Li Menglu
nochanges
Dependents: BLE_Acceleration_Statejudging
Fork of
nRF51822
by 
Nordic Semiconductor
Diff: nordic/nrf-sdk/app_common/pstorage.h
- Revision:
- 37:c29c330d942c
- Parent:
- 0:eff01767de02
- Child:
- 48:895748db3357
diff -r bd0186ce644a -r c29c330d942c nordic/nrf-sdk/app_common/pstorage.h
--- a/nordic/nrf-sdk/app_common/pstorage.h Thu Jul 03 10:01:02 2014 +0100
+++ b/nordic/nrf-sdk/app_common/pstorage.h Mon Jul 07 13:43:31 2014 +0100
@@ -25,7 +25,6 @@
#ifndef PSTORAGE_H__
#define PSTORAGE_H__
-#include "nordic_global.h"
#include "pstorage_platform.h"
@@ -39,10 +38,11 @@
* registered with the interface to report any error during an persistent storage access
* operation or any general error that may occur in the interface.
*/
- #define PSTORAGE_ERROR_OP_CODE 0x01 /**< General Error Code */
- #define PSTORAGE_STORE_OP_CODE 0x02 /**< Error when Store Operation was requested */
- #define PSTORAGE_LOAD_OP_CODE 0x03 /**< Error when Load Operation was requested */
- #define PSTORAGE_CLEAR_OP_CODE 0x04 /**< Error when Clear Operation was requested */
+#define PSTORAGE_ERROR_OP_CODE 0x01 /**< General Error Code */
+#define PSTORAGE_STORE_OP_CODE 0x02 /**< Error when Store Operation was requested */
+#define PSTORAGE_LOAD_OP_CODE 0x03 /**< Error when Load Operation was requested */
+#define PSTORAGE_CLEAR_OP_CODE 0x04 /**< Error when Clear Operation was requested */
+#define PSTORAGE_UPDATE_OP_CODE 0x05 /**< Update an already touched storage block */
/**@} */
@@ -56,22 +56,21 @@
/**@brief Persistent Storage Error Reporting Callback
*
* @details Persistent Storage Error Reporting Callback that is used by the interface to report
- * success or failure of a flash operation. Therefore, for store operation or clear
- * operations, that take time, application can know when the procedure was complete.
- * For store operation, since no data copy is made, receiving a success or failure
- * notification, indicated by the reason parameter of callback is an indication that
- * the resident memory could now be reused or freed, as the case may be.
- * This callback is not received for load operation.
+ * success or failure of a flash operation. Therefore, for any operations, application
+ * can know when the procedure was complete. For store operation, since no data copy
+ * is made, receiving a success or failure notification, indicated by the reason
+ * parameter of callback is an indication that the resident memory could now be reused
+ * or freed, as the case may be.
*
- * @param handle Identifies module and block for which callback is received.
- * @param op_code Identifies the operation for which the event is notified.
- * @param result Identifies the result of flash access operation.
- * NRF_SUCCESS implies, operation succeeded.
- * @param p_data Identifies the application data pointer. In case of store operation, this points
- * to the resident source of application memory that application can now free or
- * reuse. In case of clear, this is NULL as no application pointer is needed for
- * this operation.
- * @param data_len Length data application had provided for the operation.
+ * @param[in] handle Identifies module and block for which callback is received.
+ * @param[in] op_code Identifies the operation for which the event is notified.
+ * @param[in] result Identifies the result of flash access operation.
+ * NRF_SUCCESS implies, operation succeeded.
+ * @param[in] p_data Identifies the application data pointer. In case of store operation, this
+ * points to the resident source of application memory that application can now
+ * free or reuse. In case of clear, this is NULL as no application pointer is
+ * needed for this operation.
+ * @param[in] data_len Length data application had provided for the operation.
*
*/
typedef void (*pstorage_ntf_cb_t)(pstorage_handle_t * p_handle,
@@ -81,19 +80,16 @@
uint32_t data_len);
-typedef struct ps_module_param
+typedef struct
{
-
- pstorage_ntf_cb_t cb; /**< Callback registered with the module to be notified of any error occurring in persistent memory management */
- pstorage_size_t block_size; /**< Desired block size for persistent memory storage, for example, if a module has a table with 10 entries, each entry is size 64 bytes,
- * it can request 10 blocks with block size 64 bytes. On the other hand, the module can also request one block of size 640 based on
- * how it would like to access or alter memory in persistent memory.
- * First option is preferred when single entries that need to be updated often when having no impact on the other entries.
- * While second option is preferred when entries of table are not changed on individually but have common point of loading and storing
- * data.
- */
- pstorage_size_t block_count; /** Number of blocks requested by the module, minimum values is 1. */
-
+ pstorage_ntf_cb_t cb; /**< Callback registered with the module to be notified of any error occurring in persistent memory management */
+ pstorage_size_t block_size; /**< Desired block size for persistent memory storage, for example, if a module has a table with 10 entries, each entry is size 64 bytes,
+ * it can request 10 blocks with block size 64 bytes. On the other hand, the module can also request one block of size 640 based on
+ * how it would like to access or alter memory in persistent memory.
+ * First option is preferred when single entries that need to be updated often when having no impact on the other entries.
+ * While second option is preferred when entries of table are not changed on individually but have common point of loading and storing
+ * data. */
+ pstorage_size_t block_count; /** Number of blocks requested by the module, minimum values is 1. */
} pstorage_module_param_t;
/**@} */
@@ -112,7 +108,7 @@
*
* @details Initializes module. To be called once before any other APIs of the module are used.
*
- * @retval NRF_SUCCESS on success, otherwise an appropriate error code.
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
*/
uint32_t pstorage_init(void);
@@ -120,10 +116,11 @@
/**@brief Register with persistent storage interface.
*
* @param[in] p_module_param Module registration param.
- * @param[out] p_block_id Block identifier to identify persistent memory blocks in case registration
- * succeeds. Application is expected to use the block ids for subsequent operations on
- * requested persistent memory. Maximum registrations permitted is determined by
- * configuration parameter PSTORAGE_MAX_APPLICATIONS.
+ * @param[out] p_block_id Block identifier to identify persistent memory blocks in case
+ * registration succeeds. Application is expected to use the block ids
+ * for subsequent operations on requested persistent memory. Maximum
+ * registrations permitted is determined by configuration parameter
+ * PSTORAGE_MAX_APPLICATIONS.
* In case more than one memory blocks are requested, the identifier provided here is
* the base identifier for the first block and to identify subsequent block,
* application shall use \@ref pstorage_block_identifier_get with this base identifier
@@ -132,14 +129,14 @@
* \@ref pstorage_block_identifier_get with based id and provide a block number of 5.
* This way application is only expected to remember the base block identifier.
*
- * @retval NRF_SUCCESS on success, otherwise an appropriate error code.
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
* @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
- * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
* @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
- * @retval NRF_ERROR_NO_MEM in case no more registrations can be supported.
+ * @retval NRF_ERROR_NO_MEM in case no more registrations can be supported.
*/
uint32_t pstorage_register(pstorage_module_param_t * p_module_param,
- pstorage_handle_t* p_block_id);
+ pstorage_handle_t * p_block_id);
/**
@@ -156,13 +153,13 @@
* \@ref pstorage_block_identifier_get with based id and provide a block number of 5.
* This way application is only expected to remember the base block identifier.
*
- * @param[in] p_base_id Base block id received at the time of registration.
- * @param[in] block_num Block Number, with first block numbered zero.
+ * @param[in] p_base_id Base block id received at the time of registration.
+ * @param[in] block_num Block Number, with first block numbered zero.
* @param[out] p_block_id Block identifier for the block number requested in case the API succeeds.
*
- * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
* @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
- * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
* @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
*/
uint32_t pstorage_block_identifier_get(pstorage_handle_t * p_base_id,
@@ -182,12 +179,12 @@
* write 20 bytes at offset of 12, then this field should be set to 12.
* Should be word aligned.
*
- * @retval NRF_SUCCESS on success, otherwise an appropriate error code.
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
* @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
- * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
* @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
- * @retval NRF_ERROR_INVALID_ADDR in case data address 'p_src' is not aligned.
- * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
+ * @retval NRF_ERROR_INVALID_ADDR in case data address 'p_src' is not aligned.
+ * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
*
* @warning No copy of the data is made, and hence memory provided for data source to be written
* to flash cannot be freed or reused by the application until this procedure
@@ -199,6 +196,34 @@
pstorage_size_t size,
pstorage_size_t offset);
+/**@brief Routine to update persistently stored data of length 'size' contained in 'p_src' address
+ * in storage module at 'p_dest' address.
+ *
+ * @param[in] p_dest Destination address where data is to be updated.
+ * @param[in] p_src Source address containing data to be stored. API assumes this to be resident
+ * memory and no intermediate copy of data is made by the API.
+ * @param[in] size Size of data to be stored expressed in bytes. Should be word aligned.
+ * @param[in] offset Offset in bytes to be applied when writing to the block.
+ * For example, if within a block of 100 bytes, application wishes to
+ * write 20 bytes at offset of 12, then this field should be set to 12.
+ * Should be word aligned.
+ *
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ * @retval NRF_ERROR_INVALID_ADDR in case data address 'p_src' is not aligned.
+ * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
+ *
+ * @warning No copy of the data is made, and hence memory provided for data source to be written
+ * to flash cannot be freed or reused by the application until this procedure
+ * is complete. End of this procedure is notified to the application using the
+ * notification callback registered by the application.
+ */
+uint32_t pstorage_update(pstorage_handle_t * p_dest,
+ uint8_t * p_src,
+ pstorage_size_t size,
+ pstorage_size_t offset);
/**@brief Routine to load persistently stored data of length 'size' from 'p_src' address
* to 'p_dest' address; Equivalent to Storage Read.
@@ -212,34 +237,36 @@
* load 20 bytes from offset of 12, then this field should be set to 12.
* Should be word aligned.
*
- *
- * @retval NRF_SUCCESS on success, otherwise an appropriate error code.
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
* @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
- * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
* @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
- * @retval NRF_ERROR_INVALID_ADDR in case data address 'p_dst' is not aligned.
+ * @retval NRF_ERROR_INVALID_ADDR in case data address 'p_dst' is not aligned.
+ * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
*/
uint32_t pstorage_load(uint8_t * p_dest,
pstorage_handle_t * p_src,
pstorage_size_t size,
pstorage_size_t offset);
-
/**@brief Routine to clear data in persistent memory.
*
* @param[in] p_base_id Base block identifier in persistent memory that needs to cleared;
* Equivalent to an Erase Operation.
*
* @param[in] size Size of data to be cleared from persistent memory expressed in bytes.
- * This is currently unused. And a clear would mean clearing all blocks,
- * however, this parameter is to provision for clearing of certain blocks
- * of memory only and not all if need be.
+ * This parameter is to provision for clearing of certain blocks
+ * of memory, or all memory blocks in a registered module. If the total size
+ * of the application module is used (blocks * block size) in combination with
+ * the identifier for the first block in the module, all blocks in the
+ * module will be erased.
*
- * @retval NRF_SUCCESS on success, otherwise an appropriate error code.
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
* @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
- * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
* @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
- * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
+ * @retval NRF_ERROR_INVALID_ADDR in case data address 'p_dst' is not aligned.
+ * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
*
* @note Clear operations may take time. This API however, does not block until the clear
* procedure is complete. Application is notified of procedure completion using
@@ -248,14 +275,26 @@
*/
uint32_t pstorage_clear(pstorage_handle_t * p_base_id, pstorage_size_t size);
+/**
+ * @brief API to get status of number of pending operations with the module.
+ *
+ * @param[out] p_count Number of storage operations pending with the module, if 0,
+ * there are no outstanding requests.
+ *
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ */
+uint32_t pstorage_access_status_get(uint32_t * p_count);
+
#ifdef PSTORAGE_RAW_MODE_ENABLE
/**@brief Function for registering with persistent storage interface.
*
* @param[in] p_module_param Module registration param.
- * @param[out] p_block_id Block identifier to identify persistent memory blocks in case
- * registration succeeds. Application is expected to use the block ids for subsequent
- * operations on requested persistent memory.
+ * @param[out] p_block_id Block identifier to identify persistent memory blocks in case
+ * registration succeeds. Application is expected to use the block ids
+ * for subsequent operations on requested persistent memory.
* In case more than one memory blocks are requested, the identifier provided here is
* the base identifier for the first block and to identify subsequent block,
* application shall use \@ref pstorage_block_identifier_get with this base identifier
@@ -264,11 +303,11 @@
* \@ref pstorage_block_identifier_get with based id and provide a block number of 5.
* This way application is only expected to remember the base block identifier.
*
- * @retval NRF_SUCCESS on success, otherwise an appropriate error code.
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
* @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
- * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
* @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
- * @retval NRF_ERROR_NO_MEM in case no more registrations can be supported.
+ * @retval NRF_ERROR_NO_MEM in case no more registrations can be supported.
*/
uint32_t pstorage_raw_register(pstorage_module_param_t * p_module_param,
pstorage_handle_t * p_block_id);
@@ -280,17 +319,17 @@
* @param[in] p_src Source address containing data to be stored. API assumes this to be resident
* memory and no intermediate copy of data is made by the API.
* @param[in] size Size of data to be stored expressed in bytes. Should be word aligned.
- * @param[in] offset Offset in bytes to be applied when writing to the block.
+ * @param[in] offset Offset in bytes to be applied when writing to the block.
* For example, if within a block of 100 bytes, application wishes to
* write 20 bytes at offset of 12, then this field should be set to 12.
* Should be word aligned.
*
- * @retval NRF_SUCCESS on success, otherwise an appropriate error code.
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
* @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
- * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
* @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
- * @retval NRF_ERROR_INVALID_ADDR in case data address 'p_src' is not aligned.
- * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
+ * @retval NRF_ERROR_INVALID_ADDR in case data address 'p_src' is not aligned.
+ * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
*
* @warning No copy of the data is made, and hence memory provided for data source to be written
* to flash cannot be freed or reused by the application until this procedure
@@ -304,19 +343,18 @@
/**@brief Function for clearing data in persistent memory in raw mode.
*
- * @param[in] p_base_id Base block identifier in persistent memory that needs to cleared;
- * Equivalent to an Erase Operation.
+ * @param[in] p_dest Base block identifier in persistent memory that needs to cleared;
+ * Equivalent to an Erase Operation.
+ * @param[in] size Size of data to be cleared from persistent memory expressed in bytes.
+ * This is currently unused. And a clear would mean clearing all blocks,
+ * however, this parameter is to provision for clearing of certain blocks
+ * of memory only and not all if need be.
*
- * @param[in] size Size of data to be cleared from persistent memory expressed in bytes.
- * This is currently unused. And a clear would mean clearing all blocks,
- * however, this parameter is to provision for clearing of certain blocks
- * of memory only and not all if need be.
- *
- * @retval NRF_SUCCESS on success, otherwise an appropriate error code.
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
* @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
- * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
* @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
- * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
+ * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
*
* @note Clear operations may take time. This API however, does not block until the clear
* procedure is complete. Application is notified of procedure completion using