Changes to the library related to interrupt mode.
Dependencies: ST_INTERFACES X_NUCLEO_COMMON
Dependents: Display_53L0A1_IntSatelites Display_53L0A1_InterruptMode
Fork of X_NUCLEO_53L0A1 by
Diff: x_nucleo_53l0a1.h.orig
- Revision:
- 7:35ecf3e060c3
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/x_nucleo_53l0a1.h.orig Mon Dec 05 11:50:38 2016 +0000 @@ -0,0 +1,198 @@ +/** + ****************************************************************************** + * @file x_nucleo_53L0A1.h + * @author IMG + * @version V1.0.0 + * @date 28-November-2016 + * @brief Header file for class X_NUCLEO_53L0A1 representing a X-NUCLEO-53L0A1 + * expansion board + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent from recursive inclusion --------------------------------*/ +#ifndef __X_NUCLEO_53L0A1_H +#define __X_NUCLEO_53L0A1_H + +/* Includes ------------------------------------------------------------------*/ +#include "vl53l0x_class.h" +#include "Display_class.h" +#include "stmpe1600_class.h" +#include "DevI2C.h" + +/** New device addresses */ +//#define NEW_SENSOR_CENTRE_ADDRESS 0x54 +#define NEW_SENSOR_CENTRE_ADDRESS 0x52 +#define NEW_SENSOR_LEFT_ADDRESS 0x56 +#define NEW_SENSOR_RIGHT_ADDRESS 0x58 + +/* Classes--------------------------------------------------------------------*/ + +/* Classes -------------------------------------------------------------------*/ +/** Class representing the X-NUCLEO-VL53L0A1 expansion board + */ +class X_NUCLEO_53L0A1 +{ +public: + /** Constructor 1 + * @param[in] &i2c device I2C to be used for communication + */ + X_NUCLEO_53L0A1(DevI2C *ext_i2c) : dev_i2c(ext_i2c) + { + stmpe1600_exp0 = new STMPE1600(*ext_i2c, (0x43 * 2)); // U21 + stmpe1600_exp0->writeSYS_CTRL (SOFT_RESET); + + stmpe1600_exp1 = new STMPE1600(*ext_i2c, (0x42 * 2)); // U19 + stmpe1600_exp1->writeSYS_CTRL (SOFT_RESET); + + display = new Display(*stmpe1600_exp0, *stmpe1600_exp1); + + xshutdown_centre=new STMPE1600DigiOut(*dev_i2c, GPIO_15, (0x42 * 2)); // U19 on schematic + sensor_centre=new VL53L0X(*dev_i2c, *xshutdown_centre, A2); + + xshutdown_left=new STMPE1600DigiOut(*dev_i2c, GPIO_14, (0x43 * 2)); // U21 on schematic + sensor_left=new VL53L0X(*dev_i2c, *xshutdown_left, D8); + + xshutdown_right=new STMPE1600DigiOut(*dev_i2c, GPIO_15, (0x43 * 2)); // U21 on schematic + sensor_right=new VL53L0X(*dev_i2c, *xshutdown_right, D2); + } + + /** Constructor 2 + * @param[in] &i2c device I2C to be used for communication + * @param[in] PinName gpio1_top Mbed DigitalOut pin name to be used as a top sensor GPIO_1 INT + * @param[in] PinName gpio1_bottom Mbed DigitalOut pin name to be used as a bottom sensor GPIO_1 INT + * @param[in] PinName gpio1_left Mbed DigitalOut pin name to be used as a left sensor GPIO_1 INT + * @param[in] PinName gpio1_right Mbed DigitalOut pin name to be used as a right sensor GPIO_1 INT + */ + X_NUCLEO_53L0A1(DevI2C *ext_i2c, PinName gpio1_centre, + PinName gpio1_left, PinName gpio1_right) : dev_i2c(ext_i2c) { + stmpe1600_exp0 = new STMPE1600(*ext_i2c, (0x43 * 2)); // U21 + stmpe1600_exp0->writeSYS_CTRL(SOFT_RESET); + + stmpe1600_exp1 = new STMPE1600(*ext_i2c, (0x42 * 2)); // U19 + stmpe1600_exp1->writeSYS_CTRL(SOFT_RESET); + + display = new Display(*stmpe1600_exp0, *stmpe1600_exp1); + + xshutdown_centre=new STMPE1600DigiOut(*dev_i2c, GPIO_15, (0x42 * 2)); // U19 on schematic + sensor_centre=new VL53L0X(*dev_i2c, *xshutdown_centre, gpio1_centre); + + xshutdown_left=new STMPE1600DigiOut(*dev_i2c, GPIO_14, (0x43 * 2)); // U21 on schematic + sensor_left=new VL53L0X(*dev_i2c, *xshutdown_left, gpio1_left); + + xshutdown_right=new STMPE1600DigiOut(*dev_i2c, GPIO_15, (0x43 * 2)); // U21 on schematic + sensor_right=new VL53L0X(*dev_i2c, *xshutdown_right, gpio1_right); + } + + /** Destructor + */ + ~X_NUCLEO_53L0A1() + { + if(xshutdown_centre!=NULL) + { + delete xshutdown_centre; + xshutdown_centre=NULL; + } + if(sensor_centre!=NULL) + { + delete sensor_centre; + sensor_centre=NULL; + } + if(xshutdown_left!=NULL) + { + delete xshutdown_left; + xshutdown_left=NULL; + } + if(sensor_left!=NULL) + { + delete sensor_left; + sensor_left=NULL; + } + if(xshutdown_right!=NULL) + { + delete xshutdown_right; + xshutdown_right=NULL; + } + if(sensor_right!=NULL) + { + delete sensor_right; + sensor_right=NULL; + } + + delete stmpe1600_exp0; + stmpe1600_exp0 = NULL; + delete stmpe1600_exp1; + stmpe1600_exp1 = NULL; + delete display; + display = NULL; + _instance=NULL; + } + + /** + * @brief Creates a singleton object instance + * @param[in] &i2c device I2C to be used for communication + * @return Pointer to the object instance + */ + static X_NUCLEO_53L0A1 *Instance(DevI2C *ext_i2c); + + /** + * @brief Creates a singleton object instance + * @param[in] &i2c device I2C to be used for communication + * @param[in] PinName gpio1_centre the pin connected to top sensor INT + * @param[in] PinName gpio1_left the pin connected to left sensor INT + * @param[in] PinName gpio1_right the pin connected to right sensor INT + * @return Pointer to the object instance + */ + static X_NUCLEO_53L0A1 *Instance(DevI2C *ext_i2c, PinName gpio1_centre, + PinName gpio1_left, PinName gpio1_right); + + /** + * @brief Initialize the board and sensors with deft values + * @return 0 on success + */ + int InitBoard(); + + DevI2C *dev_i2c; + VL53L0X *sensor_centre; + VL53L0X *sensor_left; + VL53L0X *sensor_right; + STMPE1600 *stmpe1600_exp0; + STMPE1600 *stmpe1600_exp1; + STMPE1600DigiOut *xshutdown_centre; + STMPE1600DigiOut *xshutdown_left; + STMPE1600DigiOut *xshutdown_right; + Display *display; + + private: + static X_NUCLEO_53L0A1 *_instance; +}; + +#endif /* __X_NUCLEO_53L0A1_H */ + +