![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
mbed project
Dependencies: ESP8266NodeMCUInterface Pubnub_mbed2_sync mbed
pubnub_config.h
- Committer:
- ECE4180
- Date:
- 2017-04-11
- Revision:
- 0:2730fbdae986
File content as of revision 0:2730fbdae986:
/* -*- c-file-style:"stroustrup"; indent-tabs-mode: nil -*- */ #if !defined INC_PUBNUB_CONFIG #define INC_PUBNUB_CONFIG /* -- Next few definitions can be tweaked by the user, but with care -- */ /** Maximum number of PubNub contexts. It is used only if the * contexts are statically allocated. * A context is used to publish messages or subscribe to (get) them. * * Doesn't make much sense to have less than 1. :) * OTOH, don't put too many, as each context takes (for our purposes) * a significant amount of memory - app. 128 + @ref PUBNUB_BUF_MAXLEN + * @ref PUBNUB_REPLY_MAXLEN bytes. * * A typical configuration may consist of a single pubnub context for * channel subscription and another pubnub context that will periodically * publish messages about device status (with timeout lower than message * generation frequency). * * Another typical setup may have a single subscription context and * maintain a pool of contexts for each publish call triggered by an * external event (e.g. a button push). * * Of course, there is nothing wrong with having just one context, but * you can't publish and subscribe at the same time on the same context. * This isn't as bad as it sounds, but may be a source of headaches * (lost messages, etc). */ #define PUBNUB_CTX_MAX 2 /** Maximum length of the HTTP buffer. This is a major component of * the memory size of the whole pubnub context, but it is also an * upper bound on URL-encoded form of published message, so if you * need to construct big messages, you may need to raise this. */ #define PUBNUB_BUF_MAXLEN 32000 /** Set to 0 to use a static buffer and then set its size via #PUBNUB_REPLY_MAXLEN. Set to anything !=0 to use a dynamic buffer, that is, dynamically try to allocate as much memory as needed for the buffer. */ #define PUBNUB_DYNAMIC_REPLY_BUFFER 1 #if !PUBNUB_DYNAMIC_REPLY_BUFFER /** Maximum length of the HTTP reply when using a static buffer. The * other major component of the memory size of the PubNub context, * beside #PUBNUB_BUF_MAXLEN. Replies of API calls longer than this * will be discarded and an error will be reported. Specifically, this * may cause lost messages returned by subscribe if too many too large * messages got queued on the Pubnub server. */ #define PUBNUB_REPLY_MAXLEN 32000 #endif /** This is the URL of the Pubnub server. Change only for testing purposes. */ #define PUBNUB_ORIGIN "pubsub.pubnub.com" /** Set to 0 to disable changing the origin from the default #PUBNUB_ORIGIN. Set to anything != 0 to enable changing the origin (per context). */ #define PUBNUB_ORIGIN_SETTABLE 1 /** Duration of the transaction timeout set during context initialization, in milliseconds. Can be changed later by the user. */ #define PUBNUB_DEFAULT_TRANSACTION_TIMER 310000 #define PUBNUB_HAVE_MD5 0 #define PUBNUB_HAVE_SHA1 0 /** The size of the stack (in kilobytes) for the "polling" thread, when using the callback interface. We don't need much, so, if you want to conserve memory, you can try small values. It's hard to say what is the minumum, as it depends on the OS functions we call, but, you probably shouldn't try less than 64 KB. Set to `0` to use the default stack size. */ #define PUBNUB_CALLBACK_THREAD_STACK_SIZE_KB 0 /** If true (!=0), enable support for (HTTP/S) proxy */ #define PUBNUB_PROXY_API 0 /** The maximum length (in characters) of the host name of the proxy that will be saved in the Pubnub context. */ #define PUBNUB_MAX_PROXY_HOSTNAME_LENGTH 63 /** If true (!=0), enable support for message encryption/decryption */ #define PUBNUB_CRYPTO_API 0 #include <mbed.h> extern Serial pc; #define PUBNUB_LOG_PRINTF(...) pc.printf(__VA_ARGS__) #endif /* !defined INC_PUBNUB_CONFIG */