Nirvana Jay
patch for F746 demo
Fork of
BSP_DISCO_F746NG
by 
ST
Diff: Components/stmpe811/stmpe811.h
- Revision:
- 1:e8fac4061a5b
diff -r c9112f0c67e3 -r e8fac4061a5b Components/stmpe811/stmpe811.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/stmpe811/stmpe811.h Mon Nov 02 23:35:17 2015 +0000
@@ -0,0 +1,291 @@
+/**
+ ******************************************************************************
+ * @file stmpe811.h
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 15-December-2014
+ * @brief This file contains all the functions prototypes for the
+ * stmpe811.c IO expander driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STMPE811_H
+#define __STMPE811_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "../Common/ts.h"
+#include "../Common/io.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup Components
+ * @{
+ */
+
+/** @defgroup STMPE811
+ * @{
+ */
+
+/** @defgroup STMPE811_Exported_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STMPE811_Exported_Constants
+ * @{
+ */
+
+/* Chip IDs */
+#define STMPE811_ID 0x0811
+
+/* Identification registers & System Control */
+#define STMPE811_REG_CHP_ID_LSB 0x00
+#define STMPE811_REG_CHP_ID_MSB 0x01
+#define STMPE811_REG_ID_VER 0x02
+
+/* Global interrupt Enable bit */
+#define STMPE811_GIT_EN 0x01
+
+/* IO expander functionalities */
+#define STMPE811_ADC_FCT 0x01
+#define STMPE811_TS_FCT 0x02
+#define STMPE811_IO_FCT 0x04
+#define STMPE811_TEMPSENS_FCT 0x08
+
+/* Global Interrupts definitions */
+#define STMPE811_GIT_IO 0x80 /* IO interrupt */
+#define STMPE811_GIT_ADC 0x40 /* ADC interrupt */
+#define STMPE811_GIT_TEMP 0x20 /* Not implemented */
+#define STMPE811_GIT_FE 0x10 /* FIFO empty interrupt */
+#define STMPE811_GIT_FF 0x08 /* FIFO full interrupt */
+#define STMPE811_GIT_FOV 0x04 /* FIFO overflowed interrupt */
+#define STMPE811_GIT_FTH 0x02 /* FIFO above threshold interrupt */
+#define STMPE811_GIT_TOUCH 0x01 /* Touch is detected interrupt */
+#define STMPE811_ALL_GIT 0x1F /* All global interrupts */
+#define STMPE811_TS_IT (STMPE811_GIT_TOUCH | STMPE811_GIT_FTH | STMPE811_GIT_FOV | STMPE811_GIT_FF | STMPE811_GIT_FE) /* Touch screen interrupts */
+
+/* General Control Registers */
+#define STMPE811_REG_SYS_CTRL1 0x03
+#define STMPE811_REG_SYS_CTRL2 0x04
+#define STMPE811_REG_SPI_CFG 0x08
+
+/* Interrupt system Registers */
+#define STMPE811_REG_INT_CTRL 0x09
+#define STMPE811_REG_INT_EN 0x0A
+#define STMPE811_REG_INT_STA 0x0B
+#define STMPE811_REG_IO_INT_EN 0x0C
+#define STMPE811_REG_IO_INT_STA 0x0D
+
+/* IO Registers */
+#define STMPE811_REG_IO_SET_PIN 0x10
+#define STMPE811_REG_IO_CLR_PIN 0x11
+#define STMPE811_REG_IO_MP_STA 0x12
+#define STMPE811_REG_IO_DIR 0x13
+#define STMPE811_REG_IO_ED 0x14
+#define STMPE811_REG_IO_RE 0x15
+#define STMPE811_REG_IO_FE 0x16
+#define STMPE811_REG_IO_AF 0x17
+
+/* ADC Registers */
+#define STMPE811_REG_ADC_INT_EN 0x0E
+#define STMPE811_REG_ADC_INT_STA 0x0F
+#define STMPE811_REG_ADC_CTRL1 0x20
+#define STMPE811_REG_ADC_CTRL2 0x21
+#define STMPE811_REG_ADC_CAPT 0x22
+#define STMPE811_REG_ADC_DATA_CH0 0x30
+#define STMPE811_REG_ADC_DATA_CH1 0x32
+#define STMPE811_REG_ADC_DATA_CH2 0x34
+#define STMPE811_REG_ADC_DATA_CH3 0x36
+#define STMPE811_REG_ADC_DATA_CH4 0x38
+#define STMPE811_REG_ADC_DATA_CH5 0x3A
+#define STMPE811_REG_ADC_DATA_CH6 0x3B
+#define STMPE811_REG_ADC_DATA_CH7 0x3C
+
+/* Touch Screen Registers */
+#define STMPE811_REG_TSC_CTRL 0x40
+#define STMPE811_REG_TSC_CFG 0x41
+#define STMPE811_REG_WDM_TR_X 0x42
+#define STMPE811_REG_WDM_TR_Y 0x44
+#define STMPE811_REG_WDM_BL_X 0x46
+#define STMPE811_REG_WDM_BL_Y 0x48
+#define STMPE811_REG_FIFO_TH 0x4A
+#define STMPE811_REG_FIFO_STA 0x4B
+#define STMPE811_REG_FIFO_SIZE 0x4C
+#define STMPE811_REG_TSC_DATA_X 0x4D
+#define STMPE811_REG_TSC_DATA_Y 0x4F
+#define STMPE811_REG_TSC_DATA_Z 0x51
+#define STMPE811_REG_TSC_DATA_XYZ 0x52
+#define STMPE811_REG_TSC_FRACT_XYZ 0x56
+#define STMPE811_REG_TSC_DATA_INC 0x57
+#define STMPE811_REG_TSC_DATA_NON_INC 0xD7
+#define STMPE811_REG_TSC_I_DRIVE 0x58
+#define STMPE811_REG_TSC_SHIELD 0x59
+
+/* Touch Screen Pins definition */
+#define STMPE811_TOUCH_YD STMPE811_PIN_7
+#define STMPE811_TOUCH_XD STMPE811_PIN_6
+#define STMPE811_TOUCH_YU STMPE811_PIN_5
+#define STMPE811_TOUCH_XU STMPE811_PIN_4
+#define STMPE811_TOUCH_IO_ALL (uint32_t)(STMPE811_TOUCH_YD | STMPE811_TOUCH_XD | STMPE811_TOUCH_YU | STMPE811_TOUCH_XU)
+
+/* IO Pins definition */
+#define STMPE811_PIN_0 0x01
+#define STMPE811_PIN_1 0x02
+#define STMPE811_PIN_2 0x04
+#define STMPE811_PIN_3 0x08
+#define STMPE811_PIN_4 0x10
+#define STMPE811_PIN_5 0x20
+#define STMPE811_PIN_6 0x40
+#define STMPE811_PIN_7 0x80
+#define STMPE811_PIN_ALL 0xFF
+
+/* IO Pins directions */
+#define STMPE811_DIRECTION_IN 0x00
+#define STMPE811_DIRECTION_OUT 0x01
+
+/* IO IT types */
+#define STMPE811_TYPE_LEVEL 0x00
+#define STMPE811_TYPE_EDGE 0x02
+
+/* IO IT polarity */
+#define STMPE811_POLARITY_LOW 0x00
+#define STMPE811_POLARITY_HIGH 0x04
+
+/* IO Pin IT edge modes */
+#define STMPE811_EDGE_FALLING 0x01
+#define STMPE811_EDGE_RISING 0x02
+
+/* TS registers masks */
+#define STMPE811_TS_CTRL_ENABLE 0x01
+#define STMPE811_TS_CTRL_STATUS 0x80
+/**
+ * @}
+ */
+
+/** @defgroup STMPE811_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STMPE811_Exported_Functions
+ * @{
+ */
+
+/**
+ * @brief STMPE811 Control functions
+ */
+void stmpe811_Init(uint16_t DeviceAddr);
+void stmpe811_Reset(uint16_t DeviceAddr);
+uint16_t stmpe811_ReadID(uint16_t DeviceAddr);
+void stmpe811_EnableGlobalIT(uint16_t DeviceAddr);
+void stmpe811_DisableGlobalIT(uint16_t DeviceAddr);
+void stmpe811_EnableITSource(uint16_t DeviceAddr, uint8_t Source);
+void stmpe811_DisableITSource(uint16_t DeviceAddr, uint8_t Source);
+void stmpe811_SetITPolarity(uint16_t DeviceAddr, uint8_t Polarity);
+void stmpe811_SetITType(uint16_t DeviceAddr, uint8_t Type);
+uint8_t stmpe811_GlobalITStatus(uint16_t DeviceAddr, uint8_t Source);
+uint8_t stmpe811_ReadGITStatus(uint16_t DeviceAddr, uint8_t Source);
+void stmpe811_ClearGlobalIT(uint16_t DeviceAddr, uint8_t Source);
+
+/**
+ * @brief STMPE811 IO functionalities functions
+ */
+void stmpe811_IO_Start(uint16_t DeviceAddr, uint32_t IO_Pin);
+uint8_t stmpe811_IO_Config(uint16_t DeviceAddr, uint32_t IO_Pin, IO_ModeTypedef IO_Mode);
+void stmpe811_IO_InitPin(uint16_t DeviceAddr, uint32_t IO_Pin, uint8_t Direction);
+void stmpe811_IO_EnableAF(uint16_t DeviceAddr, uint32_t IO_Pin);
+void stmpe811_IO_DisableAF(uint16_t DeviceAddr, uint32_t IO_Pin);
+void stmpe811_IO_SetEdgeMode(uint16_t DeviceAddr, uint32_t IO_Pin, uint8_t Edge);
+void stmpe811_IO_WritePin(uint16_t DeviceAddr, uint32_t IO_Pin, uint8_t PinState);
+uint32_t stmpe811_IO_ReadPin(uint16_t DeviceAddr, uint32_t IO_Pin);
+void stmpe811_IO_EnableIT(uint16_t DeviceAddr);
+void stmpe811_IO_DisableIT(uint16_t DeviceAddr);
+void stmpe811_IO_EnablePinIT(uint16_t DeviceAddr, uint32_t IO_Pin);
+void stmpe811_IO_DisablePinIT(uint16_t DeviceAddr, uint32_t IO_Pin);
+uint32_t stmpe811_IO_ITStatus(uint16_t DeviceAddr, uint32_t IO_Pin);
+void stmpe811_IO_ClearIT(uint16_t DeviceAddr, uint32_t IO_Pin);
+
+/**
+ * @brief STMPE811 Touch screen functionalities functions
+ */
+void stmpe811_TS_Start(uint16_t DeviceAddr);
+uint8_t stmpe811_TS_DetectTouch(uint16_t DeviceAddr);
+void stmpe811_TS_GetXY(uint16_t DeviceAddr, uint16_t *X, uint16_t *Y);
+void stmpe811_TS_EnableIT(uint16_t DeviceAddr);
+void stmpe811_TS_DisableIT(uint16_t DeviceAddr);
+uint8_t stmpe811_TS_ITStatus (uint16_t DeviceAddr);
+void stmpe811_TS_ClearIT (uint16_t DeviceAddr);
+
+void IOE_Init(void);
+void IOE_ITConfig (void);
+void IOE_Delay(uint32_t delay);
+void IOE_Write(uint8_t addr, uint8_t reg, uint8_t value);
+uint8_t IOE_Read(uint8_t addr, uint8_t reg);
+uint16_t IOE_ReadMultiple(uint8_t addr, uint8_t reg, uint8_t *buffer, uint16_t length);
+
+/* Touch screen driver structure */
+extern TS_DrvTypeDef stmpe811_ts_drv;
+
+/* IO driver structure */
+extern IO_DrvTypeDef stmpe811_io_drv;
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* __STMPE811_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/