![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Program to satellite, send variables of temperature, pressure, RH, GPS
Dependencies: mbed nRF24L01P BMP180 DHT11 GPS
Sensores.cpp
- Committer:
- JorgeGtz
- Date:
- 2019-11-29
- Revision:
- 0:e8e530360fe5
File content as of revision 0:e8e530360fe5:
#include "Sensores.h" #include "mbed.h" #include "Dht11.h" #include "BMP180.h" #include "GPS.h" #include "nRF24L01P.h" Serial BT(Rx,Tx); Dht11 sensor(SENSOR); I2C i2c(SDA, SCL); //SDA,SCL BMP180 bmp180(&i2c); GPS ark(ARK_Rx, ARK_Tx); DigitalOut myled(LED); Ticker mTicker; nRF24L01P my_nrf24l01p(MOSI, MISO, SCK, CSN, CE, IRQ); // mosi, miso, sck, csn, ce, irq int Temperatura,Humedad, Presion, Altura, Lat, Long; float Longitud, Latitud, temp; long UTC,muestreo_sensores=0;; char hora,minuto,segundo; int count=0; int count_enviar=0; char tab_control[TRANSFER_SIZE]={'T','H','P','A','L','D','U'}; char valor[TRANSFER_SIZE]; int variables[7]; void ticker_callback(){ count++; muestreo_sensores++; count_enviar++; if(count>10){ // Temperatura=sensor.getFahrenheit(); if( ark.sample() == 1) { // myled=0; Latitud=ark.latitude; Longitud=ark.longitude; UTC=ark.utc+50000; Altura=ark.alt; } // else myled=1; count=0; } if(muestreo_sensores>200) { sensor.read(); Humedad=sensor.getHumidity(); muestreo_sensores=0; } if(count_enviar>5) { enviar_datos(); myled=!myled; count_enviar=0; } } //////////////////////////////////////////////////////////////////////////////// void init_serial(void){ BT.baud(115200); } void init_transmisor(void){ my_nrf24l01p.powerUp(); my_nrf24l01p.setTransferSize( TRANSFER_SIZE ); my_nrf24l01p.setTransmitMode(); my_nrf24l01p.enable(); } void init_sensores(void){ mTicker.attach_us(&ticker_callback,10000); //(funtion(),tiempo de interrupcion(seg)) bmp180.init(); } void actualizar(void){ bmp180.startTemperature(); wait_ms(5); if(bmp180.getTemperature(&temp) != 0) { // BT.printf("Error getting temperature\n"); } bmp180.startPressure(BMP180::ULTRA_LOW_POWER); wait_ms(10); // Wait for conversion to complete if(bmp180.getPressure(&Presion) != 0) { // BT.printf("Error getting pressure\n"); } } void enviar_datos(void){ presion(); sensor_dht11(); global(); transmitir(); } ////////////////////////////////////////////////////////////////////////////////Enviar data void presion(void){ Temperatura=temp*100; variables[0]=Temperatura; variables[2]=Presion; /* sprintf(valor,"T%06d",Temperatura); BT.printf(valor); BT.printf("\n");*/ } void sensor_dht11(void){ variables[1]=Humedad; } void global(void){ Lat=Latitud*1000; Long=Longitud*100; variables[3]=Altura; variables[4]=Lat; variables[5]=Long; variables[6]=UTC; } //////////////////////////////////////////////////////////////////////////////// void transmitir(void){ for(int i=0; i<=6; i++){ sprintf(valor,"%c%6d",tab_control[i],variables[i]); // If the transmit buffer is full if ( TRANSFER_SIZE >= sizeof( valor) ) { BT.printf("Sending Message... "); // Send the transmitbuffer via the nRF24L01+ my_nrf24l01p.write( NRF24L01P_PIPE_P0,valor, TRANSFER_SIZE ); BT.printf("Message Sent\n"); } } }