_SHIFT}, /* B */
+ {0x06, KEY_SHIFT}, /* C */
+ {0x07, KEY_SHIFT}, /* D */
+ {0x08, KEY_SHIFT}, /* E */
+ {0x09, KEY_SHIFT}, /* F */
+ {0x0a, KEY_SHIFT}, /* G */
+ {0x0b, KEY_SHIFT}, /* H */
+ {0x0c, KEY_SHIFT}, /* I */
+ {0x0d, KEY_SHIFT}, /* J */
+ {0x0e, KEY_SHIFT}, /* K */
+ {0x0f, KEY_SHIFT}, /* L */
+ {0x10, KEY_SHIFT}, /* M */
+ {0x11, KEY_SHIFT}, /* N */
+ {0x12, KEY_SHIFT}, /* O */
+ {0x13, KEY_SHIFT}, /* P */
+ {0x14, KEY_SHIFT}, /* Q */
+ {0x15, KEY_SHIFT}, /* R */
+ {0x16, KEY_SHIFT}, /* S */
+ {0x17, KEY_SHIFT}, /* T */
+ {0x18, KEY_SHIFT}, /* U */
+ {0x19, KEY_SHIFT}, /* V */
+ {0x1a, KEY_SHIFT}, /* W */
+ {0x1b, KEY_SHIFT}, /* X */
+ {0x1c, KEY_SHIFT}, /* Y */
+ {0x1d, KEY_SHIFT}, /* Z */
+ {0x2f, 0}, /* [ */
+ {0x31, 0}, /* \ */
+ {0x30, 0}, /* ] */
+ {0x23, KEY_SHIFT}, /* ^ */
+ {0x2d, KEY_SHIFT}, /* _ */
+ {0x35, 0}, /* ` */
+ {0x04, 0}, /* a */
+ {0x05, 0}, /* b */
+ {0x06, 0}, /* c */
+ {0x07, 0}, /* d */
+ {0x08, 0}, /* e */
+ {0x09, 0}, /* f */
+ {0x0a, 0}, /* g */
+ {0x0b, 0}, /* h */
+ {0x0c, 0}, /* i */
+ {0x0d, 0}, /* j */
+ {0x0e, 0}, /* k */
+ {0x0f, 0}, /* l */
+ {0x10, 0}, /* m */
+ {0x11, 0}, /* n */
+ {0x12, 0}, /* o */
+ {0x13, 0}, /* p */
+ {0x14, 0}, /* q */
+ {0x15, 0}, /* r */
+ {0x16, 0}, /* s */
+ {0x17, 0}, /* t */
+ {0x18, 0}, /* u */
+ {0x19, 0}, /* v */
+ {0x1a, 0}, /* w */
+ {0x1b, 0}, /* x */
+ {0x1c, 0}, /* y */
+ {0x1d, 0}, /* z */
+ {0x2f, KEY_SHIFT}, /* { */
+ {0x31, KEY_SHIFT}, /* | */
+ {0x30, KEY_SHIFT}, /* } */
+ {0x35, KEY_SHIFT}, /* ~ */
+ {0,0}, /* DEL */
+
+ {0x3a, 0}, /* F1 */
+ {0x3b, 0}, /* F2 */
+ {0x3c, 0}, /* F3 */
+ {0x3d, 0}, /* F4 */
+ {0x3e, 0}, /* F5 */
+ {0x3f, 0}, /* F6 */
+ {0x40, 0}, /* F7 */
+ {0x41, 0}, /* F8 */
+ {0x42, 0}, /* F9 */
+ {0x43, 0}, /* F10 */
+ {0x44, 0}, /* F11 */
+ {0x45, 0}, /* F12 */
+
+ {0x46, 0}, /* PRINT_SCREEN */
+ {0x47, 0}, /* SCROLL_LOCK */
+ {0x39, 0}, /* CAPS_LOCK */
+ {0x53, 0}, /* NUM_LOCK */
+ {0x49, 0}, /* INSERT */
+ {0x4a, 0}, /* HOME */
+ {0x4b, 0}, /* PAGE_UP */
+ {0x4e, 0}, /* PAGE_DOWN */
+
+ {0x4f, 0}, /* RIGHT_ARROW */
+ {0x50, 0}, /* LEFT_ARROW */
+ {0x51, 0}, /* DOWN_ARROW */
+ {0x52, 0}, /* UP_ARROW */
+};
+
+#else
+/* UK keyboard */
+#define KEYMAP_SIZE (152)
+const KEYMAP keymap[KEYMAP_SIZE] = {
+ {0, 0}, /* NUL */
+ {0, 0}, /* SOH */
+ {0, 0}, /* STX */
+ {0, 0}, /* ETX */
+ {0, 0}, /* EOT */
+ {0, 0}, /* ENQ */
+ {0, 0}, /* ACK */
+ {0, 0}, /* BEL */
+ {0x2a, 0}, /* BS */ /* Keyboard Delete (Backspace) */
+ {0x2b, 0}, /* TAB */ /* Keyboard Tab */
+ {0x28, 0}, /* LF */ /* Keyboard Return (Enter) */
+ {0, 0}, /* VT */
+ {0, 0}, /* FF */
+ {0, 0}, /* CR */
+ {0, 0}, /* SO */
+ {0, 0}, /* SI */
+ {0, 0}, /* DEL */
+ {0, 0}, /* DC1 */
+ {0, 0}, /* DC2 */
+ {0, 0}, /* DC3 */
+ {0, 0}, /* DC4 */
+ {0, 0}, /* NAK */
+ {0, 0}, /* SYN */
+ {0, 0}, /* ETB */
+ {0, 0}, /* CAN */
+ {0, 0}, /* EM */
+ {0, 0}, /* SUB */
+ {0, 0}, /* ESC */
+ {0, 0}, /* FS */
+ {0, 0}, /* GS */
+ {0, 0}, /* RS */
+ {0, 0}, /* US */
+ {0x2c, 0}, /* */
+ {0x1e, KEY_SHIFT}, /* ! */
+ {0x1f, KEY_SHIFT}, /* " */
+ {0x32, 0}, /* # */
+ {0x21, KEY_SHIFT}, /* $ */
+ {0x22, KEY_SHIFT}, /* % */
+ {0x24, KEY_SHIFT}, /* & */
+ {0x34, 0}, /* ' */
+ {0x26, KEY_SHIFT}, /* ( */
+ {0x27, KEY_SHIFT}, /* ) */
+ {0x25, KEY_SHIFT}, /* * */
+ {0x2e, KEY_SHIFT}, /* + */
+ {0x36, 0}, /* , */
+ {0x2d, 0}, /* - */
+ {0x37, 0}, /* . */
+ {0x38, 0}, /* / */
+ {0x27, 0}, /* 0 */
+ {0x1e, 0}, /* 1 */
+ {0x1f, 0}, /* 2 */
+ {0x20, 0}, /* 3 */
+ {0x21, 0}, /* 4 */
+ {0x22, 0}, /* 5 */
+ {0x23, 0}, /* 6 */
+ {0x24, 0}, /* 7 */
+ {0x25, 0}, /* 8 */
+ {0x26, 0}, /* 9 */
+ {0x33, KEY_SHIFT}, /* : */
+ {0x33, 0}, /* ; */
+ {0x36, KEY_SHIFT}, /* < */
+ {0x2e, 0}, /* = */
+ {0x37, KEY_SHIFT}, /* > */
+ {0x38, KEY_SHIFT}, /* ? */
+ {0x34, KEY_SHIFT}, /* @ */
+ {0x04, KEY_SHIFT}, /* A */
+ {0x05, KEY_SHIFT}, /* B */
+ {0x06, KEY_SHIFT}, /* C */
+ {0x07, KEY_SHIFT}, /* D */
+ {0x08, KEY_SHIFT}, /* E */
+ {0x09, KEY_SHIFT}, /* F */
+ {0x0a, KEY_SHIFT}, /* G */
+ {0x0b, KEY_SHIFT}, /* H */
+ {0x0c, KEY_SHIFT}, /* I */
+ {0x0d, KEY_SHIFT}, /* J */
+ {0x0e, KEY_SHIFT}, /* K */
+ {0x0f, KEY_SHIFT}, /* L */
+ {0x10, KEY_SHIFT}, /* M */
+ {0x11, KEY_SHIFT}, /* N */
+ {0x12, KEY_SHIFT}, /* O */
+ {0x13, KEY_SHIFT}, /* P */
+ {0x14, KEY_SHIFT}, /* Q */
+ {0x15, KEY_SHIFT}, /* R */
+ {0x16, KEY_SHIFT}, /* S */
+ {0x17, KEY_SHIFT}, /* T */
+ {0x18, KEY_SHIFT}, /* U */
+ {0x19, KEY_SHIFT}, /* V */
+ {0x1a, KEY_SHIFT}, /* W */
+ {0x1b, KEY_SHIFT}, /* X */
+ {0x1c, KEY_SHIFT}, /* Y */
+ {0x1d, KEY_SHIFT}, /* Z */
+ {0x2f, 0}, /* [ */
+ {0x64, 0}, /* \ */
+ {0x30, 0}, /* ] */
+ {0x23, KEY_SHIFT}, /* ^ */
+ {0x2d, KEY_SHIFT}, /* _ */
+ {0x35, 0}, /* ` */
+ {0x04, 0}, /* a */
+ {0x05, 0}, /* b */
+ {0x06, 0}, /* c */
+ {0x07, 0}, /* d */
+ {0x08, 0}, /* e */
+ {0x09, 0}, /* f */
+ {0x0a, 0}, /* g */
+ {0x0b, 0}, /* h */
+ {0x0c, 0}, /* i */
+ {0x0d, 0}, /* j */
+ {0x0e, 0}, /* k */
+ {0x0f, 0}, /* l */
+ {0x10, 0}, /* m */
+ {0x11, 0}, /* n */
+ {0x12, 0}, /* o */
+ {0x13, 0}, /* p */
+ {0x14, 0}, /* q */
+ {0x15, 0}, /* r */
+ {0x16, 0}, /* s */
+ {0x17, 0}, /* t */
+ {0x18, 0}, /* u */
+ {0x19, 0}, /* v */
+ {0x1a, 0}, /* w */
+ {0x1b, 0}, /* x */
+ {0x1c, 0}, /* y */
+ {0x1d, 0}, /* z */
+ {0x2f, KEY_SHIFT}, /* { */
+ {0x64, KEY_SHIFT}, /* | */
+ {0x30, KEY_SHIFT}, /* } */
+ {0x32, KEY_SHIFT}, /* ~ */
+ {0,0}, /* DEL */
+
+ {0x3a, 0}, /* F1 */
+ {0x3b, 0}, /* F2 */
+ {0x3c, 0}, /* F3 */
+ {0x3d, 0}, /* F4 */
+ {0x3e, 0}, /* F5 */
+ {0x3f, 0}, /* F6 */
+ {0x40, 0}, /* F7 */
+ {0x41, 0}, /* F8 */
+ {0x42, 0}, /* F9 */
+ {0x43, 0}, /* F10 */
+ {0x44, 0}, /* F11 */
+ {0x45, 0}, /* F12 */
+
+ {0x46, 0}, /* PRINT_SCREEN */
+ {0x47, 0}, /* SCROLL_LOCK */
+ {0x39, 0}, /* CAPS_LOCK */
+ {0x53, 0}, /* NUM_LOCK */
+ {0x49, 0}, /* INSERT */
+ {0x4a, 0}, /* HOME */
+ {0x4b, 0}, /* PAGE_UP */
+ {0x4e, 0}, /* PAGE_DOWN */
+
+ {0x4f, 0}, /* RIGHT_ARROW */
+ {0x50, 0}, /* LEFT_ARROW */
+ {0x51, 0}, /* DOWN_ARROW */
+ {0x52, 0}, /* UP_ARROW */
+};
+#endif
+
+
+uint8_t * USBMouseKeyboard::reportDesc() {
+ if (mouse_type == REL_MOUSE) {
+ static uint8_t reportDescriptor[] = {
+ // Keyboard
+ USAGE_PAGE(1), 0x01,
+ USAGE(1), 0x06,
+ COLLECTION(1), 0x01,
+ REPORT_ID(1), REPORT_ID_KEYBOARD,
+ USAGE_PAGE(1), 0x07,
+ USAGE_MINIMUM(1), 0xE0,
+ USAGE_MAXIMUM(1), 0xE7,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x08,
+ INPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x08,
+ INPUT(1), 0x01,
+ REPORT_COUNT(1), 0x05,
+ REPORT_SIZE(1), 0x01,
+ USAGE_PAGE(1), 0x08,
+ USAGE_MINIMUM(1), 0x01,
+ USAGE_MAXIMUM(1), 0x05,
+ OUTPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x03,
+ OUTPUT(1), 0x01,
+ REPORT_COUNT(1), 0x06,
+ REPORT_SIZE(1), 0x08,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(2), 0xff, 0x00,
+ USAGE_PAGE(1), 0x07,
+ USAGE_MINIMUM(1), 0x00,
+ USAGE_MAXIMUM(2), 0xff, 0x00,
+ INPUT(1), 0x00,
+ END_COLLECTION(0),
+
+ // Mouse
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x02, // Mouse
+ COLLECTION(1), 0x01, // Application
+ USAGE(1), 0x01, // Pointer
+ COLLECTION(1), 0x00, // Physical
+ REPORT_ID(1), REPORT_ID_MOUSE,
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x01,
+ USAGE_PAGE(1), 0x09, // Buttons
+ USAGE_MINIMUM(1), 0x1,
+ USAGE_MAXIMUM(1), 0x3,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ INPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x05,
+ INPUT(1), 0x01,
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x08,
+ USAGE_PAGE(1), 0x01,
+ USAGE(1), 0x30, // X
+ USAGE(1), 0x31, // Y
+ USAGE(1), 0x38, // scroll
+ LOGICAL_MINIMUM(1), 0x81,
+ LOGICAL_MAXIMUM(1), 0x7f,
+ INPUT(1), 0x06,
+ END_COLLECTION(0),
+ END_COLLECTION(0),
+
+
+ // Media Control
+ USAGE_PAGE(1), 0x0C,
+ USAGE(1), 0x01,
+ COLLECTION(1), 0x01,
+ REPORT_ID(1), REPORT_ID_VOLUME,
+ USAGE_PAGE(1), 0x0C,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x07,
+ USAGE(1), 0xB5, // Next Track
+ USAGE(1), 0xB6, // Previous Track
+ USAGE(1), 0xB7, // Stop
+ USAGE(1), 0xCD, // Play / Pause
+ USAGE(1), 0xE2, // Mute
+ USAGE(1), 0xE9, // Volume Up
+ USAGE(1), 0xEA, // Volume Down
+ INPUT(1), 0x02, // Input (Data, Variable, Absolute)
+ REPORT_COUNT(1), 0x01,
+ INPUT(1), 0x01,
+ END_COLLECTION(0),
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+ } else if (mouse_type == ABS_MOUSE) {
+ static uint8_t reportDescriptor[] = {
+
+ // Keyboard
+ USAGE_PAGE(1), 0x01,
+ USAGE(1), 0x06,
+ COLLECTION(1), 0x01,
+ REPORT_ID(1), REPORT_ID_KEYBOARD,
+ USAGE_PAGE(1), 0x07,
+ USAGE_MINIMUM(1), 0xE0,
+ USAGE_MAXIMUM(1), 0xE7,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x08,
+ INPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x08,
+ INPUT(1), 0x01,
+ REPORT_COUNT(1), 0x05,
+ REPORT_SIZE(1), 0x01,
+ USAGE_PAGE(1), 0x08,
+ USAGE_MINIMUM(1), 0x01,
+ USAGE_MAXIMUM(1), 0x05,
+ OUTPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x03,
+ OUTPUT(1), 0x01,
+ REPORT_COUNT(1), 0x06,
+ REPORT_SIZE(1), 0x08,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(2), 0xff, 0x00,
+ USAGE_PAGE(1), 0x07,
+ USAGE_MINIMUM(1), 0x00,
+ USAGE_MAXIMUM(2), 0xff, 0x00,
+ INPUT(1), 0x00,
+ END_COLLECTION(0),
+
+ // Mouse
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x02, // Mouse
+ COLLECTION(1), 0x01, // Application
+ USAGE(1), 0x01, // Pointer
+ COLLECTION(1), 0x00, // Physical
+ REPORT_ID(1), REPORT_ID_MOUSE,
+
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x30, // X
+ USAGE(1), 0x31, // Y
+ LOGICAL_MINIMUM(1), 0x00, // 0
+ LOGICAL_MAXIMUM(2), 0xff, 0x7f, // 32767
+ REPORT_SIZE(1), 0x10,
+ REPORT_COUNT(1), 0x02,
+ INPUT(1), 0x02, // Data, Variable, Absolute
+
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x38, // scroll
+ LOGICAL_MINIMUM(1), 0x81, // -127
+ LOGICAL_MAXIMUM(1), 0x7f, // 127
+ REPORT_SIZE(1), 0x08,
+ REPORT_COUNT(1), 0x01,
+ INPUT(1), 0x06, // Data, Variable, Relative
+
+ USAGE_PAGE(1), 0x09, // Buttons
+ USAGE_MINIMUM(1), 0x01,
+ USAGE_MAXIMUM(1), 0x03,
+ LOGICAL_MINIMUM(1), 0x00, // 0
+ LOGICAL_MAXIMUM(1), 0x01, // 1
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x01,
+ INPUT(1), 0x02, // Data, Variable, Absolute
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x05,
+ INPUT(1), 0x01, // Constant
+
+ END_COLLECTION(0),
+ END_COLLECTION(0),
+
+ // Media Control
+ USAGE_PAGE(1), 0x0C,
+ USAGE(1), 0x01,
+ COLLECTION(1), 0x01,
+ REPORT_ID(1), REPORT_ID_VOLUME,
+ USAGE_PAGE(1), 0x0C,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x07,
+ USAGE(1), 0xB5, // Next Track
+ USAGE(1), 0xB6, // Previous Track
+ USAGE(1), 0xB7, // Stop
+ USAGE(1), 0xCD, // Play / Pause
+ USAGE(1), 0xE2, // Mute
+ USAGE(1), 0xE9, // Volume Up
+ USAGE(1), 0xEA, // Volume Down
+ INPUT(1), 0x02, // Input (Data, Variable, Absolute)
+ REPORT_COUNT(1), 0x01,
+ INPUT(1), 0x01,
+ END_COLLECTION(0),
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+ }
+
+ return NULL;
+}
+
+bool USBMouseKeyboard::EP1_OUT_callback() {
+ uint32_t bytesRead = 0;
+ uint8_t led[65];
+ USBDevice::readEP(EPINT_OUT, led, &bytesRead, MAX_HID_REPORT_SIZE);
+
+ // we take led[1] because led[0] is the report ID
+ lock_status = led[1] & 0x07;
+
+ // We activate the endpoint to be able to recceive data
+ if (!readStart(EPINT_OUT, MAX_HID_REPORT_SIZE))
+ return false;
+ return true;
+}
+
+uint8_t USBMouseKeyboard::lockStatus() {
+ return lock_status;
+}
+
+bool USBMouseKeyboard::update(int16_t x, int16_t y, uint8_t button, int8_t z) {
+ switch (mouse_type) {
+ case REL_MOUSE:
+ while (x > 127) {
+ if (!mouseSend(127, 0, button, z)) return false;
+ x = x - 127;
+ }
+ while (x < -128) {
+ if (!mouseSend(-128, 0, button, z)) return false;
+ x = x + 128;
+ }
+ while (y > 127) {
+ if (!mouseSend(0, 127, button, z)) return false;
+ y = y - 127;
+ }
+ while (y < -128) {
+ if (!mouseSend(0, -128, button, z)) return false;
+ y = y + 128;
+ }
+ return mouseSend(x, y, button, z);
+ case ABS_MOUSE:
+ HID_REPORT report;
+
+ report.data[0] = REPORT_ID_MOUSE;
+ report.data[1] = x & 0xff;
+ report.data[2] = (x >> 8) & 0xff;
+ report.data[3] = y & 0xff;
+ report.data[4] = (y >> 8) & 0xff;
+ report.data[5] = -z;
+ report.data[6] = button & 0x07;
+
+ report.length = 7;
+
+ return send(&report);
+ default:
+ return false;
+ }
+}
+
+bool USBMouseKeyboard::mouseSend(int8_t x, int8_t y, uint8_t buttons, int8_t z) {
+ HID_REPORT report;
+ report.data[0] = REPORT_ID_MOUSE;
+ report.data[1] = buttons & 0x07;
+ report.data[2] = x;
+ report.data[3] = y;
+ report.data[4] = -z; // >0 to scroll down, <0 to scroll up
+
+ report.length = 5;
+
+ return send(&report);
+}
+
+bool USBMouseKeyboard::move(int16_t x, int16_t y) {
+ return update(x, y, button, 0);
+}
+
+bool USBMouseKeyboard::scroll(int8_t z) {
+ return update(0, 0, button, z);
+}
+
+bool USBMouseKeyboard::doubleClick() {
+ if (!click(MOUSE_LEFT))
+ return false;
+ wait(0.1);
+ return click(MOUSE_LEFT);
+}
+
+bool USBMouseKeyboard::click(uint8_t button) {
+ if (!update(0, 0, button, 0))
+ return false;
+ wait(0.01);
+ return update(0, 0, 0, 0);
+}
+
+bool USBMouseKeyboard::press(uint8_t button_) {
+ button = button_ & 0x07;
+ return update(0, 0, button, 0);
+}
+
+bool USBMouseKeyboard::release(uint8_t button_) {
+ button = (button & (~button_)) & 0x07;
+ return update(0, 0, button, 0);
+}
+
+int USBMouseKeyboard::_putc(int c) {
+ return keyCode(c, keymap[c].modifier);
+}
+
+bool USBMouseKeyboard::keyCode(uint8_t key, uint8_t modifier) {
+ // Send a simulated keyboard keypress. Returns true if successful.
+
+ HID_REPORT report;
+
+ report.data[0] = REPORT_ID_KEYBOARD;
+ report.data[1] = modifier;
+ report.data[2] = 0;
+ report.data[3] = keymap[key].usage;
+ report.data[4] = 0;
+ report.data[5] = 0;
+ report.data[6] = 0;
+ report.data[7] = 0;
+ report.data[8] = 0;
+
+ report.length = 9;
+
+ if (!send(&report)) {
+ return false;
+ }
+
+ report.data[1] = 0;
+ report.data[3] = 0;
+
+ if (!send(&report)) {
+ return false;
+ }
+
+ return true;
+
+}
+
+
+bool USBMouseKeyboard::mediaControl(MEDIA_KEY key) {
+ HID_REPORT report;
+
+ report.data[0] = REPORT_ID_VOLUME;
+ report.data[1] = (1 << key) & 0x7f;
+
+ report.length = 2;
+
+ send(&report);
+
+ report.data[0] = REPORT_ID_VOLUME;
+ report.data[1] = 0;
+
+ report.length = 2;
+
+ return send(&report);
+}
diff -r 000000000000 -r ecc3925d3f8c USBHID/USBMouseKeyboard.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHID/USBMouseKeyboard.h Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,220 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBMOUSEKEYBOARD_H
+#define USBMOUSEKEYBOARD_H
+
+#define REPORT_ID_KEYBOARD 1
+#define REPORT_ID_MOUSE 2
+#define REPORT_ID_VOLUME 3
+
+#include "USBMouse.h"
+#include "USBKeyboard.h"
+#include "Stream.h"
+#include "USBHID.h"
+
+/**
+ * USBMouseKeyboard example
+ * @code
+ *
+ * #include "mbed.h"
+ * #include "USBMouseKeyboard.h"
+ *
+ * USBMouseKeyboard key_mouse;
+ *
+ * int main(void)
+ * {
+ * while(1)
+ * {
+ * key_mouse.move(20, 0);
+ * key_mouse.printf("Hello From MBED\r\n");
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ *
+ *
+ * @code
+ *
+ * #include "mbed.h"
+ * #include "USBMouseKeyboard.h"
+ *
+ * USBMouseKeyboard key_mouse(ABS_MOUSE);
+ *
+ * int main(void)
+ * {
+ * while(1)
+ * {
+ * key_mouse.move(X_MAX_ABS/2, Y_MAX_ABS/2);
+ * key_mouse.printf("Hello from MBED\r\n");
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+class USBMouseKeyboard: public USBHID, public Stream
+{
+ public:
+
+ /**
+ * Constructor
+ *
+ * @param mouse_type Mouse type: ABS_MOUSE (absolute mouse) or REL_MOUSE (relative mouse) (default: REL_MOUSE)
+ * @param leds Leds bus: first: NUM_LOCK, second: CAPS_LOCK, third: SCROLL_LOCK
+ * @param vendor_id Your vendor_id (default: 0x1234)
+ * @param product_id Your product_id (default: 0x0001)
+ * @param product_release Your preoduct_release (default: 0x0001)
+ *
+ */
+ USBMouseKeyboard(MOUSE_TYPE mouse_type = REL_MOUSE, uint16_t vendor_id = 0x0021, uint16_t product_id = 0x0011, uint16_t product_release = 0x0001):
+ USBHID(0, 0, vendor_id, product_id, product_release, false)
+ {
+ lock_status = 0;
+ button = 0;
+ this->mouse_type = mouse_type;
+ connect();
+ };
+
+ /**
+ * Write a state of the mouse
+ *
+ * @param x x-axis position
+ * @param y y-axis position
+ * @param buttons buttons state (first bit represents MOUSE_LEFT, second bit MOUSE_RIGHT and third bit MOUSE_MIDDLE)
+ * @param z wheel state (>0 to scroll down, <0 to scroll up)
+ * @returns true if there is no error, false otherwise
+ */
+ bool update(int16_t x, int16_t y, uint8_t buttons, int8_t z);
+
+
+ /**
+ * Move the cursor to (x, y)
+ *
+ * @param x x-axis position
+ * @param y y-axis position
+ * @returns true if there is no error, false otherwise
+ */
+ bool move(int16_t x, int16_t y);
+
+ /**
+ * Press one or several buttons
+ *
+ * @param button button state (ex: press(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool press(uint8_t button);
+
+ /**
+ * Release one or several buttons
+ *
+ * @param button button state (ex: release(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool release(uint8_t button);
+
+ /**
+ * Double click (MOUSE_LEFT)
+ *
+ * @returns true if there is no error, false otherwise
+ */
+ bool doubleClick();
+
+ /**
+ * Click
+ *
+ * @param button state of the buttons ( ex: clic(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool click(uint8_t button);
+
+ /**
+ * Scrolling
+ *
+ * @param z value of the wheel (>0 to go down, <0 to go up)
+ * @returns true if there is no error, false otherwise
+ */
+ bool scroll(int8_t z);
+
+ /**
+ * To send a character defined by a modifier(CTRL, SHIFT, ALT) and the key
+ *
+ * @code
+ * //To send CTRL + s (save)
+ * keyboard.keyCode('s', KEY_CTRL);
+ * @endcode
+ *
+ * @param modifier bit 0: KEY_CTRL, bit 1: KEY_SHIFT, bit 2: KEY_ALT (default: 0)
+ * @param key character to send
+ * @returns true if there is no error, false otherwise
+ */
+ bool keyCode(uint8_t key, uint8_t modifier = 0);
+
+ /**
+ * Send a character
+ *
+ * @param c character to be sent
+ * @returns true if there is no error, false otherwise
+ */
+ virtual int _putc(int c);
+
+ /**
+ * Control media keys
+ *
+ * @param key media key pressed (KEY_NEXT_TRACK, KEY_PREVIOUS_TRACK, KEY_STOP, KEY_PLAY_PAUSE, KEY_MUTE, KEY_VOLUME_UP, KEY_VOLUME_DOWN)
+ * @returns true if there is no error, false otherwise
+ */
+ bool mediaControl(MEDIA_KEY key);
+
+ /**
+ * Read status of lock keys. Useful to switch-on/off leds according to key pressed. Only the first three bits of the result is important:
+ * - First bit: NUM_LOCK
+ * - Second bit: CAPS_LOCK
+ * - Third bit: SCROLL_LOCK
+ *
+ * @returns status of lock keys
+ */
+ uint8_t lockStatus();
+
+ /*
+ * To define the report descriptor. Warning: this method has to store the length of the report descriptor in reportLength.
+ *
+ * @returns pointer to the report descriptor
+ */
+ virtual uint8_t * reportDesc();
+
+ /*
+ * Called when a data is received on the OUT endpoint. Useful to switch on LED of LOCK keys
+ *
+ * @returns if handle by subclass, return true
+ */
+ virtual bool EP1_OUT_callback();
+
+
+ private:
+ bool mouseWrite(int8_t x, int8_t y, uint8_t buttons, int8_t z);
+ MOUSE_TYPE mouse_type;
+ uint8_t button;
+ bool mouseSend(int8_t x, int8_t y, uint8_t buttons, int8_t z);
+
+ uint8_t lock_status;
+
+ //dummy otherwise it doesn't compile (we must define all methods of an abstract class)
+ virtual int _getc() { return -1;}
+};
+
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBMIDI/MIDIMessage.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBMIDI/MIDIMessage.h Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,250 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef MIDIMESSAGE_H
+#define MIDIMESSAGE_H
+
+#include "mbed.h"
+
+// MIDI Message Format
+//
+// [ msg(4) | channel(4) ] [ 0 | n(7) ] [ 0 | m(7) ]
+//
+// MIDI Data Messages (Channel Specific)
+//
+// Message msg n m
+// ---------------------------------------------
+// Note Off 0x8 Key Velocity
+// Note On 0x9 Key Velocity
+// Polyphonic Aftertouch 0xA Key Pressure
+// Control Change 0xB Controller Value
+// Program Change 0xC Program -
+// Channel Aftertouch 0xD Pressure -
+// Pitch Wheel 0xE LSB MSB
+
+#define CABLE_NUM (0<<4)
+
+/** A MIDI message container */
+class MIDIMessage {
+public:
+ MIDIMessage() {}
+
+ MIDIMessage(uint8_t *buf) {
+ *((uint32_t *)data) = *((uint32_t *)buf);
+ }
+
+ // create messages
+
+ /** Create a NoteOff message
+ * @param key Key ID
+ * @param velocity Key velocity (0-127, default = 127)
+ * @param channel Key channel (0-15, default 0)
+ * @returns A MIDIMessage
+ */
+ static MIDIMessage NoteOff(int key, int velocity = 127, int channel = 0) {
+ MIDIMessage msg;
+ msg.data[0] = CABLE_NUM | 0x08;
+ msg.data[1] = 0x80 | (channel & 0x0F);
+ msg.data[2] = key & 0x7F;
+ msg.data[3] = velocity & 0x7F;
+ return msg;
+ }
+
+ /** Create a NoteOn message
+ * @param key Key ID
+ * @param velocity Key velocity (0-127, default = 127)
+ * @param channel Key channel (0-15, default 0)
+ * @returns A MIDIMessage
+ */
+ static MIDIMessage NoteOn(int key, int velocity = 127, int channel = 0) {
+ MIDIMessage msg;
+ msg.data[0] = CABLE_NUM | 0x09;
+ msg.data[1] = 0x90 | (channel & 0x0F);
+ msg.data[2] = key & 0x7F;
+ msg.data[3] = velocity & 0x7F;
+ return msg;
+ }
+
+ /** Create a PolyPhonic Aftertouch message
+ * @param key Key ID
+ * @param pressure Aftertouch pressure (0-127)
+ * @param channel Key channel (0-15, default 0)
+ * @returns A MIDIMessage
+ */
+ static MIDIMessage PolyphonicAftertouch(int key, int pressure, int channel = 0) {
+ MIDIMessage msg;
+ msg.data[0] = CABLE_NUM | 0x0A;
+ msg.data[1] = 0xA0 | (channel & 0x0F);
+ msg.data[2] = key & 0x7F;
+ msg.data[3] = pressure & 0x7F;
+ return msg;
+ }
+
+ /** Create a Control Change message
+ * @param control Controller ID
+ * @param value Controller value (0-127)
+ * @param channel Controller channel (0-15, default 0)
+ * @returns A MIDIMessage
+ */
+ static MIDIMessage ControlChange(int control, int value, int channel = 0) {
+ MIDIMessage msg;
+ msg.data[0] = CABLE_NUM | 0x0B;
+ msg.data[1] = 0xB0 | (channel & 0x0F);
+ msg.data[2] = control & 0x7F;
+ msg.data[3] = value & 0x7F;
+ return msg;
+ }
+
+ /** Create a Program Change message
+ * @param program Program ID
+ * @param channel Channel (0-15, default 0)
+ * @returns A MIDIMessage
+ */
+ static MIDIMessage ProgramChange(int program, int channel = 0) {
+ MIDIMessage msg;
+ msg.data[0] = CABLE_NUM | 0x0C;
+ msg.data[1] = 0xC0 | (channel & 0x0F);
+ msg.data[2] = program & 0x7F;
+ msg.data[3] = 0x00;
+ return msg;
+ }
+
+ /** Create a Channel Aftertouch message
+ * @param pressure Pressure
+ * @param channel Key channel (0-15, default 0)
+ * @returns A MIDIMessage
+ */
+ static MIDIMessage ChannelAftertouch(int pressure, int channel = 0) {
+ MIDIMessage msg;
+ msg.data[0] = CABLE_NUM | 0x0D;
+ msg.data[1] = 0xD0 | (channel & 0x0F);
+ msg.data[2] = pressure & 0x7F;
+ msg.data[3] = 0x00;
+ return msg;
+ }
+
+ /** Create a Pitch Wheel message
+ * @param pitch Pitch (-8192 - 8191, default = 0)
+ * @param channel Channel (0-15, default 0)
+ * @returns A MIDIMessage
+ */
+ static MIDIMessage PitchWheel(int pitch = 0, int channel = 0) {
+ MIDIMessage msg;
+ int p = pitch + 8192; // 0 - 16383, 8192 is center
+ msg.data[0] = CABLE_NUM | 0x0E;
+ msg.data[1] = 0xE0 | (channel & 0x0F);
+ msg.data[2] = p & 0x7F;
+ msg.data[3] = (p >> 7) & 0x7F;
+ return msg;
+ }
+
+ /** Create an All Notes Off message
+ * @param channel Channel (0-15, default 0)
+ * @returns A MIDIMessage
+ */
+ static MIDIMessage AllNotesOff(int channel = 0) {
+ return ControlChange(123, 0, channel);
+ }
+
+ // decode messages
+
+ /** MIDI Message Types */
+ enum MIDIMessageType {
+ ErrorType,
+ NoteOffType,
+ NoteOnType,
+ PolyphonicAftertouchType,
+ ControlChangeType,
+ ProgramChangeType,
+ ChannelAftertouchType,
+ PitchWheelType,
+ AllNotesOffType
+ };
+
+ /** Read the message type
+ * @returns MIDIMessageType
+ */
+ MIDIMessageType type() {
+ switch((data[1] >> 4) & 0xF) {
+ case 0x8: return NoteOffType;
+ case 0x9: return NoteOnType;
+ case 0xA: return PolyphonicAftertouchType;
+ case 0xB:
+ if(controller() < 120) { // standard controllers
+ return ControlChangeType;
+ } else if(controller() == 123) {
+ return AllNotesOffType;
+ } else {
+ return ErrorType; // unsupported atm
+ }
+ case 0xC: return ProgramChangeType;
+ case 0xD: return ChannelAftertouchType;
+ case 0xE: return PitchWheelType;
+ default: return ErrorType;
+ }
+ }
+
+ /** Read the channel number */
+ int channel() {
+ return (data[1] & 0x0F);
+ }
+
+ /** Read the key ID */
+ int key() {
+ return (data[2] & 0x7F);
+ }
+
+ /** Read the velocity */
+ int velocity() {
+ return (data[3] & 0x7F);
+ }
+
+ /** Read the controller value */
+ int value() {
+ return (data[3] & 0x7F);
+ }
+
+ /** Read the aftertouch pressure */
+ int pressure() {
+ if(type() == PolyphonicAftertouchType) {
+ return (data[3] & 0x7F);
+ } else {
+ return (data[2] & 0x7F);
+ }
+ }
+
+ /** Read the controller number */
+ int controller() {
+ return (data[2] & 0x7F);
+ }
+
+ /** Read the program number */
+ int program() {
+ return (data[2] & 0x7F);
+ }
+
+ /** Read the pitch value */
+ int pitch() {
+ int p = ((data[3] & 0x7F) << 7) | (data[2] & 0x7F);
+ return p - 8192; // 0 - 16383, 8192 is center
+ }
+
+ uint8_t data[4];
+};
+
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBMIDI/USBMIDI.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBMIDI/USBMIDI.cpp Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,121 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+#include "USBMIDI.h"
+
+
+USBMIDI::USBMIDI(uint16_t vendor_id, uint16_t product_id, uint16_t product_release): USBDevice(vendor_id, product_id, product_release) {
+ midi_evt = NULL;
+ USBDevice::connect();
+}
+
+void USBMIDI::write(MIDIMessage m) {
+ USBDevice::write(EPBULK_IN, m.data, 4, MAX_PACKET_SIZE_EPBULK);
+}
+
+
+void USBMIDI::attach(void (*fptr)(MIDIMessage)) {
+ midi_evt = fptr;
+}
+
+
+bool USBMIDI::EP2_OUT_callback() {
+ uint8_t buf[64];
+ uint32_t len;
+ readEP(EPBULK_OUT, buf, &len, 64);
+
+ if (midi_evt != NULL) {
+ for (int i=0; i<len; i+=4) {
+ midi_evt(MIDIMessage(buf+i));
+ }
+ }
+
+ // We reactivate the endpoint to receive next characters
+ readStart(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+ return true;
+}
+
+
+
+// Called in ISR context
+// Set configuration. Return false if the
+// configuration is not supported.
+bool USBMIDI::USBCallback_setConfiguration(uint8_t configuration) {
+ if (configuration != DEFAULT_CONFIGURATION) {
+ return false;
+ }
+
+ // Configure endpoints > 0
+ addEndpoint(EPBULK_IN, MAX_PACKET_SIZE_EPBULK);
+ addEndpoint(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+
+ // We activate the endpoint to be able to receive data
+ readStart(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+ return true;
+}
+
+
+uint8_t * USBMIDI::stringIinterfaceDesc() {
+ static uint8_t stringIinterfaceDescriptor[] = {
+ 0x0c, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'A',0,'u',0,'d',0,'i',0,'o',0 //bString iInterface - Audio
+ };
+ return stringIinterfaceDescriptor;
+}
+
+uint8_t * USBMIDI::stringIproductDesc() {
+ static uint8_t stringIproductDescriptor[] = {
+ 0x16, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'M',0,'b',0,'e',0,'d',0,' ',0,'A',0,'u',0,'d',0,'i',0,'o',0 //bString iProduct - Mbed Audio
+ };
+ return stringIproductDescriptor;
+}
+
+
+uint8_t * USBMIDI::configurationDesc() {
+ static uint8_t configDescriptor[] = {
+ // configuration descriptor
+ 0x09, 0x02, 0x65, 0x00, 0x02, 0x01, 0x00, 0xc0, 0x50,
+
+ // The Audio Interface Collection
+ 0x09, 0x04, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, // Standard AC Interface Descriptor
+ 0x09, 0x24, 0x01, 0x00, 0x01, 0x09, 0x00, 0x01, 0x01, // Class-specific AC Interface Descriptor
+ 0x09, 0x04, 0x01, 0x00, 0x02, 0x01, 0x03, 0x00, 0x00, // MIDIStreaming Interface Descriptors
+ 0x07, 0x24, 0x01, 0x00, 0x01, 0x41, 0x00, // Class-Specific MS Interface Header Descriptor
+
+ // MIDI IN JACKS
+ 0x06, 0x24, 0x02, 0x01, 0x01, 0x00,
+ 0x06, 0x24, 0x02, 0x02, 0x02, 0x00,
+
+ // MIDI OUT JACKS
+ 0x09, 0x24, 0x03, 0x01, 0x03, 0x01, 0x02, 0x01, 0x00,
+ 0x09, 0x24, 0x03, 0x02, 0x06, 0x01, 0x01, 0x01, 0x00,
+
+ // OUT endpoint descriptor
+ 0x09, 0x05, 0x02, 0x02, 0x40, 0x00, 0x00, 0x00, 0x00,
+ 0x05, 0x25, 0x01, 0x01, 0x01,
+
+ // IN endpoint descriptor
+ 0x09, 0x05, 0x82, 0x02, 0x40, 0x00, 0x00, 0x00, 0x00,
+ 0x05, 0x25, 0x01, 0x01, 0x03,
+ };
+ return configDescriptor;
+}
diff -r 000000000000 -r ecc3925d3f8c USBMIDI/USBMIDI.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBMIDI/USBMIDI.h Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,109 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBMIDI_H
+#define USBMIDI_H
+
+/* These headers are included for child class. */
+#include "USBEndpoints.h"
+#include "USBDescriptor.h"
+#include "USBDevice_Types.h"
+
+#include "USBDevice.h"
+#include "MIDIMessage.h"
+
+#define DEFAULT_CONFIGURATION (1)
+
+/**
+* USBMIDI example
+*
+* @code
+* #include "mbed.h"
+* #include "USBMIDI.h"
+*
+* USBMIDI midi;
+*
+* int main() {
+* while (1) {
+* for(int i=48; i<83; i++) { // send some messages!
+* midi.write(MIDIMessage::NoteOn(i));
+* wait(0.25);
+* midi.write(MIDIMessage::NoteOff(i));
+* wait(0.5);
+* }
+* }
+* }
+* @endcode
+*/
+class USBMIDI: public USBDevice {
+public:
+
+ /**
+ * Constructor
+ *
+ * @param vendor_id Your vendor_id
+ * @param product_id Your product_id
+ * @param product_release Your preoduct_release
+ */
+ USBMIDI(uint16_t vendor_id = 0x0700, uint16_t product_id = 0x0101, uint16_t product_release = 0x0001);
+
+ /**
+ * Send a MIDIMessage
+ *
+ * @param m The MIDIMessage to send
+ */
+ void write(MIDIMessage m);
+
+ /**
+ * Attach a callback for when a MIDIEvent is received
+ *
+ * @param fptr function pointer
+ */
+ void attach(void (*fptr)(MIDIMessage));
+
+
+protected:
+ virtual bool EP2_OUT_callback();
+ virtual bool USBCallback_setConfiguration(uint8_t configuration);
+ /*
+ * Get string product descriptor
+ *
+ * @returns pointer to the string product descriptor
+ */
+ virtual uint8_t * stringIproductDesc();
+
+ /*
+ * Get string interface descriptor
+ *
+ * @returns pointer to the string interface descriptor
+ */
+ virtual uint8_t * stringIinterfaceDesc();
+
+ /*
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc();
+
+private:
+ void (*midi_evt)(MIDIMessage);
+
+};
+
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBMSD/USBMSD.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBMSD/USBMSD.cpp Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,645 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+#include "USBMSD.h"
+
+#define DISK_OK 0x00
+#define NO_INIT 0x01
+#define NO_DISK 0x02
+#define WRITE_PROTECT 0x04
+
+#define CBW_Signature 0x43425355
+#define CSW_Signature 0x53425355
+
+// SCSI Commands
+#define TEST_UNIT_READY 0x00
+#define REQUEST_SENSE 0x03
+#define FORMAT_UNIT 0x04
+#define INQUIRY 0x12
+#define MODE_SELECT6 0x15
+#define MODE_SENSE6 0x1A
+#define START_STOP_UNIT 0x1B
+#define MEDIA_REMOVAL 0x1E
+#define READ_FORMAT_CAPACITIES 0x23
+#define READ_CAPACITY 0x25
+#define READ10 0x28
+#define WRITE10 0x2A
+#define VERIFY10 0x2F
+#define READ12 0xA8
+#define WRITE12 0xAA
+#define MODE_SELECT10 0x55
+#define MODE_SENSE10 0x5A
+
+// MSC class specific requests
+#define MSC_REQUEST_RESET 0xFF
+#define MSC_REQUEST_GET_MAX_LUN 0xFE
+
+#define DEFAULT_CONFIGURATION (1)
+
+// max packet size
+#define MAX_PACKET MAX_PACKET_SIZE_EPBULK
+
+// CSW Status
+enum Status {
+ CSW_PASSED,
+ CSW_FAILED,
+ CSW_ERROR,
+};
+
+
+USBMSD::USBMSD(uint16_t vendor_id, uint16_t product_id, uint16_t product_release): USBDevice(vendor_id, product_id, product_release) {
+ stage = READ_CBW;
+ memset((void *)&cbw, 0, sizeof(CBW));
+ memset((void *)&csw, 0, sizeof(CSW));
+}
+
+
+
+// Called in ISR context to process a class specific request
+bool USBMSD::USBCallback_request(void) {
+
+ bool success = false;
+ CONTROL_TRANSFER * transfer = getTransferPtr();
+ static uint8_t maxLUN[1] = {0};
+
+ if (transfer->setup.bmRequestType.Type == CLASS_TYPE) {
+ switch (transfer->setup.bRequest) {
+ case MSC_REQUEST_RESET:
+ reset();
+ success = true;
+ break;
+ case MSC_REQUEST_GET_MAX_LUN:
+ transfer->remaining = 1;
+ transfer->ptr = maxLUN;
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ default:
+ break;
+ }
+ }
+
+ return success;
+}
+
+
+bool USBMSD::connect() {
+
+ //disk initialization
+ if (disk_status() & NO_INIT) {
+ if (disk_initialize()) {
+ return false;
+ }
+ }
+
+ // get number of blocks
+ BlockCount = disk_sectors();
+
+ // get memory size
+ MemorySize = disk_size();
+
+ if (BlockCount > 0) {
+ BlockSize = MemorySize / BlockCount;
+ if (BlockSize != 0) {
+ page = (uint8_t *)malloc(BlockSize * sizeof(uint8_t));
+ if (page == NULL)
+ return false;
+ }
+ } else {
+ return false;
+ }
+
+ //connect the device
+ USBDevice::connect();
+ return true;
+}
+
+
+void USBMSD::reset() {
+ stage = READ_CBW;
+}
+
+
+// Called in ISR context called when a data is received
+bool USBMSD::EP2_OUT_callback() {
+ uint32_t size = 0;
+ uint8_t buf[MAX_PACKET_SIZE_EPBULK];
+ readEP(EPBULK_OUT, buf, &size, MAX_PACKET_SIZE_EPBULK);
+ switch (stage) {
+ // the device has to decode the CBW received
+ case READ_CBW:
+ CBWDecode(buf, size);
+ break;
+
+ // the device has to receive data from the host
+ case PROCESS_CBW:
+ switch (cbw.CB[0]) {
+ case WRITE10:
+ case WRITE12:
+ memoryWrite(buf, size);
+ break;
+ case VERIFY10:
+ memoryVerify(buf, size);
+ break;
+ }
+ break;
+
+ // an error has occured: stall endpoint and send CSW
+ default:
+ stallEndpoint(EPBULK_OUT);
+ csw.Status = CSW_ERROR;
+ sendCSW();
+ break;
+ }
+
+ //reactivate readings on the OUT bulk endpoint
+ readStart(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+ return true;
+}
+
+// Called in ISR context when a data has been transferred
+bool USBMSD::EP2_IN_callback() {
+ switch (stage) {
+
+ // the device has to send data to the host
+ case PROCESS_CBW:
+ switch (cbw.CB[0]) {
+ case READ10:
+ case READ12:
+ memoryRead();
+ break;
+ }
+ break;
+
+ //the device has to send a CSW
+ case SEND_CSW:
+ sendCSW();
+ break;
+
+ // an error has occured
+ case ERROR:
+ stallEndpoint(EPBULK_IN);
+ sendCSW();
+ break;
+
+ // the host has received the CSW -> we wait a CBW
+ case WAIT_CSW:
+ stage = READ_CBW;
+ break;
+ }
+ return true;
+}
+
+
+void USBMSD::memoryWrite (uint8_t * buf, uint16_t size) {
+
+ if ((addr + size) > MemorySize) {
+ size = MemorySize - addr;
+ stage = ERROR;
+ stallEndpoint(EPBULK_OUT);
+ }
+
+ // we fill an array in RAM of 1 block before writing it in memory
+ for (int i = 0; i < size; i++)
+ page[addr%BlockSize + i] = buf[i];
+
+ // if the array is filled, write it in memory
+ if (!((addr + size)%BlockSize)) {
+ if (!(disk_status() & WRITE_PROTECT)) {
+ disk_write(page, addr/BlockSize);
+ }
+ }
+
+ addr += size;
+ length -= size;
+ csw.DataResidue -= size;
+
+ if ((!length) || (stage != PROCESS_CBW)) {
+ csw.Status = (stage == ERROR) ? CSW_FAILED : CSW_PASSED;
+ sendCSW();
+ }
+}
+
+void USBMSD::memoryVerify (uint8_t * buf, uint16_t size) {
+ uint32_t n;
+
+ if ((addr + size) > MemorySize) {
+ size = MemorySize - addr;
+ stage = ERROR;
+ stallEndpoint(EPBULK_OUT);
+ }
+
+ // beginning of a new block -> load a whole block in RAM
+ if (!(addr%BlockSize))
+ disk_read(page, addr/BlockSize);
+
+ // info are in RAM -> no need to re-read memory
+ for (n = 0; n < size; n++) {
+ if (page[addr%BlockSize + n] != buf[n]) {
+ memOK = false;
+ break;
+ }
+ }
+
+ addr += size;
+ length -= size;
+ csw.DataResidue -= size;
+
+ if ( !length || (stage != PROCESS_CBW)) {
+ csw.Status = (memOK && (stage == PROCESS_CBW)) ? CSW_PASSED : CSW_FAILED;
+ sendCSW();
+ }
+}
+
+
+bool USBMSD::inquiryRequest (void) {
+ uint8_t inquiry[] = { 0x00, 0x80, 0x00, 0x01,
+ 36 - 4, 0x80, 0x00, 0x00,
+ 'M', 'B', 'E', 'D', '.', 'O', 'R', 'G',
+ 'M', 'B', 'E', 'D', ' ', 'U', 'S', 'B', ' ', 'D', 'I', 'S', 'K', ' ', ' ', ' ',
+ '1', '.', '0', ' ',
+ };
+ if (!write(inquiry, sizeof(inquiry))) {
+ return false;
+ }
+ return true;
+}
+
+
+bool USBMSD::readFormatCapacity() {
+ uint8_t capacity[] = { 0x00, 0x00, 0x00, 0x08,
+ (BlockCount >> 24) & 0xff,
+ (BlockCount >> 16) & 0xff,
+ (BlockCount >> 8) & 0xff,
+ (BlockCount >> 0) & 0xff,
+
+ 0x02,
+ (BlockSize >> 16) & 0xff,
+ (BlockSize >> 8) & 0xff,
+ (BlockSize >> 0) & 0xff,
+ };
+ if (!write(capacity, sizeof(capacity))) {
+ return false;
+ }
+ return true;
+}
+
+
+bool USBMSD::readCapacity (void) {
+ uint8_t capacity[] = {
+ ((BlockCount - 1) >> 24) & 0xff,
+ ((BlockCount - 1) >> 16) & 0xff,
+ ((BlockCount - 1) >> 8) & 0xff,
+ ((BlockCount - 1) >> 0) & 0xff,
+
+ (BlockSize >> 24) & 0xff,
+ (BlockSize >> 16) & 0xff,
+ (BlockSize >> 8) & 0xff,
+ (BlockSize >> 0) & 0xff,
+ };
+ if (!write(capacity, sizeof(capacity))) {
+ return false;
+ }
+ return true;
+}
+
+bool USBMSD::write (uint8_t * buf, uint16_t size) {
+
+ if (size >= cbw.DataLength) {
+ size = cbw.DataLength;
+ }
+ stage = SEND_CSW;
+
+ if (!writeNB(EPBULK_IN, buf, size, MAX_PACKET_SIZE_EPBULK)) {
+ return false;
+ }
+
+ csw.DataResidue -= size;
+ csw.Status = CSW_PASSED;
+ return true;
+}
+
+
+bool USBMSD::modeSense6 (void) {
+ uint8_t sense6[] = { 0x03, 0x00, 0x00, 0x00 };
+ if (!write(sense6, sizeof(sense6))) {
+ return false;
+ }
+ return true;
+}
+
+void USBMSD::sendCSW() {
+ csw.Signature = CSW_Signature;
+ writeNB(EPBULK_IN, (uint8_t *)&csw, sizeof(CSW), MAX_PACKET_SIZE_EPBULK);
+ stage = WAIT_CSW;
+}
+
+bool USBMSD::requestSense (void) {
+ uint8_t request_sense[] = {
+ 0x70,
+ 0x00,
+ 0x05, // Sense Key: illegal request
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x0A,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x30,
+ 0x01,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ };
+
+ if (!write(request_sense, sizeof(request_sense))) {
+ return false;
+ }
+
+ return true;
+}
+
+void USBMSD::fail() {
+ csw.Status = CSW_FAILED;
+ sendCSW();
+}
+
+
+void USBMSD::CBWDecode(uint8_t * buf, uint16_t size) {
+ if (size == sizeof(cbw)) {
+ memcpy((uint8_t *)&cbw, buf, size);
+ if (cbw.Signature == CBW_Signature) {
+ csw.Tag = cbw.Tag;
+ csw.DataResidue = cbw.DataLength;
+ if ((cbw.CBLength < 1) || (cbw.CBLength > 16) ) {
+ fail();
+ } else {
+ switch (cbw.CB[0]) {
+ case TEST_UNIT_READY:
+ testUnitReady();
+ break;
+ case REQUEST_SENSE:
+ requestSense();
+ break;
+ case INQUIRY:
+ inquiryRequest();
+ break;
+ case MODE_SENSE6:
+ modeSense6();
+ break;
+ case READ_FORMAT_CAPACITIES:
+ readFormatCapacity();
+ break;
+ case READ_CAPACITY:
+ readCapacity();
+ break;
+ case READ10:
+ case READ12:
+ if (infoTransfer()) {
+ if ((cbw.Flags & 0x80)) {
+ stage = PROCESS_CBW;
+ memoryRead();
+ } else {
+ stallEndpoint(EPBULK_OUT);
+ csw.Status = CSW_ERROR;
+ sendCSW();
+ }
+ }
+ break;
+ case WRITE10:
+ case WRITE12:
+ if (infoTransfer()) {
+ if (!(cbw.Flags & 0x80)) {
+ stage = PROCESS_CBW;
+ } else {
+ stallEndpoint(EPBULK_IN);
+ csw.Status = CSW_ERROR;
+ sendCSW();
+ }
+ }
+ break;
+ case VERIFY10:
+ if (!(cbw.CB[1] & 0x02)) {
+ csw.Status = CSW_PASSED;
+ sendCSW();
+ break;
+ }
+ if (infoTransfer()) {
+ if (!(cbw.Flags & 0x80)) {
+ stage = PROCESS_CBW;
+ memOK = true;
+ } else {
+ stallEndpoint(EPBULK_IN);
+ csw.Status = CSW_ERROR;
+ sendCSW();
+ }
+ }
+ break;
+ case MEDIA_REMOVAL:
+ csw.Status = CSW_PASSED;
+ sendCSW();
+ break;
+ default:
+ fail();
+ break;
+ }
+ }
+ }
+ }
+}
+
+void USBMSD::testUnitReady (void) {
+
+ if (cbw.DataLength != 0) {
+ if ((cbw.Flags & 0x80) != 0) {
+ stallEndpoint(EPBULK_IN);
+ } else {
+ stallEndpoint(EPBULK_OUT);
+ }
+ }
+
+ csw.Status = CSW_PASSED;
+ sendCSW();
+}
+
+
+void USBMSD::memoryRead (void) {
+ uint32_t n;
+
+ n = (length > MAX_PACKET) ? MAX_PACKET : length;
+
+ if ((addr + n) > MemorySize) {
+ n = MemorySize - addr;
+ stage = ERROR;
+ }
+
+ // we read an entire block
+ if (!(addr%BlockSize))
+ disk_read(page, addr/BlockSize);
+
+ // write data which are in RAM
+ writeNB(EPBULK_IN, &page[addr%BlockSize], n, MAX_PACKET_SIZE_EPBULK);
+
+ addr += n;
+ length -= n;
+
+ csw.DataResidue -= n;
+
+ if ( !length || (stage != PROCESS_CBW)) {
+ csw.Status = (stage == PROCESS_CBW) ? CSW_PASSED : CSW_FAILED;
+ stage = (stage == PROCESS_CBW) ? SEND_CSW : stage;
+ }
+}
+
+
+bool USBMSD::infoTransfer (void) {
+ uint32_t n;
+
+ // Logical Block Address of First Block
+ n = (cbw.CB[2] << 24) | (cbw.CB[3] << 16) | (cbw.CB[4] << 8) | (cbw.CB[5] << 0);
+
+ addr = n * BlockSize;
+
+ // Number of Blocks to transfer
+ switch (cbw.CB[0]) {
+ case READ10:
+ case WRITE10:
+ case VERIFY10:
+ n = (cbw.CB[7] << 8) | (cbw.CB[8] << 0);
+ break;
+
+ case READ12:
+ case WRITE12:
+ n = (cbw.CB[6] << 24) | (cbw.CB[7] << 16) | (cbw.CB[8] << 8) | (cbw.CB[9] << 0);
+ break;
+ }
+
+ length = n * BlockSize;
+
+ if (!cbw.DataLength) { // host requests no data
+ csw.Status = CSW_FAILED;
+ sendCSW();
+ return false;
+ }
+
+ if (cbw.DataLength != length) {
+ if ((cbw.Flags & 0x80) != 0) {
+ stallEndpoint(EPBULK_IN);
+ } else {
+ stallEndpoint(EPBULK_OUT);
+ }
+
+ csw.Status = CSW_FAILED;
+ sendCSW();
+ return false;
+ }
+
+ return true;
+}
+
+
+
+
+
+// Called in ISR context
+// Set configuration. Return false if the
+// configuration is not supported.
+bool USBMSD::USBCallback_setConfiguration(uint8_t configuration) {
+ if (configuration != DEFAULT_CONFIGURATION) {
+ return false;
+ }
+
+ // Configure endpoints > 0
+ addEndpoint(EPBULK_IN, MAX_PACKET_SIZE_EPBULK);
+ addEndpoint(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+
+ //activate readings
+ readStart(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+ return true;
+}
+
+
+uint8_t * USBMSD::stringIinterfaceDesc() {
+ static uint8_t stringIinterfaceDescriptor[] = {
+ 0x08, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'M',0,'S',0,'D',0 //bString iInterface - MSD
+ };
+ return stringIinterfaceDescriptor;
+}
+
+uint8_t * USBMSD::stringIproductDesc() {
+ static uint8_t stringIproductDescriptor[] = {
+ 0x12, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'M',0,'b',0,'e',0,'d',0,' ',0,'M',0,'S',0,'D',0 //bString iProduct - Mbed Audio
+ };
+ return stringIproductDescriptor;
+}
+
+
+uint8_t * USBMSD::configurationDesc() {
+ static uint8_t configDescriptor[] = {
+
+ // Configuration 1
+ 9, // bLength
+ 2, // bDescriptorType
+ LSB(9 + 9 + 7 + 7), // wTotalLength
+ MSB(9 + 9 + 7 + 7),
+ 0x01, // bNumInterfaces
+ 0x01, // bConfigurationValue: 0x01 is used to select this configuration
+ 0x00, // iConfiguration: no string to describe this configuration
+ 0xC0, // bmAttributes
+ 100, // bMaxPower, device power consumption is 100 mA
+
+ // Interface 0, Alternate Setting 0, MSC Class
+ 9, // bLength
+ 4, // bDescriptorType
+ 0x00, // bInterfaceNumber
+ 0x00, // bAlternateSetting
+ 0x02, // bNumEndpoints
+ 0x08, // bInterfaceClass
+ 0x06, // bInterfaceSubClass
+ 0x50, // bInterfaceProtocol
+ 0x04, // iInterface
+
+ // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+ 7, // bLength
+ 5, // bDescriptorType
+ PHY_TO_DESC(EPBULK_IN), // bEndpointAddress
+ 0x02, // bmAttributes (0x02=bulk)
+ LSB(MAX_PACKET_SIZE_EPBULK),// wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPBULK),// wMaxPacketSize (MSB)
+ 0, // bInterval
+
+ // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+ 7, // bLength
+ 5, // bDescriptorType
+ PHY_TO_DESC(EPBULK_OUT), // bEndpointAddress
+ 0x02, // bmAttributes (0x02=bulk)
+ LSB(MAX_PACKET_SIZE_EPBULK),// wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPBULK),// wMaxPacketSize (MSB)
+ 0 // bInterval
+ };
+ return configDescriptor;
+}
diff -r 000000000000 -r ecc3925d3f8c USBMSD/USBMSD.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBMSD/USBMSD.h Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,239 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+
+#ifndef USBMSD_H
+#define USBMSD_H
+
+/* These headers are included for child class. */
+#include "USBEndpoints.h"
+#include "USBDescriptor.h"
+#include "USBDevice_Types.h"
+
+#include "USBDevice.h"
+
+/**
+ * USBMSD class: generic class in order to use all kinds of blocks storage chip
+ *
+ * Introduction
+ *
+ * The USBMSD implements the MSD protocol. It permits to access a memory chip (flash, sdcard,...)
+ * from a computer over USB. But this class doesn't work standalone, you need to subclass this class
+ * and define virtual functions which are called in USBMSD.
+ *
+ * How to use this class with your chip ?
+ *
+ * You have to inherit and define some pure virtual functions (mandatory step):
+ * - virtual int disk_read(char * data, int block): function to read a block
+ * - virtual int disk_write(const char * data, int block): function to write a block
+ * - virtual int disk_initialize(): function to initialize the memory
+ * - virtual int disk_sectors(): return the number of blocks
+ * - virtual int disk_size(): return the memory size
+ * - virtual int disk_status(): return the status of the storage chip (0: OK, 1: not initialized, 2: no medium in the drive, 4: write protection)
+ *
+ * All functions names are compatible with the fat filesystem library. So you can imagine using your own class with
+ * USBMSD and the fat filesystem library in the same program. Just be careful because there are two different parts which
+ * will access the sd card. You can do a master/slave system using the disk_status method.
+ *
+ * Once these functions defined, you can call connect() (at the end of the constructor of your class for instance)
+ * of USBMSD to connect your mass storage device. connect() will first call disk_status() to test the status of the disk.
+ * If disk_status() returns 1 (disk not initialized), then disk_initialize() is called. After this step, connect() will collect information
+ * such as the number of blocks and the memory size.
+ */
+class USBMSD: public USBDevice {
+public:
+
+ /**
+ * Constructor
+ *
+ * @param vendor_id Your vendor_id
+ * @param product_id Your product_id
+ * @param product_release Your preoduct_release
+ */
+ USBMSD(uint16_t vendor_id = 0x0703, uint16_t product_id = 0x0104, uint16_t product_release = 0x0001);
+
+ /**
+ * Connect the USB MSD device. Establish disk initialization before really connect the device.
+ *
+ * @returns true if successful
+ */
+ bool connect();
+
+
+protected:
+
+ /*
+ * read a block on a storage chip
+ *
+ * @param data pointer where will be stored read data
+ * @param block block number
+ * @returns 0 if successful
+ */
+ virtual int disk_read(uint8_t * data, uint64_t block) = 0;
+
+ /*
+ * write a block on a storage chip
+ *
+ * @param data data to write
+ * @param block block number
+ * @returns 0 if successful
+ */
+ virtual int disk_write(const uint8_t * data, uint64_t block) = 0;
+
+ /*
+ * Disk initilization
+ */
+ virtual int disk_initialize() = 0;
+
+ /*
+ * Return the number of blocks
+ *
+ * @returns number of blocks
+ */
+ virtual uint64_t disk_sectors() = 0;
+
+ /*
+ * Return memory size
+ *
+ * @returns memory size
+ */
+ virtual uint64_t disk_size() = 0;
+
+
+ /*
+ * To check the status of the storage chip
+ *
+ * @returns status: 0: OK, 1: disk not initialized, 2: no medium in the drive, 4: write protected
+ */
+ virtual int disk_status() = 0;
+
+ /*
+ * Get string product descriptor
+ *
+ * @returns pointer to the string product descriptor
+ */
+ virtual uint8_t * stringIproductDesc();
+
+ /*
+ * Get string interface descriptor
+ *
+ * @returns pointer to the string interface descriptor
+ */
+ virtual uint8_t * stringIinterfaceDesc();
+
+ /*
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc();
+
+ /*
+ * Callback called when a packet is received
+ */
+ virtual bool EP2_OUT_callback();
+
+ /*
+ * Callback called when a packet has been sent
+ */
+ virtual bool EP2_IN_callback();
+
+ /*
+ * Set configuration of device. Add endpoints
+ */
+ virtual bool USBCallback_setConfiguration(uint8_t configuration);
+
+ /*
+ * Callback called to process class specific requests
+ */
+ virtual bool USBCallback_request();
+
+
+private:
+
+ // MSC Bulk-only Stage
+ enum Stage {
+ READ_CBW, // wait a CBW
+ ERROR, // error
+ PROCESS_CBW, // process a CBW request
+ SEND_CSW, // send a CSW
+ WAIT_CSW, // wait that a CSW has been effectively sent
+ };
+
+ // Bulk-only CBW
+ typedef __packed struct {
+ uint32_t Signature;
+ uint32_t Tag;
+ uint32_t DataLength;
+ uint8_t Flags;
+ uint8_t LUN;
+ uint8_t CBLength;
+ uint8_t CB[16];
+ } CBW;
+
+ // Bulk-only CSW
+ typedef __packed struct {
+ uint32_t Signature;
+ uint32_t Tag;
+ uint32_t DataResidue;
+ uint8_t Status;
+ } CSW;
+
+ //state of the bulk-only state machine
+ Stage stage;
+
+ // current CBW
+ CBW cbw;
+
+ // CSW which will be sent
+ CSW csw;
+
+ // addr where will be read or written data
+ uint32_t addr;
+
+ // length of a reading or writing
+ uint32_t length;
+
+ // memory OK (after a memoryVerify)
+ bool memOK;
+
+ // cache in RAM before writing in memory. Useful also to read a block.
+ uint8_t * page;
+
+ int BlockSize;
+ uint64_t MemorySize;
+ uint64_t BlockCount;
+
+ void CBWDecode(uint8_t * buf, uint16_t size);
+ void sendCSW (void);
+ bool inquiryRequest (void);
+ bool write (uint8_t * buf, uint16_t size);
+ bool readFormatCapacity();
+ bool readCapacity (void);
+ bool infoTransfer (void);
+ void memoryRead (void);
+ bool modeSense6 (void);
+ void testUnitReady (void);
+ bool requestSense (void);
+ void memoryVerify (uint8_t * buf, uint16_t size);
+ void memoryWrite (uint8_t * buf, uint16_t size);
+ void reset();
+ void fail();
+};
+
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBSerial/CircBuffer.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBSerial/CircBuffer.h Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,69 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef CIRCBUFFER_H
+#define CIRCBUFFER_H
+
+template <class T>
+class CircBuffer {
+public:
+ CircBuffer(int length) {
+ write = 0;
+ read = 0;
+ size = length + 1;
+ buf = (T *)malloc(size * sizeof(T));
+ };
+
+ bool isFull() {
+ return ((write + 1) % size == read);
+ };
+
+ bool isEmpty() {
+ return (read == write);
+ };
+
+ void queue(T k) {
+ if (isFull()) {
+ read++;
+ read %= size;
+ }
+ buf[write++] = k;
+ write %= size;
+ }
+
+ uint16_t available() {
+ return (write >= read) ? write - read : size - read + write;
+ };
+
+ bool dequeue(T * c) {
+ bool empty = isEmpty();
+ if (!empty) {
+ *c = buf[read++];
+ read %= size;
+ }
+ return(!empty);
+ };
+
+private:
+ volatile uint16_t write;
+ volatile uint16_t read;
+ uint16_t size;
+ T * buf;
+};
+
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBSerial/USBCDC.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBSerial/USBCDC.cpp Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,253 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+#include "USBCDC.h"
+
+static uint8_t cdc_line_coding[7]= {0x80, 0x25, 0x00, 0x00, 0x00, 0x00, 0x08};
+
+#define DEFAULT_CONFIGURATION (1)
+
+#define CDC_SET_LINE_CODING 0x20
+#define CDC_GET_LINE_CODING 0x21
+#define CDC_SET_CONTROL_LINE_STATE 0x22
+
+#define MAX_CDC_REPORT_SIZE MAX_PACKET_SIZE_EPBULK
+
+USBCDC::USBCDC(uint16_t vendor_id, uint16_t product_id, uint16_t product_release): USBDevice(vendor_id, product_id, product_release) {
+ terminal_connected = false;
+ USBDevice::connect();
+}
+
+bool USBCDC::USBCallback_request(void) {
+ /* Called in ISR context */
+
+ bool success = false;
+ CONTROL_TRANSFER * transfer = getTransferPtr();
+
+ /* Process class-specific requests */
+
+ if (transfer->setup.bmRequestType.Type == CLASS_TYPE) {
+ switch (transfer->setup.bRequest) {
+ case CDC_GET_LINE_CODING:
+ transfer->remaining = 7;
+ transfer->ptr = cdc_line_coding;
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case CDC_SET_LINE_CODING:
+ transfer->remaining = 7;
+ success = true;
+ terminal_connected = true;
+ break;
+ case CDC_SET_CONTROL_LINE_STATE:
+ terminal_connected = false;
+ success = true;
+ break;
+ default:
+ break;
+ }
+ }
+
+ return success;
+}
+
+
+// Called in ISR context
+// Set configuration. Return false if the
+// configuration is not supported.
+bool USBCDC::USBCallback_setConfiguration(uint8_t configuration) {
+ if (configuration != DEFAULT_CONFIGURATION) {
+ return false;
+ }
+
+ // Configure endpoints > 0
+ addEndpoint(EPINT_IN, MAX_PACKET_SIZE_EPINT);
+ addEndpoint(EPBULK_IN, MAX_PACKET_SIZE_EPBULK);
+ addEndpoint(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+
+ // We activate the endpoint to be able to recceive data
+ readStart(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+ return true;
+}
+
+bool USBCDC::send(uint8_t * buffer, uint32_t size) {
+ return USBDevice::write(EPBULK_IN, buffer, size, MAX_CDC_REPORT_SIZE);
+}
+
+bool USBCDC::readEP(uint8_t * buffer, uint32_t * size) {
+ if (!USBDevice::readEP(EPBULK_OUT, buffer, size, MAX_CDC_REPORT_SIZE))
+ return false;
+ if (!readStart(EPBULK_OUT, MAX_CDC_REPORT_SIZE))
+ return false;
+ return true;
+}
+
+bool USBCDC::readEP_NB(uint8_t * buffer, uint32_t * size) {
+ if (!USBDevice::readEP_NB(EPBULK_OUT, buffer, size, MAX_CDC_REPORT_SIZE))
+ return false;
+ if (!readStart(EPBULK_OUT, MAX_CDC_REPORT_SIZE))
+ return false;
+ return true;
+}
+
+
+uint8_t * USBCDC::deviceDesc() {
+ static uint8_t deviceDescriptor[] = {
+ 18, // bLength
+ 1, // bDescriptorType
+ 0x10, 0x01, // bcdUSB
+ 2, // bDeviceClass
+ 0, // bDeviceSubClass
+ 0, // bDeviceProtocol
+ MAX_PACKET_SIZE_EP0, // bMaxPacketSize0
+ LSB(VENDOR_ID), MSB(VENDOR_ID), // idVendor
+ LSB(PRODUCT_ID), MSB(PRODUCT_ID),// idProduct
+ 0x00, 0x01, // bcdDevice
+ 1, // iManufacturer
+ 2, // iProduct
+ 3, // iSerialNumber
+ 1 // bNumConfigurations
+ };
+ return deviceDescriptor;
+}
+
+uint8_t * USBCDC::stringIinterfaceDesc() {
+ static uint8_t stringIinterfaceDescriptor[] = {
+ 0x08,
+ STRING_DESCRIPTOR,
+ 'C',0,'D',0,'C',0,
+ };
+ return stringIinterfaceDescriptor;
+}
+
+uint8_t * USBCDC::stringIproductDesc() {
+ static uint8_t stringIproductDescriptor[] = {
+ 0x16,
+ STRING_DESCRIPTOR,
+ 'C',0,'D',0,'C',0,' ',0,'D',0,'E',0,'V',0,'I',0,'C',0,'E',0
+ };
+ return stringIproductDescriptor;
+}
+
+
+#define CONFIG1_DESC_SIZE (9+8+9+5+5+4+5+7+9+7+7)
+
+uint8_t * USBCDC::configurationDesc() {
+ static uint8_t configDescriptor[] = {
+ // configuration descriptor
+ 9, // bLength
+ 2, // bDescriptorType
+ LSB(CONFIG1_DESC_SIZE), // wTotalLength
+ MSB(CONFIG1_DESC_SIZE),
+ 2, // bNumInterfaces
+ 1, // bConfigurationValue
+ 0, // iConfiguration
+ 0x80, // bmAttributes
+ 50, // bMaxPower
+
+ // IAD to associate the two CDC interfaces
+ 0x08, // bLength
+ 0x0b, // bDescriptorType
+ 0x00, // bFirstInterface
+ 0x02, // bInterfaceCount
+ 0x02, // bFunctionClass
+ 0x02, // bFunctionSubClass
+ 0, // bFunctionProtocol
+ 0, // iFunction
+
+ // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
+ 9, // bLength
+ 4, // bDescriptorType
+ 0, // bInterfaceNumber
+ 0, // bAlternateSetting
+ 1, // bNumEndpoints
+ 0x02, // bInterfaceClass
+ 0x02, // bInterfaceSubClass
+ 0x01, // bInterfaceProtocol
+ 0, // iInterface
+
+ // CDC Header Functional Descriptor, CDC Spec 5.2.3.1, Table 26
+ 5, // bFunctionLength
+ 0x24, // bDescriptorType
+ 0x00, // bDescriptorSubtype
+ 0x10, 0x01, // bcdCDC
+
+ // Call Management Functional Descriptor, CDC Spec 5.2.3.2, Table 27
+ 5, // bFunctionLength
+ 0x24, // bDescriptorType
+ 0x01, // bDescriptorSubtype
+ 0x03, // bmCapabilities
+ 1, // bDataInterface
+
+ // Abstract Control Management Functional Descriptor, CDC Spec 5.2.3.3, Table 28
+ 4, // bFunctionLength
+ 0x24, // bDescriptorType
+ 0x02, // bDescriptorSubtype
+ 0x06, // bmCapabilities
+
+ // Union Functional Descriptor, CDC Spec 5.2.3.8, Table 33
+ 5, // bFunctionLength
+ 0x24, // bDescriptorType
+ 0x06, // bDescriptorSubtype
+ 0, // bMasterInterface
+ 1, // bSlaveInterface0
+
+ // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPINT_IN), // bEndpointAddress
+ E_INTERRUPT, // bmAttributes (0x03=intr)
+ LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB)
+ 16, // bInterval
+
+
+
+
+ // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
+ 9, // bLength
+ 4, // bDescriptorType
+ 1, // bInterfaceNumber
+ 0, // bAlternateSetting
+ 2, // bNumEndpoints
+ 0x0A, // bInterfaceClass
+ 0x00, // bInterfaceSubClass
+ 0x00, // bInterfaceProtocol
+ 0, // iInterface
+
+ // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPBULK_IN), // bEndpointAddress
+ E_BULK, // bmAttributes (0x02=bulk)
+ LSB(MAX_PACKET_SIZE_EPBULK),// wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPBULK),// wMaxPacketSize (MSB)
+ 0, // bInterval
+
+ // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPBULK_OUT), // bEndpointAddress
+ E_BULK, // bmAttributes (0x02=bulk)
+ LSB(MAX_PACKET_SIZE_EPBULK),// wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPBULK),// wMaxPacketSize (MSB)
+ 0 // bInterval
+ };
+ return configDescriptor;
+}
diff -r 000000000000 -r ecc3925d3f8c USBSerial/USBCDC.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBSerial/USBCDC.h Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,110 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBCDC_H
+#define USBCDC_H
+
+/* These headers are included for child class. */
+#include "USBEndpoints.h"
+#include "USBDescriptor.h"
+#include "USBDevice_Types.h"
+
+#include "USBDevice.h"
+
+class USBCDC: public USBDevice {
+public:
+
+ /*
+ * Constructor
+ *
+ * @param vendor_id Your vendor_id
+ * @param product_id Your product_id
+ * @param product_release Your preoduct_release
+ */
+ USBCDC(uint16_t vendor_id, uint16_t product_id, uint16_t product_release);
+
+protected:
+
+ /*
+ * Get device descriptor. Warning: this method has to store the length of the report descriptor in reportLength.
+ *
+ * @returns pointer to the device descriptor
+ */
+ virtual uint8_t * deviceDesc();
+
+ /*
+ * Get string product descriptor
+ *
+ * @returns pointer to the string product descriptor
+ */
+ virtual uint8_t * stringIproductDesc();
+
+ /*
+ * Get string interface descriptor
+ *
+ * @returns pointer to the string interface descriptor
+ */
+ virtual uint8_t * stringIinterfaceDesc();
+
+ /*
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc();
+
+ /*
+ * Send a buffer
+ *
+ * @param endpoint endpoint which will be sent the buffer
+ * @param buffer buffer to be sent
+ * @param size length of the buffer
+ * @returns true if successful
+ */
+ bool send(uint8_t * buffer, uint32_t size);
+
+ /*
+ * Read a buffer from a certain endpoint. Warning: blocking
+ *
+ * @param endpoint endpoint to read
+ * @param buffer buffer where will be stored bytes
+ * @param size the number of bytes read will be stored in *size
+ * @param maxSize the maximum length that can be read
+ * @returns true if successful
+ */
+ bool readEP(uint8_t * buffer, uint32_t * size);
+
+ /*
+ * Read a buffer from a certain endpoint. Warning: non blocking
+ *
+ * @param endpoint endpoint to read
+ * @param buffer buffer where will be stored bytes
+ * @param size the number of bytes read will be stored in *size
+ * @param maxSize the maximum length that can be read
+ * @returns true if successful
+ */
+ bool readEP_NB(uint8_t * buffer, uint32_t * size);
+
+protected:
+ virtual bool USBCallback_request();
+ virtual bool USBCallback_setConfiguration(uint8_t configuration);
+ volatile bool terminal_connected;
+
+};
+
+#endif
diff -r 000000000000 -r ecc3925d3f8c USBSerial/USBSerial.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBSerial/USBSerial.cpp Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,69 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "stdint.h"
+#include "USBSerial.h"
+
+int USBSerial::_putc(int c) {
+ if (!terminal_connected)
+ return 0;
+ send((uint8_t *)&c, 1);
+ return 1;
+}
+
+int USBSerial::_getc() {
+ uint8_t c;
+ while (buf.isEmpty());
+ buf.dequeue(&c);
+ return c;
+}
+
+
+bool USBSerial::writeBlock(uint8_t * buf, uint16_t size) {
+ if(size > MAX_PACKET_SIZE_EPBULK) {
+ return false;
+ }
+ if(!send(buf, size)) {
+ return false;
+ }
+ return true;
+}
+
+
+
+bool USBSerial::EP2_OUT_callback() {
+ uint8_t c[65];
+ uint32_t size = 0;
+
+ //we read the packet received and put it on the circular buffer
+ readEP(c, &size);
+ for (int i = 0; i < size; i++) {
+ buf.queue(c[i]);
+ }
+
+ //call a potential handler
+ rx.call();
+
+ // We reactivate the endpoint to receive next characters
+ readStart(EPBULK_OUT, MAX_PACKET_SIZE_EPBULK);
+ return true;
+}
+
+uint8_t USBSerial::available() {
+ return buf.available();
+}
diff -r 000000000000 -r ecc3925d3f8c USBSerial/USBSerial.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBSerial/USBSerial.h Tue May 24 13:16:55 2016 +0000
@@ -0,0 +1,128 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef USBSERIAL_H
+#define USBSERIAL_H
+
+#include "USBCDC.h"
+#include "Stream.h"
+#include "CircBuffer.h"
+
+
+/**
+* USBSerial example
+*
+* @code
+* #include "mbed.h"
+* #include "USBSerial.h"
+*
+* //Virtual serial port over USB
+* USBSerial serial;
+*
+* int main(void) {
+*
+* while(1)
+* {
+* serial.printf("I am a virtual serial port\n");
+* wait(1);
+* }
+* }
+* @endcode
+*/
+class USBSerial: public USBCDC, public Stream {
+public:
+
+ /**
+ * Constructor
+ *
+ * @param vendor_id Your vendor_id (default: 0x1f00)
+ * @param product_id Your product_id (default: 0x2012)
+ * @param product_release Your preoduct_release (default: 0x0001)
+ *
+ */
+ USBSerial(uint16_t vendor_id = 0x1f00, uint16_t product_id = 0x2012, uint16_t product_release = 0x0001): USBCDC(vendor_id, product_id, product_release), buf(128){ };
+
+
+ /**
+ * Send a character. You can use puts, printf.
+ *
+ * @param c character to be sent
+ * @returns true if there is no error, false otherwise
+ */
+ virtual int _putc(int c);
+
+ /**
+ * Read a character: blocking
+ *
+ * @returns character read
+ */
+ virtual int _getc();
+
+ /**
+ * Check the number of bytes available.
+ *
+ * @returns the number of bytes available
+ */
+ uint8_t available();
+
+ /**
+ * Write a block of data.
+ *
+ * For more efficiency, a block of size 64 (maximum size of a bulk endpoint) has to be written.
+ *
+ * @param buf pointer on data which will be written
+ * @param size size of the buffer. The maximum size of a block is limited by the size of the endpoint (64 bytes)
+ *
+ * @returns true if successfull
+ */
+ bool writeBlock(uint8_t * buf, uint16_t size);
+
+ /**
+ * Attach a member function to call when a packet is received.
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ */
+ template<typename T>
+ void attach(T* tptr, void (T::*mptr)(void)) {
+ if((mptr != NULL) && (tptr != NULL)) {
+ rx.attach(tptr, mptr);
+ }
+ }
+
+ /**
+ * Attach a callback called when a packet is received
+ *
+ * @param fptr function pointer
+ */
+ void attach(void (*fn)(void)) {
+ if(fn != NULL) {
+ rx.attach(fn);
+ }
+ }
+
+
+protected:
+ virtual bool EP2_OUT_callback();
+
+private:
+ FunctionPointer rx;
+ CircBuffer<uint8_t> buf;
+};
+
+#endif