Deepti AST
Environmental Shield API
Diff: BSP/Nucleo-F401RE/nucleo-f401re.h
- Revision:
- 0:9e645e6ed2ce
diff -r 000000000000 -r 9e645e6ed2ce BSP/Nucleo-F401RE/nucleo-f401re.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP/Nucleo-F401RE/nucleo-f401re.h Tue Aug 19 07:13:15 2014 +0000
@@ -0,0 +1,324 @@
+/**
+ ******************************************************************************
+ * @file nucleo-f401re.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 22-April-2014
+ * @brief This file contains definitions for:
+ * - LEDs and push-button available on NUCLEO-F401RE Kit
+ * from STMicroelectronics
+ * - LCD, joystick and microSD available on Adafruit 1.8" TFT LCD
+ * shield (reference ID 802)
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __NUCLEO_F401RE_H
+#define __NUCLEO_F401RE_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup NUCLEO_F401RE
+ * @{
+ */
+
+/** @addtogroup NUCLEO_F401RE_LOW_LEVEL
+ * @{
+ */
+
+/** @defgroup NUCLEO_F401RE_LOW_LEVEL_Exported_Types
+ * @{
+ */
+
+
+typedef enum
+{
+ BUTTON_KEY = 0
+} Button_TypeDef;
+
+typedef enum
+{
+ BUTTON_MODE_GPIO = 0,
+ BUTTON_MODE_EXTI = 1
+} ButtonMode_TypeDef;
+
+typedef enum
+{
+ JOY_NONE = 0,
+ JOY_SEL = 1,
+ JOY_DOWN = 2,
+ JOY_LEFT = 3,
+ JOY_RIGHT = 4,
+ JOY_UP = 5
+} JOYState_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup NUCLEO_F401RE_LOW_LEVEL_Exported_Constants
+ * @{
+ */
+
+/**
+* @brief Define for NUCLEO_F401RE board
+ */
+#if !defined (USE_NUCLEO_F401RE)
+ #define USE_NUCLEO_F401RE
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup NUCLEO_F401RE_LOW_LEVEL_LED
+ * @{
+ */
+#define LEDn 1
+
+#define LED2_PIN GPIO_PIN_5
+#define LED2_GPIO_PORT GPIOA
+#define LED2_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
+#define LED2_GPIO_CLK_DISABLE() __GPIOA_CLK_DISABLE()
+
+#define LEDx_GPIO_CLK_ENABLE(__INDEX__) (((__INDEX__) == 0) ? LED2_GPIO_CLK_ENABLE() : 0)
+#define LEDx_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? LED2_GPIO_CLK_DISABLE() : 0)
+/**
+ * @}
+ */
+
+/** @addtogroup NUCLEO_F401RE_LOW_LEVEL_BUTTON
+ * @{
+ */
+#define BUTTONn 1
+
+/**
+ * @brief Key push-button
+ */
+#define KEY_BUTTON_PIN GPIO_PIN_13
+#define KEY_BUTTON_GPIO_PORT GPIOC
+#define KEY_BUTTON_GPIO_CLK_ENABLE() __GPIOC_CLK_ENABLE()
+#define KEY_BUTTON_GPIO_CLK_DISABLE() __GPIOC_CLK_DISABLE()
+#define KEY_BUTTON_EXTI_LINE GPIO_PIN_13
+#define KEY_BUTTON_EXTI_IRQn EXTI15_10_IRQn
+//EXTI4_15_IRQn
+
+#define BUTTONx_GPIO_CLK_ENABLE(__INDEX__) (((__INDEX__) == 0) ? KEY_BUTTON_GPIO_CLK_ENABLE() : 0)
+#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? KEY_BUTTON_GPIO_CLK_DISABLE() : 0)
+/**
+ * @}
+ */
+
+/** @addtogroup NUCLEO_F401RE_LOW_LEVEL_BUS
+ * @{
+ */
+/*###################### SPI1 ###################################*/
+//#define NUCLEO_SPIx SPI1
+//#define NUCLEO_SPIx_CLK_ENABLE() __SPI1_CLK_ENABLE()
+//
+//#define NUCLEO_SPIx_SCK_AF GPIO_AF0_SPI1
+//#define NUCLEO_SPIx_SCK_GPIO_PORT GPIOA
+//#define NUCLEO_SPIx_SCK_PIN GPIO_PIN_5
+//#define NUCLEO_SPIx_SCK_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
+//#define NUCLEO_SPIx_SCK_GPIO_CLK_DISABLE() __GPIOA_CLK_DISABLE()
+//
+//#define NUCLEO_SPIx_MISO_MOSI_AF GPIO_AF0_SPI1
+//#define NUCLEO_SPIx_MISO_MOSI_GPIO_PORT GPIOA
+//#define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
+//#define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_DISABLE() __GPIOA_CLK_DISABLE()
+//#define NUCLEO_SPIx_MISO_PIN GPIO_PIN_6
+//#define NUCLEO_SPIx_MOSI_PIN GPIO_PIN_7
+///* Maximum Timeout values for flags waiting loops. These timeouts are not based
+// on accurate values, they just guarantee that the application will not remain
+// stuck if the SPI communication is corrupted.
+// You may modify these timeout values depending on CPU frequency and application
+// conditions (interrupts routines ...). */
+//#define NUCLEO_SPIx_TIMEOUT_MAX 1000
+
+
+/**
+ * @brief Definition for I2C_ONBOARD_SENSORS port, connected to I2C3
+ */
+
+/* I2C clock speed configuration (in Hz) */
+#ifndef NUCLEO_I2C_SHIELDS_SPEED
+ #define NUCLEO_I2C_SHIELDS_SPEED 100000
+#endif /* I2C_ONBOARD_SENSORS_SPEED */
+
+/* I2C peripheral configuration defines (control interface of the audio codec) */
+#define NUCLEO_I2C_SHIELDS I2C1
+#define NUCLEO_I2C_SHIELDS_CLK_ENABLE() __I2C1_CLK_ENABLE()
+#define NUCLEO_I2C_SHIELDS_SCL_SDA_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE()
+#define NUCLEO_I2C_SHIELDS_SCL_SDA_AF GPIO_AF4_I2C1
+#define NUCLEO_I2C_SHIELDS_SCL_SDA_GPIO_PORT GPIOB
+#define NUCLEO_I2C_SHIELDS_SCL_PIN GPIO_PIN_8
+#define NUCLEO_I2C_SHIELDS_SDA_PIN GPIO_PIN_9
+
+#define NUCLEO_I2C_SHIELDS_FORCE_RESET() __I2C1_FORCE_RESET()
+#define NUCLEO_I2C_SHIELDS_RELEASE_RESET() __I2C1_RELEASE_RESET()
+
+/* I2C interrupt requests */
+#define NUCLEO_I2C_SHIELDS_EV_IRQn I2C1_EV_IRQn
+#define NUCLEO_I2C_SHIELDS_ER_IRQn I2C1_ER_IRQn
+
+//#define NUCLEO_I2C_SHIELDS_MUTEX I2C1_Mutex_id
+//#define NUCLEO_I2C_SHIELDS_MUTEX_TAKE() osMutexWait(NUCLEO_I2C_SHIELDS_MUTEX, 0)
+//#define NUCLEO_I2C_SHIELDS_MUTEX_RELEASE() osMutexRelease(NUCLEO_I2C_SHIELDS_MUTEX)
+
+/* Maximum Timeout values for flags waiting loops. These timeouts are not based
+ on accurate values, they just guarantee that the application will not remain
+ stuck if the SPI communication is corrupted.
+ You may modify these timeout values depending on CPU frequency and application
+ conditions (interrupts routines ...). */
+#define NUCLEO_I2C_SHIELDS_TIMEOUT_MAX 0x1000 /*<! The value of the maximal timeout for BUS waiting loops */
+
+/** @addtogroup NUCLEO_F401RE_LOW_LEVEL_COMPONENT
+ * @{
+ */
+
+/**
+ * @brief SD Control Lines management
+ */
+#define SD_CS_LOW() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_RESET)
+#define SD_CS_HIGH() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_SET)
+
+/**
+ * @brief LCD Control Lines management
+ */
+#define LCD_CS_LOW() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_RESET)
+#define LCD_CS_HIGH() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_SET)
+#define LCD_DC_LOW() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_RESET)
+#define LCD_DC_HIGH() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_SET)
+
+/**
+ * @brief SD Control Interface pins
+ */
+#define SD_CS_PIN GPIO_PIN_5
+#define SD_CS_GPIO_PORT GPIOB
+#define SD_CS_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE()
+#define SD_CS_GPIO_CLK_DISABLE() __GPIOB_CLK_DISABLE()
+
+/**
+ * @brief LCD Control Interface pins
+ */
+#define LCD_CS_PIN GPIO_PIN_6
+#define LCD_CS_GPIO_PORT GPIOB
+#define LCD_CS_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE()
+#define LCD_CS_GPIO_CLK_DISABLE() __GPIOB_CLK_DISABLE()
+
+/**
+ * @brief LCD Data/Command Interface pins
+ */
+#define LCD_DC_PIN GPIO_PIN_9
+#define LCD_DC_GPIO_PORT GPIOA
+#define LCD_DC_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
+#define LCD_DC_GPIO_CLK_DISABLE() __GPIOA_CLK_DISABLE()
+
+/*##################### ADC1 ###################################*/
+/**
+ * @brief ADC Interface pins
+ * used to detect motion of Joystick available on Adafruit 1.8" TFT shield
+ */
+#define NUCLEO_ADCx ADC1
+#define NUCLEO_ADCx_CLK_ENABLE() __ADC1_CLK_ENABLE()
+
+#define NUCLEO_ADCx_GPIO_PORT GPIOB
+#define NUCLEO_ADCx_GPIO_PIN GPIO_PIN_0
+#define NUCLEO_ADCx_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE()
+#define NUCLEO_ADCx_GPIO_CLK_DISABLE() __GPIOB_CLK_ENABLE()
+
+
+/* User can use this section to tailor USARTx/UARTx instance used and associated
+ resources */
+/* Definition for USARTx clock resources */
+#define USARTx USART2
+#define USARTx_CLK_ENABLE() __USART2_CLK_ENABLE();
+#define DMAx_CLK_ENABLE() __DMA1_CLK_ENABLE()
+#define USARTx_RX_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
+#define USARTx_TX_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
+
+#define USARTx_FORCE_RESET() __USART2_FORCE_RESET()
+#define USARTx_RELEASE_RESET() __USART2_RELEASE_RESET()
+
+/* Definition for USARTx Pins */
+#define USARTx_TX_PIN GPIO_PIN_2
+#define USARTx_TX_GPIO_PORT GPIOA
+#define USARTx_TX_AF GPIO_AF7_USART2
+#define USARTx_RX_PIN GPIO_PIN_3
+#define USARTx_RX_GPIO_PORT GPIOA
+#define USARTx_RX_AF GPIO_AF7_USART2
+
+/* Definition for USARTx's DMA */
+#define USARTx_TX_DMA_CHANNEL DMA_CHANNEL_4
+#define USARTx_TX_DMA_STREAM DMA1_Stream6
+#define USARTx_RX_DMA_CHANNEL DMA_CHANNEL_4
+#define USARTx_RX_DMA_STREAM DMA1_Stream5
+
+/** @defgroup NUCLEO_F401RE_LOW_LEVEL_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __NUCLEO_F401RE_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+