![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
n
Fork of LG by
Diff: InputOutput.h
- Revision:
- 0:8ad47e2b6f00
- Child:
- 1:f2adcae3d304
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/InputOutput.h Sat Jan 30 13:00:39 2016 +0000 @@ -0,0 +1,131 @@ + +#include "Global.h" + +#include "stdint.h" + +//******************************I2C************************************************* +#define I2C0 + +#define I2C_IDLE 1 +#define I2C_BUSY 0 + +#define I2CONSET_I2EN 0x0000040 /* I2C Control Set Register */ +#define I2CONSET_AA 0x0000004 +#define I2CONSET_SI 0x0000008 +#define I2CONSET_STO 0x0000010 +#define I2CONSET_STA 0x0000020 + +#define I2CONCLR_AAC 0x0000004 /* I2C Control clear Register */ +#define I2CONCLR_SIC 0x0000008 +#define I2CONCLR_STAC 0x0000020 +#define I2CONCLR_I2ENC 0x0000040 + +#define I2SCLH_SCLH 0x00000080 /* I2C SCL Duty Cycle High Reg */ +#define I2SCLL_SCLL 0x00000080 /* I2C SCL Duty Cycle Low Reg */ + +#define I2C_WRITELENGTH 0x00000006 /*Buffer length*/ +#define A_ADDRESS 0x0000005E /*address of slave potentiometer (table 6-2 of pot's manual)*/ +#define B_ADDRESS 0x0000005C /*address of slave potentiometer (table 6-2 of pot's manual)*/ +#define WRITE_CMD 0x00000000 /*address of wiper0 register in memory map*/ + +//********************************SPI************************************************ +#define HALFWORDS_FOR_ADCs 3 + +#define WRITE_DAC0 0x00000030 //write data to DAC 0 +#define WRITE_DAC1 0x00000031 //write data to DAC 1 + +#define DAC (1<<23) //DAC identifer +#define ADC (1<<16) //ADC identifer + +#define SetCS(a) LPC_GPIO0->FIOSET = a //set CS signal for ADC or DAC +#define ResetCS(a) LPC_GPIO0->FIOCLR = a //reset CS signal for ADC or DAC +#define SetDAC(a) LPC_GPIO0->FIOSET = a //set CS signal for ADC or DAC +#define ResetDAC(a) LPC_GPIO0->FIOCLR = a //reset CS signal for ADC or DAC + + + +#define SSPCR1_SSE 0x00000002 + +#define TX_SSP_EMPT 0x00000001 +#define RX_SSP_notEMPT 0x00000004 +#define TX_SSP_notFULL 0x00000002 +#define RX_SSP_FULL 0x00000008 +#define SSP_BUSY 0x00000010 + +#define ADC_ERR_MSK 0x00000001 +#define DAC_ERR_MSK 0x00000002 + +#define TIMEOUT 1000 + +typedef union { + int ArrayOut[31]; + struct { + int WP_reg; //e. PLC output voltage + int WP_sin; //r. ������ ������ ��� - ����� 250 �� + int WP_pll; //r. ����� XOR �� ������� ��� + int HF_reg; //e. HFO output voltage + + int HF_dif; + + int WP_Phase_Det_Array[8]; //e. arrays for "worms" output //r. ������� ��� ������ "���������" + int WP_sin_Array[8]; + int WP_scope1, WP_scope2; //e. temporary variables for Rate3 monitoring //r. ��������� ���������� ��� ���������� � Rate3 + + uint32_t F_ras; //e. really output frequency, divided by 16 (for transmission) + uint32_t L_Vibro; //e. period of oscillation of the dither drive //r. ������ ��������� ������������ + uint32_t T_Vibro; //e. pulse width of the dither drive //r. ������������ �������� ������������ + uint32_t T_VB_pll; //e. PD output of the frequency regulator of the dither drive //r. ����� �� ���������� ������� ������������ + + int PS_dif; + int BINS_dif; + int Cnt_Dif; + int Cnt_Pls; + int Cnt_Mns; + int Tmp_Out[6]; + + __int64 SF_dif; + + } Str; +} OUTPUT; + + +typedef union { + int ArrayIn[3]; + struct { + int Tmp_in[2]; + int HF_out; + int WP_sel; + } StrIn; +} INPUT; + + + +extern INPUT Input; +extern OUTPUT Output; + +void DAC_ADC_Exchange_Init(void); +void DAC_ADC_Exchange(void); +void ADC_Input(void); + +void clc_HFO(void); + +int clc_WP_sin(void); +void clc_PLC(void); +void init_PLC(void); + +void clc_Pulses(void); +void SOI_Init(void); + +void VibroDither_SwitchOn(void); +void VibroDither_SwitchOff(void); +void VibroDither_Set(void); +void DACInit(void); +void DAC_Output(int); +void clc_ThermoSensors(void); + +void Out_G_photo(unsigned, unsigned); +void G_Photo_Init( void ); +void G_Photo_Exchange(void); + +//endof file +