Diff: main.cpp

Revision:

112:2af5a1ac47d5

Parent:

111:47b0267b8dd4

--- a/main.cpp	Tue Nov 09 20:33:18 2021 +0000
+++ b/main.cpp	Wed Nov 10 14:51:10 2021 +0000
@@ -1,6 +1,9 @@
 /*
-    Project: 21_7segmentTest_v5 (Lab Wk 10)
-    File: main.cpp
+    Project: 21_7segmentTest2_v5 (Lab Wk 10)
+    File: main.cpp (v. 1.0)
+    
+    This is a modified, multi-file version of my original 7-segment display 
+    test program.
     
     This test program confirms hardware operation and demonstrates use of the 
     7-segement display. It will also be used as the starting point for the 
@@ -17,61 +20,33 @@
     Created: 11/9/21 (v. 1.0)
 */
 #include "mbed.h"
-
-void display(int disVal, BusOut &disBus);
-
-Serial pc(USBTX, NC, 9600); // Use for debugging.
+#include "display.h"
 
 const int SLP_TIME = 1000; // Update once per second.
 
 int main(void)
 {
+    Serial pc(USBTX, NC, 9600); // Use for debugging.
     // Note that bit sequence is the oposite of what I initially thought they 
     // would be. That is, pins are listed in low order to high order sequence.
     BusOut disBus(D9, D8, D7, D6, D5, D4, D3, D2); // The display.
     int myCount = 0; // Loop count. Rolls over at 18.
     
     // Test the wiring.
+    
     display(18, disBus);  // All on (binary).
-    ThisThread::sleep_for(2000); // Test even bars for 0.4 seconds.
+    pc.printf("Wiring test. All segments on.\n"); // Status message.
+    ThisThread::sleep_for(2000); // Light all segments for 2 seconds.
     display(17, disBus);  // All off (binary).
-    ThisThread::sleep_for(2000); // Test even bars for 0.4 seconds.
+    pc.printf("Wiring test All segments off.\n"); // Status message.
+    ThisThread::sleep_for(2000); // Turn off all segments for 2 seconds.
     
     // Enter main loop.
     while(true) {
         display(myCount, disBus); // Display myCount (count).
-        pc.printf("In main myCount = %d.\n", myCount); // Send count to PC.
+        pc.printf("In main myCount = %x.\n", myCount); // Send count to PC.
         myCount++; // Increment the count.
         if (myCount > 18) myCount = 0; // Rollover!
         ThisThread::sleep_for(SLP_TIME);  // Display value for 1 second.
     }
-}
-
-void display(int disVal, BusOut &disBus){
-    // 7-segment, active low look-up-table. Displays Hex 0 to F, dp, all off 
-    // and all on. 
-    const int lutAL[] = { 
-    0b00000011, // 0 = 0
-    0b10011111, // 1 = 1
-    0b00100101, // 2 = 2
-    0b00001101, // 3 = 3
-    0b10011001, // 4 = 4
-    0b01001001, // 5 = 5
-    0b01000001, // 6 = 6
-    0b00011111, // 7 = 7
-    0b00000001, // 8 = 8
-    0b00001001, // 9 = 9
-    0b00010001, // 10 = a
-    0b11000001, // 11 = b
-    0b11100101, // 12 = c
-    0b10000101, // 13 = d
-    0b01100001, // 14 = e
-    0b01110001, // 15 = f
-    0b11111110, // 16 = dp
-    0b11111111, // 17 = All off
-    0b00000000  // 18 = All on
-    //abcdefg_dp – 7-segement output codes 0 to 18.
-    };
-    disBus = lutAL[disVal];
-    pc.printf("In display, disVal = %d\n", disVal);
 }
\ No newline at end of file