This Automatic mode is the most simple lib for MCU Gear with LPC1114FN28. You don't need to think about Bank.
Dependents: MCUGearALPC1114FN28
Fork of MCUGearA by
Diff: MCUGearBaseA.cpp
- Revision:
- 0:12d93184b350
- Child:
- 1:95255bae41c8
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/MCUGearBaseA.cpp Sun Mar 09 09:33:14 2014 +0000 @@ -0,0 +1,93 @@ +/* MCU Gear Library, only for testing MCUGear without any circuit you connected. + * Copyright (c) 2013, NestEgg Inc., http://www.mcugear.com/ + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "mbed.h" +#include "MCUGearBaseA.h" + +#if defined TARGET_LPC1768 +I2C fpga_i2c(p28, p27); +#endif + +#if defined TARGET_KL25Z +I2C fpga_i2c(PTE0, PTE1); +#endif + +void fpga_write(int dev_adr,unsigned char adr, unsigned char data) { + char cmd[2]; + cmd[0] = adr; + cmd[1] = data; + fpga_i2c.frequency (FPGA_I2C_CLOCK); + fpga_i2c.write(dev_adr, cmd, 2); + +} + +unsigned char fpga_read(int dev_adr,unsigned char adr) { + char cmd[2]; + cmd[0] = adr; + fpga_i2c.write(dev_adr, cmd, 1); + fpga_i2c.read(dev_adr, cmd, 1); + return cmd[0]; +} + +void initBase(void){ + + // FPGA reg clear + for (int i=0;i<20;i++) + fpga_write(FPGA_I2C_ADR,0x80+i,0); + + // read FPGA registers + fpga_read(FPGA_I2C_ADR,FPGA_SYSINFO_0); + fpga_read(FPGA_I2C_ADR,FPGA_SYSINFO_0+1); + fpga_read(FPGA_I2C_ADR,FPGA_SYSINFO_0+2); + fpga_read(FPGA_I2C_ADR,FPGA_SYSINFO_0+3); + // FPGA enable + fpga_write(FPGA_I2C_ADR,FPGA_ENABLE,1); +} + +void I2Cwrite(char addr, char data){ + + char cmd[1]; + cmd[0] = data; + fpga_i2c.write(addr, cmd, 1); + //wait(0.01); + +} + +void changeBank(uint8_t bank){ + fpga_write(FPGA_I2C_ADR,0x10,bank); +} + +void deleteBank(uint8_t bank){ + fpga_write(FPGA_I2C_ADR,0x0c,(bank|0x80)); + fpga_write(FPGA_I2C_ADR,0x10, bank); +} +/* +void startReg(uint8_t bank){ + fpga_write(FPGA_I2C_ADR,0x0c,bank); +} + +void endReg(uint8_t bank){ + fpga_write(FPGA_I2C_ADR,0x10, (bank|0x04)); +} +*/ + +