added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
Diff: targets/hal/TARGET_Freescale/TARGET_KSDK2_MCUS/TARGET_KL43Z/drivers/fsl_uart_dma.c
- Revision:
- 144:ef7eb2e8f9f7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_Freescale/TARGET_KSDK2_MCUS/TARGET_KL43Z/drivers/fsl_uart_dma.c Fri Sep 02 15:07:44 2016 +0100 @@ -0,0 +1,365 @@ +/* + * Copyright (c) 2015, Freescale Semiconductor, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of Freescale Semiconductor, Inc. nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "fsl_uart_dma.h" +#include "fsl_dmamux.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/* Array of UART handle. */ +#if (defined(UART5)) +#define UART_HANDLE_ARRAY_SIZE 6 +#else /* UART5 */ +#if (defined(UART4)) +#define UART_HANDLE_ARRAY_SIZE 5 +#else /* UART4 */ +#if (defined(UART3)) +#define UART_HANDLE_ARRAY_SIZE 4 +#else /* UART3 */ +#if (defined(UART2)) +#define UART_HANDLE_ARRAY_SIZE 3 +#else /* UART2 */ +#if (defined(UART1)) +#define UART_HANDLE_ARRAY_SIZE 2 +#else /* UART1 */ +#if (defined(UART0)) +#define UART_HANDLE_ARRAY_SIZE 1 +#else /* UART0 */ +#error No UART instance. +#endif /* UART 0 */ +#endif /* UART 1 */ +#endif /* UART 2 */ +#endif /* UART 3 */ +#endif /* UART 4 */ +#endif /* UART 5 */ + +/*<! Structure definition for uart_dma_handle_t. The structure is private. */ +typedef struct _uart_dma_private_handle +{ + UART_Type *base; + uart_dma_handle_t *handle; +} uart_dma_private_handle_t; + +/* UART DMA transfer handle. */ +enum _uart_dma_tansfer_states +{ + kUART_TxIdle, /* TX idle. */ + kUART_TxBusy, /* TX busy. */ + kUART_RxIdle, /* RX idle. */ + kUART_RxBusy /* RX busy. */ +}; + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/*<! Private handle only used for internally. */ +static uart_dma_private_handle_t s_dmaPrivateHandle[UART_HANDLE_ARRAY_SIZE]; + +/******************************************************************************* + * Prototypes + ******************************************************************************/ + +/*! + * @brief UART DMA send finished callback function. + * + * This function is called when UART DMA send finished. It disables the UART + * TX DMA request and sends @ref kStatus_UART_TxIdle to UART callback. + * + * @param handle The DMA handle. + * @param param Callback function parameter. + */ +static void UART_TransferSendDMACallback(dma_handle_t *handle, void *param); + +/*! + * @brief UART DMA receive finished callback function. + * + * This function is called when UART DMA receive finished. It disables the UART + * RX DMA request and sends @ref kStatus_UART_RxIdle to UART callback. + * + * @param handle The DMA handle. + * @param param Callback function parameter. + */ +static void UART_TransferReceiveDMACallback(dma_handle_t *handle, void *param); + +/*! + * @brief Get the UART instance from peripheral base address. + * + * @param base UART peripheral base address. + * @return UART instance. + */ +extern uint32_t UART_GetInstance(UART_Type *base); + +/******************************************************************************* + * Code + ******************************************************************************/ + +static void UART_TransferSendDMACallback(dma_handle_t *handle, void *param) +{ + uart_dma_private_handle_t *uartPrivateHandle = (uart_dma_private_handle_t *)param; + + /* Disable UART TX DMA. */ + UART_EnableTxDMA(uartPrivateHandle->base, false); + + /* Disable interrupt. */ + DMA_DisableInterrupts(handle->base, handle->channel); + + uartPrivateHandle->handle->txState = kUART_TxIdle; + + if (uartPrivateHandle->handle->callback) + { + uartPrivateHandle->handle->callback(uartPrivateHandle->base, uartPrivateHandle->handle, kStatus_UART_TxIdle, + uartPrivateHandle->handle->userData); + } +} + +static void UART_TransferReceiveDMACallback(dma_handle_t *handle, void *param) +{ + uart_dma_private_handle_t *uartPrivateHandle = (uart_dma_private_handle_t *)param; + + /* Disable UART RX DMA. */ + UART_EnableRxDMA(uartPrivateHandle->base, false); + + /* Disable interrupt. */ + DMA_DisableInterrupts(handle->base, handle->channel); + + uartPrivateHandle->handle->rxState = kUART_RxIdle; + + if (uartPrivateHandle->handle->callback) + { + uartPrivateHandle->handle->callback(uartPrivateHandle->base, uartPrivateHandle->handle, kStatus_UART_RxIdle, + uartPrivateHandle->handle->userData); + } +} + +void UART_TransferCreateHandleDMA(UART_Type *base, + uart_dma_handle_t *handle, + uart_dma_transfer_callback_t callback, + void *userData, + dma_handle_t *txDmaHandle, + dma_handle_t *rxDmaHandle) +{ + assert(handle); + + uint32_t instance = UART_GetInstance(base); + + memset(handle, 0, sizeof(*handle)); + + s_dmaPrivateHandle[instance].base = base; + s_dmaPrivateHandle[instance].handle = handle; + + handle->rxState = kUART_RxIdle; + handle->txState = kUART_TxIdle; + + handle->callback = callback; + handle->userData = userData; + +#if defined(FSL_FEATURE_UART_HAS_FIFO) && FSL_FEATURE_UART_HAS_FIFO + /* Note: + Take care of the RX FIFO, DMA request only assert when received bytes + equal or more than RX water mark, there is potential issue if RX water + mark larger than 1. + For example, if RX FIFO water mark is 2, upper layer needs 5 bytes and + 5 bytes are received. the last byte will be saved in FIFO but not trigger + DMA transfer because the water mark is 2. + */ + if (rxDmaHandle) + { + base->RWFIFO = 1U; + } +#endif + + handle->rxDmaHandle = rxDmaHandle; + handle->txDmaHandle = txDmaHandle; + + /* Configure TX. */ + if (txDmaHandle) + { + DMA_SetCallback(txDmaHandle, UART_TransferSendDMACallback, &s_dmaPrivateHandle[instance]); + } + + /* Configure RX. */ + if (rxDmaHandle) + { + DMA_SetCallback(rxDmaHandle, UART_TransferReceiveDMACallback, &s_dmaPrivateHandle[instance]); + } +} + +status_t UART_TransferSendDMA(UART_Type *base, uart_dma_handle_t *handle, uart_transfer_t *xfer) +{ + assert(handle->txDmaHandle); + + dma_transfer_config_t xferConfig; + status_t status; + + /* Return error if xfer invalid. */ + if ((0U == xfer->dataSize) || (NULL == xfer->data)) + { + return kStatus_InvalidArgument; + } + + /* If previous TX not finished. */ + if (kUART_TxBusy == handle->txState) + { + status = kStatus_UART_TxBusy; + } + else + { + handle->txState = kUART_TxBusy; + handle->txDataSizeAll = xfer->dataSize; + + /* Prepare transfer. */ + DMA_PrepareTransfer(&xferConfig, xfer->data, sizeof(uint8_t), (void *)UART_GetDataRegisterAddress(base), + sizeof(uint8_t), xfer->dataSize, kDMA_MemoryToPeripheral); + + /* Submit transfer. */ + DMA_SubmitTransfer(handle->txDmaHandle, &xferConfig, kDMA_EnableInterrupt); + DMA_StartTransfer(handle->txDmaHandle); + + /* Enable UART TX DMA. */ + UART_EnableTxDMA(base, true); + + status = kStatus_Success; + } + + return status; +} + +status_t UART_TransferReceiveDMA(UART_Type *base, uart_dma_handle_t *handle, uart_transfer_t *xfer) +{ + assert(handle->rxDmaHandle); + + dma_transfer_config_t xferConfig; + status_t status; + + /* Return error if xfer invalid. */ + if ((0U == xfer->dataSize) || (NULL == xfer->data)) + { + return kStatus_InvalidArgument; + } + + /* If previous RX not finished. */ + if (kUART_RxBusy == handle->rxState) + { + status = kStatus_UART_RxBusy; + } + else + { + handle->rxState = kUART_RxBusy; + handle->rxDataSizeAll = xfer->dataSize; + + /* Prepare transfer. */ + DMA_PrepareTransfer(&xferConfig, (void *)UART_GetDataRegisterAddress(base), sizeof(uint8_t), xfer->data, + sizeof(uint8_t), xfer->dataSize, kDMA_PeripheralToMemory); + + /* Submit transfer. */ + DMA_SubmitTransfer(handle->rxDmaHandle, &xferConfig, kDMA_EnableInterrupt); + DMA_StartTransfer(handle->rxDmaHandle); + + /* Enable UART RX DMA. */ + UART_EnableRxDMA(base, true); + + status = kStatus_Success; + } + + return status; +} + +void UART_TransferAbortSendDMA(UART_Type *base, uart_dma_handle_t *handle) +{ + assert(handle->txDmaHandle); + + /* Disable UART TX DMA. */ + UART_EnableTxDMA(base, false); + + /* Stop transfer. */ + DMA_AbortTransfer(handle->txDmaHandle); + + /* Write DMA->DSR[DONE] to abort transfer and clear status. */ + DMA_ClearChannelStatusFlags(handle->txDmaHandle->base, handle->txDmaHandle->channel, kDMA_TransactionsDoneFlag); + + handle->txState = kUART_TxIdle; +} + +void UART_TransferAbortReceiveDMA(UART_Type *base, uart_dma_handle_t *handle) +{ + assert(handle->rxDmaHandle); + + /* Disable UART RX DMA. */ + UART_EnableRxDMA(base, false); + + /* Stop transfer. */ + DMA_AbortTransfer(handle->rxDmaHandle); + + /* Write DMA->DSR[DONE] to abort transfer and clear status. */ + DMA_ClearChannelStatusFlags(handle->rxDmaHandle->base, handle->rxDmaHandle->channel, kDMA_TransactionsDoneFlag); + + handle->rxState = kUART_RxIdle; +} + +status_t UART_TransferGetSendCountDMA(UART_Type *base, uart_dma_handle_t *handle, uint32_t *count) +{ + assert(handle->txDmaHandle); + + if (kUART_TxIdle == handle->txState) + { + return kStatus_NoTransferInProgress; + } + + if (!count) + { + return kStatus_InvalidArgument; + } + + *count = handle->txDataSizeAll - DMA_GetRemainingBytes(handle->txDmaHandle->base, handle->txDmaHandle->channel); + + return kStatus_Success; +} + +status_t UART_TransferGetReceiveCountDMA(UART_Type *base, uart_dma_handle_t *handle, uint32_t *count) +{ + assert(handle->rxDmaHandle); + + if (kUART_RxIdle == handle->rxState) + { + return kStatus_NoTransferInProgress; + } + + if (!count) + { + return kStatus_InvalidArgument; + } + + *count = handle->rxDataSizeAll - DMA_GetRemainingBytes(handle->rxDmaHandle->base, handle->rxDmaHandle->channel); + + return kStatus_Success; +}