Diff: easy-connect/wnc14a2a-driver/README.md

Revision:

0:24d3eb812fd4

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/easy-connect/wnc14a2a-driver/README.md	Wed Sep 05 14:28:24 2018 +0000
@@ -0,0 +1,57 @@
+
+# Easy Connect with the wnc14a2a-library
+
+## Specifying the connectivity method
+
+Add the following to your `mbed_app.json` file:
+
+```json
+{
+    "config": {
+        "network-interface":{
+            "help": "options are ETHERNET, WIFI_ESP8266, WIFI_IDW0XX1, WIFI_ODIN, WIFI_RTW, WIFI_WIZFI310, WIFI_ISM43362, MESH_LOWPAN_ND, MESH_THREAD, CELLULAR_ONBOARD, CELLULAR_WNC14A2A",
+            "value": "CELLULAR_WNC14A2A"
+        }
+    },
+    }
+}
+```
+
+## Debug settings
+You may also want to specify the following to obtain debug output. This is added to the "config" section:
+
+```json
+    "config": {
+       "wnc_debug": {
+           "help" : "enable or disable WNC debug messages.",
+           "value": 0
+       },
+       "wnc_debug_setting": {
+           "help" : "bit value 1 and/or 2 enable WncController debug output, bit value 4 enables mbed driver debug output.",
+           "value": "4"
+       }
+    }
+```
+
+where the wnc_debug is either 'true' or 'false' to enable or disable debug output and the `wnc_debug_setting` variable is a 
+bit-field with the following settings:
+     0x01 - Basic WNC driver debug output
+     0x02 - Comprehensive WNC driver debug output
+     0x04 - Driver Enter/Exit debug information
+     0x08 - Driver Event Queue debug information
+     0x10 - SMS debug information
+     0x20 - Dump Driver Arrays
+
+## Overriding settings
+You need to increase the size of the Tx and Rx buffers used when communicating to the WNC device by adding (increas the buffer
+size to 4KB from 256 Bytes):
+
+
+```json
+    "target_overrides": {
+        "*": {
+            "drivers.uart-serial-txbuf-size": 4096,
+            "drivers.uart-serial-rxbuf-size": 4096
+        }
+```
+