Test code that Cat.M1 of BG96 for SK Telecom in Korea

This example showing how to use Cat.M1(BG96 module) of SK telecom network in Korea. You need a WIZnet BG96 board or can connect directly to M2Mnet BG96 module and development board.

  • If you are using Mbed OS 5.11.5 version, please see here!
  • Pelion ready example code is here!

board board

Or

/media/uploads/Daniel_Lee/small_pic.jpg

/media/uploads/Daniel_Lee/screen_shot_2019-11-14_at_1.38.16_pm.png

  • BG96 RESET = D7
  • BG96 PWRKEY = D9
  • BG96 RX = D0(or D2)
  • BG96 TX = D1(or D8)
  • BG96 VCC = VCC(5V)
  • BG96 GND = GND

Tested with

  • NUCLEO_F429ZI
  • DISCO_L475VG_IOT01A
  • K66F
  • K64F

Below boards are Need to connect board's D2 and D8 to BG96's TX and RX on mbed_app.json

  • NUCLEO_L152RE
  • NUCLEO_F401RE

 "QUECTEL_BG96.tx": "D8",
 "QUECTEL_BG96.rx": "D2",

1. Import the application into your desktop:

 mbed import https://os.mbed.com/users/Daniel_Lee/code/mbed-os-example-cellular-BG96/

 cd mbed-os-example-cellular-BG96

2. Compile and program:

mbed compile -t <toolchain> -m <TARGET_BOARD>

(supported toolchains : GCC_ARM / ARM / IAR)

3. Download binary to a target board

4. Result

mbed-os-example-cellular


Built: Jul 24 2019, 14:55:22


[MAIN], plmn: NULL
Establishing connection
M2Mnet(BG96) Power ON
[00005501ms][INFO][CELL]: New CellularContext  (20004120)
[00005501ms][INFO][CELL]: CellularContext plmn NULL
[00005502ms][INFO][CELL]: CellularContext connect
[00006503ms][INFO][CELL]: Start connecting (timeout 1000 ms)
[00006512ms][INFO][CELL]: RSSI unknown
[00006520ms][INFO][CELL]: Modem ready
[00006524ms][INFO][CELL]: RSSI unknown
[00006524ms][INFO][CELL]: Setup SIM (timeout 1000 ms)
[00006529ms][INFO][CELL]: SIM is ready
[00006558ms][INFO][CELL]: RSSI unknown
[00006566ms][INFO][CELL]: Network registration (timeout 1000 ms)
[00006570ms][INFO][CELL]: Continue after 1 seconds
[00006964ms][ERR ][CELL]: AT overflow
[00007576ms][INFO][CELL]: RSSI unknown
[00007582ms][INFO][CELL]: Registering network => Attaching network
[00007586ms][INFO][CELL]: RSSI unknown
[00007586ms][INFO][CELL]: Attaching network (timeout 1000 ms)
[00007660ms][INFO][CELL]: Found PDP context 7
[00007663ms][INFO][CELL]: Activate PDP context 7
[00009733ms][INFO][CELL]: Found PDP context 7

Connection Established.
[00009742ms][INFO][CELL]: Socket 0 open
[00009752ms][INFO][CELL]: Socket 1 open
[00009786ms][INFO][CELL]: Socket 1 sent 43 bytes to 8.8.8.8 port 53
[00009967ms][INFO][CELL]: Socket 1 recv 71 bytes from 64:ff9b::808:808 port 53
[00009972ms][INFO][CELL]: Socket 1 closed
TCP: connected with echo.mbedcloudtesting.com server
[00010384ms][INFO][CELL]: Socket 0 sent 4 bytes to 2a05:d018:21f:3800:3164:2a5c7
TCP: Sent 4 Bytes to echo.mbedcloudtesting.com
[00011257ms][INFO][CELL]: Socket 0 recv 4 bytes
[00021263ms][INFO][CELL]: Socket 0 closed
Received from echo server 4 Bytes
[00021263ms][INFO][CELL]: CellularContext disconnect()
[00021264ms][INFO][CELL]: cb: CellularContext disconnected


Success. Exiting

5. Patched code

If need more information such as how to test, please look at https://os.mbed.com/teams/mbed-os-examples/code/mbed-os-example-cellular/.

Revision:
1:ccaceb0dbbaf
Parent:
0:4611f6cf2413
Child:
7:ad3e80a40359
diff -r 4611f6cf2413 -r ccaceb0dbbaf Jenkinsfile
--- a/Jenkinsfile	Thu Mar 08 17:31:37 2018 +0000
+++ b/Jenkinsfile	Fri Mar 09 09:30:19 2018 +0000
@@ -1,41 +1,45 @@
 properties ([[$class: 'ParametersDefinitionProperty', parameterDefinitions: [
-  [$class: 'StringParameterDefinition', name: 'mbed_os_revision', defaultValue: 'mbed-os-5.4', description: 'Revision of mbed-os to build'],
+  [$class: 'StringParameterDefinition', name: 'mbed_os_revision', defaultValue: '', description: 'Revision of mbed-os to build. To access mbed-os PR use format "pull/PR number/head"'],
   [$class: 'BooleanParameterDefinition', name: 'smoke_test', defaultValue: true, description: 'Runs HW smoke tests on Cellular devices']
   ]]])
 
-echo "Run smoke tests: ${params.smoke_test}"
-
-try {
-  echo "Verifying build with mbed-os version ${mbed_os_revision}"
-  env.MBED_OS_REVISION = "${mbed_os_revision}"
-} catch (err) {
-  def mbed_os_revision = "master"
-  echo "Verifying build with mbed-os version ${mbed_os_revision}"
-  env.MBED_OS_REVISION = "${mbed_os_revision}"
+if (env.MBED_OS_REVISION == null) {
+  echo 'First run in this branch, using default parameter values'
+  env.MBED_OS_REVISION = ''
+}
+if (env.MBED_OS_REVISION == '') {
+  echo 'Using mbed OS revision from mbed-os.lib'
+} else {
+  echo "Using given mbed OS revision: ${env.MBED_OS_REVISION}"
+  if (env.MBED_OS_REVISION.matches('pull/\\d+/head')) {
+    echo "Revision is a Pull Request"
+  }
 }
 
 // Map RaaS instances to corresponding test suites
 def raas = [
   "cellular_smoke_ublox_c027.json": "8072"
-  // Currently dragonfly is not supported by RAAS, skip it 
-  //"cellular_smoke_mts_dragonfly.json": "8072"
-  ]
+  //"cellular_smoke_mtb_mts_dragonfly.json": "8119"
+]
 
 // List of targets with supported modem families
 def target_families = [
-  "UBLOX": ["UBLOX_C027"]
-  ]
+  "UBLOX": ["UBLOX_C027"],
+  "DRAGONFLY": ["MTB_MTS_DRAGONFLY"]
+]
 
 // Supported Modems
 def targets = [
-  "UBLOX_C027"
+  "UBLOX_C027",
+  "MTB_MTS_DRAGONFLY"
 ]
 
 // Map toolchains to compilers
 def toolchains = [
   ARM: "armcc",
   GCC_ARM: "arm-none-eabi-gcc",
-  IAR: "iar_arm"
+  IAR: "iar_arm",
+  ARMC6: "arm6"
   ]
 
 // supported socket tests
@@ -67,11 +71,11 @@
   }
 }
 
-
 def parallelRunSmoke = [:]
 
 // Need to compare boolean against string value
-if ( params.smoke_test == true ) {
+if (params.smoke_test == true) {
+  echo "Running smoke tests"
   // Generate smoke tests based on suite amount
   for(int i = 0; i < raas.size(); i++) {
   	for(int j = 0; j < sockets.size(); j++) {
@@ -84,6 +88,8 @@
     	parallelRunSmoke[smokeStep] = run_smoke(target_families, raasPort, suite_to_run, toolchains, targets, socket)
     }
   }
+} else {
+  echo "Skipping smoke tests"
 }
 
 timestamps {
@@ -110,9 +116,17 @@
 
           // Set mbed-os to revision received as parameter
           execute ("mbed deploy --protocol ssh")
-          //dir ("mbed-os") {
-          //  execute ("git checkout ${env.MBED_OS_REVISION}")
-          //}
+          if (env.MBED_OS_REVISION != '') {
+            dir("mbed-os") {
+              if (env.MBED_OS_REVISION.matches('pull/\\d+/head')) {
+                // Use mbed-os PR and switch to branch created
+                execute("git fetch origin ${env.MBED_OS_REVISION}:_PR_")
+                execute("git checkout _PR_")
+              } else {
+                execute ("git checkout ${env.MBED_OS_REVISION}")
+              }
+            }
+          }
 
           execute ("mbed compile --build out/${target}_${toolchain}/ -m ${target} -t ${toolchain} -c --app-config ${config_file}")
         }
@@ -132,11 +146,11 @@
     def suiteName = suite_to_run.substring(0, suite_to_run.indexOf('.'))
     stage ("smoke_${raasPort}_${suiteName}") {
       //node is actually the type of machine, i.e., mesh-test boild down to linux
-      node ("mesh-test") {
+      node ("linux") {
         deleteDir()
         dir("mbed-clitest") {
           git "git@github.com:ARMmbed/mbed-clitest.git"
-          execute("git checkout master")
+          execute("git checkout ${env.LATEST_CLITEST_STABLE_REL}")
           dir("mbed-clitest-suites") {
             git "git@github.com:ARMmbed/mbed-clitest-suites.git"
             execute("git submodule update --init --recursive")
@@ -149,23 +163,19 @@
           for (int i = 0; i < target_families.size(); i++) {
             for(int j = 0; j < toolchains.size(); j++) {
               for(int k = 0; k < targets.size(); k++) {
-            	 def target_family = target_families.keySet().asList().get(i)
-                 def allowed_target_type = target_families.get(target_family)
-                 def target = targets.get(k)
-                 def toolchain = toolchains.keySet().asList().get(j)
+                def target_family = target_families.keySet().asList().get(i)
+                def allowed_target_type = target_families.get(target_family)
+                def target = targets.get(k)
+                def toolchain = toolchains.keySet().asList().get(j)
 
-                 if(allowed_target_type.contains(target)) {
-                    unstash "${target}_${toolchain}_${socket}"
-                  }
-              	}
+                if(allowed_target_type.contains(target)) {
+                  unstash "${target}_${toolchain}_${socket}"
+                }
+              }
             }
           }     
-          if ("${suiteName}" == "cellular_smoke_mts_dragonfly")  {
-            execute("python clitest.py --suitedir mbed-clitest-suites/suites/ --suite ${suite_to_run} --type hardware --reset hard --raas 62.44.193.186:${raasPort} --tcdir mbed-clitest-suites/cellular  --failure_return_value -vvv -w --log log_${raasPort}_${suiteName}")
-          } else {
-            execute("python clitest.py --suitedir mbed-clitest-suites/suites/ --suite ${suite_to_run} --type hardware --reset --raas 62.44.193.186:${raasPort} --tcdir mbed-clitest-suites/cellular  --failure_return_value -vvv -w --log log_${raasPort}_${suiteName}")
-          }
-         archive "log_${raasPort}_${suiteName}/**/*"
+          execute("python clitest.py --suitedir mbed-clitest-suites/suites/ --suite ${suite_to_run} --type hardware --reset --raas 62.44.193.186:${raasPort} --tcdir mbed-clitest-suites/cellular  --failure_return_value -vvv -w --log log_${raasPort}_${suiteName}")
+          archive "log_${raasPort}_${suiteName}/**/*"
         }
       }
     }