MAX30001-MAX32630FTHR SYS EvKit

Dependencies:   USBDevice max32630fthr

Max30001 EVKIT Summary

The MAX30001 EVKIT SYS-MBED Evaluation System (EV System) is used to evaluates the MAX30001 sensor, which is an ECG (electrocardiogram), biopotential and bioimpedance analog front end solution for wearable applications. The full EV System consists of the MAX32630FTHR Development board (DEV board) and MAX30001 sensor board and the evaluation software. The EvKit features EKG, PACE, RtoR (R-peak timing), Bio-Z, and raw data logging.

The MAX30001 EVKIT SYS-MBED evaluation system is assembled, tested and contains the necessary circuitry and connections to evaluate the MAX30001 sensor.

When evaluated as an EV System, the MAX32630FTHR board provides the necessary logic rails, master clock, SPI, USB-to-Serial interfaces that are needed to evaluate the MAX30001 sensor board. MAX32630FTHR can be used as an independent development platform. Another wiki page for that platform is available here.

Communication with the DEV board is facilitated by Windows 7, Windows 8 and Windows 10 compatible software that provides a simple and intuitive graphical user interface (GUI).

HSP/RpcServer/RpcFifo.h

Committer:
Emre.Eken
Date:
2018-04-12
Revision:
2:e2ce56bb0d2e
Parent:
0:8e4630a71eb1

File content as of revision 2:e2ce56bb0d2e:

/*******************************************************************************
 * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included
 * in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
 * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
 * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 * OTHER DEALINGS IN THE SOFTWARE.
 *
 * Except as contained in this notice, the name of Maxim Integrated
 * Products, Inc. shall not be used except as stated in the Maxim Integrated
 * Products, Inc. Branding Policy.
 *
 * The mere transfer of this software does not imply any licenses
 * of trade secrets, proprietary technology, copyrights, patents,
 * trademarks, maskwork rights, or any other form of intellectual
 * property whatsoever. Maxim Integrated Products, Inc. retains all
 * ownership rights.
 *
 ********************************************************************************
 */
#ifndef _RPCFIFO_H_
#define _RPCFIFO_H_

#include <stdint.h>

/// Structure used for FIFO management
typedef struct {
  unsigned int length; ///< FIFO size (number of elements)
  void *data;          ///< pointer to the FIFO buffer
  unsigned int rindex; ///< current FIFO read index
  unsigned int windex; ///< current FIFO write index
} fifo_t;

/**
* @param    fifo     FIFO on which to perform the operation
* @param    mem      memory buffer to use for FIFO element storage
* @param    length   number of elements that the memory buffer can contain
* @returns  0 if successful, -1 upon failure
*/
void fifo_init(fifo_t *fifo, void *mem, unsigned int length);

/**
* @brief    Adds and 8-bit element to the FIFO
* @param    fifo     FIFO on which to perform the operation
* @param    element  element to add to the FIFO
* @returns  0 if successful, -1 upon failure
*/
int fifo_put8(fifo_t *fifo, uint8_t element);

/**
* @brief    Gets the next 8-bit element to the FIFO
* @param    fifo     FIFO on which to perform the operation
* @param    element  pointer to where to store the element from the FIFO
* @returns  0 if successful, -1 upon failure
*/
int fifo_get8(fifo_t *fifo, uint8_t *element);

/**
* @brief    Adds the next 16-bit element to the FIFO
* @param    fifo     FIFO on which to perform the operation
* @param    element  element to add to the FIFO
* @returns  0 if successful, -1 upon failure
*/
int fifo_put16(fifo_t *fifo, uint16_t element);

/**
* @brief    Gets the next 16-bit element to the FIFO
* @param    fifo     FIFO on which to perform the operation
* @param    element  pointer to where to store the element from the FIFO
* @returns  0 if successful, -1 upon failure
*/
int fifo_get16(fifo_t *fifo, uint16_t *element);

/**
* @brief    Adds the next 16-bit element to the FIFO
* @param    fifo     FIFO on which to perform the operation
* @param    element  element to add to the FIFO
* @returns  0 if successful, -1 upon failure
*/
int fifo_put32(fifo_t *fifo, uint32_t element);

/**
* @brief    Gets the next 16-bit element to the FIFO
* @param    fifo     FIFO on which to perform the operation
* @param    element  pointer to where to store the element from the FIFO
* @returns  0 if successful, -1 upon failure
*/
int fifo_get32(fifo_t *fifo, uint32_t *element);

/**
* @brief    Immediately resets the FIFO to the empty state
* @param    fifo   FIFO on which to perform the operation
*/
void fifo_clear(fifo_t *fifo);

/**
* @brief    Determines if the FIFO is empty
* @param    fifo   FIFO on which to perform the operation
* @returns  #TRUE if FIFO is empty, #FALSE otherwise
*/
int fifo_empty(fifo_t *fifo);

/**
* @brief    FIFO status function
* @param    fifo   FIFO on which to perform the operation
* @returns  #TRUE if FIFO is full, #FALSE otherwise
*/
int fifo_full(fifo_t *fifo);

/**
* @brief    FIFO status function
* @param    fifo   FIFO on which to perform the operation
* @returns  the number of elements currently in the FIFO
*/
unsigned int fifo_level(fifo_t *fifo);

/**
* @brief    FIFO status function
* @param    fifo   FIFO on which to perform the operation
* @returns  the remaining elements that can be added to the FIFO
*/
unsigned int fifo_remaining(fifo_t *fifo);

#endif // _RPCFIFO_H_