Diff: app_config.h

Revision:

1:af9efbb9e9c5

diff -r 782471fb58f7 -r af9efbb9e9c5 app_config.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/app_config.h	Wed Aug 28 15:38:19 2019 +0000
@@ -0,0 +1,122 @@
+/*************************************************************************//**
+ *   @file   app_config.h
+ *   @brief  Configuration file of AD5686 firmware example program
+ *   @author ssmith (sean.smith@analog.com)
+******************************************************************************
+* Copyright (c) 2019 Analog Devices, Inc.  
+* 
+* All rights reserved.
+* 
+* Redistribution and use in source and binary forms, with or without 
+* modification, are permitted provided that the following conditions are met:
+*   - Redistributions of source code must retain the above copyright notice, 
+*     this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright notice, 
+*     this list of conditions and the following disclaimer in the documentation 
+*     and/or other materials provided with the distribution.  
+*   - Modified versions of the software must be conspicuously marked as such.
+*   - This software is licensed solely and exclusively for use with 
+*     processors/products manufactured by or for Analog Devices, Inc.
+*   - This software may not be combined or merged with other code in any manner 
+*     that would cause the software to become subject to terms and 
+*     conditions which differ from those listed here.
+*   - Neither the name of Analog Devices, Inc. nor the names of its 
+*     contributors may be used to endorse or promote products derived 
+*     from this software without specific prior written permission.
+*   - The use of this software may or may not infringe the patent rights 
+*     of one or more patent holders. This license does not release you from 
+*     the requirement that you obtain separate licenses from these patent 
+*     holders to use this software.
+* 
+* THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. AND CONTRIBUTORS "AS IS" 
+* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 
+* NON-INFRINGEMENT, TITLE, MERCHANTABILITY AND FITNESS FOR A 
+* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES, 
+* INC. OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+* SPECIAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES 
+* (INCLUDING, BUT NOT LIMITED TO, DAMAGES ARISING OUT OF CLAIMS OF 
+* INTELLECTUAL PROPERTY RIGHTS INFRINGEMENT; PROCUREMENT OF SUBSTITUTE 
+* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
+* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
+* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 
+* POSSIBILITY OF SUCH DAMAGE.
+* 
+* 20180927-7CBSD SLA
+*****************************************************************************/
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+#include <stdint.h>
+#include "PinNames.h"
+
+#include "platform_drivers.h"
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+#ifdef __cplusplus
+#include "adt7420.h"
+}
+#endif
+
+
+#ifndef ACTIVE_DEVICE
+/** 
+   #define your chosen device here from the 
+   adt7420_type (adt7420.h) enum
+*/
+#define ACTIVE_DEVICE ID_ADT7320
+#endif // !
+
+/**
+   ADT7420 is a 7-bit I2C address 
+   MBED API uses 8-bit addresses
+*/
+#define EXTERNAL_I2C  0x49<<1
+#define INTERNAL_I2C  0x48<<1
+
+/**
+   ChipSelect index definition for 
+   PinName array in main.cpp
+*/
+#define EXTERNAL_SPI 1
+#define INTERNAL_SPI 0
+
+/**
+  The ADI SDP_K1 can be used with both arduino headers
+  or the 120-pin SDP connector found on ADI evaluation
+  boards. The default is the SDP connector
+
+  Uncomment the ARDUINO #define above to enable the ARDUINO connector
+*/
+
+#define  ARDUINO
+
+#ifdef ARDUINO
+	#define I2C_SCL     D15
+	#define I2C_SDA     D14
+
+	#define SPI_CS		D10
+	#define SPI_MISO	D12
+	#define SPI_MOSI	D11
+	#define SPI_SCK		D13
+
+	#define SPI_CSE 	D9 
+	
+#else
+	
+	#define I2C_SCL     SDP_I2C_SCL
+	#define I2C_SDA     SDP_I2C_SDA
+
+	#define SPI_CS		SDP_SPI_CS_A
+	#define SPI_MISO	SDP_SPI_MISO
+	#define SPI_MOSI	SDP_SPI_MOSI
+	#define SPI_SCK		SDP_SPI_SCK
+
+	#define SPI_CSE 	SDP_SPI_CS_B
+	
+#endif
+
+#endif //_APP_CONFIG_H_
\ No newline at end of file