Delayed LED control using bools to save input values
Fork of MODSERIAL by
Diff: Device/MODSERIAL_KL25Z.h
- Revision:
- 29:9a41078f0488
- Parent:
- 28:76793a84f9e5
diff -r 76793a84f9e5 -r 9a41078f0488 Device/MODSERIAL_KL25Z.h --- a/Device/MODSERIAL_KL25Z.h Fri Jul 12 15:27:07 2013 +0000 +++ b/Device/MODSERIAL_KL25Z.h Fri Jul 12 15:56:20 2013 +0000 @@ -6,14 +6,14 @@ #define ENABLE_TX_IRQ MODSERIAL_IRQ_REG |= (1UL << UART_C2_TIE_SHIFT) #define ENABLE_RX_IRQ MODSERIAL_IRQ_REG |= (1UL << UART_C2_RIE_SHIFT) -#define RESET_TX_FIFO while(0 == 1) -#define RESET_RX_FIFO while(MODSERIAL_READABLE) char dummy = MODSERIAL_READ_REG - #define MODSERIAL_READ_REG ((UART_Type*)_base)->D #define MODSERIAL_WRITE_REG ((UART_Type*)_base)->D #define MODSERIAL_READABLE ((((UART_Type*)_base)->S1 & (1UL<<5)) != 0) #define MODSERIAL_WRITABLE ((((UART_Type*)_base)->S1 & (1UL<<7)) != 0) +#define RESET_TX_FIFO while(0 == 1) +#define RESET_RX_FIFO while(MODSERIAL_READABLE) char dummy = MODSERIAL_READ_REG + #define RX_IRQ_ENABLED ((MODSERIAL_IRQ_REG & (1UL << UART_C2_RIE_SHIFT)) != 0 ) #define TX_IRQ_ENABLED ((MODSERIAL_IRQ_REG & (1UL << UART_C2_TIE_SHIFT)) != 0 )