File content as of revision 4:e518dde96e59:

/* ISM43362Interface Example
 * Copyright (c) STMicroelectronics 2017
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef ISM43362_H
#define ISM43362_H
#include "ATParser.h"

#define ES_WIFI_MAX_SSID_NAME_SIZE                  32
#define ES_WIFI_MAX_PSWD_NAME_SIZE                  32
#define ES_WIFI_PRODUCT_ID_SIZE                     32
#define ES_WIFI_PRODUCT_NAME_SIZE                   32
#define ES_WIFI_FW_REV_SIZE                         16
#define ES_WIFI_API_REV_SIZE                        16
#define ES_WIFI_STACK_REV_SIZE                      16
#define ES_WIFI_RTOS_REV_SIZE                       16

// The input range for AT Command 'R1' is 0 to 1200 bytes
// 'R1' Set Read Transport Packet Size (bytes)
#define ES_WIFI_MAX_RX_PACKET_SIZE                     1200
// Module maxume DATA payload for Tx packet is 1460
#define ES_WIFI_MAX_TX_PACKET_SIZE                     1460
typedef enum ism_security {
    ISM_SECURITY_NONE         = 0x0,      /*!< open access point */
    ISM_SECURITY_WEP          = 0x1,      /*!< phrase conforms to WEP */
    ISM_SECURITY_WPA          = 0x2,      /*!< phrase conforms to WPA */
    ISM_SECURITY_WPA2         = 0x3,      /*!< phrase conforms to WPA2 */
    ISM_SECURITY_WPA_WPA2     = 0x4,      /*!< phrase conforms to WPA/WPA2 */
    ISM_SECURITY_UNKNOWN      = 0xFF,     /*!< unknown/unsupported security in scan results */
} ism_security_t;

extern "C" int32_t ParseNumber(char *ptr, uint8_t *cnt);

/** ISM43362Interface class.
    This is an interface to a ISM43362 radio.
 */
class ISM43362 {
public:
    ISM43362(PinName mosi, PinName miso, PinName clk, PinName nss, PinName resetpin, PinName datareadypin, PinName wakeup, bool debug = false);

    /**
    * Check firmware version of ISM43362
    *
    * @return fw version or null if no version is read
    */
    uint32_t get_firmware_version(void);

    /**
    * Reset ISM43362
    *
    * @return true only if ISM43362 resets successfully
    */
    bool reset(void);

    /**
    * Enable/Disable DHCP
    *
    * @param enabled DHCP enabled when true
    * @return true only if ISM43362 enables/disables DHCP successfully
    */
    bool dhcp(bool enabled);

    /**
    * Connect ISM43362 to AP
    *
    * @param ap the name of the AP
    * @param passPhrase the password of AP
    * @param ap_sec the security level of network AP
    * @return nsapi_error enum
    */
    int connect(const char *ap, const char *passPhrase, ism_security_t ap_sec);

    /**
    * Disconnect ISM43362 from AP
    *
    * @return true only if ISM43362 is disconnected successfully
    */
    bool disconnect(void);

    /**
    * Get the IP address of ISM43362
    *
    * @return null-teriminated IP address or null if no IP address is assigned
    */
    const char *getIPAddress(void);

    /**
    * Get the MAC address of ISM43362
    *
    * @return null-terminated MAC address or null if no MAC address is assigned
    */
    const char *getMACAddress(void);

    /** Get the local gateway
    *
    *  @return         Null-terminated representation of the local gateway
    *                  or null if no network mask has been recieved
    */
    const char *getGateway();

    /** Get the local network mask
     *
     *  @return         Null-terminated representation of the local network mask
     *                  or null if no network mask has been recieved
     */
    const char *getNetmask();

    /* Return RSSI for active connection
     *
     * @return      Measured RSSI
     */
    int8_t getRSSI();

    /**
    * Check if ISM43362 is conenected
    *
    * @return true only if the chip has an IP address
    */
    bool isConnected(void);

    /** Scan for available networks
     *
     * @param  ap    Pointer to allocated array to store discovered AP
     * @param  limit Size of allocated @a res array, or 0 to only count available AP
     * @return       Number of entries in @a res, or if @a count was 0 number of available networks, negative on error
     *               see @a nsapi_error
     */
    int scan(WiFiAccessPoint *res, unsigned limit);

    /**Perform a dns query
    *
    * @param name Hostname to resolve
    * @param ip   Buffer to store IP address
    * @return 0 true on success, false on failure
    */
    bool dns_lookup(const char *name, char *ip);

    /**
    * Open a socketed connection
    *
    * @param type the type of socket to open "UDP" or "TCP"
    * @param id id to give the new socket, valid 0-4
    * @param port port to open connection with
    * @param addr the IP address of the destination
    * @return true only if socket opened successfully
    */
    bool open(const char *type, int id, const char *addr, int port);

    /**
    * Sends data to an open socket
    *
    * @param id id of socket to send to
    * @param data data to be sent
    * @param amount amount of data to be sent - max 1024
    * @return true only if data sent successfully
    */
    bool send(int id, const void *data, uint32_t amount);

    /**
    * Receives data from an open socket
    *
    * @param id id to receive from
    * @param data placeholder for returned information
    * @param amount number of bytes to be received
    * @return the number of bytes received
    */
    int32_t recv(int id, void *data, uint32_t amount);

    /**
    * Closes a socket
    *
    * @param id id of socket to close, valid only 0-4
    * @return true only if socket is closed successfully
    */
    bool close(int id);

    /**
    * Checks if data is available
    */
    bool readable();

    /**
    * Checks if data can be written
    */
    bool writeable();

    /**
    * Attach a function to call whenever network state has changed
    *
    * @param func A pointer to a void function, or 0 to set as none
    */
    void attach(Callback<void()> func);

    /**
    * Check is datas are available to read for a socket
    * @param id socket id
    * @param data placeholder for returned information
    * @param amount size to read for the check
    * @return amount of read value, or -1 for errors
    */
    int check_recv_status(int id, void *data);

    /**
    * Attach a function to call whenever network state has changed
    *
    * @param obj pointer to the object to call the member function on
    * @param method pointer to the member function to call
    */
    template <typename T, typename M>
    void attach(T *obj, M method)
    {
        attach(Callback<void()>(obj, method));
    }

private:
    BufferedSpi _bufferspi;
    ATParser _parser;
    DigitalOut _resetpin;
    volatile int _active_id;
    void print_rx_buff(void);
    bool check_response(void);
    struct packet {
        struct packet *next;
        int id;
        uint32_t len;
        // data follows
    } *_packets, * *_packets_end;
    void _packet_handler();
    bool _ism_debug;

    char _ip_buffer[16];
    char _gateway_buffer[16];
    char _netmask_buffer[16];
    char _mac_buffer[18];
    uint32_t _FwVersionId;
};

#endif