Revision 5:12ea15b9c2f4, committed 2013-10-03

Comitter:

Kojto

Date:

Thu Oct 03 21:26:22 2013 +0200

Parent:

4:b5875efcf0e5

Child:

6:6eaae34586b8

Commit message:

Initial version for new host driver

- not fully working

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/init.cpp	Thu Oct 03 21:26:22 2013 +0200
@@ -0,0 +1,70 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "main.h"
+#include "mbed.h"
+
+#if (MY_BOARD == WIGO)
+
+#include "NVIC_set_all_priorities.h"
+
+/**
+ *  \brief Wi-Go initialization
+ *  \param none
+ *  \return none
+ */
+void init() {
+    DigitalOut PWR_EN1(PTB2);
+    DigitalOut PWR_EN2(PTB3);
+
+    // Wi-Go set current to 500mA since we're turning on the Wi-Fi
+    PWR_EN1 = 0;
+    PWR_EN2 = 1;
+
+    NVIC_set_all_irq_priorities(3);
+    NVIC_SetPriority(SPI0_IRQn, 0x0);     // Wi-Fi SPI interrupt must be higher priority than SysTick
+    NVIC_SetPriority(PORTA_IRQn, 0x1);
+    NVIC_SetPriority(SysTick_IRQn, 0x2);  // SysTick set to lower priority than Wi-Fi SPI bus interrupt
+    PORTA->PCR[16] |=PORT_PCR_ISF_MASK;
+    PORTA->ISFR |= (1 << 16);
+}
+
+#elif (MY_BOARD == WIFI_DIPCORTEX)
+
+/**
+ *  \brief Wifi DipCortex initialization
+ *  \param none
+ *  \return none
+ */
+void init() {
+    NVIC_SetPriority(SSP1_IRQn, 0x0);
+    NVIC_SetPriority(PIN_INT0_IRQn, 0x1);
+
+    // SysTick set to lower priority than Wi-Fi SPI bus interrupt
+    NVIC_SetPriority(SysTick_IRQn, 0x2);
+}
+
+#else
+
+/**
+ *  \brief Place here init routine for your board
+ *  \param none
+ *  \return none
+ */
+void init() {
+
+}
+
+#endif

--- a/main.cpp	Thu Oct 03 16:56:32 2013 +0000
+++ b/main.cpp	Thu Oct 03 21:26:22 2013 +0200
@@ -15,79 +15,101 @@
  */
 #include "mbed.h"
 #include "cc3000.h"
-#include "tcp_ip_demo.h"
 #include "main.h"
+#include "TCPSocketConnection.h"
+#include "TCPSocketServer.h"
 
 using namespace mbed_cc3000;
 
-#if (WIGO_BOARD)
-// Wi-Go battery charger control
-DigitalOut PWR_EN1(PTB2);
-DigitalOut PWR_EN2(PTB3);
-// Wi-go LED
-DigitalOut ledr (LED_RED);
-DigitalOut ledg (LED_GREEN);
-DigitalOut ledb (LED_BLUE);
-DigitalOut led1 (PTB8);
-DigitalOut led2 (PTB9);
-DigitalOut led3 (PTB10);
+tUserFS user_info;
+
+/* cc3000 module declaration specific for user's board. Check also init() */
+#if (MY_BOARD == WIGO)
+cc3000 wifi(PTA16, PTA13, PTD0, SPI(PTD2, PTD3, PTC5), PORTA_IRQn);
+Serial pc(USBTX, USBRX);
+#elif (MY_BOARD == WIFI_DIPCORTEX)
+cc3000 wifi(p28, p27, p30, SPI(p21, p14, p37), PIN_INT0_IRQn);
+Serial pc(UART_TX, UART_RX);
+#else
+
 #endif
 
-Serial pc(USBTX, USBRX);
-cc3000 wigo(PTA16, PTA13, PTD0, SPI(PTD2, PTD3, PTC5), PORTA_IRQn);
+#ifndef CC3000_UNENCRYPTED_SMART_CONFIG
+  const uint8_t smartconfigkey[] = {0x73,0x6d,0x61,0x72,0x74,0x63,0x6f,0x6e,0x66,0x69,0x67,0x41,0x45,0x53,0x31,0x36};
+#else
+  const uint8_t smartconfigkey = 0;
+#endif
 
-/** Initialize LED (only for Wi-go board)
- *  \param  none
- *  \return none
- */
-void initLEDs(void)
-{
-    RED_OFF;
-    GREEN_OFF;
-    BLUE_OFF;
-    LED_D1_OFF;
-    LED_D2_OFF;
-    LED_D3_OFF;
-}
-
-/** Print cc3000 information
- *  \param  none
+/**
+ *  \brief Print cc3000 information
+ *  \param none
  *  \return none
  */
 void print_cc3000_info() {
-    wigo.get_user_file_info((uint8_t *)&userFS, sizeof(userFS));
-    wigo.get_mac_address(myMAC);
-    printf("\n\nWi-Go MAC address %02x:%02x:%02x:%02x:%02x:%02x\n\n", myMAC[0], myMAC[1], myMAC[2], myMAC[3], myMAC[4], myMAC[5]);
+    uint8_t myMAC[8];
 
-    printf("FTC        %i\n",userFS.FTC);
-    printf("PP_version %i.%i\n",userFS.PP_version[0], userFS.PP_version[1]);
-    printf("SERV_PACK  %i.%i\n",userFS.SERV_PACK[0], userFS.SERV_PACK[1]);
-    printf("DRV_VER    %i.%i.%i\n",userFS.DRV_VER[0], userFS.DRV_VER[1], userFS.DRV_VER[2]);
-    printf("FW_VER     %i.%i.%i\n",userFS.FW_VER[0], userFS.FW_VER[1], userFS.FW_VER[2]);
+    printf("MAC address + cc3000 info \r\n");
+    wifi.get_user_file_info((uint8_t *)&user_info, sizeof(user_info));
+    wifi.get_mac_address(myMAC);
+    printf(" MAC address %02x:%02x:%02x:%02x:%02x:%02x \r\n \r\n", myMAC[0], myMAC[1], myMAC[2], myMAC[3], myMAC[4], myMAC[5]);
+
+    printf(" FTC        %i \r\n",user_info.FTC);
+    printf(" PP_version %i.%i \r\n",user_info.PP_version[0], user_info.PP_version[1]);
+    printf(" SERV_PACK  %i.%i \r\n",user_info.SERV_PACK[0], user_info.SERV_PACK[1]);
+    printf(" DRV_VER    %i.%i.%i \r\n",user_info.DRV_VER[0], user_info.DRV_VER[1], user_info.DRV_VER[2]);
+    printf(" FW_VER     %i.%i.%i \r\n",user_info.FW_VER[0], user_info.FW_VER[1], user_info.FW_VER[2]);
 }
 
-/** Connect to SSID with security
- *  \param  ssid     Name of SSID
- *  \param  key      Password
- *  \param  sec_mode Security mode
+/**
+ *  \brief Connect to SSID with a timeout
+ *  \param ssid     Name of SSID
+ *  \param key      Password
+ *  \param sec_mode Security mode
  *  \return none
  */
-void connect_to_ssid(uint8_t *ssid, uint8_t *key, uint8_t sec_mode) {
+void connect_to_ssid(char *ssid, char *key, unsigned char sec_mode) {
     printf("Connecting to SSID: %s. Timeout is 10s.\n",ssid);
-    if (wigo.connect_to_AP(ssid, key, sec_mode) == true) {
-        printf("Connected\n");
+    if (wifi.connect_to_AP((uint8_t *)ssid, (uint8_t *)key, sec_mode) == true) {
+        printf(" Connected\n");
     } else {
-        printf("Connection timed-out (error). Please restart.\n");
+        printf(" Connection timed-out (error). Please restart.\n");
         while(1);
   }
 }
 
-/** Connect to SSID without security
- *  \param  ssid Name of SSID
+/**
+ *  \brief Connect to SSID without security
+ *  \param ssid Name of SSID
+ *  \return none
+ */
+void connect_to_ssid(char *ssid) {
+    wifi.connect_open((uint8_t *)ssid);
+}
+
+/**
+ *  \brief First time configuration
+ *  \param none
  *  \return none
  */
-void connect_to_ssid(uint8_t *ssid) {
-    wigo.connect_open(ssid);
+void do_FTC(void) {
+    printf("Running First Time Configuration \r\n");
+    wifi.start_smart_config(smartconfigkey);
+    while (wifi.is_dhcp_configured() == false) {
+         wait_ms(500);
+         printf("Waiting for dhcp to be set. \r\n");
+    }
+    user_info.FTC = 1;
+    wifi.set_user_file_info((uint8_t *)&user_info, sizeof(user_info));
+    wifi._wlan.stop();
+    printf("FTC finished.\n");
+}
+
+/** Start smart config
+ *  \param  none
+ *  \return none
+ */
+void start_smart_config() {
+    wifi.start_smart_config(smartconfigkey);
 }
 
 /** Main function
@@ -95,68 +117,83 @@
  *  \return int
  */
 int main() {
-    // Wi-Go set current to 500mA since we're turning on the Wi-Fi
-    SET_PWR_EN1;
-    SET_PWR_EN2;
-
+    init(); /* board dependent init */
     pc.baud(115200);
 
-    /* KL25 specific code */
-    NVIC_SetAllPriority(3);
-    NVIC_SetPriority(SPI0_IRQn, 0x0);     // Wi-Fi SPI interrupt must be higher priority than SysTick
-    NVIC_SetPriority(PORTA_IRQn, 0x1);
-    NVIC_SetPriority(SysTick_IRQn, 0x2);  // SysTick set to lower priority than Wi-Fi SPI bus interrupt
-
-    CLEAR_PCR_INTERRUPT;
-    CLEAN_PORT_INTERRUPT;
-
-    GREEN_ON;
-    wigo.start(0);
-    printf("CC3000 Python demo.\n");
+    wifi.start(0);
+    printf("cc3000 Simple socket demo. \r\n");
     print_cc3000_info();
 
-    printf("\n<0> Normal run. SmartConfig will\n    start if no valid connection exists.\n");
-    printf("<1> Connect using fixed SSID : %s\n", SSID);
-    printf("<2> SmartConfig.\n");
+    printf("\n<0> Normal run. SmartConfig will \r\n    start if no valid connection exists. \r\n");
+    printf("<1> Connect using fixed SSID : %s \r\n", SSID);
+    printf("<2> SmartConfig. \r\n");
 
     signed char c = getchar();
     switch (c)
     {
         case '0':
-            if(!userFS.FTC)
+            if(!user_info.FTC)
             {
                 do_FTC();
-                wigo._wlan.stop();
+                wifi._wlan.stop();
             }
             break;
         case '1':
-            printf("Attempting SSID Connection\n");
+            printf("Attempting SSID Connection. \r\n");
 #ifndef CC3000_TINY_DRIVER
     #ifdef AP_KEY
-            connect_to_ssid((uint8_t *)SSID,(uint8_t *)AP_KEY,AP_SECURITY); /* TODO rewrite to const vraiables - NOT MACROS */
+            connect_to_ssid(SSID, AP_KEY, AP_SECURITY); /* TODO rewrite to const vraiables - NOT MACROS */
     #else
-            connect_to_ssid((uint8_t *)SSID);
+            connect_to_ssid(SSID);
     #endif
 #else
-            connect_to_ssid((uint8_t *)SSID);
+            connect_to_ssid(SSID);
 #endif
             break;
         case '2':
-            printf("Starting Smart Config configuration.\n");
+            printf("Starting Smart Config configuration. \r\n");
             start_smart_config();
-            init_dhcp();
+            while (wifi.is_dhcp_configured() == false)
+            {
+                wait_ms(500);
+                printf("Waiting for dhcp to be set. \r\n");
+            }
 
-            printf("Press the reset button on your board and select 0...\n");
+            printf("Press the reset button on your board and select 0... \r\n");
             while(1);
         default:
-            printf("Wrong selection.\n");
-            printf("Reset the board and try again.\n");
+            printf("Wrong selection. \r\n");
+            printf("Reset the board and try again. \r\n");
             break;
     }
-    SmartConfigProfilestored = SMART_CONFIG_SET;
-    RED_OFF;
-    GREEN_OFF;
-    BLUE_OFF;
+
+    printf("DHCP request \r\n");
+    while (wifi.is_dhcp_configured() == false) {
+         wait_ms(500);
+         printf("  Waiting for dhcp to be set. \r\n");
+    }
+
+    tNetappIpconfigRetArgs ipinfo2;
+    wifi.get_ip_config(&ipinfo2); // data is returned in the ipinfo2 structure
+    printf("DHCP assigned IP Address = %d.%d.%d.%d \r\n", ipinfo2.aucIP[3], ipinfo2.aucIP[2], ipinfo2.aucIP[1], ipinfo2.aucIP[0]);
+
+    char python_msg[] = "Hello Python\n";
+    TCPSocketServer server;
 
-    run_tcp_server();    // Run TCP/IP Connection to host
+    server.bind(15000);
+    server.listen();
+    while (1) {
+        TCPSocketConnection client;
+        int32_t status = server.accept(client);
+        if (status >= 0) {
+            client.set_blocking(false, 1500); // Timeout after (1.5)s
+            printf("Connection from: %s \r\n", client.get_address());
+            char buffer[256];
+            client.receive(buffer, sizeof(buffer));
+            printf("Received: %s \r\n",buffer);
+            printf("Sending the message to the server. \r\n");
+            client.send_all(python_msg, sizeof(python_msg));
+            client.close();
+        }
+    }
 }

--- a/main.h	Thu Oct 03 16:56:32 2013 +0000
+++ b/main.h	Thu Oct 03 21:26:22 2013 +0200
@@ -16,77 +16,41 @@
 #ifndef MAIN_H
 #define MAIN_H
 
-#define WIGO_BOARD 1
-
-#if (WIGO_BOARD == 1)
+#define WIGO           1
+#define WIFI_DIPCORTEX 2
+#define UNDEFINED      3
 
-extern DigitalOut ledr;
-extern DigitalOut ledg;
-extern DigitalOut ledb;
-extern DigitalOut led1;
-extern DigitalOut led2;
-extern DigitalOut led3;
+#define MY_BOARD WIGO
 
-#define RED_OFF        ledr = 1;
-#define RED_ON         ledr = 0;
-#define RED_TOGGLE     ledr = !ledr;
-#define GREEN_OFF      ledg = 1;
-#define GREEN_ON       ledg = 0;
-#define GREEN_TOGGLE   ledg = !ledg;
-#define BLUE_OFF       ledb = 1;
-#define BLUE_ON        ledb = 0;
-#define BLUE_TOGGLE    ledb = !ledb;
-#define LED_D1_OFF     led1 = 1;
-#define LED_D1_ON      led1 = 0;
-#define LED_D1_TOGGLE  led1 = !led1;
-#define LED_D2_OFF     led2 = 1;
-#define LED_D2_ON      led2 = 0;
-#define LED_D2_TOGGLE  led2 = !led2;
-#define LED_D3_OFF     led3 = 1;
-#define LED_D3_ON      led3 = 0;
-#define LED_D3_TOGGLE  led3 = !led3;
+// use this defines in AP_SECURITY
+#define NONE 0
+#define WEP  1
+#define WPA  2
+#define WPA2 3
 
-#define SET_PWR_EN1    PWR_EN1 = 0
-#define SET_PWR_EN2    PWR_EN2 = 1
+// use smart config
+#define USE_SMART_CONFIG 0
 
-#define WLAN_ISF_PCR        PORTA->PCR[16]
-#define WLAN_ISF_ISFR       PORTA->ISFR
-#define WLAN_ISF_MASK       (1<<16)
+ // Default SSID Settings
+#define AP_KEY       "zxcvbnm,./"
+#define AP_SECURITY  WPA2            // WPA2 must be enabled for use with iPhone or Android phone hotspot!
+#define SSID         "SSID"
 
-#define CLEAR_PCR_INTERRUPT    WLAN_ISF_PCR|=PORT_PCR_ISF_MASK;
-#define CLEAN_PORT_INTERRUPT    WLAN_ISF_ISFR|=WLAN_ISF_MASK;
-
-#else
-
-#define CLEAR_PCR_INTERRUPT
-#define CLEAN_PORT_INTERRUPT
+#define USE_DHCP      1
+#define USE_STATIC_IP 2
 
-#define RED_OFF
-#define RED_ON
-#define RED_TOGGLE
-#define GREEN_OFF
-#define GREEN_ON
-#define GREEN_TOGGLE
-#define BLUE_OFF
-#define BLUE_ON
-#define BLUE_TOGGLE
-#define LED_D1_OFF
-#define LED_D1_ON
-#define LED_D1_TOGGLE
-#define LED_D2_OFF
-#define LED_D2_ON
-#define LED_D2_TOGGLE
-#define LED_D3_OFF
-#define LED_D3_ON
-#define LED_D3_TOGGLE
+// Modify the following settings as necessary for your Wi-Fi Network setup:
+#define IP_ALLOC_METHOD USE_DHCP        // for DHCP assigned IP address
+//#define IP_ALLOC_METHOD USE_STATIC_IP // for static IP address
 
-#define SET_PWR_EN1
-#define SET_PWR_EN2
+#define STATIC_IP_OCT1 192
+#define STATIC_IP_OCT2 168
+#define STATIC_IP_OCT3 0
+#define STATIC_IP_OCT4 103
 
-#define WLAN_ISF_PCR
-#define WLAN_ISF_ISFR
-#define WLAN_ISF_MASK
+#define STATIC_GW_OCT4 1             // Static Gateway address  = STATIC_IP_OCT1.STATIC_IP_OCT2.STATIC_IP_OCT3.STATIC_GW_OCT4
+
+
+void init();
 
 #endif
-
-#endif

--- a/tcp_ip_demo.cpp	Thu Oct 03 16:56:32 2013 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,210 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "tcp_ip_demo.h"
-#include "cc3000.h"
-#include "main.h"
-
-using namespace mbed_cc3000;
-
-extern cc3000 wigo;
-
-uint8_t ConnectUsingSmartConfig;
-uint8_t myMAC[8];
-tUserFS userFS;
-
-uint8_t SmartConfigProfilestored = 0xff;
-
-#ifndef CC3000_UNENCRYPTED_SMART_CONFIG
-  const uint8_t smartconfigkey[] = {0x73,0x6d,0x61,0x72,0x74,0x63,0x6f,0x6e,0x66,0x69,0x67,0x41,0x45,0x53,0x31,0x36};
-#else
-  const uint8_t smartconfigkey = 0;
-#endif
-
-/* Device name - used for Smart config in order to stop the Smart phone configuration process */
-static uint8_t DevServname[] = "CC3000";
-static int8_t requestBuffer[REQ_BUFFER_SIZE];
-
-/** Start tcp server
- *  \param  port Port for server
- *  \return none
- */
-void create_tcp_connection(int32_t port) {
-  const char python_msg[] = "Hello Python\n";
-  int32_t stat;
-  cc3000_server server = wigo.create_tcp_server(0, 15000);
-
-  server.bind();
-  server.listen(1); /* backlog = 1 */
-  while (1) {
-    stat = server.accept();
-    printf("Connected\n");
-    if (stat >= 0) {
-     server.receive(requestBuffer,20,0);
-     printf("Input = %s\n", requestBuffer);
-     stat = server.send((void *)python_msg, strlen(python_msg), 0);
-     printf("status= %d\n", stat);
-    } else {
-        printf("ERROR %d", stat);
-        switch (stat) {
-            case -1:
-                printf(": remote socket closed.\n");
-                break;
-            case -2:
-                printf(": no buffers available.\n");
-                break;
-            case -57:
-                printf(": timeout - no reply from remote.\n");
-                break;
-            default:
-                printf("\n");
-        }
-    }
-    server.close();
-    printf("Done, press any key to repeat\n");
-    getchar();
-  }
-}
-
-/** Start smart config
- *  \param  none
- *  \return none
- */
-void start_smart_config() {
-    wigo.start_smart_config(smartconfigkey);
-}
-
-/** Initialize
- *  \param  none
- *  \return none
- */
-void init_dhcp(void)
-{
-    int32_t t;
-    tNetappIpconfigRetArgs ipinfo2;
-
-    //dynamic dhcp is set by default
-#if IP_ALLOC_METHOD == USE_STATIC_IP
-    set_static_dhcp();
-#endif
-    check_dhcp();
-
-  // If we're not blocked by accept or others, obtain the latest status
-    wigo.get_ip_config(&ipinfo2);                  // data is returned in the ipinfo2 structure
-    printf("\n*** Wi-Go board DHCP assigned IP Address = %d.%d.%d.%d\n", ipinfo2.aucIP[3], ipinfo2.aucIP[2], ipinfo2.aucIP[1], ipinfo2.aucIP[0]);
-
-    t = wigo._socket.mdnsAdvertiser(1, DevServname, sizeof(DevServname));
-    printf("mDNS Status= %x\n", t);
-}
-
-/** Waits for dhcp to be set
- *  \param  none
- *  \return none
- */
-void check_dhcp(void)
-{
-    int32_t t;
-
-    while (wigo.is_dhcp_configured() == false)
-    {
-         wait_ms(500);
-         printf("Waiting for dhcp to be set.\n");
-    }
-
-    t = wigo._socket.mdnsAdvertiser(1, DevServname, sizeof(DevServname));
-    printf("mDNS Status= %x\n", t);
-}
-
-/** Sets static DHCP (auto dhpc by default)
- *  \param  none
- *  \return none
- */
-void set_static_dhcp(void)
-{
-    uint8_t pucIP_Addr[4];
-    uint8_t pucIP_DefaultGWAddr[4];
-    uint8_t pucSubnetMask[4];
-    uint8_t pucDNS[4];
-
-    // Subnet mask is assumed to be 255.255.255.0
-    pucSubnetMask[0] = 0xFF;
-    pucSubnetMask[1] = 0xFF;
-    pucSubnetMask[2] = 0xFF;
-    pucSubnetMask[3] = 0x0;
-
-    // CC3000's IP
-    pucIP_Addr[0] = STATIC_IP_OCT1;
-    pucIP_Addr[1] = STATIC_IP_OCT2;
-    pucIP_Addr[2] = STATIC_IP_OCT3;
-    pucIP_Addr[3] = STATIC_IP_OCT4;
-
-    // Default Gateway/Router IP
-    // 192.168.1.1
-    pucIP_DefaultGWAddr[0] = STATIC_IP_OCT1;
-    pucIP_DefaultGWAddr[1] = STATIC_IP_OCT2;
-    pucIP_DefaultGWAddr[2] = STATIC_IP_OCT3;
-    pucIP_DefaultGWAddr[3] = STATIC_GW_OCT4;
-
-    // We assume the router is also a DNS server
-    pucDNS[0] = STATIC_IP_OCT1;
-    pucDNS[1] = STATIC_IP_OCT2;
-    pucDNS[2] = STATIC_IP_OCT3;
-    pucDNS[3] = STATIC_GW_OCT4;
-
-    wigo._netapp.dhcp((uint32_t *)pucIP_Addr,
-                (uint32_t *)pucSubnetMask,
-                (uint32_t *)pucIP_DefaultGWAddr,
-                (uint32_t *)pucDNS);
-
-    // reset the CC3000 to apply Static Setting
-    wigo._wlan.stop();
-    wait(1);
-    wigo._wlan.start(0);
-
-    // Mask out all non-required events from CC3000
-    wigo._wlan.set_event_mask(HCI_EVNT_WLAN_KEEPALIVE|
-                        HCI_EVNT_WLAN_UNSOL_INIT|
-                        HCI_EVNT_WLAN_ASYNC_PING_REPORT);
-}
-
-/** Executes functions for tcp/ip server
- *  \param  none
- *  \return none
- */
-void run_tcp_server(void)
-{
-    init_dhcp();
-    printf("\n\nStarting TCP/IP Server\n");
-    create_tcp_connection(TCPIP_PORT);
-}
-
-/** First time configuration
- *  \param  none
- *  \return none
- */
-void do_FTC(void)
-{
-    printf("Running First Time Configuration\n");
-    start_smart_config();
-    init_dhcp();
-    userFS.FTC = 1;
-    wigo.set_user_file_info((uint8_t *)&userFS, sizeof(userFS));
-    SmartConfigProfilestored = SMART_CONFIG_SET;
-    wigo._wlan.stop();
-    printf("FTC finished.\n");
-}
-
-
-

--- a/tcp_ip_demo.h	Thu Oct 03 16:56:32 2013 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,61 +0,0 @@
-#ifndef DOTCPIP_H
-#define DOTCPIP_H
-
-#include "cc3000.h"
-
-/** TCP/IP Functions
-*
-*/
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#define SMART_CONFIG_SET 0x55
-#define TCPIP_PORT 15000
-
-#define USE_DHCP      1
-#define USE_STATIC_IP 2
-
-#define NONE 0
-#define WEP  1
-#define WPA  2
-#define WPA2 3
-
-// Modify the following settings as necessary for your Wi-Fi Network setup:
-#define IP_ALLOC_METHOD USE_DHCP        // for DHCP assigned IP address
-//#define IP_ALLOC_METHOD USE_STATIC_IP // for static IP address
-
-// Default SSID Settings
-#define AP_KEY       "87654321"
-#define AP_SECURITY     WPA2            // WPA2 must be enabled for use with iPhone or Android phone hotspot!
-#define SSID           "test"
-//#define AP_SECURITY    NONE          // no security but will connect quicker!
-#define STATIC_IP_OCT1 192
-#define STATIC_IP_OCT2 168
-#define STATIC_IP_OCT3 0
-#define STATIC_IP_OCT4 103
-
-#define STATIC_GW_OCT4 1             // Static Gateway address  = STATIC_IP_OCT1.STATIC_IP_OCT2.STATIC_IP_OCT3.STATIC_GW_OCT4
-
-#define REQ_BUFFER_SIZE 400
-
-
-extern mbed_cc3000::tUserFS userFS;
-
-extern uint8_t myMAC[8];
-extern uint8_t SmartConfigProfilestored;
-
-
-void check_dhcp(void);
-void start_smart_config(void);
-void create_tcp_connection(int32_t port);
-void init_dhcp(void);
-void run_tcp_server(void);
-void do_FTC(void);
-void set_dhcp(void);
-
-#endif // DOTCPIP_H