The official mbed C/C SDK provides the software platform and libraries to build your applications.
Fork of mbed by
Diff: TARGET_EFM32LG_STK3600/efm32lg_prs_signals.h
- Revision:
- 98:8ab26030e058
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_EFM32LG_STK3600/efm32lg_prs_signals.h Wed Apr 29 10:16:23 2015 +0100 @@ -0,0 +1,123 @@ +/**************************************************************************//** + * @file efm32lg_prs_signals.h + * @brief EFM32LG_PRS_SIGNALS register and bit field definitions + * @version 3.20.6 + ****************************************************************************** + * @section License + * <b>(C) Copyright 2014 Silicon Laboratories, Inc. http://www.silabs.com</b> + ****************************************************************************** + * + * Permission is granted to anyone to use this software for any purpose, + * including commercial applications, and to alter it and redistribute it + * freely, subject to the following restrictions: + * + * 1. The origin of this software must not be misrepresented; you must not + * claim that you wrote the original software.@n + * 2. Altered source versions must be plainly marked as such, and must not be + * misrepresented as being the original software.@n + * 3. This notice may not be removed or altered from any source distribution. + * + * DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Laboratories, Inc. + * has no obligation to support this Software. Silicon Laboratories, Inc. is + * providing the Software "AS IS", with no express or implied warranties of any + * kind, including, but not limited to, any implied warranties of + * merchantability or fitness for any particular purpose or warranties against + * infringement of any proprietary rights of a third party. + * + * Silicon Laboratories, Inc. will not be liable for any consequential, + * incidental, or special damages, or any other relief, or for any claim by + * any third party, arising from your use of this Software. + * + *****************************************************************************/ +/**************************************************************************//** + * @addtogroup EFM32LG_PRS_Signals + * @{ + * @brief PRS Signal names + *****************************************************************************/ + +#define PRS_VCMP_OUT ((1 << 16) + 0) /**< PRS Voltage comparator output */ +#define PRS_ACMP0_OUT ((2 << 16) + 0) /**< PRS Analog comparator output */ +#define PRS_ACMP1_OUT ((3 << 16) + 0) /**< PRS Analog comparator output */ +#define PRS_DAC0_CH0 ((6 << 16) + 0) /**< PRS DAC ch0 conversion done */ +#define PRS_DAC0_CH1 ((6 << 16) + 1) /**< PRS DAC ch1 conversion done */ +#define PRS_ADC0_SINGLE ((8 << 16) + 0) /**< PRS ADC single conversion done */ +#define PRS_ADC0_SCAN ((8 << 16) + 1) /**< PRS ADC scan conversion done */ +#define PRS_USART0_IRTX ((16 << 16) + 0) /**< PRS USART 0 IRDA out */ +#define PRS_USART0_TXC ((16 << 16) + 1) /**< PRS USART 0 TX complete */ +#define PRS_USART0_RXDATAV ((16 << 16) + 2) /**< PRS USART 0 RX Data Valid */ +#define PRS_USART1_TXC ((17 << 16) + 1) /**< PRS USART 1 TX complete */ +#define PRS_USART1_RXDATAV ((17 << 16) + 2) /**< PRS USART 1 RX Data Valid */ +#define PRS_USART2_TXC ((18 << 16) + 1) /**< PRS USART 2 TX complete */ +#define PRS_USART2_RXDATAV ((18 << 16) + 2) /**< PRS USART 2 RX Data Valid */ +#define PRS_TIMER0_UF ((28 << 16) + 0) /**< PRS Timer 0 Underflow */ +#define PRS_TIMER0_OF ((28 << 16) + 1) /**< PRS Timer 0 Overflow */ +#define PRS_TIMER0_CC0 ((28 << 16) + 2) /**< PRS Timer 0 Compare/Capture 0 */ +#define PRS_TIMER0_CC1 ((28 << 16) + 3) /**< PRS Timer 0 Compare/Capture 1 */ +#define PRS_TIMER0_CC2 ((28 << 16) + 4) /**< PRS Timer 0 Compare/Capture 2 */ +#define PRS_TIMER1_UF ((29 << 16) + 0) /**< PRS Timer 1 Underflow */ +#define PRS_TIMER1_OF ((29 << 16) + 1) /**< PRS Timer 1 Overflow */ +#define PRS_TIMER1_CC0 ((29 << 16) + 2) /**< PRS Timer 1 Compare/Capture 0 */ +#define PRS_TIMER1_CC1 ((29 << 16) + 3) /**< PRS Timer 1 Compare/Capture 1 */ +#define PRS_TIMER1_CC2 ((29 << 16) + 4) /**< PRS Timer 1 Compare/Capture 2 */ +#define PRS_TIMER2_UF ((30 << 16) + 0) /**< PRS Timer 2 Underflow */ +#define PRS_TIMER2_OF ((30 << 16) + 1) /**< PRS Timer 2 Overflow */ +#define PRS_TIMER2_CC0 ((30 << 16) + 2) /**< PRS Timer 2 Compare/Capture 0 */ +#define PRS_TIMER2_CC1 ((30 << 16) + 3) /**< PRS Timer 2 Compare/Capture 1 */ +#define PRS_TIMER2_CC2 ((30 << 16) + 4) /**< PRS Timer 2 Compare/Capture 2 */ +#define PRS_TIMER3_UF ((31 << 16) + 0) /**< PRS Timer 3 Underflow */ +#define PRS_TIMER3_OF ((31 << 16) + 1) /**< PRS Timer 3 Overflow */ +#define PRS_TIMER3_CC0 ((31 << 16) + 2) /**< PRS Timer 3 Compare/Capture 0 */ +#define PRS_TIMER3_CC1 ((31 << 16) + 3) /**< PRS Timer 3 Compare/Capture 1 */ +#define PRS_TIMER3_CC2 ((31 << 16) + 4) /**< PRS Timer 3 Compare/Capture 2 */ +#define PRS_USB_SOF ((36 << 16) + 0) /**< PRS USB Start of Frame */ +#define PRS_USB_SOFSR ((36 << 16) + 1) /**< PRS USB Start of Frame Sent/Received */ +#define PRS_RTC_OF ((40 << 16) + 0) /**< PRS RTC Overflow */ +#define PRS_RTC_COMP0 ((40 << 16) + 1) /**< PRS RTC Compare 0 */ +#define PRS_RTC_COMP1 ((40 << 16) + 2) /**< PRS RTC Compare 1 */ +#define PRS_UART0_TXC ((41 << 16) + 1) /**< PRS USART 0 TX complete */ +#define PRS_UART0_RXDATAV ((41 << 16) + 2) /**< PRS USART 0 RX Data Valid */ +#define PRS_UART1_TXC ((42 << 16) + 1) /**< PRS USART 0 TX complete */ +#define PRS_UART1_RXDATAV ((42 << 16) + 2) /**< PRS USART 0 RX Data Valid */ +#define PRS_GPIO_PIN0 ((48 << 16) + 0) /**< PRS GPIO pin 0 */ +#define PRS_GPIO_PIN1 ((48 << 16) + 1) /**< PRS GPIO pin 1 */ +#define PRS_GPIO_PIN2 ((48 << 16) + 2) /**< PRS GPIO pin 2 */ +#define PRS_GPIO_PIN3 ((48 << 16) + 3) /**< PRS GPIO pin 3 */ +#define PRS_GPIO_PIN4 ((48 << 16) + 4) /**< PRS GPIO pin 4 */ +#define PRS_GPIO_PIN5 ((48 << 16) + 5) /**< PRS GPIO pin 5 */ +#define PRS_GPIO_PIN6 ((48 << 16) + 6) /**< PRS GPIO pin 6 */ +#define PRS_GPIO_PIN7 ((48 << 16) + 7) /**< PRS GPIO pin 7 */ +#define PRS_GPIO_PIN8 ((49 << 16) + 0) /**< PRS GPIO pin 8 */ +#define PRS_GPIO_PIN9 ((49 << 16) + 1) /**< PRS GPIO pin 9 */ +#define PRS_GPIO_PIN10 ((49 << 16) + 2) /**< PRS GPIO pin 10 */ +#define PRS_GPIO_PIN11 ((49 << 16) + 3) /**< PRS GPIO pin 11 */ +#define PRS_GPIO_PIN12 ((49 << 16) + 4) /**< PRS GPIO pin 12 */ +#define PRS_GPIO_PIN13 ((49 << 16) + 5) /**< PRS GPIO pin 13 */ +#define PRS_GPIO_PIN14 ((49 << 16) + 6) /**< PRS GPIO pin 14 */ +#define PRS_GPIO_PIN15 ((49 << 16) + 7) /**< PRS GPIO pin 15 */ +#define PRS_LETIMER0_CH0 ((52 << 16) + 0) /**< PRS LETIMER CH0 Out */ +#define PRS_LETIMER0_CH1 ((52 << 16) + 1) /**< PRS LETIMER CH1 Out */ +#define PRS_BURTC_OF ((55 << 16) + 0) /**< PRS BURTC Overflow */ +#define PRS_BURTC_COMP0 ((55 << 16) + 1) /**< PRS BURTC Compare 0 */ +#define PRS_LESENSE_SCANRES0 ((57 << 16) + 0) /**< PRS LESENSE SCANRES register, bit 0 */ +#define PRS_LESENSE_SCANRES1 ((57 << 16) + 1) /**< PRS LESENSE SCANRES register, bit 1 */ +#define PRS_LESENSE_SCANRES2 ((57 << 16) + 2) /**< PRS LESENSE SCANRES register, bit 2 */ +#define PRS_LESENSE_SCANRES3 ((57 << 16) + 3) /**< PRS LESENSE SCANRES register, bit 3 */ +#define PRS_LESENSE_SCANRES4 ((57 << 16) + 4) /**< PRS LESENSE SCANRES register, bit 4 */ +#define PRS_LESENSE_SCANRES5 ((57 << 16) + 5) /**< PRS LESENSE SCANRES register, bit 5 */ +#define PRS_LESENSE_SCANRES6 ((57 << 16) + 6) /**< PRS LESENSE SCANRES register, bit 6 */ +#define PRS_LESENSE_SCANRES7 ((57 << 16) + 7) /**< PRS LESENSE SCANRES register, bit 7 */ +#define PRS_LESENSE_SCANRES8 ((58 << 16) + 0) /**< PRS LESENSE SCANRES register, bit 8 */ +#define PRS_LESENSE_SCANRES9 ((58 << 16) + 1) /**< PRS LESENSE SCANRES register, bit 9 */ +#define PRS_LESENSE_SCANRES10 ((58 << 16) + 2) /**< PRS LESENSE SCANRES register, bit 10 */ +#define PRS_LESENSE_SCANRES11 ((58 << 16) + 3) /**< PRS LESENSE SCANRES register, bit 11 */ +#define PRS_LESENSE_SCANRES12 ((58 << 16) + 4) /**< PRS LESENSE SCANRES register, bit 12 */ +#define PRS_LESENSE_SCANRES13 ((58 << 16) + 5) /**< PRS LESENSE SCANRES register, bit 13 */ +#define PRS_LESENSE_SCANRES14 ((58 << 16) + 6) /**< PRS LESENSE SCANRES register, bit 14 */ +#define PRS_LESENSE_SCANRES15 ((58 << 16) + 7) /**< PRS LESENSE SCANRES register, bit 15 */ +#define PRS_LESENSE_DEC0 ((59 << 16) + 0) /**< PRS LESENSE Decoder PRS out 0 */ +#define PRS_LESENSE_DEC1 ((59 << 16) + 1) /**< PRS LESENSE Decoder PRS out 1 */ +#define PRS_LESENSE_DEC2 ((59 << 16) + 2) /**< PRS LESENSE Decoder PRS out 2 */ + +/** @} End of group EFM32LG_PRS */ + +