Diff: main.cpp

Revision:

6:cb6b868465c3

Parent:

5:bf9591a365a4

Child:

7:fab201aa45b7

diff -r bf9591a365a4 -r cb6b868465c3 main.cpp
--- a/main.cpp	Wed Apr 26 18:45:43 2017 +0000
+++ b/main.cpp	Sat Sep 23 13:49:55 2017 +0000
@@ -8,19 +8,18 @@
 //*****************************************************************************
 //  COMANDO  MOVER MOTOR
 //  |POS 1|POS 2|POS 3|POS 4| POS 5|
-//  |  <  | #M  |  ,  | #°G |  >   |
+//  |  <  | #C  | a | b | c  | d |  >   |
 //
-// #M  -> indica el motor que se va a mover
-// #°G -> indica los grados a mover del  servomotor 
-// <,> -> inicio, separdor  y fin de comando 
+// #C -> indica el comando
+// a,b,c,d parametros del comando
+// <,> -> inicio,  y fin de comando 
 //  el inicio de comando no se almacena en el buffer
 //*****************************************************************************
 
 // VARIABLES PARA DEFINIR  EL  COMMANDO
 #define BUFF_SIZE 4
-#define COMM_NUM_MOTOR 0
-#define COMM_SEPARADOR 1
-#define COMM_GRADOS_MOTOR  2
+#define COMM_N 0
+#define INITPARAMETER  1
 
 
 uint8_t buffer_command[BUFF_SIZE]={0,0,0,0};
@@ -62,14 +61,12 @@
 
 uint8_t check_command()
 {
-       if (buffer_command[BUFF_SIZE-1]== '>' && buffer_command[COMM_SEPARADOR]==','){
+       if (buffer_command[BUFF_SIZE-1]== '>'){
         
             #if DEBUG
-                command.printf("\nMover Motor:");
-                print_bin2hex(buffer_command[COMM_NUM_MOTOR]);
+                command.printf("\nComando:");
+                print_bin2hex(buffer_command[COMM_N]);
                 command.printf(" -> ");
-                print_bin2hex(buffer_command[COMM_GRADOS_MOTOR]);
-                command.printf(" grados \n");  
             #endif
             return 1;
         }
@@ -81,12 +78,11 @@
         
      
 }
-void command_motor(uint8_t nm,uint8_t grados)
+void command_led(int tm)
 {
-    // aca se debe modificar el codigo del motor 
   //EJEMPLO DE COMANDO 
                 led=1;  
-                wait(1);
+                wait(tm);
                 led=0;   
                  
 }
@@ -102,8 +98,11 @@
         if (val== '<'){
             Read_command();
             if (check_command()){
-              command_motor(buffer_command[COMM_NUM_MOTOR],buffer_command[COMM_GRADOS_MOTOR]);
-            }
+                command_led(buffer_command[INITPARAMETER]);
+                #if DEBUG
+                 echo_command();
+                #endif
+        }
         }
         
     }