Egor Rumjantsev
The official mbed C/C SDK provides the software platform and libraries to build your applications.
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F334R8/stm32f3xx_hal_rcc_ex.h
- Revision:
- 86:04dd9b1680ae
- Child:
- 92:4fc01daae5a5
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_rcc_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,2212 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of RCC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_RCC_EX_H
+#define __STM32F3xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+#if defined(STM32F301x8) || defined(STM32F318xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F301x8 || STM32F318xx */
+
+#if defined(STM32F302x8)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F302x8 */
+
+#if defined(STM32F302xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F302xC */
+
+#if defined(STM32F303xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Adc34ClockSelection; /*!< ADC3 & ADC4 clock source
+ This parameter can be a value of @ref RCCEx_ADC34_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim8ClockSelection; /*!< TIM8 clock source
+ This parameter can be a value of @ref RCCEx_TIM8_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F303xC */
+
+#if defined(STM32F358xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Adc34ClockSelection; /*!< ADC3 & ADC4 clock source
+ This parameter can be a value of @ref RCCEx_ADC34_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim8ClockSelection; /*!< TIM8 clock source
+ This parameter can be a value of @ref RCCEx_TIM8_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F358xx */
+
+#if defined(STM32F303x8)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F303x8 */
+
+#if defined(STM32F334x8)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Hrtim1ClockSelection; /*!< HRTIM1 clock source
+ This parameter can be a value of @ref RCCEx_HRTIM1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F334x8 */
+
+#if defined(STM32F328xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F328xx */
+
+#if defined(STM32F373xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t SdadcClockSelection; /*!< SDADC clock prescaler
+ This parameter can be a value of @ref RCCEx_SDADC_Clock_Prescaler */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F373xC */
+
+#if defined(STM32F378xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t SdadcClockSelection; /*!< SDADC clock prescaler
+ This parameter can be a value of @ref RCCEx_SDADC_Clock_Prescaler */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F378xx */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F318xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC1 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_I2C3 ((uint32_t)0x00008000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_TIM15 ((uint32_t)0x00040000)
+#define RCC_PERIPHCLK_TIM16 ((uint32_t)0x00080000)
+#define RCC_PERIPHCLK_TIM17 ((uint32_t)0x00100000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | \
+ RCC_PERIPHCLK_TIM17 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F301x8 || STM32F318xx */
+
+#if defined(STM32F302x8)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC1 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_I2C3 ((uint32_t)0x00008000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+#define RCC_PERIPHCLK_TIM15 ((uint32_t)0x00040000)
+#define RCC_PERIPHCLK_TIM16 ((uint32_t)0x00080000)
+#define RCC_PERIPHCLK_TIM17 ((uint32_t)0x00100000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB | \
+ RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | \
+ RCC_PERIPHCLK_TIM17))
+#endif /* STM32F302x8 */
+
+#if defined(STM32F302xC)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_UART4 ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_UART5 ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F302xC */
+
+#if defined(STM32F303xC)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_UART4 ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_UART5 ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_ADC34 ((uint32_t)0x00000100)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_TIM8 ((uint32_t)0x00002000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_ADC34 | \
+ RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM8 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F303xC */
+
+#if defined(STM32F358xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_UART4 ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_UART5 ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_ADC34 ((uint32_t)0x00000100)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_TIM8 ((uint32_t)0x00002000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_ADC34 | \
+ RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM8 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F358xx */
+
+#if defined(STM32F303x8)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_ADC12 | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F303x8 */
+
+#if defined(STM32F334x8)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_HRTIM1 ((uint32_t)0x00004000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_ADC12 | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_HRTIM1 | \
+ RCC_PERIPHCLK_RTC))
+#endif /* STM32F334x8 */
+
+#if defined(STM32F328xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_ADC12 | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F328xx */
+
+#if defined(STM32F373xC)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC1 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_SDADC ((uint32_t)0x00000800)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_SDADC | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F373xC */
+
+#if defined(STM32F378xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC1 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_SDADC ((uint32_t)0x00000800)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_SDADC | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC))
+#endif /* STM32F378xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C3_Clock_Source
+ * @{
+ */
+#define RCC_I2C3CLKSOURCE_HSI RCC_CFGR3_I2C3SW_HSI
+#define RCC_I2C3CLKSOURCE_SYSCLK RCC_CFGR3_I2C3SW_SYSCLK
+
+#define IS_RCC_I2C3CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C3CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C3CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC1_Clock_Source
+ * @{
+ */
+#define RCC_ADC1PLLCLK_OFF RCC_CFGR2_ADC1PRES_NO
+#define RCC_ADC1PLLCLK_DIV1 RCC_CFGR2_ADC1PRES_DIV1
+#define RCC_ADC1PLLCLK_DIV2 RCC_CFGR2_ADC1PRES_DIV2
+#define RCC_ADC1PLLCLK_DIV4 RCC_CFGR2_ADC1PRES_DIV4
+#define RCC_ADC1PLLCLK_DIV6 RCC_CFGR2_ADC1PRES_DIV6
+#define RCC_ADC1PLLCLK_DIV8 RCC_CFGR2_ADC1PRES_DIV8
+#define RCC_ADC1PLLCLK_DIV10 RCC_CFGR2_ADC1PRES_DIV10
+#define RCC_ADC1PLLCLK_DIV12 RCC_CFGR2_ADC1PRES_DIV12
+#define RCC_ADC1PLLCLK_DIV16 RCC_CFGR2_ADC1PRES_DIV16
+#define RCC_ADC1PLLCLK_DIV32 RCC_CFGR2_ADC1PRES_DIV32
+#define RCC_ADC1PLLCLK_DIV64 RCC_CFGR2_ADC1PRES_DIV64
+#define RCC_ADC1PLLCLK_DIV128 RCC_CFGR2_ADC1PRES_DIV128
+#define RCC_ADC1PLLCLK_DIV256 RCC_CFGR2_ADC1PRES_DIV256
+
+#define IS_RCC_ADC1PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC1PLLCLK_OFF) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2S_Clock_Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_SYSCLK RCC_CFGR_I2SSRC_SYSCLK
+#define RCC_I2SCLKSOURCE_EXT RCC_CFGR_I2SSRC_EXT
+
+#define IS_RCC_I2SCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_I2SCLKSOURCE_EXT))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM1_Clock_Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM15_Clock_Source
+ * @{
+ */
+#define RCC_TIM15CLK_HCLK RCC_CFGR3_TIM15SW_HCLK
+#define RCC_TIM15CLK_PLLCLK RCC_CFGR3_TIM15SW_PLL
+
+#define IS_RCC_TIM15CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM15CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM15CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM16_Clock_Source
+ * @{
+ */
+#define RCC_TIM16CLK_HCLK RCC_CFGR3_TIM16SW_HCLK
+#define RCC_TIM16CLK_PLLCLK RCC_CFGR3_TIM16SW_PLL
+
+#define IS_RCC_TIM16CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM16CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM16CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM17_Clock_Source
+ * @{
+ */
+#define RCC_TIM17CLK_HCLK RCC_CFGR3_TIM17SW_HCLK
+#define RCC_TIM17CLK_PLLCLK RCC_CFGR3_TIM17SW_PLL
+
+#define IS_RCC_TIM17CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM17CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM17CLK_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC12_Clock_Source
+ * @{
+ */
+
+/* ADC1 & ADC2 */
+#define RCC_ADC12PLLCLK_OFF RCC_CFGR2_ADCPRE12_NO
+#define RCC_ADC12PLLCLK_DIV1 RCC_CFGR2_ADCPRE12_DIV1
+#define RCC_ADC12PLLCLK_DIV2 RCC_CFGR2_ADCPRE12_DIV2
+#define RCC_ADC12PLLCLK_DIV4 RCC_CFGR2_ADCPRE12_DIV4
+#define RCC_ADC12PLLCLK_DIV6 RCC_CFGR2_ADCPRE12_DIV6
+#define RCC_ADC12PLLCLK_DIV8 RCC_CFGR2_ADCPRE12_DIV8
+#define RCC_ADC12PLLCLK_DIV10 RCC_CFGR2_ADCPRE12_DIV10
+#define RCC_ADC12PLLCLK_DIV12 RCC_CFGR2_ADCPRE12_DIV12
+#define RCC_ADC12PLLCLK_DIV16 RCC_CFGR2_ADCPRE12_DIV16
+#define RCC_ADC12PLLCLK_DIV32 RCC_CFGR2_ADCPRE12_DIV32
+#define RCC_ADC12PLLCLK_DIV64 RCC_CFGR2_ADCPRE12_DIV64
+#define RCC_ADC12PLLCLK_DIV128 RCC_CFGR2_ADCPRE12_DIV128
+#define RCC_ADC12PLLCLK_DIV256 RCC_CFGR2_ADCPRE12_DIV256
+
+#define IS_RCC_ADC12PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC12PLLCLK_OFF) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2S_Clock_Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_SYSCLK RCC_CFGR_I2SSRC_SYSCLK
+#define RCC_I2SCLKSOURCE_EXT RCC_CFGR_I2SSRC_EXT
+
+#define IS_RCC_I2SCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_I2SCLKSOURCE_EXT))
+/**
+ * @}
+ */
+/** @defgroup RCCEx_TIM1_Clock_Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART4_Clock_Source
+ * @{
+ */
+#define RCC_UART4CLKSOURCE_PCLK1 RCC_CFGR3_UART4SW_PCLK
+#define RCC_UART4CLKSOURCE_SYSCLK RCC_CFGR3_UART4SW_SYSCLK
+#define RCC_UART4CLKSOURCE_LSE RCC_CFGR3_UART4SW_LSE
+#define RCC_UART4CLKSOURCE_HSI RCC_CFGR3_UART4SW_HSI
+
+#define IS_RCC_UART4CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART4CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART5_Clock_Source
+ * @{
+ */
+#define RCC_UART5CLKSOURCE_PCLK1 RCC_CFGR3_UART5SW_PCLK
+#define RCC_UART5CLKSOURCE_SYSCLK RCC_CFGR3_UART5SW_SYSCLK
+#define RCC_UART5CLKSOURCE_LSE RCC_CFGR3_UART5SW_LSE
+#define RCC_UART5CLKSOURCE_HSI RCC_CFGR3_UART5SW_HSI
+
+#define IS_RCC_UART5CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART5CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC34_Clock_Source
+ * @{
+ */
+
+/* ADC3 & ADC4 */
+#define RCC_ADC34PLLCLK_OFF RCC_CFGR2_ADCPRE34_NO
+#define RCC_ADC34PLLCLK_DIV1 RCC_CFGR2_ADCPRE34_DIV1
+#define RCC_ADC34PLLCLK_DIV2 RCC_CFGR2_ADCPRE34_DIV2
+#define RCC_ADC34PLLCLK_DIV4 RCC_CFGR2_ADCPRE34_DIV4
+#define RCC_ADC34PLLCLK_DIV6 RCC_CFGR2_ADCPRE34_DIV6
+#define RCC_ADC34PLLCLK_DIV8 RCC_CFGR2_ADCPRE34_DIV8
+#define RCC_ADC34PLLCLK_DIV10 RCC_CFGR2_ADCPRE34_DIV10
+#define RCC_ADC34PLLCLK_DIV12 RCC_CFGR2_ADCPRE34_DIV12
+#define RCC_ADC34PLLCLK_DIV16 RCC_CFGR2_ADCPRE34_DIV16
+#define RCC_ADC34PLLCLK_DIV32 RCC_CFGR2_ADCPRE34_DIV32
+#define RCC_ADC34PLLCLK_DIV64 RCC_CFGR2_ADCPRE34_DIV64
+#define RCC_ADC34PLLCLK_DIV128 RCC_CFGR2_ADCPRE34_DIV128
+#define RCC_ADC34PLLCLK_DIV256 RCC_CFGR2_ADCPRE34_DIV256
+
+#define IS_RCC_ADC34PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC34PLLCLK_OFF) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM8_Clock_Source
+ * @{
+ */
+#define RCC_TIM8CLK_HCLK RCC_CFGR3_TIM8SW_HCLK
+#define RCC_TIM8CLK_PLLCLK RCC_CFGR3_TIM8SW_PLL
+
+#define IS_RCC_TIM8CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM8CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM8CLK_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK1 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC12_Clock_Source
+ * @{
+ */
+/* ADC1 & ADC2 */
+#define RCC_ADC12PLLCLK_OFF RCC_CFGR2_ADCPRE12_NO
+#define RCC_ADC12PLLCLK_DIV1 RCC_CFGR2_ADCPRE12_DIV1
+#define RCC_ADC12PLLCLK_DIV2 RCC_CFGR2_ADCPRE12_DIV2
+#define RCC_ADC12PLLCLK_DIV4 RCC_CFGR2_ADCPRE12_DIV4
+#define RCC_ADC12PLLCLK_DIV6 RCC_CFGR2_ADCPRE12_DIV6
+#define RCC_ADC12PLLCLK_DIV8 RCC_CFGR2_ADCPRE12_DIV8
+#define RCC_ADC12PLLCLK_DIV10 RCC_CFGR2_ADCPRE12_DIV10
+#define RCC_ADC12PLLCLK_DIV12 RCC_CFGR2_ADCPRE12_DIV12
+#define RCC_ADC12PLLCLK_DIV16 RCC_CFGR2_ADCPRE12_DIV16
+#define RCC_ADC12PLLCLK_DIV32 RCC_CFGR2_ADCPRE12_DIV32
+#define RCC_ADC12PLLCLK_DIV64 RCC_CFGR2_ADCPRE12_DIV64
+#define RCC_ADC12PLLCLK_DIV128 RCC_CFGR2_ADCPRE12_DIV128
+#define RCC_ADC12PLLCLK_DIV256 RCC_CFGR2_ADCPRE12_DIV256
+
+#define IS_RCC_ADC12PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC12PLLCLK_OFF) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM1_Clock_Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+
+/** @defgroup RCCEx_HRTIM1_Clock_Source
+ * @{
+ */
+#define RCC_HRTIM1CLK_HCLK RCC_CFGR3_HRTIM1SW_HCLK
+#define RCC_HRTIM1CLK_PLLCLK RCC_CFGR3_HRTIM1SW_PLL
+
+#define IS_RCC_HRTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_HRTIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_HRTIM1CLK_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC1_Clock_Source
+ * @{
+ */
+
+/* ADC1 */
+#define RCC_ADC1PCLK2_DIV2 RCC_CFGR_ADCPRE_DIV2
+#define RCC_ADC1PCLK2_DIV4 RCC_CFGR_ADCPRE_DIV4
+#define RCC_ADC1PCLK2_DIV6 RCC_CFGR_ADCPRE_DIV6
+#define RCC_ADC1PCLK2_DIV8 RCC_CFGR_ADCPRE_DIV8
+
+#define IS_RCC_ADC1PCLK2_DIV(ADCCLK) (((ADCCLK) == RCC_ADC1PCLK2_DIV2) || ((ADCCLK) == RCC_ADC1PCLK2_DIV4) || \
+ ((ADCCLK) == RCC_ADC1PCLK2_DIV6) || ((ADCCLK) == RCC_ADC1PCLK2_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CEC_Clock_Source
+ * @{
+ */
+#define RCC_CECCLKSOURCE_HSI RCC_CFGR3_CECSW_HSI_DIV244
+#define RCC_CECCLKSOURCE_LSE RCC_CFGR3_CECSW_LSE
+
+#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_CECCLKSOURCE_LSE))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SDADC_Clock_Prescaler
+ * @{
+ */
+#define RCC_SDADCSYSCLK_DIV1 RCC_CFGR_SDADCPRE_DIV1
+#define RCC_SDADCSYSCLK_DIV2 RCC_CFGR_SDADCPRE_DIV2
+#define RCC_SDADCSYSCLK_DIV4 RCC_CFGR_SDADCPRE_DIV4
+#define RCC_SDADCSYSCLK_DIV6 RCC_CFGR_SDADCPRE_DIV6
+#define RCC_SDADCSYSCLK_DIV8 RCC_CFGR_SDADCPRE_DIV8
+#define RCC_SDADCSYSCLK_DIV10 RCC_CFGR_SDADCPRE_DIV10
+#define RCC_SDADCSYSCLK_DIV12 RCC_CFGR_SDADCPRE_DIV12
+#define RCC_SDADCSYSCLK_DIV14 RCC_CFGR_SDADCPRE_DIV14
+#define RCC_SDADCSYSCLK_DIV16 RCC_CFGR_SDADCPRE_DIV16
+#define RCC_SDADCSYSCLK_DIV20 RCC_CFGR_SDADCPRE_DIV20
+#define RCC_SDADCSYSCLK_DIV24 RCC_CFGR_SDADCPRE_DIV24
+#define RCC_SDADCSYSCLK_DIV28 RCC_CFGR_SDADCPRE_DIV28
+#define RCC_SDADCSYSCLK_DIV32 RCC_CFGR_SDADCPRE_DIV32
+#define RCC_SDADCSYSCLK_DIV36 RCC_CFGR_SDADCPRE_DIV36
+#define RCC_SDADCSYSCLK_DIV40 RCC_CFGR_SDADCPRE_DIV40
+#define RCC_SDADCSYSCLK_DIV44 RCC_CFGR_SDADCPRE_DIV44
+#define RCC_SDADCSYSCLK_DIV48 RCC_CFGR_SDADCPRE_DIV48
+
+#define IS_RCC_SDADCSYSCLK_DIV(DIV) (((DIV) == RCC_SDADCSYSCLK_DIV1) || ((DIV) == RCC_SDADCSYSCLK_DIV2) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV4) || ((DIV) == RCC_SDADCSYSCLK_DIV6) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV8) || ((DIV) == RCC_SDADCSYSCLK_DIV10) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV12) || ((DIV) == RCC_SDADCSYSCLK_DIV14) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV16) || ((DIV) == RCC_SDADCSYSCLK_DIV20) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV24) || ((DIV) == RCC_SDADCSYSCLK_DIV28) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV32) || ((DIV) == RCC_SDADCSYSCLK_DIV36) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV40) || ((DIV) == RCC_SDADCSYSCLK_DIV44) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV48))
+/**
+ * @}
+ */
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302x8) || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F373xC)
+/** @defgroup RCCEx_USB_Clock_Source
+ * @{
+ */
+#define RCC_USBPLLCLK_DIV1 RCC_CFGR_USBPRE_DIV1
+#define RCC_USBPLLCLK_DIV1_5 RCC_CFGR_USBPRE_DIV1_5
+
+#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBPLLCLK_DIV1) || \
+ ((SOURCE) == RCC_USBPLLCLK_DIV1_5))
+/**
+ * @}
+ */
+
+#endif /* STM32F302x8 || STM32F302xC || STM32F303xC || STM32F373xC */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup RCCEx_MCOx_Clock_Prescaler
+ * @{
+ */
+#define RCC_MCO_NODIV ((uint32_t)0x00000000)
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCO_NODIV))
+/**
+ * @}
+ */
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+
+/** @defgroup RCCEx_MCOx_Clock_Prescaler
+ * @{
+ */
+#define RCC_MCO_DIV1 ((uint32_t)0x00000000)
+#define RCC_MCO_DIV2 ((uint32_t)0x10000000)
+#define RCC_MCO_DIV4 ((uint32_t)0x20000000)
+#define RCC_MCO_DIV8 ((uint32_t)0x30000000)
+#define RCC_MCO_DIV16 ((uint32_t)0x40000000)
+#define RCC_MCO_DIV32 ((uint32_t)0x50000000)
+#define RCC_MCO_DIV64 ((uint32_t)0x60000000)
+#define RCC_MCO_DIV128 ((uint32_t)0x70000000)
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCO_DIV1) || ((DIV) == RCC_MCO_DIV2) || \
+ ((DIV) == RCC_MCO_DIV4) || ((DIV) == RCC_MCO_DIV8) || \
+ ((DIV) == RCC_MCO_DIV16) || ((DIV) == RCC_MCO_DIV32) || \
+ ((DIV) == RCC_MCO_DIV64) || ((DIV) == RCC_MCO_DIV128))
+/**
+ * @}
+ */
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Enable or disable the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __ADC1_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_ADC1EN))
+
+#define __ADC1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC1EN))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __DMA2_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_DMA2EN))
+#define __GPIOE_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOEEN))
+#define __ADC12_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_ADC12EN))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_CLK_ENABLE() __ADC12_CLK_ENABLE()
+#define __ADC2_CLK_ENABLE() __ADC12_CLK_ENABLE()
+
+#define __DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
+#define __GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
+#define __ADC12_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC12EN))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_CLK_DISABLE() __ADC12_CLK_DISABLE()
+#define __ADC2_CLK_DISABLE() __ADC12_CLK_DISABLE()
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define __ADC34_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_ADC34EN))
+
+#define __ADC34_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC34EN))
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __ADC12_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_ADC12EN))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_CLK_ENABLE() __ADC12_CLK_ENABLE()
+#define __ADC2_CLK_ENABLE() __ADC12_CLK_ENABLE()
+
+#define __ADC12_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC12EN))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_CLK_DISABLE() __ADC12_CLK_DISABLE()
+#define __ADC2_CLK_DISABLE() __ADC12_CLK_DISABLE()
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __DMA2_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_DMA2EN))
+#define __GPIOE_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOEEN))
+
+#define __DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
+#define __GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
+#endif /* STM32F373xC || STM32F378xx */
+
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __SPI2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI3EN))
+#define __I2C2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C2EN))
+#define __I2C3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C3EN))
+
+#define __SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __TIM3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM3EN))
+#define __TIM4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM4EN))
+#define __SPI2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI3EN))
+#define __UART4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART4EN))
+#define __UART5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART5EN))
+#define __I2C2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C2EN))
+
+#define __TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __TIM3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM3EN))
+#define __DAC2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DAC2EN))
+
+#define __TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __DAC2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DAC2EN))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __TIM3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM3EN))
+#define __TIM4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM4EN))
+#define __TIM5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM5EN))
+#define __TIM12_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM12EN))
+#define __TIM13_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM13EN))
+#define __TIM14_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM14EN))
+#define __TIM18_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM18EN))
+#define __SPI2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI3EN))
+#define __I2C2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C2EN))
+#define __DAC2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DAC2EN))
+#define __CEC_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CECEN))
+
+#define __TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
+#define __TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __TIM18_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM18EN))
+#define __SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __DAC2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DAC2EN))
+#define __CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F303x8) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#define __TIM7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM7EN))
+
+#define __TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#endif /* STM32F303x8 || STM32F303xC || STM32F358xx || STM32F334x8 || STM32F328xx || STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302x8) || defined(STM32F302xC) || \
+ defined(STM32F303xC) || defined(STM32F373xC)
+#define __USB_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USBEN))
+
+#define __USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN))
+#endif /* STM32F302x8 || STM32F302xC || STM32F303xC|| STM32F373xC */
+
+#if !defined(STM32F301x8)
+#define __CAN_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CANEN))
+
+#define __CAN_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CANEN))
+#endif /* STM32F301x8*/
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __SPI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI1EN))
+
+#define __SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define __TIM8_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM8EN))
+
+#define __TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __SPI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI1EN))
+
+#define __SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+#define __HRTIM1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_HRTIM1EN))
+
+#define __HRTIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_HRTIM1EN))
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __ADC1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC1EN))
+#define __SPI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI1EN))
+#define __TIM19_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM19EN))
+#define __SDADC1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SDADC1EN))
+#define __SDADC2_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SDADC2EN))
+#define __SDADC3_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SDADC3EN))
+
+#define __ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __TIM19_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM19EN))
+#define __SDADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDADC1EN))
+#define __SDADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDADC2EN))
+#define __SDADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDADC3EN))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __TIM1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM1EN))
+
+#define __TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+/** @brief Force or release AHB peripheral reset.
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __ADC1_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC1RST))
+
+#define __ADC1_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC1RST))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
+#define __ADC12_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_FORCE_RESET() __ADC12_FORCE_RESET()
+#define __ADC2_FORCE_RESET() __ADC12_FORCE_RESET()
+
+#define __GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
+#define __ADC12_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_RELEASE_RESET() __ADC12_RELEASE_RESET()
+#define __ADC2_RELEASE_RESET() __ADC12_RELEASE_RESET()
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define __ADC34_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC34RST))
+
+#define __ADC34_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC34RST))
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __ADC12_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_FORCE_RESET() __ADC12_FORCE_RESET()
+#define __ADC2_FORCE_RESET() __ADC12_FORCE_RESET()
+
+#define __ADC12_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_RELEASE_RESET() __ADC12_RELEASE_RESET()
+#define __ADC2_RELEASE_RESET() __ADC12_RELEASE_RESET()
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
+
+#define __GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
+#endif /* STM32F373xC || STM32F378xx */
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+
+#define __TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __DAC2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DAC2RST))
+
+#define __TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __DAC2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DAC2RST))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
+#define __TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __TIM18_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM18RST))
+#define __SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __DAC2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DAC2RST))
+#define __CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+
+#define __TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
+#define __TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __TIM18_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM18RST))
+#define __SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __DAC2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DAC2RST))
+#define __CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F303x8) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#define __TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+
+#define __TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#endif /* STM32F303x8 || STM32F303xC || STM32F358xx || STM32F334x8 || STM32F328xx || STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302x8) || defined(STM32F302xC) || \
+ defined(STM32F303xC) || defined(STM32F373xC)
+#define __USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST))
+
+#define __USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST))
+#endif /* STM32F302x8 || STM32F302xC || STM32F303xC|| STM32F373xC */
+
+#if !defined(STM32F301x8)
+#define __CAN_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CANRST))
+
+#define __CAN_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CANRST))
+#endif /* STM32F301x8*/
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+
+#define __SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define __TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+
+#define __TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+
+#define __SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+#define __HRTIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_HRTIM1RST))
+
+#define __HRTIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_HRTIM1RST))
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST))
+#define __SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __TIM19_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM19RST))
+#define __SDADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDADC1RST))
+#define __SDADC2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDADC2RST))
+#define __SDADC3_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDADC3RST))
+
+#define __ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST))
+#define __SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __TIM19_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM19RST))
+#define __SDADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDADC1RST))
+#define __SDADC2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDADC2RST))
+#define __SDADC3_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDADC3RST))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+
+#define __TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ * @param __I2C2CLKSource__: specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C2SW, (uint32_t)(__I2C2CLKSource__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C2SW)))
+
+/** @brief Macro to configure the I2C3 clock (I2C3CLK).
+ * @param __I2C3CLKSource__: specifies the I2C3 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock
+ * @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_I2C3_CONFIG(__I2C3CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C3SW, (uint32_t)(__I2C3CLKSource__))
+
+/** @brief Macro to get the I2C3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock
+ * @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_GET_I2C3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C3SW)))
+
+/** @brief Macro to configure the TIM1 clock (TIM1CLK).
+ * @param __TIM1CLKSource__: specifies the TIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_TIM1_CONFIG(__TIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM1SW, (uint32_t)(__TIM1CLKSource__))
+
+/** @brief Macro to get the TIM1 clock (TIM1CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM1SW)))
+
+/** @brief Macro to configure the TIM15 clock (TIM15CLK).
+ * @param __TIM15CLKSource__: specifies the TIM15 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM15CLKSOURCE_HCLK: HCLK selected as TIM15 clock
+ * @arg RCC_TIM15CLKSOURCE_PLL: PLL Clock selected as TIM15 clock
+ */
+#define __HAL_RCC_TIM15_CONFIG(__TIM15CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM15SW, (uint32_t)(__TIM15CLKSource__))
+
+/** @brief Macro to get the TIM15 clock (TIM15CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM15CLKSOURCE_HCLK: HCLK selected as TIM15 clock
+ * @arg RCC_TIM15CLKSOURCE_PLL: PLL Clock selected as TIM15 clock
+ */
+#define __HAL_RCC_GET_TIM15_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM15SW)))
+
+/** @brief Macro to configure the TIM16 clock (TIM16CLK).
+ * @param __TIM16CLKSource__: specifies the TIM16 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM16CLKSOURCE_HCLK: HCLK selected as TIM16 clock
+ * @arg RCC_TIM16CLKSOURCE_PLL: PLL Clock selected as TIM16 clock
+ */
+#define __HAL_RCC_TIM16_CONFIG(__TIM16CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM16SW, (uint32_t)(__TIM16CLKSource__))
+
+/** @brief Macro to get the TIM16 clock (TIM16CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM16CLKSOURCE_HCLK: HCLK selected as TIM16 clock
+ * @arg RCC_TIM16CLKSOURCE_PLL: PLL Clock selected as TIM16 clock
+ */
+#define __HAL_RCC_GET_TIM16_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM16SW)))
+
+/** @brief Macro to configure the TIM17 clock (TIM17CLK).
+ * @param __TIM17CLKSource__: specifies the TIM17 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM17CLKSOURCE_HCLK: HCLK selected as TIM17 clock
+ * @arg RCC_TIM17CLKSOURCE_PLL: PLL Clock selected as TIM17 clock
+ */
+#define __HAL_RCC_TIM17_CONFIG(__TIM17CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM17SW, (uint32_t)(__TIM17CLKSource__))
+
+/** @brief Macro to get the TIM17 clock (TIM17CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM17CLKSOURCE_HCLK: HCLK selected as TIM17 clock
+ * @arg RCC_TIM17CLKSOURCE_PLL: PLL Clock selected as TIM17 clock
+ */
+#define __HAL_RCC_GET_TIM17_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM17SW)))
+
+/** @brief Macro to configure the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param __I2SCLKSource__: specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_SYSCLK: SYSCLK clock used as I2S clock source
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_I2S_CONFIG(__I2SCLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_I2SSRC, (uint32_t)(__I2SCLKSource__))
+
+/** @brief Macro to get the I2S clock source (I2SCLK).
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_SYSCLK: SYSCLK clock used as I2S clock source
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_GET_I2S_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC)))
+
+/** @brief Macro to configure the ADC1 clock (ADC1CLK).
+ * @param __ADC1CLKSource__: specifies the ADC1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_ADC1PLLCLK_OFF: ADC1 PLL clock disabled, ADC1 can use AHB clock
+ * @arg RCC_ADC1PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 clock
+ */
+#define __HAL_RCC_ADC1_CONFIG(__ADC1CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADC1PRES, (uint32_t)(__ADC1CLKSource__))
+
+/** @brief Macro to get the ADC1 clock
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_ADC1PLLCLK_OFF: ADC1 PLL clock disabled, ADC1 can use AHB clock
+ * @arg RCC_ADC1PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 clock
+ */
+#define __HAL_RCC_GET_ADC1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADC1PRES)))
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ * @param __I2C2CLKSource__: specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C2SW, (uint32_t)(__I2C2CLKSource__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C2SW)))
+
+/** @brief Macro to configure the ADC1 & ADC2 clock (ADC12CLK).
+ * @param __ADC12CLKSource__: specifies the ADC1 & ADC2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_ADC12PLLCLK_OFF: ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg RCC_ADC12PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_ADC12_CONFIG(__ADC12CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADCPRE12, (uint32_t)(__ADC12CLKSource__))
+
+/** @brief Macro to get the ADC1 & ADC2 clock
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_ADC12PLLCLK_OFF: ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg RCC_ADC12PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_GET_ADC12_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADCPRE12)))
+
+/** @brief Macro to configure the TIM1 clock (TIM1CLK).
+ * @param __TIM1CLKSource__: specifies the TIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_TIM1_CONFIG(__TIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM1SW, (uint32_t)(__TIM1CLKSource__))
+
+/** @brief Macro to get the TIM1 clock (TIM1CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM1SW)))
+
+/** @brief Macro to configure the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param __I2SCLKSource__: specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_SYSCLK: SYSCLK clock used as I2S clock source
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_I2S_CONFIG(__I2SCLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_I2SSRC, (uint32_t)(__I2SCLKSource__))
+
+/** @brief Macro to get the I2S clock source (I2SCLK).
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_SYSCLK: SYSCLK clock used as I2S clock source
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_GET_I2S_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC)))
+
+/** @brief Macro to configure the UART4 clock (UART4CLK).
+ * @param __UART4CLKSource__: specifies the UART4 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_UART4CLKSOURCE_PCLK1: PCLK1 selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_SYSCLK: System Clock selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock
+ */
+#define __HAL_RCC_UART4_CONFIG(__UART4CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_UART4SW, (uint32_t)(__UART4CLKSource__))
+
+/** @brief Macro to get the UART4 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_UART4CLKSOURCE_PCLK1: PCLK1 selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_SYSCLK: System Clock selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock
+ */
+#define __HAL_RCC_GET_UART4_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_UART4SW)))
+
+/** @brief Macro to configure the UART5 clock (UART5CLK).
+ * @param __UART5CLKSource__: specifies the UART5 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_UART5CLKSOURCE_PCLK1: PCLK1 selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_SYSCLK: System Clock selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock
+ */
+#define __HAL_RCC_UART5_CONFIG(__UART5CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_UART5SW, (uint32_t)(__UART5CLKSource__))
+
+/** @brief Macro to get the UART5 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_UART5CLKSOURCE_PCLK1: PCLK1 selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_SYSCLK: System Clock selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock
+ */
+#define __HAL_RCC_GET_UART5_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_UART5SW)))
+
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+
+/** @brief Macro to configure the ADC3 & ADC4 clock (ADC34CLK).
+ * @param __ADC34CLKSource__: specifies the ADC3 & ADC4 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_ADC34PLLCLK_OFF: ADC3 & ADC4 PLL clock disabled, ADC3 & ADC4 can use AHB clock
+ * @arg RCC_ADC34PLLCLK_DIV1: PLL clock divided by 1 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV2: PLL clock divided by 2 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV4: PLL clock divided by 4 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV6: PLL clock divided by 6 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV8: PLL clock divided by 8 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV10: PLL clock divided by 10 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV12: PLL clock divided by 12 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV16: PLL clock divided by 16 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV32: PLL clock divided by 32 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV64: PLL clock divided by 64 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV128: PLL clock divided by 128 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV256: PLL clock divided by 256 selected as ADC3 & ADC4 clock
+ */
+#define __HAL_RCC_ADC34_CONFIG(__ADC34CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADCPRE34, (uint32_t)(__ADC34CLKSource__))
+
+/** @brief Macro to get the ADC3 & ADC4 clock
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_ADC34PLLCLK_OFF: ADC3 & ADC4 PLL clock disabled, ADC3 & ADC4 can use AHB clock
+ * @arg RCC_ADC34PLLCLK_DIV1: PLL clock divided by 1 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV2: PLL clock divided by 2 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV4: PLL clock divided by 4 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV6: PLL clock divided by 6 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV8: PLL clock divided by 8 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV10: PLL clock divided by 10 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV12: PLL clock divided by 12 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV16: PLL clock divided by 16 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV32: PLL clock divided by 32 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV64: PLL clock divided by 64 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV128: PLL clock divided by 128 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV256: PLL clock divided by 256 selected as ADC3 & ADC4 clock
+ */
+#define __HAL_RCC_GET_ADC34_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADCPRE34)))
+
+/** @brief Macro to configure the TIM8 clock (TIM8CLK).
+ * @param __TIM8CLKSource__: specifies the TIM8 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM8CLKSOURCE_HCLK: HCLK selected as TIM8 clock
+ * @arg RCC_TIM8CLKSOURCE_PLL: PLL Clock selected as TIM8 clock
+ */
+#define __HAL_RCC_TIM8_CONFIG(__TIM8CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM8SW, (uint32_t)(__TIM8CLKSource__))
+
+/** @brief Macro to get the TIM8 clock (TIM8CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM8CLKSOURCE_HCLK: HCLK selected as TIM8 clock
+ * @arg RCC_TIM8CLKSOURCE_PLL: PLL Clock selected as TIM8 clock
+ */
+#define __HAL_RCC_GET_TIM8_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM8SW)))
+
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+
+/** @brief Macro to configure the ADC1 & ADC2 clock (ADC12CLK).
+ * @param __ADC12CLKSource__: specifies the ADC1 & ADC2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_ADC12PLLCLK_OFF: ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg RCC_ADC12PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_ADC12_CONFIG(__ADC12CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADCPRE12, (uint32_t)(__ADC12CLKSource__))
+
+/** @brief Macro to get the ADC1 & ADC2 clock
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_ADC12PLLCLK_OFF: ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg RCC_ADC12PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_GET_ADC12_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADCPRE12)))
+
+/** @brief Macro to configure the TIM1 clock (TIM1CLK).
+ * @param __TIM1CLKSource__: specifies the TIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_TIM1_CONFIG(__TIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM1SW, (uint32_t)(__TIM1CLKSource__))
+
+/** @brief Macro to get the TIM1 clock (TIM1CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM1SW)))
+
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+
+/** @brief Macro to configure the HRTIM1 clock.
+ * @param __HRTIM1CLKSource__: specifies the HRTIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_HRTIM1CLKSOURCE_HCLK: HCLK selected as HRTIM1 clock
+ * @arg RCC_HRTIM1CLKSOURCE_PLL: PLL Clock selected as HRTIM1 clock
+ */
+#define __HAL_RCC_HRTIM1_CONFIG(__HRTIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_HRTIM1SW, (uint32_t)(__HRTIM1CLKSource__))
+
+/** @brief Macro to get the HRTIM1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_HRTIM1CLKSOURCE_HCLK: HCLK selected as HRTIM1 clock
+ * @arg RCC_HRTIM1CLKSOURCE_PLL: PLL Clock selected as HRTIM1 clock
+ */
+#define __HAL_RCC_GET_HRTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_HRTIM1SW)))
+
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ * @param __I2C2CLKSource__: specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C2SW, (uint32_t)(__I2C2CLKSource__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C2SW)))
+
+/** @brief Macro to configure the ADC1 clock (ADC1CLK).
+ * @param __ADC1CLKSource__: specifies the ADC1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_ADC1PCLK2_DIV2: PCLK2 clock divided by 2 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV4: PCLK2 clock divided by 4 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV6: PCLK2 clock divided by 6 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV8: PCLK2 clock divided by 8 selected as ADC1 clock
+ */
+#define __HAL_RCC_ADC1_CONFIG(__ADC1CLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_ADCPRE, (uint32_t)(__ADC1CLKSource__))
+
+/** @brief Macro to get the ADC1 clock (ADC1CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_ADC1PCLK2_DIV2: PCLK2 clock divided by 2 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV4: PCLK2 clock divided by 4 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV6: PCLK2 clock divided by 6 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV8: PCLK2 clock divided by 8 selected as ADC1 clock
+ */
+#define __HAL_RCC_GET_ADC1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_ADCPRE)))
+
+/** @brief Macro to configure the SDADCx clock (SDADCxCLK).
+ * @param __SDADCPrescaler__: specifies the SDADCx system clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_SDADCSYSCLK_DIV1: SYSCLK clock selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV2: SYSCLK clock divided by 2 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV4: SYSCLK clock divided by 4 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV6: SYSCLK clock divided by 6 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV8: SYSCLK clock divided by 8 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV10: SYSCLK clock divided by 10 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV12: SYSCLK clock divided by 12 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV14: SYSCLK clock divided by 14 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV16: SYSCLK clock divided by 16 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV20: SYSCLK clock divided by 20 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV24: SYSCLK clock divided by 24 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV28: SYSCLK clock divided by 28 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV32: SYSCLK clock divided by 32 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV36: SYSCLK clock divided by 36 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV40: SYSCLK clock divided by 40 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV44: SYSCLK clock divided by 44 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV48: SYSCLK clock divided by 48 selected as SDADCx clock
+ */
+#define __HAL_RCC_SDADC_CONFIG(__SDADCPrescaler__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SDADCPRE, (uint32_t)(__SDADCPrescaler__))
+
+/** @brief Macro to get the SDADCx clock prescaler.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SDADCSYSCLK_DIV1: SYSCLK clock selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV2: SYSCLK clock divided by 2 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV4: SYSCLK clock divided by 4 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV6: SYSCLK clock divided by 6 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV8: SYSCLK clock divided by 8 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV10: SYSCLK clock divided by 10 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV12: SYSCLK clock divided by 12 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV14: SYSCLK clock divided by 14 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV16: SYSCLK clock divided by 16 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV20: SYSCLK clock divided by 20 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV24: SYSCLK clock divided by 24 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV28: SYSCLK clock divided by 28 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV32: SYSCLK clock divided by 32 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV36: SYSCLK clock divided by 36 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV40: SYSCLK clock divided by 40 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV44: SYSCLK clock divided by 44 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV48: SYSCLK clock divided by 48 selected as SDADCx clock
+ */
+#define __HAL_RCC_GET_SDADC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SDADCPRE)))
+
+/** @brief Macro to configure the CEC clock.
+ * @param __CECCLKSource__: specifies the CEC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ */
+#define __HAL_RCC_CEC_CONFIG(__CECCLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_CECSW, (uint32_t)(__CECCLKSource__))
+
+/** @brief Macro to get the HDMI CEC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ */
+#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_CECSW)))
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302x8) || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F373xC)
+
+/** @brief Macro to configure the USB clock (USBCLK).
+ * @param __USBCLKSource__: specifies the USB clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USBPLLCLK_DIV1: PLL Clock divided by 1 selected as USB clock
+ * @arg RCC_USBPLLCLK_DIV1_5: PLL Clock divided by 1.5 selected as USB clock
+ */
+#define __HAL_RCC_USB_CONFIG(__USBCLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_USBPRE, (uint32_t)(__USBCLKSource__))
+
+/** @brief Macro to get the USB clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USBPLLCLK_DIV1: PLL Clock divided by 1 selected as USB clock
+ * @arg RCC_USBPLLCLK_DIV1_5: PLL Clock divided by 1.5 selected as USB clock
+ */
+#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_USBPRE)))
+
+#endif /* STM32F302x8 || STM32F302xC || STM32F303xC || STM32F373xC */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+
+/** @brief macro to configure the MCO clock.
+ * @param __MCOCLKSource__: specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCOSOURCE_HSI: HSI selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSE: HSE selected as MCO clock
+ * @arg RCC_MCOSOURCE_LSI: LSI selected as MCO clock
+ * @arg RCC_MCOSOURCE_LSE: LSE selected as MCO clock
+ * @arg RCC_MCOSOURCE_PLLCLK_DIV2: PLLCLK Divided by 2 selected as MCO clock
+ * @arg RCC_MCOSOURCE_SYSCLK: System Clock selected as MCO clock
+ * @param __MCODiv__: specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO_NODIV: No division applied on MCO clock source
+ */
+#define __HAL_RCC_MCO_CONFIG(__MCOCLKSource__, __MCODiv__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO | RCC_CFGR_MCOPRE), ((__MCOCLKSource__) | (__MCODiv__)))
+#else
+
+#define __HAL_RCC_MCO_CONFIG(__MCOCLKSource__, __MCODiv__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, (__MCOCLKSource__))
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/