The official mbed C/C SDK provides the software platform and libraries to build your applications.

Fork of mbed by mbed official

TARGET_EFM32LG_STK3600/efm32lg_prs_signals.h

Committer:
Kojto
Date:
2015-04-29
Revision:
98:8ab26030e058

File content as of revision 98:8ab26030e058:

/**************************************************************************//**
 * @file efm32lg_prs_signals.h
 * @brief EFM32LG_PRS_SIGNALS register and bit field definitions
 * @version 3.20.6
 ******************************************************************************
 * @section License
 * <b>(C) Copyright 2014 Silicon Laboratories, Inc. http://www.silabs.com</b>
 ******************************************************************************
 *
 * Permission is granted to anyone to use this software for any purpose,
 * including commercial applications, and to alter it and redistribute it
 * freely, subject to the following restrictions:
 *
 * 1. The origin of this software must not be misrepresented; you must not
 *    claim that you wrote the original software.@n
 * 2. Altered source versions must be plainly marked as such, and must not be
 *    misrepresented as being the original software.@n
 * 3. This notice may not be removed or altered from any source distribution.
 *
 * DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Laboratories, Inc.
 * has no obligation to support this Software. Silicon Laboratories, Inc. is
 * providing the Software "AS IS", with no express or implied warranties of any
 * kind, including, but not limited to, any implied warranties of
 * merchantability or fitness for any particular purpose or warranties against
 * infringement of any proprietary rights of a third party.
 *
 * Silicon Laboratories, Inc. will not be liable for any consequential,
 * incidental, or special damages, or any other relief, or for any claim by
 * any third party, arising from your use of this Software.
 *
 *****************************************************************************/
/**************************************************************************//**
 * @addtogroup EFM32LG_PRS_Signals
 * @{
 * @brief PRS Signal names
 *****************************************************************************/

#define PRS_VCMP_OUT             ((1 << 16) + 0)  /**< PRS Voltage comparator output */
#define PRS_ACMP0_OUT            ((2 << 16) + 0)  /**< PRS Analog comparator output */
#define PRS_ACMP1_OUT            ((3 << 16) + 0)  /**< PRS Analog comparator output */
#define PRS_DAC0_CH0             ((6 << 16) + 0)  /**< PRS DAC ch0 conversion done */
#define PRS_DAC0_CH1             ((6 << 16) + 1)  /**< PRS DAC ch1 conversion done */
#define PRS_ADC0_SINGLE          ((8 << 16) + 0)  /**< PRS ADC single conversion done */
#define PRS_ADC0_SCAN            ((8 << 16) + 1)  /**< PRS ADC scan conversion done */
#define PRS_USART0_IRTX          ((16 << 16) + 0) /**< PRS USART 0 IRDA out */
#define PRS_USART0_TXC           ((16 << 16) + 1) /**< PRS USART 0 TX complete */
#define PRS_USART0_RXDATAV       ((16 << 16) + 2) /**< PRS USART 0 RX Data Valid */
#define PRS_USART1_TXC           ((17 << 16) + 1) /**< PRS USART 1 TX complete */
#define PRS_USART1_RXDATAV       ((17 << 16) + 2) /**< PRS USART 1 RX Data Valid */
#define PRS_USART2_TXC           ((18 << 16) + 1) /**< PRS USART 2 TX complete */
#define PRS_USART2_RXDATAV       ((18 << 16) + 2) /**< PRS USART 2 RX Data Valid */
#define PRS_TIMER0_UF            ((28 << 16) + 0) /**< PRS Timer 0 Underflow */
#define PRS_TIMER0_OF            ((28 << 16) + 1) /**< PRS Timer 0 Overflow */
#define PRS_TIMER0_CC0           ((28 << 16) + 2) /**< PRS Timer 0 Compare/Capture 0 */
#define PRS_TIMER0_CC1           ((28 << 16) + 3) /**< PRS Timer 0 Compare/Capture 1 */
#define PRS_TIMER0_CC2           ((28 << 16) + 4) /**< PRS Timer 0 Compare/Capture 2 */
#define PRS_TIMER1_UF            ((29 << 16) + 0) /**< PRS Timer 1 Underflow */
#define PRS_TIMER1_OF            ((29 << 16) + 1) /**< PRS Timer 1 Overflow */
#define PRS_TIMER1_CC0           ((29 << 16) + 2) /**< PRS Timer 1 Compare/Capture 0 */
#define PRS_TIMER1_CC1           ((29 << 16) + 3) /**< PRS Timer 1 Compare/Capture 1 */
#define PRS_TIMER1_CC2           ((29 << 16) + 4) /**< PRS Timer 1 Compare/Capture 2 */
#define PRS_TIMER2_UF            ((30 << 16) + 0) /**< PRS Timer 2 Underflow */
#define PRS_TIMER2_OF            ((30 << 16) + 1) /**< PRS Timer 2 Overflow */
#define PRS_TIMER2_CC0           ((30 << 16) + 2) /**< PRS Timer 2 Compare/Capture 0 */
#define PRS_TIMER2_CC1           ((30 << 16) + 3) /**< PRS Timer 2 Compare/Capture 1 */
#define PRS_TIMER2_CC2           ((30 << 16) + 4) /**< PRS Timer 2 Compare/Capture 2 */
#define PRS_TIMER3_UF            ((31 << 16) + 0) /**< PRS Timer 3 Underflow */
#define PRS_TIMER3_OF            ((31 << 16) + 1) /**< PRS Timer 3 Overflow */
#define PRS_TIMER3_CC0           ((31 << 16) + 2) /**< PRS Timer 3 Compare/Capture 0 */
#define PRS_TIMER3_CC1           ((31 << 16) + 3) /**< PRS Timer 3 Compare/Capture 1 */
#define PRS_TIMER3_CC2           ((31 << 16) + 4) /**< PRS Timer 3 Compare/Capture 2 */
#define PRS_USB_SOF              ((36 << 16) + 0) /**< PRS USB Start of Frame */
#define PRS_USB_SOFSR            ((36 << 16) + 1) /**< PRS USB Start of Frame Sent/Received */
#define PRS_RTC_OF               ((40 << 16) + 0) /**< PRS RTC Overflow */
#define PRS_RTC_COMP0            ((40 << 16) + 1) /**< PRS RTC Compare 0 */
#define PRS_RTC_COMP1            ((40 << 16) + 2) /**< PRS RTC Compare 1 */
#define PRS_UART0_TXC            ((41 << 16) + 1) /**< PRS USART 0 TX complete */
#define PRS_UART0_RXDATAV        ((41 << 16) + 2) /**< PRS USART 0 RX Data Valid */
#define PRS_UART1_TXC            ((42 << 16) + 1) /**< PRS USART 0 TX complete */
#define PRS_UART1_RXDATAV        ((42 << 16) + 2) /**< PRS USART 0 RX Data Valid */
#define PRS_GPIO_PIN0            ((48 << 16) + 0) /**< PRS GPIO pin 0 */
#define PRS_GPIO_PIN1            ((48 << 16) + 1) /**< PRS GPIO pin 1 */
#define PRS_GPIO_PIN2            ((48 << 16) + 2) /**< PRS GPIO pin 2 */
#define PRS_GPIO_PIN3            ((48 << 16) + 3) /**< PRS GPIO pin 3 */
#define PRS_GPIO_PIN4            ((48 << 16) + 4) /**< PRS GPIO pin 4 */
#define PRS_GPIO_PIN5            ((48 << 16) + 5) /**< PRS GPIO pin 5 */
#define PRS_GPIO_PIN6            ((48 << 16) + 6) /**< PRS GPIO pin 6 */
#define PRS_GPIO_PIN7            ((48 << 16) + 7) /**< PRS GPIO pin 7 */
#define PRS_GPIO_PIN8            ((49 << 16) + 0) /**< PRS GPIO pin 8 */
#define PRS_GPIO_PIN9            ((49 << 16) + 1) /**< PRS GPIO pin 9 */
#define PRS_GPIO_PIN10           ((49 << 16) + 2) /**< PRS GPIO pin 10 */
#define PRS_GPIO_PIN11           ((49 << 16) + 3) /**< PRS GPIO pin 11 */
#define PRS_GPIO_PIN12           ((49 << 16) + 4) /**< PRS GPIO pin 12 */
#define PRS_GPIO_PIN13           ((49 << 16) + 5) /**< PRS GPIO pin 13 */
#define PRS_GPIO_PIN14           ((49 << 16) + 6) /**< PRS GPIO pin 14 */
#define PRS_GPIO_PIN15           ((49 << 16) + 7) /**< PRS GPIO pin 15 */
#define PRS_LETIMER0_CH0         ((52 << 16) + 0) /**< PRS LETIMER CH0 Out */
#define PRS_LETIMER0_CH1         ((52 << 16) + 1) /**< PRS LETIMER CH1 Out */
#define PRS_BURTC_OF             ((55 << 16) + 0) /**< PRS BURTC Overflow */
#define PRS_BURTC_COMP0          ((55 << 16) + 1) /**< PRS BURTC Compare 0 */
#define PRS_LESENSE_SCANRES0     ((57 << 16) + 0) /**< PRS LESENSE SCANRES register, bit 0 */
#define PRS_LESENSE_SCANRES1     ((57 << 16) + 1) /**< PRS LESENSE SCANRES register, bit 1 */
#define PRS_LESENSE_SCANRES2     ((57 << 16) + 2) /**< PRS LESENSE SCANRES register, bit 2 */
#define PRS_LESENSE_SCANRES3     ((57 << 16) + 3) /**< PRS LESENSE SCANRES register, bit 3 */
#define PRS_LESENSE_SCANRES4     ((57 << 16) + 4) /**< PRS LESENSE SCANRES register, bit 4 */
#define PRS_LESENSE_SCANRES5     ((57 << 16) + 5) /**< PRS LESENSE SCANRES register, bit 5 */
#define PRS_LESENSE_SCANRES6     ((57 << 16) + 6) /**< PRS LESENSE SCANRES register, bit 6 */
#define PRS_LESENSE_SCANRES7     ((57 << 16) + 7) /**< PRS LESENSE SCANRES register, bit 7 */
#define PRS_LESENSE_SCANRES8     ((58 << 16) + 0) /**< PRS LESENSE SCANRES register, bit 8 */
#define PRS_LESENSE_SCANRES9     ((58 << 16) + 1) /**< PRS LESENSE SCANRES register, bit 9 */
#define PRS_LESENSE_SCANRES10    ((58 << 16) + 2) /**< PRS LESENSE SCANRES register, bit 10 */
#define PRS_LESENSE_SCANRES11    ((58 << 16) + 3) /**< PRS LESENSE SCANRES register, bit 11 */
#define PRS_LESENSE_SCANRES12    ((58 << 16) + 4) /**< PRS LESENSE SCANRES register, bit 12 */
#define PRS_LESENSE_SCANRES13    ((58 << 16) + 5) /**< PRS LESENSE SCANRES register, bit 13 */
#define PRS_LESENSE_SCANRES14    ((58 << 16) + 6) /**< PRS LESENSE SCANRES register, bit 14 */
#define PRS_LESENSE_SCANRES15    ((58 << 16) + 7) /**< PRS LESENSE SCANRES register, bit 15 */
#define PRS_LESENSE_DEC0         ((59 << 16) + 0) /**< PRS LESENSE Decoder PRS out 0 */
#define PRS_LESENSE_DEC1         ((59 << 16) + 1) /**< PRS LESENSE Decoder PRS out 1 */
#define PRS_LESENSE_DEC2         ((59 << 16) + 2) /**< PRS LESENSE Decoder PRS out 2 */

/** @} End of group EFM32LG_PRS */