File content as of revision 1:af9efbb9e9c5:

/*************************************************************************//**
 *   @file   app_config.h
 *   @brief  Configuration file of AD5686 firmware example program
 *   @author ssmith (sean.smith@analog.com)
******************************************************************************
* Copyright (c) 2019 Analog Devices, Inc.  
* 
* All rights reserved.
* 
* Redistribution and use in source and binary forms, with or without 
* modification, are permitted provided that the following conditions are met:
*   - Redistributions of source code must retain the above copyright notice, 
*     this list of conditions and the following disclaimer.
*   - Redistributions in binary form must reproduce the above copyright notice, 
*     this list of conditions and the following disclaimer in the documentation 
*     and/or other materials provided with the distribution.  
*   - Modified versions of the software must be conspicuously marked as such.
*   - This software is licensed solely and exclusively for use with 
*     processors/products manufactured by or for Analog Devices, Inc.
*   - This software may not be combined or merged with other code in any manner 
*     that would cause the software to become subject to terms and 
*     conditions which differ from those listed here.
*   - Neither the name of Analog Devices, Inc. nor the names of its 
*     contributors may be used to endorse or promote products derived 
*     from this software without specific prior written permission.
*   - The use of this software may or may not infringe the patent rights 
*     of one or more patent holders. This license does not release you from 
*     the requirement that you obtain separate licenses from these patent 
*     holders to use this software.
* 
* THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. AND CONTRIBUTORS "AS IS" 
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 
* NON-INFRINGEMENT, TITLE, MERCHANTABILITY AND FITNESS FOR A 
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES, 
* INC. OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
* SPECIAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES 
* (INCLUDING, BUT NOT LIMITED TO, DAMAGES ARISING OUT OF CLAIMS OF 
* INTELLECTUAL PROPERTY RIGHTS INFRINGEMENT; PROCUREMENT OF SUBSTITUTE 
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 
* POSSIBILITY OF SUCH DAMAGE.
* 
* 20180927-7CBSD SLA
*****************************************************************************/

#ifndef _APP_CONFIG_H_
#define _APP_CONFIG_H_

#include <stdint.h>
#include "PinNames.h"

#include "platform_drivers.h"
#ifdef __cplusplus
extern "C"
{
#endif
#ifdef __cplusplus
#include "adt7420.h"
}
#endif


#ifndef ACTIVE_DEVICE
/** 
   #define your chosen device here from the 
   adt7420_type (adt7420.h) enum
*/
#define ACTIVE_DEVICE ID_ADT7320
#endif // !

/**
   ADT7420 is a 7-bit I2C address 
   MBED API uses 8-bit addresses
*/
#define EXTERNAL_I2C  0x49<<1
#define INTERNAL_I2C  0x48<<1

/**
   ChipSelect index definition for 
   PinName array in main.cpp
*/
#define EXTERNAL_SPI 1
#define INTERNAL_SPI 0

/**
  The ADI SDP_K1 can be used with both arduino headers
  or the 120-pin SDP connector found on ADI evaluation
  boards. The default is the SDP connector

  Uncomment the ARDUINO #define above to enable the ARDUINO connector
*/

#define  ARDUINO

#ifdef ARDUINO
	#define I2C_SCL     D15
	#define I2C_SDA     D14

	#define SPI_CS		D10
	#define SPI_MISO	D12
	#define SPI_MOSI	D11
	#define SPI_SCK		D13

	#define SPI_CSE 	D9 
	
#else
	
	#define I2C_SCL     SDP_I2C_SCL
	#define I2C_SDA     SDP_I2C_SDA

	#define SPI_CS		SDP_SPI_CS_A
	#define SPI_MISO	SDP_SPI_MISO
	#define SPI_MOSI	SDP_SPI_MOSI
	#define SPI_SCK		SDP_SPI_SCK

	#define SPI_CSE 	SDP_SPI_CS_B
	
#endif

#endif //_APP_CONFIG_H_