Gerhard Berman / Mbed 2 deprecated prog_forwardkin_feedback_copy3

New reference frame: y=0 is now at table height.

Dependencies:   HIDScope MODSERIAL QEI biquadFilter mbed

Fork of prog_forwardkin_feedback_copy by Elfi Hofmeijer

main.cpp@34:96bcbddc7d2d, 2016-11-01 (annotated)

Committer:
GerhardBerman
Date:
Tue Nov 01 13:45:31 2016 +0000
Revision:
34:96bcbddc7d2d
Parent:
33:b09608fa69e9
Child:
35:a21c1cab8086
Child:
36:72f0913c5460
Motors working slowly, moving slowly to correct reference angles!

Who changed what in which revision?

UserRevisionLine numberNew contents of line
GerhardBerman 0:43160ef59f9f 1 #include "mbed.h"
GerhardBerman 0:43160ef59f9f 2 #include <math.h>
GerhardBerman 0:43160ef59f9f 3 #include "MODSERIAL.h"
GerhardBerman 0:43160ef59f9f 4 #include "QEI.h"
GerhardBerman 0:43160ef59f9f 5 #include "HIDScope.h"
GerhardBerman 0:43160ef59f9f 6 #include "BiQuad.h"
GerhardBerman 0:43160ef59f9f 7
GerhardBerman 17:91d20d362e72 8 /*
GerhardBerman 17:91d20d362e72 9 THINGS TO CONSIDER
GerhardBerman 17:91d20d362e72 10 - Line 234, 239: motor action of motor 1 is inverted because it is mounted
GerhardBerman 17:91d20d362e72 11 opposite to motor 2 in the tower. Check if the clockwise directions of the
GerhardBerman 17:91d20d362e72 12 motors correspond to the positive q1, q2-directions (both counterclockwise)
GerhardBerman 17:91d20d362e72 13 in the original IK-sketch.
GerhardBerman 17:91d20d362e72 14 - Line 244,257: motor values have been scaled down for safety at first test, restore
GerhardBerman 17:91d20d362e72 15 after testing to get proper action.
GerhardBerman 19:cba54636bd62 16 - Set angle and length boundaries!!
GerhardBerman 17:91d20d362e72 17 - Set robot constants (lengths etc.)
GerhardBerman 18:d2cfd07ae88a 18 - Set EMGgain and thresholds
GerhardBerman 23:3a4d5e19c20d 19 - Add tower height to ReferencePosition_y and Position_y AND inverse kinematics calculation!
GerhardBerman 22:c679f753a8bd 20 - Add (lower) boundaries to TotalErrors
GerhardBerman 22:c679f753a8bd 21 - MotorGain could change due to arm weight!!
GerhardBerman 22:c679f753a8bd 22 - Arms should be placed manually into reference position.
GerhardBerman 17:91d20d362e72 23 */
GerhardBerman 17:91d20d362e72 24
GerhardBerman 0:43160ef59f9f 25 //set pins
GerhardBerman 0:43160ef59f9f 26 DigitalIn encoder1A (D13); //Channel A van Encoder 1
GerhardBerman 0:43160ef59f9f 27 DigitalIn encoder1B (D12); //Channel B van Encoder 1
GerhardBerman 14:725a608b6709 28 DigitalIn encoder2A (D11); //Channel A van Encoder 2, kan niet op D15
GerhardBerman 14:725a608b6709 29 DigitalIn encoder2B (D10); //Channel B van Encoder 2, kan niet op D14
GerhardBerman 14:725a608b6709 30 //DigitalOut led1 (D11);
GerhardBerman 14:725a608b6709 31 //DigitalOut led2 (D10);
GerhardBerman 19:cba54636bd62 32 //AnalogIn potMeter1(A2);
GerhardBerman 19:cba54636bd62 33 //AnalogIn potMeter2(A1);
GerhardBerman 0:43160ef59f9f 34 DigitalOut motor1DirectionPin(D7);
GerhardBerman 0:43160ef59f9f 35 PwmOut motor1MagnitudePin(D6);
GerhardBerman 7:2f74dfd1d411 36 DigitalOut motor2DirectionPin(D4);
GerhardBerman 7:2f74dfd1d411 37 PwmOut motor2MagnitudePin(D5);
GerhardBerman 9:e4c34f5665a0 38 DigitalIn button1(D3);
GerhardBerman 7:2f74dfd1d411 39 DigitalIn button2(D9);
GerhardBerman 0:43160ef59f9f 40
GerhardBerman 33:b09608fa69e9 41 DigitalOut ledgrn(LED_GREEN);
GerhardBerman 33:b09608fa69e9 42 DigitalOut ledred(LED_RED);
GerhardBerman 33:b09608fa69e9 43 DigitalOut ledblue(LED_BLUE);
GerhardBerman 33:b09608fa69e9 44
GerhardBerman 7:2f74dfd1d411 45 //library settings
GerhardBerman 0:43160ef59f9f 46 Serial pc(USBTX,USBRX);
GerhardBerman 3:8caef4872b0c 47 Ticker MeasureTicker, BiQuadTicker; //, TimeTracker; // sampleT;
GerhardBerman 33:b09608fa69e9 48 //HIDScope scope(6);
GerhardBerman 0:43160ef59f9f 49
GerhardBerman 26:bb7e14f59ddd 50 //initial values
GerhardBerman 7:2f74dfd1d411 51 float dx;
GerhardBerman 7:2f74dfd1d411 52 float dy;
GerhardBerman 23:3a4d5e19c20d 53 double DerivativeCounts;
GerhardBerman 19:cba54636bd62 54 //float referenceVelocity = 0;
GerhardBerman 19:cba54636bd62 55 //float bqcDerivativeCounts = 0;
GerhardBerman 3:8caef4872b0c 56 const float PI = 3.141592653589793;
GerhardBerman 3:8caef4872b0c 57 const int cw = 0; //values for cw and ccw are inverted!! cw=0 and ccw=1
GerhardBerman 3:8caef4872b0c 58 const int ccw = 1;
GerhardBerman 0:43160ef59f9f 59
GerhardBerman 26:bb7e14f59ddd 60 //set lengths (VALUES HAVE TO BE CHANGED)
GerhardBerman 26:bb7e14f59ddd 61 float x0 = 1.0;
GerhardBerman 26:bb7e14f59ddd 62 float L0 = 1.0;
GerhardBerman 26:bb7e14f59ddd 63 float L1 = 1.0;
GerhardBerman 26:bb7e14f59ddd 64 float L2 = 1.0;
GerhardBerman 34:96bcbddc7d2d 65 float TowerHeight = 0.4; //height of motor axes above table surface!
GerhardBerman 34:96bcbddc7d2d 66 float StampHeight = 0.1; // height of end effector
GerhardBerman 34:96bcbddc7d2d 67 float y_stampup = 0.1; //height stamp while not stamping: 10cm above table surface
GerhardBerman 34:96bcbddc7d2d 68 float y_stampdown = 0.0; //height stamp while stamping: at table surface
GerhardBerman 34:96bcbddc7d2d 69
GerhardBerman 26:bb7e14f59ddd 70
GerhardBerman 19:cba54636bd62 71 //set initial conditions
GerhardBerman 19:cba54636bd62 72 float biceps_l = 0;
GerhardBerman 19:cba54636bd62 73 float biceps_r = 0;
GerhardBerman 19:cba54636bd62 74 float ReferencePosition_x = L2;
GerhardBerman 28:6d8c6fe79394 75 float ReferencePosition_y = L1 + TowerHeight - StampHeight;
GerhardBerman 19:cba54636bd62 76 float ReferencePosition_xnew = 0;
GerhardBerman 19:cba54636bd62 77 float ReferencePosition_ynew = 0;
GerhardBerman 19:cba54636bd62 78 float Position_x = 0.0;
GerhardBerman 19:cba54636bd62 79 float Position_y = 0.0;
GerhardBerman 19:cba54636bd62 80 float q1 = 0;
GerhardBerman 19:cba54636bd62 81 float q2 = 0;
GerhardBerman 19:cba54636bd62 82 float q1_ref = 0;
GerhardBerman 19:cba54636bd62 83 float q2_ref = 0;
GerhardBerman 19:cba54636bd62 84 float q1start = 0;
GerhardBerman 19:cba54636bd62 85 float q2start = PI/2;
GerhardBerman 19:cba54636bd62 86
GerhardBerman 19:cba54636bd62 87 float q1_error_prev = 0;
GerhardBerman 19:cba54636bd62 88 float q2_error_prev = 0;
GerhardBerman 25:596255732b65 89 float DerTotalError1 = 0;
GerhardBerman 25:596255732b65 90 float DerTotalError2 = 0;
GerhardBerman 19:cba54636bd62 91 float q1IntError = 0;
GerhardBerman 19:cba54636bd62 92 float q2IntError = 0;
GerhardBerman 29:caf3dd699617 93 float TotalError1_prev = 0;
GerhardBerman 29:caf3dd699617 94 float TotalError2_prev = 0;
GerhardBerman 19:cba54636bd62 95
GerhardBerman 19:cba54636bd62 96 float motorValue1 = 0.0;
GerhardBerman 19:cba54636bd62 97 float motorValue2 = 0.0;
GerhardBerman 19:cba54636bd62 98 int counts1 = 0;
GerhardBerman 19:cba54636bd62 99 int counts2 = 0;
GerhardBerman 19:cba54636bd62 100 int counts1Prev = 0;
GerhardBerman 19:cba54636bd62 101 int counts2Prev = 0;
GerhardBerman 26:bb7e14f59ddd 102
GerhardBerman 26:bb7e14f59ddd 103
GerhardBerman 26:bb7e14f59ddd 104 //set constant or variable values (VALUES HAVE TO BE EDITED)
GerhardBerman 26:bb7e14f59ddd 105 float EMGgain = 1.0;
GerhardBerman 26:bb7e14f59ddd 106 float dy_stampdown = 2.0; //0.05; //5 cm movement downward to stamp
GerhardBerman 26:bb7e14f59ddd 107 float MotorGain = 8.4; // rad/s for PWM, is max motor speed (motor value of 1)
GerhardBerman 34:96bcbddc7d2d 108 float t_sample = 0.1; //seconds
GerhardBerman 34:96bcbddc7d2d 109 const float maxStampDistance = 2.0;
GerhardBerman 26:bb7e14f59ddd 110
GerhardBerman 26:bb7e14f59ddd 111 float q1_refOutNew = 0;
GerhardBerman 34:96bcbddc7d2d 112 float q1_refOutMin = -100; //WRONG values
GerhardBerman 34:96bcbddc7d2d 113 float q1_refOutMax = 100; //WRONG values
GerhardBerman 26:bb7e14f59ddd 114 float q2_refOutNew = 0;
GerhardBerman 34:96bcbddc7d2d 115 float q2_refOutMin = -100; //WRONG values
GerhardBerman 34:96bcbddc7d2d 116 float q2_refOutMax = 100; //WRONG values
GerhardBerman 26:bb7e14f59ddd 117 float TotalError1= 0;
GerhardBerman 26:bb7e14f59ddd 118 float TotalError2= 0;
GerhardBerman 26:bb7e14f59ddd 119 float TotalErrorMin= 0;
GerhardBerman 19:cba54636bd62 120
GerhardBerman 0:43160ef59f9f 121 //set BiQuad
GerhardBerman 0:43160ef59f9f 122 BiQuadChain bqc;
GerhardBerman 0:43160ef59f9f 123 BiQuad bq1(0.0186, 0.0743, 0.1114, 0.0743, 0.0186); //get numbers from butter filter MATLAB
GerhardBerman 0:43160ef59f9f 124 BiQuad bq2(1.0000, -1.5704, 1.2756, -0.4844, 0.0762);
GerhardBerman 0:43160ef59f9f 125
GerhardBerman 0:43160ef59f9f 126 //set go-Ticker settings
GerhardBerman 3:8caef4872b0c 127 volatile bool MeasureTicker_go=false, BiQuadTicker_go=false, FeedbackTicker_go=false, TimeTracker_go=false; // sampleT_go=false;
GerhardBerman 3:8caef4872b0c 128 void MeasureTicker_act(){MeasureTicker_go=true;}; // Activates go-flags
GerhardBerman 3:8caef4872b0c 129 void BiQuadTicker_act(){BiQuadTicker_go=true;};
GerhardBerman 3:8caef4872b0c 130 void FeedbackTicker_act(){FeedbackTicker_go=true;};
GerhardBerman 3:8caef4872b0c 131 void TimeTracker_act(){TimeTracker_go=true;};
GerhardBerman 3:8caef4872b0c 132 //void sampleT_act(){sampleT_go=true;};
GerhardBerman 3:8caef4872b0c 133
GerhardBerman 3:8caef4872b0c 134 //define encoder counts and degrees
GerhardBerman 7:2f74dfd1d411 135 QEI Encoder1(D12, D13, NC, 32); // turns on encoder
GerhardBerman 15:9061cf7db23e 136 QEI Encoder2(D10, D11, NC, 32); // turns on encoder
GerhardBerman 14:725a608b6709 137
GerhardBerman 4:19e376d31380 138 const int counts_per_revolution = 4200; //counts per motor axis revolution
GerhardBerman 4:19e376d31380 139 const int inverse_gear_ratio = 131;
GerhardBerman 4:19e376d31380 140 const float resolution = counts_per_revolution/(2*PI/inverse_gear_ratio); //87567.0496892 counts per radian, encoder axis
GerhardBerman 3:8caef4872b0c 141
GerhardBerman 19:cba54636bd62 142 void GetReferenceKinematics1(float &q1Out, float &q2Out, float &q1_refOut, float &q2_refOut){
GerhardBerman 7:2f74dfd1d411 143
GerhardBerman 19:cba54636bd62 144 //get joint positions q feedback from encoder
GerhardBerman 19:cba54636bd62 145 float Encoder1Position = counts1/resolution; //angular position in radians, encoder axis
GerhardBerman 9:e4c34f5665a0 146 float Encoder2Position = counts2/resolution;
GerhardBerman 19:cba54636bd62 147
GerhardBerman 19:cba54636bd62 148 q1Out = q1start + Encoder1Position*inverse_gear_ratio; //angular position in radians, motor axis
GerhardBerman 19:cba54636bd62 149 q2Out = q2start + Encoder2Position*inverse_gear_ratio;
GerhardBerman 7:2f74dfd1d411 150
GerhardBerman 19:cba54636bd62 151 /*
GerhardBerman 19:cba54636bd62 152 //get end effector position feedback with Brockett
GerhardBerman 18:d2cfd07ae88a 153 float Position_x = ((L2 + x0)*(cos(q1)*cos(q2) - sin(q1)*sin(q2)) - L0*sin(q1) + (cos(q1)*sin(q2) + cos(q2)*sin(q1))*(L0 + L1) - cos(q1)*(L1*sin(q1) + L1*cos(q1)*sin(q2) - L1*cos(q2)*sin(q1)) - sin(q1)*(L1*cos(q1)*cos(q2) - L1*cos(q1) + L1*sin(q1)*sin(q2))); //calculate end effector x-position from motor angles with Brockett, rx
GerhardBerman 18:d2cfd07ae88a 154 float Position_y = (L0 - (L2 + x0)*(cos(q1)*sin(q2) + cos(q2)*sin(q1)) - L0*cos(q1) - cos(q1)*(L1*cos(q1)*cos(q2) - L1*cos(q1) + L1*sin(q1)*sin(q2)) + (cos(q1)*cos(q2) - sin(q1)*sin(q2))*(L0 + L1) + sin(q1)*(L1*sin(q1) + L1*cos(q1)*sin(q2) - L1*cos(q2)*sin(q1))); //calculate end effector y-position from motor angles with Brockett, ry
GerhardBerman 19:cba54636bd62 155 */
GerhardBerman 19:cba54636bd62 156 //get end effector position feedback with trigonometry
GerhardBerman 19:cba54636bd62 157 Position_x = (L1*sin(q1) + L2*sin(q1+q2));
GerhardBerman 28:6d8c6fe79394 158 Position_y = (L1*cos(q1) + L2*cos(q1+q2)) + TowerHeight - StampHeight;
GerhardBerman 19:cba54636bd62 159 //float PositionVector = sqrt(pow(Position_x,2)+pow(Position_y,2));
GerhardBerman 29:caf3dd699617 160
GerhardBerman 33:b09608fa69e9 161 /*
GerhardBerman 29:caf3dd699617 162 if (Position_y < (0.5*TowerHeight)){
GerhardBerman 29:caf3dd699617 163 wait(1.0);
GerhardBerman 29:caf3dd699617 164 ReferencePosition_ynew = L1 + TowerHeight - StampHeight; //Reset vertical position after stamping
GerhardBerman 29:caf3dd699617 165 }
GerhardBerman 29:caf3dd699617 166 else{
GerhardBerman 33:b09608fa69e9 167 */
GerhardBerman 7:2f74dfd1d411 168 //get velocity vector v = (Pe*- Pe) = [0; dx; dy] from EMG
GerhardBerman 19:cba54636bd62 169 biceps_l = !button1.read() * EMGgain; //emg0.read(); //velocity or reference position change, EMG with a gain
GerhardBerman 19:cba54636bd62 170 biceps_r = !button2.read() * EMGgain; //emg1.read();
GerhardBerman 18:d2cfd07ae88a 171 if (biceps_l > 0 && biceps_r > 0){
GerhardBerman 8:935abf8ecc27 172 //both arms activated: stamp moves down
GerhardBerman 15:9061cf7db23e 173 //led1 = 1;
GerhardBerman 15:9061cf7db23e 174 //led2 = 1;
GerhardBerman 19:cba54636bd62 175 ReferencePosition_xnew = ReferencePosition_x;
GerhardBerman 34:96bcbddc7d2d 176 ReferencePosition_ynew = y_stampdown; //ReferencePosition_y - dy_stampdown; //into stamping vertical position ~the stamp down action
GerhardBerman 18:d2cfd07ae88a 177
GerhardBerman 18:d2cfd07ae88a 178 }
GerhardBerman 18:d2cfd07ae88a 179 else if (biceps_l > 0 && biceps_r <= 0){
GerhardBerman 18:d2cfd07ae88a 180 //arm 1 activated, move left
GerhardBerman 18:d2cfd07ae88a 181 //led1 = 1;
GerhardBerman 18:d2cfd07ae88a 182 //led2 = 0;
GerhardBerman 19:cba54636bd62 183 ReferencePosition_xnew = ReferencePosition_x - 0.2; //biceps_l;
GerhardBerman 34:96bcbddc7d2d 184 ReferencePosition_ynew = y_stampup; //ReferencePosition_y;
GerhardBerman 12:05e5964b69a4 185 /*
GerhardBerman 18:d2cfd07ae88a 186 PositionError_x = ReferencePosition_x - Position_x; //Position error in dx,dy
GerhardBerman 18:d2cfd07ae88a 187 PositionError_y = ReferencePosition_y - Position_y; //Position error in dx,dy
GerhardBerman 18:d2cfd07ae88a 188
GerhardBerman 18:d2cfd07ae88a 189 dx = PositionError_x;
GerhardBerman 18:d2cfd07ae88a 190 dy = PositionError_y;
GerhardBerman 12:05e5964b69a4 191 q1_dotOut = dy*(((x0 + L1*cos(q1))*(L0*L0 + L1*sin(q1)*L0 + x0*x0 + L1*cos(q1)*x0 + 1))/(pow(L1*cos(q1),2) + pow(L1*sin(q1),2) + pow(L1*x0*sin(q1),2) + pow(L0*L1*cos(q1),2) - 2*L0*L1*L1*x0*cos(q1)*sin(q1)) - (x0*(pow(L1*cos(q1),2) + pow(L1*sin(q1),2) + L0*L0 + x0*x0 + 2*L0*L1*sin(q1) + 2*L1*x0*cos(q1) + 1))/(pow(L1*cos(q1),2) + pow(L1*sin(q1),2) + pow(L1*x0*sin(q1),2) + pow(L0*L1*cos(q1),2) - 2*L0*L1*L1*x0*cos(q1)*sin(q1))) - dx*(((L0 + L1*sin(q1))*(L0*L0 + L1*sin(q1)*L0 + x0*x0 + L1*cos(q1)*x0 + 1))/(pow(L1*cos(q1),2) + pow(L1*sin(q1),2) + pow(L1*x0*sin(q1),2) + pow(L0*L1*cos(q1),2) - 2*L0*L1*L1*x0*cos(q1)*sin(q1)) - (L0*(pow(L1*cos(q1),2) + pow(L1*sin(q1),2) + L0*L0 + x0*x0 + 2*L0*L1*sin(q1) + 2*L1*x0*cos(q1) + 1))/(pow(L1*cos(q1),2) + pow(L1*sin(q1),2) + pow(L1*x0*sin(q1),2) + pow(L0*L1*cos(q1),2) - 2*L0*L1*L1*x0*cos(q1)*sin(q1)));
GerhardBerman 12:05e5964b69a4 192 q2_dotOut = dy*((x0*(L0*L0 + L1*sin(q1)*L0 + x0*x0 + L1*cos(q1)*x0 + 1))/(L1*L1*pow(cos(q1),2) + pow(L1*sin(q1),2) + pow(L1*x0*sin(q1),2) + pow(L0*L1*cos(q1),2) - 2*L0*pow(L1,2)*x0*cos(q1)*sin(q1)) - ((x0 + L1*cos(q1))*(pow(L0,2) + pow(x0,2) + 1))/(pow(L1*cos(q1),2)) + pow(L1*sin(q1),2) + pow(L1*x0*sin(q1),2) + pow(L0*L1*cos(q1),2) - 2*L0*pow(L1,2)*x0*cos(q1)*sin(q1)) - dx*((L0*(L0*L0+L1*sin(q1)*L0+x0*x0+L1*cos(q1)*x0+1))/(pow(L1*cos(q1),2)+pow(L1*sin(q1),2)+pow(L1*x0*sin(q1),2)+pow(L0*L1*cos(q1),2)-2*L0*L1*L1*x0*cos(q1)*sin(q1))-((L0 + L1*sin(q1))*(L0*L0 + x0*x0 + 1))/(pow(L1*cos(q1),2)+pow(L1*sin(q1),2)+pow(L1*x0*sin(q1),2)+pow(L0*L1*cos(q1),2)-2*L0*L1*L1*x0*cos(q1)*sin(q1)));
GerhardBerman 12:05e5964b69a4 193 */
GerhardBerman 8:935abf8ecc27 194 }
GerhardBerman 18:d2cfd07ae88a 195 else if (biceps_l <= 0 && biceps_r > 0){
GerhardBerman 18:d2cfd07ae88a 196 //arm 1 activated, move right
GerhardBerman 18:d2cfd07ae88a 197 //led1 = 0;
GerhardBerman 18:d2cfd07ae88a 198 //led2 = 1;
GerhardBerman 19:cba54636bd62 199 ReferencePosition_xnew = ReferencePosition_x + 0.2; //biceps_r;
GerhardBerman 34:96bcbddc7d2d 200 ReferencePosition_ynew = y_stampup; //ReferencePosition_y;
GerhardBerman 18:d2cfd07ae88a 201 /*PositionError_x = ReferencePosition_x - Position_x; //Position error in dx,dy
GerhardBerman 18:d2cfd07ae88a 202 PositionError_y = ReferencePosition_y - Position_y; //Position error in dx,dy
GerhardBerman 18:d2cfd07ae88a 203
GerhardBerman 18:d2cfd07ae88a 204 dx = PositionError_x;
GerhardBerman 18:d2cfd07ae88a 205 dy = PositionError_y;
GerhardBerman 12:05e5964b69a4 206 q1_dotOut = dy*(((x0 + L1*cos(q1))*(L0*L0 + L1*sin(q1)*L0 + x0*x0 + L1*cos(q1)*x0 + 1))/(pow(L1*cos(q1),2) + pow(L1*sin(q1),2) + pow(L1*x0*sin(q1),2) + pow(L0*L1*cos(q1),2) - 2*L0*L1*L1*x0*cos(q1)*sin(q1)) - (x0*(pow(L1*cos(q1),2) + pow(L1*sin(q1),2) + L0*L0 + x0*x0 + 2*L0*L1*sin(q1) + 2*L1*x0*cos(q1) + 1))/(pow(L1*cos(q1),2) + pow(L1*sin(q1),2) + pow(L1*x0*sin(q1),2) + pow(L0*L1*cos(q1),2) - 2*L0*L1*L1*x0*cos(q1)*sin(q1))) - dx*(((L0 + L1*sin(q1))*(L0*L0 + L1*sin(q1)*L0 + x0*x0 + L1*cos(q1)*x0 + 1))/(pow(L1*cos(q1),2) + pow(L1*sin(q1),2) + pow(L1*x0*sin(q1),2) + pow(L0*L1*cos(q1),2) - 2*L0*L1*L1*x0*cos(q1)*sin(q1)) - (L0*(pow(L1*cos(q1),2) + pow(L1*sin(q1),2) + L0*L0 + x0*x0 + 2*L0*L1*sin(q1) + 2*L1*x0*cos(q1) + 1))/(pow(L1*cos(q1),2) + pow(L1*sin(q1),2) + pow(L1*x0*sin(q1),2) + pow(L0*L1*cos(q1),2) - 2*L0*L1*L1*x0*cos(q1)*sin(q1)));
GerhardBerman 12:05e5964b69a4 207 q2_dotOut = dy*((x0*(L0*L0 + L1*sin(q1)*L0 + x0*x0 + L1*cos(q1)*x0 + 1))/(L1*L1*pow(cos(q1),2) + pow(L1*sin(q1),2) + pow(L1*x0*sin(q1),2) + pow(L0*L1*cos(q1),2) - 2*L0*pow(L1,2)*x0*cos(q1)*sin(q1)) - ((x0 + L1*cos(q1))*(pow(L0,2) + pow(x0,2) + 1))/(pow(L1*cos(q1),2)) + pow(L1*sin(q1),2) + pow(L1*x0*sin(q1),2) + pow(L0*L1*cos(q1),2) - 2*L0*pow(L1,2)*x0*cos(q1)*sin(q1)) - dx*((L0*(L0*L0+L1*sin(q1)*L0+x0*x0+L1*cos(q1)*x0+1))/(pow(L1*cos(q1),2)+pow(L1*sin(q1),2)+pow(L1*x0*sin(q1),2)+pow(L0*L1*cos(q1),2)-2*L0*L1*L1*x0*cos(q1)*sin(q1))-((L0 + L1*sin(q1))*(L0*L0 + x0*x0 + 1))/(pow(L1*cos(q1),2)+pow(L1*sin(q1),2)+pow(L1*x0*sin(q1),2)+pow(L0*L1*cos(q1),2)-2*L0*L1*L1*x0*cos(q1)*sin(q1)));
GerhardBerman 18:d2cfd07ae88a 208 */
GerhardBerman 8:935abf8ecc27 209 }
GerhardBerman 8:935abf8ecc27 210 else{
GerhardBerman 15:9061cf7db23e 211 //led1 = 0;
GerhardBerman 15:9061cf7db23e 212 //led2 = 0;
GerhardBerman 19:cba54636bd62 213 ReferencePosition_xnew = ReferencePosition_x;
GerhardBerman 34:96bcbddc7d2d 214 ReferencePosition_ynew = ReferencePosition_y; //y_stampup;
GerhardBerman 19:cba54636bd62 215 }
GerhardBerman 33:b09608fa69e9 216 // }
GerhardBerman 19:cba54636bd62 217
GerhardBerman 28:6d8c6fe79394 218 float PointPositionArm2_x = ReferencePosition_x;
GerhardBerman 28:6d8c6fe79394 219 float PointPositionArm2_y = ReferencePosition_y - TowerHeight + StampHeight;
GerhardBerman 28:6d8c6fe79394 220 float PointVectorArm2 = sqrt(pow(PointPositionArm2_x,2)+pow(PointPositionArm2_y,2));
GerhardBerman 19:cba54636bd62 221
GerhardBerman 19:cba54636bd62 222 //check position boundaries
GerhardBerman 28:6d8c6fe79394 223 if (PointVectorArm2 > maxStampDistance){
GerhardBerman 34:96bcbddc7d2d 224 ReferencePosition_x = ReferencePosition_x - 0.1;
GerhardBerman 34:96bcbddc7d2d 225 ReferencePosition_y = y_stampup;
GerhardBerman 34:96bcbddc7d2d 226 pc.printf("Target too far! \r\n");
GerhardBerman 19:cba54636bd62 227 }
GerhardBerman 19:cba54636bd62 228 else {
GerhardBerman 19:cba54636bd62 229 ReferencePosition_x = ReferencePosition_xnew;
GerhardBerman 19:cba54636bd62 230 ReferencePosition_y = ReferencePosition_ynew;
11i 20:201175fa8a2a 231 }
GerhardBerman 19:cba54636bd62 232
GerhardBerman 19:cba54636bd62 233 //calculate reference joint angles for the new reference position
GerhardBerman 28:6d8c6fe79394 234 float alpha = atan(PointPositionArm2_y/PointPositionArm2_x);
GerhardBerman 28:6d8c6fe79394 235 float beta = acos((L2*L2-L1*L1-pow(PointVectorArm2,2))/(-2*L1*PointVectorArm2));
GerhardBerman 19:cba54636bd62 236 q1_refOutNew = PI/2 - (alpha+beta);
GerhardBerman 28:6d8c6fe79394 237 q2_refOutNew = PI - asin(PointVectorArm2*sin(beta)/L2);
GerhardBerman 19:cba54636bd62 238
GerhardBerman 19:cba54636bd62 239 //check angle boundaries
GerhardBerman 27:456e8a47f815 240 if (q1_refOutNew > q1_refOutMin && q1_refOutNew < q1_refOutMax){
GerhardBerman 19:cba54636bd62 241 q1_refOut = q1_refOutNew;
GerhardBerman 19:cba54636bd62 242 }
GerhardBerman 19:cba54636bd62 243 else {
GerhardBerman 19:cba54636bd62 244 q1_refOut = q1_refOut;
GerhardBerman 19:cba54636bd62 245 }
GerhardBerman 27:456e8a47f815 246 if (q2_refOutNew > q2_refOutMin && q2_refOutNew < q2_refOutMax){
GerhardBerman 19:cba54636bd62 247 q2_refOut = q2_refOutNew;
GerhardBerman 19:cba54636bd62 248 }
GerhardBerman 19:cba54636bd62 249 else {
GerhardBerman 19:cba54636bd62 250 q2_refOut = q2_refOut;
GerhardBerman 19:cba54636bd62 251 }
GerhardBerman 18:d2cfd07ae88a 252
GerhardBerman 7:2f74dfd1d411 253 //update joint angles
GerhardBerman 18:d2cfd07ae88a 254 //q1Out = q1Out + q1_dotOut; //in radians
GerhardBerman 18:d2cfd07ae88a 255 //q2Out = q2Out + q2_dotOut;
GerhardBerman 12:05e5964b69a4 256
GerhardBerman 34:96bcbddc7d2d 257 pc.baud(115200);
GerhardBerman 34:96bcbddc7d2d 258 pc.printf("refX: %f ",ReferencePosition_xnew);
GerhardBerman 34:96bcbddc7d2d 259 pc.printf("refY: %f ",ReferencePosition_ynew);
GerhardBerman 34:96bcbddc7d2d 260 pc.printf("q1: %f ", q1Out);
GerhardBerman 34:96bcbddc7d2d 261 pc.printf("q1ref: %f ", q1_refOut);
GerhardBerman 34:96bcbddc7d2d 262 pc.printf("q2: %f ", q2Out);
GerhardBerman 34:96bcbddc7d2d 263 pc.printf("q2ref: %f ", q2_refOut);
GerhardBerman 19:cba54636bd62 264
GerhardBerman 18:d2cfd07ae88a 265 /*
GerhardBerman 12:05e5964b69a4 266 pc.printf("dx: %f \r\n", dx);
GerhardBerman 12:05e5964b69a4 267 pc.printf("dy: %f \r\n", dy);
GerhardBerman 12:05e5964b69a4 268 pc.printf("q1: %f \r\n", q1Out);
GerhardBerman 12:05e5964b69a4 269 pc.printf("q1_dot: %f \r\n", q1_dotOut);
GerhardBerman 12:05e5964b69a4 270 pc.printf("q2: %f \r\n", q2Out);
GerhardBerman 12:05e5964b69a4 271 pc.printf("q2_dot: %f \r\n", q2_dotOut);
GerhardBerman 12:05e5964b69a4 272
GerhardBerman 14:725a608b6709 273 pc.printf("Counts1: %f \r\n", counts1);
GerhardBerman 14:725a608b6709 274 pc.printf("Encoder1: %f \r\n", Encoder1Position);
GerhardBerman 18:d2cfd07ae88a 275 pc.printf("Motor1: %f \r\n", q1Out);
GerhardBerman 14:725a608b6709 276 pc.printf("Counts2: %f \r\n", counts2);
GerhardBerman 14:725a608b6709 277 pc.printf("Encoder2: %f \r\n", Encoder2Position);
GerhardBerman 18:d2cfd07ae88a 278 pc.printf("Motor2: %f \r\n", q2Out);
GerhardBerman 18:d2cfd07ae88a 279 */
GerhardBerman 29:caf3dd699617 280
GerhardBerman 7:2f74dfd1d411 281 }
GerhardBerman 18:d2cfd07ae88a 282
GerhardBerman 7:2f74dfd1d411 283
GerhardBerman 24:393da1cc1fa8 284 void FeedbackControl1(float q1_ref, float q2_ref, float q1, float q2, float &motorValue1Out, float &motorValue2Out){
GerhardBerman 7:2f74dfd1d411 285
GerhardBerman 7:2f74dfd1d411 286 // linear feedback control
GerhardBerman 19:cba54636bd62 287 float q1_error = q1_ref - q1; //referencePosition1 - Position1; // proportional angular error in radians
GerhardBerman 19:cba54636bd62 288 float q2_error = q2_ref - q2; //referencePosition1 - Position1; // proportional angular error in radians
GerhardBerman 33:b09608fa69e9 289 float Kp = 3; //potMeter2.read();
GerhardBerman 7:2f74dfd1d411 290
GerhardBerman 19:cba54636bd62 291 float q1IntError = q1IntError + q1_error*t_sample; // integrated error in radians
GerhardBerman 19:cba54636bd62 292 float q2IntError = q2IntError + q2_error*t_sample; // integrated error in radians
GerhardBerman 7:2f74dfd1d411 293 //float maxKi = 0.2;
GerhardBerman 34:96bcbddc7d2d 294 float Ki = 0.04*Kp; //0.01*Kp; //potMeter2.read();
GerhardBerman 7:2f74dfd1d411 295
GerhardBerman 27:456e8a47f815 296 float q1DerivativeError = (q1_error - q1_error_prev)/t_sample; // derivative of error in radians
GerhardBerman 19:cba54636bd62 297 float q2DerivativeError = (q2_error_prev + q2_error)/t_sample; // derivative of error in radians
GerhardBerman 7:2f74dfd1d411 298 //float maxKd = 0.2;
GerhardBerman 33:b09608fa69e9 299 float Kd = 0.0; //0.04*Kp; //potMeter2.read();
GerhardBerman 7:2f74dfd1d411 300
GerhardBerman 7:2f74dfd1d411 301 //scope.set(0,referencePosition1);
GerhardBerman 7:2f74dfd1d411 302 //scope.set(1,Position1);
GerhardBerman 7:2f74dfd1d411 303 //scope.set(2,Ki);
GerhardBerman 7:2f74dfd1d411 304 //scope.send();
GerhardBerman 7:2f74dfd1d411 305
GerhardBerman 23:3a4d5e19c20d 306 TotalError1 = q1_error * Kp + q1IntError * Ki + q1DerivativeError * Kd; //total controller output in radians = motor input
GerhardBerman 23:3a4d5e19c20d 307 TotalError2 = q2_error * Kp + q2IntError * Ki + q2DerivativeError * Kd; //total controller output in radians = motor input
11i 21:dd51d78c0732 308
GerhardBerman 33:b09608fa69e9 309 /*
GerhardBerman 33:b09608fa69e9 310 if (fabs(TotalError1) < TotalErrorMin) {
11i 21:dd51d78c0732 311 TotalError1=0;
11i 21:dd51d78c0732 312 }
11i 21:dd51d78c0732 313 else {
11i 21:dd51d78c0732 314 TotalError1=TotalError1;
11i 21:dd51d78c0732 315 }
GerhardBerman 33:b09608fa69e9 316 if (fabs(TotalError2) < TotalErrorMin) {
11i 21:dd51d78c0732 317 TotalError2=0;
11i 21:dd51d78c0732 318 }
11i 21:dd51d78c0732 319 else {
11i 21:dd51d78c0732 320 TotalError2=TotalError2;
11i 21:dd51d78c0732 321 }
GerhardBerman 33:b09608fa69e9 322 */
GerhardBerman 25:596255732b65 323 /*
GerhardBerman 25:596255732b65 324 DerTotalError1 = (TotalError1 - TotalError1_prev)/t_sample;
GerhardBerman 25:596255732b65 325 DerTotalError1 = (TotalError1 - TotalError1_prev)/t_sample;
GerhardBerman 25:596255732b65 326 motorValue1Out = DerTotalError1/MotorGain;
GerhardBerman 25:596255732b65 327 motorValue2Out = DerTotalError2/MotorGain;
GerhardBerman 25:596255732b65 328 */
GerhardBerman 25:596255732b65 329
11i 21:dd51d78c0732 330 motorValue1Out = TotalError1/MotorGain;
11i 21:dd51d78c0732 331 motorValue2Out = TotalError2/MotorGain;
11i 21:dd51d78c0732 332
GerhardBerman 33:b09608fa69e9 333 /*
GerhardBerman 29:caf3dd699617 334 scope.set(0,q1_ref);
GerhardBerman 29:caf3dd699617 335 scope.set(1,q1);
GerhardBerman 29:caf3dd699617 336 scope.set(2,q2_ref);
GerhardBerman 29:caf3dd699617 337 scope.set(3,q2);
GerhardBerman 29:caf3dd699617 338 scope.set(4,motorValue1Out);
GerhardBerman 29:caf3dd699617 339 scope.set(5,motorValue2Out);
GerhardBerman 29:caf3dd699617 340 scope.send();
GerhardBerman 33:b09608fa69e9 341 */
GerhardBerman 33:b09608fa69e9 342 /*
GerhardBerman 33:b09608fa69e9 343 pc.printf("E1: %f ", q1_error);
GerhardBerman 33:b09608fa69e9 344 pc.printf("IE1: %f ", q1IntError);
GerhardBerman 33:b09608fa69e9 345 pc.printf("DE1: %f ", q2DerivativeError);
GerhardBerman 33:b09608fa69e9 346 pc.printf("E2: %f ", q2_error);
GerhardBerman 33:b09608fa69e9 347 pc.printf("IE2: %f ", q2IntError);
GerhardBerman 33:b09608fa69e9 348 pc.printf("DE2: %f ", q2DerivativeError);
GerhardBerman 34:96bcbddc7d2d 349 */
GerhardBerman 33:b09608fa69e9 350 pc.printf("TE1: %f ", TotalError1);
GerhardBerman 33:b09608fa69e9 351 pc.printf("TE2: %f ", TotalError2);
GerhardBerman 33:b09608fa69e9 352 pc.printf("M1: %f ", motorValue1Out);
GerhardBerman 33:b09608fa69e9 353 pc.printf("M2: %f \r\n", motorValue2Out);
GerhardBerman 34:96bcbddc7d2d 354
GerhardBerman 19:cba54636bd62 355 q1_error_prev = q1_error;
GerhardBerman 19:cba54636bd62 356 q2_error_prev = q2_error;
GerhardBerman 25:596255732b65 357 TotalError1_prev = TotalError1;
GerhardBerman 33:b09608fa69e9 358 TotalError2_prev = TotalError2;
GerhardBerman 3:8caef4872b0c 359 }
GerhardBerman 3:8caef4872b0c 360
GerhardBerman 9:e4c34f5665a0 361 void SetMotor1(float motorValue1, float motorValue2)
GerhardBerman 3:8caef4872b0c 362 {
GerhardBerman 3:8caef4872b0c 363 // Given -1<=motorValue<=1, this sets the PWM and direction
GerhardBerman 3:8caef4872b0c 364 // bits for motor 1. Positive value makes motor rotating
GerhardBerman 3:8caef4872b0c 365 // clockwise. motorValues outside range are truncated to
GerhardBerman 3:8caef4872b0c 366 // within range
GerhardBerman 9:e4c34f5665a0 367 //control motor 1
GerhardBerman 15:9061cf7db23e 368 if (motorValue1 >=0) //clockwise rotation
GerhardBerman 19:cba54636bd62 369 {motor1DirectionPin=cw; //inverted due to opposite (to other motor) build-up in tower
GerhardBerman 9:e4c34f5665a0 370 //led1=1;
GerhardBerman 9:e4c34f5665a0 371 //led2=0;
GerhardBerman 3:8caef4872b0c 372 }
GerhardBerman 15:9061cf7db23e 373 else //counterclockwise rotation
GerhardBerman 19:cba54636bd62 374 {motor1DirectionPin=ccw; //inverted due to opposite (to other motor) build-up in tower
GerhardBerman 9:e4c34f5665a0 375 //led1=0;
GerhardBerman 9:e4c34f5665a0 376 //led2=1;
GerhardBerman 3:8caef4872b0c 377 }
GerhardBerman 29:caf3dd699617 378 if (fabs(motorValue1)>1){
GerhardBerman 29:caf3dd699617 379 motor1MagnitudePin = 1;
GerhardBerman 29:caf3dd699617 380 }
GerhardBerman 29:caf3dd699617 381 else{
GerhardBerman 29:caf3dd699617 382 motor1MagnitudePin = fabs(motorValue1); //fabs(motorValue1);
GerhardBerman 29:caf3dd699617 383 }
GerhardBerman 29:caf3dd699617 384
GerhardBerman 9:e4c34f5665a0 385 //control motor 2
GerhardBerman 15:9061cf7db23e 386 if (motorValue2 >=0) //clockwise rotation
GerhardBerman 14:725a608b6709 387 {motor2DirectionPin=ccw; //action is cw, due to faulty motor2DirectionPin (inverted)
GerhardBerman 10:45473f650198 388 //led1=1;
GerhardBerman 10:45473f650198 389 //led2=0;
GerhardBerman 7:2f74dfd1d411 390 }
GerhardBerman 15:9061cf7db23e 391 else //counterclockwise rotation
GerhardBerman 15:9061cf7db23e 392 {motor2DirectionPin=cw; //action is ccw, due to faulty motor2DirectionPin (inverted)
GerhardBerman 10:45473f650198 393 //led1=0;
GerhardBerman 10:45473f650198 394 //led2=1;
GerhardBerman 7:2f74dfd1d411 395 }
GerhardBerman 29:caf3dd699617 396 if (fabs(motorValue2)>1){
GerhardBerman 29:caf3dd699617 397 motor2MagnitudePin = 1;
GerhardBerman 29:caf3dd699617 398 }
GerhardBerman 29:caf3dd699617 399 else{
GerhardBerman 29:caf3dd699617 400 motor2MagnitudePin = fabs(motorValue2);
GerhardBerman 29:caf3dd699617 401 }
GerhardBerman 19:cba54636bd62 402 float ReadMagn1 = motor1MagnitudePin.read();
GerhardBerman 19:cba54636bd62 403 float ReadMagn2 = motor2MagnitudePin.read();
GerhardBerman 33:b09608fa69e9 404 //pc.printf("motor1Magnitude: %f \r\n", ReadMagn1);
GerhardBerman 33:b09608fa69e9 405 //pc.printf("motor2Magnitude: %f \r\n", ReadMagn2);
GerhardBerman 3:8caef4872b0c 406 }
GerhardBerman 3:8caef4872b0c 407
GerhardBerman 3:8caef4872b0c 408 void MeasureAndControl()
GerhardBerman 3:8caef4872b0c 409 {
GerhardBerman 9:e4c34f5665a0 410 // This function measures the EMG of both arms, calculates via IK what
GerhardBerman 24:393da1cc1fa8 411 // the joint positions should be, and controls the motor with
GerhardBerman 24:393da1cc1fa8 412 // a Feedback controller. This is called from a Ticker.
GerhardBerman 19:cba54636bd62 413 GetReferenceKinematics1(q1, q2, q1_ref, q2_ref);
GerhardBerman 24:393da1cc1fa8 414 FeedbackControl1( q1_ref, q2_ref, q1, q2, motorValue1, motorValue2);
GerhardBerman 9:e4c34f5665a0 415 SetMotor1(motorValue1, motorValue2);
GerhardBerman 3:8caef4872b0c 416 }
GerhardBerman 3:8caef4872b0c 417
GerhardBerman 3:8caef4872b0c 418 void TimeTrackerF(){
GerhardBerman 3:8caef4872b0c 419 //wait(1);
GerhardBerman 3:8caef4872b0c 420 //float Potmeter1 = potMeter1.read();
GerhardBerman 7:2f74dfd1d411 421 //float referencePosition1 = GetReferencePosition();
GerhardBerman 7:2f74dfd1d411 422 //pc.printf("TTReference Position: %d rad \r\n", referencePosition1);
GerhardBerman 3:8caef4872b0c 423 //pc.printf("TTPotmeter1, for refpos: %f \r\n", Potmeter1);
GerhardBerman 3:8caef4872b0c 424 //pc.printf("TTPotmeter2, Kp: %f \r\n", Potmeter2);
GerhardBerman 7:2f74dfd1d411 425 //pc.printf("TTCounts: %i \r\n", counts1);
GerhardBerman 3:8caef4872b0c 426 }
GerhardBerman 7:2f74dfd1d411 427
GerhardBerman 3:8caef4872b0c 428 /*
GerhardBerman 3:8caef4872b0c 429 void BiQuadFilter(){ //this function creates a BiQuad filter for the DerivativeCounts
GerhardBerman 3:8caef4872b0c 430 //double in=DerivativeCounts();
GerhardBerman 3:8caef4872b0c 431 bqcDerivativeCounts=bqc.step(DerivativeCounts);
GerhardBerman 3:8caef4872b0c 432 //return(bqcDerivativeCounts);
GerhardBerman 3:8caef4872b0c 433 }
GerhardBerman 9:e4c34f5665a0 434 */
GerhardBerman 6:3c4f3f2ce54f 435
GerhardBerman 0:43160ef59f9f 436 int main()
GerhardBerman 0:43160ef59f9f 437 {
GerhardBerman 0:43160ef59f9f 438 //Initialize
GerhardBerman 15:9061cf7db23e 439 //int led1val = led1.read();
GerhardBerman 15:9061cf7db23e 440 //int led2val = led2.read();
GerhardBerman 34:96bcbddc7d2d 441 pc.baud(115200);
GerhardBerman 34:96bcbddc7d2d 442 pc.printf("Test putty IK");
GerhardBerman 34:96bcbddc7d2d 443 MeasureTicker.attach(&MeasureTicker_act, 0.1f);
GerhardBerman 10:45473f650198 444 bqc.add(&bq1).add(&bq2);
GerhardBerman 10:45473f650198 445
GerhardBerman 0:43160ef59f9f 446 while(1)
GerhardBerman 0:43160ef59f9f 447 {
GerhardBerman 3:8caef4872b0c 448 if (MeasureTicker_go){
GerhardBerman 3:8caef4872b0c 449 MeasureTicker_go=false;
GerhardBerman 33:b09608fa69e9 450 ledgrn = 1;
GerhardBerman 33:b09608fa69e9 451 ledblue = 0;
GerhardBerman 3:8caef4872b0c 452 MeasureAndControl();
GerhardBerman 15:9061cf7db23e 453 counts1 = Encoder1.getPulses(); // gives position of encoder
GerhardBerman 15:9061cf7db23e 454 counts2 = Encoder2.getPulses(); // gives position of encoder
GerhardBerman 33:b09608fa69e9 455 //pc.printf("counts1: %i ", counts1);
GerhardBerman 33:b09608fa69e9 456 //pc.printf("counts2: %i \r\n", counts2);
GerhardBerman 33:b09608fa69e9 457 ledblue = 1;
GerhardBerman 33:b09608fa69e9 458 ledgrn = 0;
GerhardBerman 3:8caef4872b0c 459 }
GerhardBerman 10:45473f650198 460 /*
GerhardBerman 3:8caef4872b0c 461 if (BiQuadTicker_go){
GerhardBerman 3:8caef4872b0c 462 BiQuadTicker_go=false;
GerhardBerman 3:8caef4872b0c 463 BiQuadFilter();
GerhardBerman 3:8caef4872b0c 464 }
GerhardBerman 10:45473f650198 465 */
GerhardBerman 0:43160ef59f9f 466 }
GerhardBerman 0:43160ef59f9f 467 }