![](/media/cache/profiles/f.jpg.50x50_q85.jpg)
Generates a test signal on an AnalogOut and monitors a signal on an AnalogIn, plotting the test signal or the actual signal depending on a conditional compile. The wait() and wait_ms() library calls for this board are highly inaccurate so a new function is provided to wait for X number of milliseconds -- which is not very accurate.
Dependencies: LCD_DISCO_F429ZI mbed TS_DISCO_F429ZI mbed-os BSP_DISCO_F429ZI
Diff: LaserMon-Main.cpp
- Revision:
- 2:cbcf2695a4a1
- Parent:
- 1:b9d4b9b8884c
diff -r b9d4b9b8884c -r cbcf2695a4a1 LaserMon-Main.cpp --- a/LaserMon-Main.cpp Fri Jun 14 21:11:31 2019 +0000 +++ b/LaserMon-Main.cpp Mon Jun 17 17:11:07 2019 +0000 @@ -11,6 +11,7 @@ #include "TS_DISCO_F429ZI.h" // For controlling the touch screen #include "LaserMon-TestOutput.h" // For generating test output signal #include "LaserMon-ScanInput.h" // For monitoring laser power pin +#include "LaserMon-TEC.h" // For monitoring the TEC output #include "LaserMon-Main.h" // Always include ourself // ---------------------------------------------------------------------- @@ -19,8 +20,30 @@ // ---------------------------------------------------------------------- const char * pch_firstMessage = "Test signal on PA_5"; - const char * pch_secondMessage = "Laser Scan on PC_1"; + const char * pch_secondMessage = "Laser Scan on PC_1"; + const char * pch_thirdMessage = "TEC signal on PC_3"; + + // Instantiate a digitial input mapped as our push button + static DigitalIn st_pushButton(PA_0); + // We must see the button down for a period of time, we + // do a debounce even though the class may do one already + static uint16_t u16_buttonDownCount; + + // This flag informs the laser scan input module whether + // it is permitted to plot the scan input or not + static bool b_allowPlotting; + + // We store the scan length in milliseconds offered to this + // module by the laser scanner, and we store the TEC voltage + // offered by the TEC scanner + static uint16_t u16_scanLength; + static uint16_t u16_TECVoltage; + static uint16_t u16_scanCount; + + // We talk to Jenkins through an RS232 serial interface + static Serial st_Serial1(USE_SERIAL_TX, USE_SERIAL_RX); + // ---------------------------------------------------------------------- // Define global data storage which we will export // @@ -38,6 +61,13 @@ // ---------------------------------------------------------------------- static void MainInit(void) { + // Initialize locally-held data + u16_buttonDownCount = 0; + b_allowPlotting = true; + u16_scanLength = 0; + u16_TECVoltage = 0; + u16_scanCount = 0; + // Bring the LCD up st_lcd.Clear(LCD_COLOR_WHITE); @@ -49,6 +79,168 @@ // Set the default font size BSP_LCD_SetFont(&Font16); + + // Set the push button to not have an internal pull-up or down + st_pushButton.mode(PullNone); + + // We configure the serial interface + st_Serial1.baud(115200); + st_Serial1.format(8, SerialBase::None, 1); +} + +// ---------------------------------------------------------------------- +// +// +// ---------------------------------------------------------------------- +static void MainCheckInbound(void) +{ + // See if there is inbound serial data + if (st_Serial1.readable()) + { + + } +} + +// ---------------------------------------------------------------------- +// +// +// ---------------------------------------------------------------------- +static void MainTransmitOutput(uint8_t * pu8_thisFrame, uint16_t u16_thisCount) +{ + st_Serial1.write(pu8_thisFrame, u16_thisCount, NULL); +} + +// ---------------------------------------------------------------------- +// LaserMonMainInformScanInformation() +// +// +// ---------------------------------------------------------------------- +void LaserMonMainInformScanInformation(uint16_t u16_thisScanLength, uint16_t u16_thisScanCount) +{ + // If we arte displaying information, the scan gets slowed down + // while we print the information to the screen, making the scan + // information inaccurate. To avoid displaying inaccurate values + // we refrain from storing the scan rate while displaying the + // information + if (true == b_allowPlotting) + { + // Allow the scan information to get updated + u16_scanLength = u16_thisScanLength; + } + + // Always store the scan counter value + u16_scanCount = u16_thisScanCount; +} + +// ---------------------------------------------------------------------- +// LaserMonMainInformTECVoltage() +// +// ---------------------------------------------------------------------- +void LaserMonMainInformTECVoltage(uint16_t u16_thisVoltage) +{ + u16_TECVoltage = u16_thisVoltage; +} + +// ---------------------------------------------------------------------- +// MainReportValues() +// +// ---------------------------------------------------------------------- +static void MainReportValues(void) +{ + char pch_holdMessage[101] = { 0 }; + + (void)sprintf(pch_holdMessage, "Scan duration %u", u16_scanLength); + st_lcd.DisplayStringAt(1, LINE(1), (uint8_t *)pch_holdMessage, LEFT_MODE); + + (void)sprintf(pch_holdMessage, "Scan count %u", u16_scanCount); + st_lcd.DisplayStringAt(1, LINE(2), (uint8_t *)pch_holdMessage, LEFT_MODE); + + (void)sprintf(pch_holdMessage, "TEC voltage %1.02f", (float)u16_TECVoltage / 100.0f); + st_lcd.DisplayStringAt(1, LINE(3), (uint8_t *)pch_holdMessage, LEFT_MODE); + + (void)sprintf(pch_holdMessage, "TEC average %1.02f", (float)TECGetLastTenAverage() / 100.0f); + st_lcd.DisplayStringAt(1, LINE(4), (uint8_t *)pch_holdMessage, LEFT_MODE); + + // Build a report for Jenkins or anything else to monitor + (void)sprintf(pch_holdMessage, "%u,%1.02f,%1.02f,%u%c%c", + u16_scanLength, + ((float)u16_TECVoltage / 100.0f), + ((float)TECGetLastTenAverage() / 100.0f), + u16_scanCount, + 0x0d, 0x0a); + + // Send that report out the serial interface + MainTransmitOutput((uint8_t *)pch_holdMessage, (uint16_t)strlen(pch_holdMessage)); +} + +// ---------------------------------------------------------------------- +// MainHandleButtonDown() +// +// ---------------------------------------------------------------------- +static void MainHandleButtonDown(void) +{ + // Are we currently allowing the laser scan input to be plotted? + if (true == b_allowPlotting) + { + // Flag the fact that we are not allowing the plot + b_allowPlotting = false; + + // Make sure that the display is cleared + st_lcd.Clear(LCD_COLOR_WHITE); + + // Report the lasr scan and TEC voltage values + MainReportValues(); + } + else + { + // Clear the display + st_lcd.Clear(LCD_COLOR_WHITE); + + // Clear the flag so that the plot of the scan may be displayed + b_allowPlotting = true; + } +} + +// ---------------------------------------------------------------------- +// MainThread() +// +// ---------------------------------------------------------------------- +static bool MainThread(void) +{ + bool b_restartOneSecondTimer = false; + + // Acquire / poll the state of the push button + int i_buttonState = st_pushButton.read(); + + // Is the button down? + if (1 == i_buttonState) + { + // The button is not down, was the button down before? + // We need to see if the button is down for 10 milliseconds + // before we agree that the button is down + if (u16_buttonDownCount < 10) + { + if (10 == ++u16_buttonDownCount) + { + // The button has been held down long enough + MainHandleButtonDown(); + + // We want to have the one second timer restarted + b_restartOneSecondTimer = true; + } + } + } + else + { + // The button is not down so clear the down counter + u16_buttonDownCount = 0; + } + + // See if there is inbouns serial data to be processed + MainCheckInbound(); + + // Indicate whether we are displaying the running information or not + return b_restartOneSecondTimer; } // ---------------------------------------------------------------------- @@ -58,26 +250,65 @@ // ---------------------------------------------------------------------- int main(void) { + uint16_t u16_oneSecondCounter = 0; + bool b_restartOneSecondTimer = false; + // Perform local module initialization, if any MainInit(); - // Start generating the putput test signal + // Initialize the generating of the output test signal module TestOutputInit(); - // Start scanning the laser drive power + // Initialize the scanning of the the laser drive power module ScanInputInit(); + // Initialize the scanning of the TEC input and launch thread + TECInit(); + // Display information about what signal pigs have what - st_lcd.DisplayStringAt(1, LINE(1), (uint8_t *)pch_firstMessage, LEFT_MODE); - st_lcd.DisplayStringAt(1, LINE(2), (uint8_t *)pch_secondMessage, LEFT_MODE); + st_lcd.DisplayStringAt(1, LINE(0), (uint8_t *)pch_firstMessage, LEFT_MODE); + st_lcd.DisplayStringAt(1, LINE(1), (uint8_t *)pch_secondMessage, LEFT_MODE); + st_lcd.DisplayStringAt(1, LINE(2), (uint8_t *)pch_thirdMessage, LEFT_MODE); // Go in to a forever loop for the main thread which does nothing while(true) { // Wait for 1 millisecond wait_us(899); + + // Instead of launching threads whose timing is a problem, + // we merely call the once-a-millisecond "thread" functions + // to drive the test signal out and the laser scan signal in TestOutputThread(); - ScanInputThread(); + ScanInputThread(b_allowPlotting); + b_restartOneSecondTimer = MainThread(); + TECThread(); + + // Have we just started displaying collected information? + if (true == b_restartOneSecondTimer) + { + // Yes, so we will count down the timer + u16_oneSecondCounter = 1000; + } + else + { + // In case the one second timer is running, stop it + b_restartOneSecondTimer = 0; + } + + // Is the one second counter running? + if (u16_oneSecondCounter > 0 && false == b_allowPlotting) + { + // Count down the one second timer and see if it's expired + if (0 == --u16_oneSecondCounter) + { + // Report the current values again + MainReportValues(); + + // Restart the one second timer + u16_oneSecondCounter = 1000; + } + } } }