Diff: source/nRF5xGattClient.h

Revision:

389:5982ee136c47

Parent:

388:db85a09c27ef

Child:

390:d9f7f0134e24

--- a/source/nRF5xGattClient.h	Tue Jul 21 13:23:44 2015 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,157 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __NRF51822_GATT_CLIENT_H__
-#define __NRF51822_GATT_CLIENT_H__
-
-#include "ble/GattClient.h"
-#include "nRF5xServiceDiscovery.h"
-
-class nRF5xGattClient : public GattClient
-{
-public:
-    static nRF5xGattClient &getInstance();
-
-    /**
-     * Launch service discovery. Once launched, service discovery will remain
-     * active with callbacks being issued back into the application for matching
-     * services/characteristics. isActive() can be used to determine status; and
-     * a termination callback (if setup) will be invoked at the end. Service
-     * discovery can be terminated prematurely if needed using terminate().
-     *
-     * @param  connectionHandle
-     *           Handle for the connection with the peer.
-     * @param  sc
-     *           This is the application callback for matching service. Taken as
-     *           NULL by default. Note: service discovery may still be active
-     *           when this callback is issued; calling asynchronous BLE-stack
-     *           APIs from within this application callback might cause the
-     *           stack to abort service discovery. If this becomes an issue, it
-     *           may be better to make local copy of the discoveredService and
-     *           wait for service discovery to terminate before operating on the
-     *           service.
-     * @param  cc
-     *           This is the application callback for matching characteristic.
-     *           Taken as NULL by default. Note: service discovery may still be
-     *           active when this callback is issued; calling asynchronous
-     *           BLE-stack APIs from within this application callback might cause
-     *           the stack to abort service discovery. If this becomes an issue,
-     *           it may be better to make local copy of the discoveredCharacteristic
-     *           and wait for service discovery to terminate before operating on the
-     *           characteristic.
-     * @param  matchingServiceUUID
-     *           UUID based filter for specifying a service in which the application is
-     *           interested. By default it is set as the wildcard UUID_UNKNOWN,
-     *           in which case it matches all services. If characteristic-UUID
-     *           filter (below) is set to the wildcard value, then a service
-     *           callback will be invoked for the matching service (or for every
-     *           service if the service filter is a wildcard).
-     * @param  matchingCharacteristicUUIDIn
-     *           UUID based filter for specifying characteristic in which the application
-     *           is interested. By default it is set as the wildcard UUID_UKNOWN
-     *           to match against any characteristic. If both service-UUID
-     *           filter and characteristic-UUID filter are used with non- wildcard
-     *           values, then only a single characteristic callback is
-     *           invoked for the matching characteristic.
-     *
-     * @Note     Using wildcard values for both service-UUID and characteristic-
-     *           UUID will result in complete service discovery--callbacks being
-     *           called for every service and characteristic.
-     *
-     * @return
-     *           BLE_ERROR_NONE if service discovery is launched successfully; else an appropriate error.
-     */
-    virtual ble_error_t launchServiceDiscovery(Gap::Handle_t                               connectionHandle,
-                                               ServiceDiscovery::ServiceCallback_t         sc = NULL,
-                                               ServiceDiscovery::CharacteristicCallback_t  cc = NULL,
-                                               const UUID                                 &matchingServiceUUID = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN),
-                                               const UUID                                 &matchingCharacteristicUUIDIn = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN));
-
-    virtual void onServiceDiscoveryTermination(ServiceDiscovery::TerminationCallback_t callback) {
-        discovery.onTermination(callback);
-    }
-
-    /**
-     * Is service-discovery currently active?
-     */
-    virtual bool isServiceDiscoveryActive(void) const {
-        return discovery.isActive();
-    }
-
-    /**
-     * Terminate an ongoing service-discovery. This should result in an
-     * invocation of the TerminationCallback if service-discovery is active.
-     */
-    virtual void terminateServiceDiscovery(void) {
-        discovery.terminate();
-    }
-
-    virtual ble_error_t read(Gap::Handle_t connHandle, GattAttribute::Handle_t attributeHandle, uint16_t offset) const {
-        uint32_t rc = sd_ble_gattc_read(connHandle, attributeHandle, offset);
-        if (rc == NRF_SUCCESS) {
-            return BLE_ERROR_NONE;
-        }
-        switch (rc) {
-            case NRF_ERROR_BUSY:
-                return BLE_STACK_BUSY;
-            case BLE_ERROR_INVALID_CONN_HANDLE:
-            case NRF_ERROR_INVALID_STATE:
-            case NRF_ERROR_INVALID_ADDR:
-            default:
-                return BLE_ERROR_INVALID_STATE;
-        }
-    }
-
-    virtual ble_error_t write(GattClient::WriteOp_t cmd, Gap::Handle_t connHandle, GattAttribute::Handle_t attributeHandle, size_t length, const uint8_t *value) const {
-        ble_gattc_write_params_t writeParams = { };
-        writeParams.write_op = cmd;
-        writeParams.handle   = attributeHandle;
-        writeParams.len      = length;
-        writeParams.p_value  = const_cast<uint8_t *>(value);
-
-        uint32_t rc = sd_ble_gattc_write(connHandle, &writeParams);
-        if (rc == NRF_SUCCESS) {
-            return BLE_ERROR_NONE;
-        }
-        switch (rc) {
-            case NRF_ERROR_BUSY:
-                return BLE_STACK_BUSY;
-            case BLE_ERROR_NO_TX_BUFFERS:
-                return BLE_ERROR_NO_MEM;
-            case BLE_ERROR_INVALID_CONN_HANDLE:
-            case NRF_ERROR_INVALID_STATE:
-            case NRF_ERROR_INVALID_ADDR:
-            default:
-                return BLE_ERROR_INVALID_STATE;
-        }
-    }
-
-public:
-    nRF5xGattClient() : discovery(this) {
-        /* empty */
-    }
-
-    friend void bleGattcEventHandler(const ble_evt_t *p_ble_evt);
-
-private:
-    nRF5xGattClient(const nRF5xGattClient &);
-    const nRF5xGattClient& operator=(const nRF5xGattClient &);
-
-private:
-    nRF5xServiceDiscovery discovery;
-};
-
-#endif // ifndef __NRF51822_GATT_CLIENT_H__
\ No newline at end of file