Jasper Gerth
this simple program makes the outputshaft follow the position of the potmeter
Dependencies: Encoder HIDScope MODSERIAL mbed
Revision 0:6ffe287c9e4c, committed 2015-09-22
- Comitter:
- Gerth
- Date:
- Tue Sep 22 11:52:38 2015 +0000
- Commit message:
- with this simple program the outputshaft follows the potmeter;
Changed in this revision
diff -r 000000000000 -r 6ffe287c9e4c Encoder.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Encoder.lib Tue Sep 22 11:52:38 2015 +0000 @@ -0,0 +1,1 @@ +http://developer.mbed.org/users/vsluiter/code/Encoder/#18b000b443af
diff -r 000000000000 -r 6ffe287c9e4c HIDScope.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/HIDScope.lib Tue Sep 22 11:52:38 2015 +0000 @@ -0,0 +1,1 @@ +http://developer.mbed.org/users/tomlankhorst/code/HIDScope/#5020a2c0934b
diff -r 000000000000 -r 6ffe287c9e4c MODSERIAL.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/MODSERIAL.lib Tue Sep 22 11:52:38 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/Sissors/code/MODSERIAL/#8ef4f91813fd
diff -r 000000000000 -r 6ffe287c9e4c main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Tue Sep 22 11:52:38 2015 +0000
@@ -0,0 +1,91 @@
+#include "mbed.h"
+#include "HIDScope.h"
+#include "encoder.h"
+
+//hidscope met gewenst aantal kanalen
+HIDScope scope(2);
+
+//analoog in van potmeter 1
+AnalogIn pot1(A0);
+
+//signaal naar motor uit
+DigitalOut motor1_direction(D7);// draairichting motor 1 (1 is CW )
+PwmOut motor1_speed_control(D6);//aanstuursnelheid motor 1
+//PwmOut motor2_speed_control(D5);
+//DigitalOut motor2_direction(D4);
+
+//encoders
+Encoder motor1_encoder(D13,D12);
+//Encoder motor2_encoder(D11,D10);
+
+//tickers
+Ticker scopedataticker;
+Ticker adjust_positionticker;
+
+//frequenties
+const float motor_frequency_pwm = 1000; //1kHz PWM
+const float scopedatafrequency=50;// frequentie waarmee informatie naar de scope gestuurd wordt
+const float adjust_position_frequency=8; // frequentie waarmee de motorpositie aangepast wordt
+
+//constanten
+const float cpr=4200;
+
+
+//go flags
+bool scopedata_go=false;
+bool adjust_position_go=false;
+
+//activators
+void scopedata_activate()
+{
+ scopedata_go=true;
+}
+void adjust_position_activate()
+{
+ adjust_position_go=true;
+}
+
+//scopefunctie
+void scopedata()
+{
+ scope.set(0,pot1.read());
+ scope.set(1,motor1_encoder.getPosition());
+ scope.send();
+}
+
+//adjust position
+void adjust_position()
+{
+ float wantedposition=cpr*(pot1.read());
+ int actualposition=(motor1_encoder.getPosition());
+ if (wantedposition<=actualposition) {
+ motor1_direction=0;
+ motor1_speed_control=0.5;
+ } else if (wantedposition>=actualposition) {
+ motor1_direction=1;
+ motor1_speed_control=0.5;
+ } else {
+ motor1_direction=1;
+ motor1_speed_control=0;
+ }
+}
+
+int main ()
+{
+ motor1_speed_control.period(1/motor_frequency_pwm);
+
+ scopedataticker.attach(&scopedata_activate,1/scopedatafrequency);
+ adjust_positionticker.attach(&adjust_position_activate,1/adjust_position_frequency);
+
+ while(1) {
+ if (scopedata_go==true) {
+ scopedata();
+ scopedata_go=false;
+ }
+ if (adjust_position_go==true) {
+ adjust_position();
+ adjust_position_go=false;
+
+ }
+ }
+}
diff -r 000000000000 -r 6ffe287c9e4c mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Tue Sep 22 11:52:38 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/4f6c30876dfa \ No newline at end of file