Diff: RA8875.h

Revision:

71:dcac8efd842d

Parent:

68:ab08efabfc88

Child:

72:ecffe56af969

diff -r 4cb28f9472fc -r dcac8efd842d RA8875.h
--- a/RA8875.h	Sun Aug 31 15:58:15 2014 +0000
+++ b/RA8875.h	Sat Oct 04 17:45:50 2014 +0000
@@ -343,7 +343,7 @@
     /// @param[inout] y is the y position where the touch was registered.
     /// @returns true if touch was detected, in which case the x and y values were set.
     ///
-    unsigned char TouchPanelRead(loc_t *x, loc_t *y);
+    uint8_t TouchPanelRead(loc_t *x, loc_t *y);
 
     /// Poll the TouchPanel and on a touch event return the raw x, y coordinates.
     ///
@@ -351,7 +351,7 @@
     /// @param[inout] y is the y position where the touch was registered.
     /// @returns true if touch was detected, in which case the x and y values were set.
     ///
-    unsigned char TouchPanelReadRaw(loc_t *x, loc_t *y);
+    uint8_t TouchPanelReadRaw(loc_t *x, loc_t *y);
     
     /// Append interrupt handler for specific RA8875 interrupt source
     ///
@@ -378,6 +378,64 @@
     ///
     void UnAppendISR(uint8_t bISRType);
 
+
+    /// Initialize the keypad interface on the RA8875 controller.
+    ///
+    /// Enables the keypad subsystem. It will scan the 4 x 5 matrix
+    /// and make available key presses. 
+    ///
+    /// @note See section 5-13 of RAIO RA8875 data sheet for more details.
+    /// @caution When using the display from buy-display.com, be sure that
+    ///     the option for the keypad is configured on the hardware.
+    ///
+    /// All parameters are optional.
+    /// @param[in] scanEnable, when true, enables the key scan function (default: true).
+    /// @param[in] longDetect, when true, additionally enables the long key held detection (default: false).
+    /// @param[in] sampleTime setting (range: 0 - 3, default: 0).
+    /// @param[in] scanFrequency setting (range: 0 - 7, default: 0).
+    /// @param[in] longTimeAdjustment (range: 0 - 3, default: 0).
+    /// @param[in] interruptEnable, when true, enables interrupts from keypress (default: false).
+    /// @param[in] wakeupEnable, when true, activates the wakeup function (default: false).
+    ///
+    /// @returns success/failure code. @see RetCode_t.
+    ///
+    RetCode_t  KeypadInit(bool scanEnable = true, bool longDetect = false, 
+        uint8_t sampleTime = 0, uint8_t scanFrequency = 0, 
+        uint8_t longTimeAdjustment = 0,
+        bool interruptEnable = false, bool wakeupEnable = false);
+
+    /// Determine if a key has been hit
+    ///
+    /// @returns true if a key has been hit
+    ///
+    bool _kbhit();
+
+    /// Blocking read of the keypad.
+    ///
+    /// @caution: This is a blocking read, so it is important to first call _kbhit()
+    ///         to avoid hanging your processes.
+    ///
+    /// A keypad connected to the RA8875 is connected in a matrix of 4 rows and 5 columns.
+    /// The row where a key is pressed is returned in the lower 2 bits of the upper nibble,
+    /// and the column where a key is pressed is returned in the lower 3 bits of the lower nibble.
+    ///
+    /// Additionally, if configured to detect a "long press", bit 7 will be set to indicate
+    /// this. In this situation, first a "normal press" would be detected and signaled and
+    /// soon after that a "long press" of the same key would be detected and communicated.
+    ///
+    /// Return value encoding: LxRR xCCC
+    /// L = Long Press was detected
+    /// RR = Row number 0 to 3
+    ///
+    /// @return 8-bit value coded as L0RR 0CCC:
+    ///     - L = 1 = Long Press detected
+    ///     - x = 0 = not used
+    ///     - R = 0-3 = Row Number
+    ///     - C = 0-4 = Column Number
+    ///
+    uint8_t _getch();
+
+
     /// Write a command to the display with a word of data.
     ///
     /// This is a high level command, and may invoke several primitives.