Diff: Hardwares/ArduCAM.h

Revision:

93:8e1bd3602d53

Parent:

90:a8a0ab59e7eb

Child:

96:ec89c4d1383d

diff -r e9bd429f16b5 -r 8e1bd3602d53 Hardwares/ArduCAM.h
--- a/Hardwares/ArduCAM.h	Wed Apr 19 17:15:46 2017 +0000
+++ b/Hardwares/ArduCAM.h	Wed Apr 19 18:34:12 2017 +0000
@@ -1,3 +1,9 @@
+/**
+ * @file ArduCAM.h
+ * @brief The header file for all functions that controls the ArduCam Mini camera.
+ * @author Jordan Brack <jabrack@mix.wvu.edu>, Haofan Zheng <hazheng@mix.wvu.edu>
+ * 
+ */
 #pragma once
 #ifndef ARDU_CAM_H
 #define ARDU_CAM_H
@@ -5,120 +11,146 @@
 #include <mbed.h>
 #include "PinAssignment.h"
 
-#define RESOLUTION_WIDTH 80
-#define RESOLUTION_HEIGHT 60
+#define RESOLUTION_WIDTH  80   /*!< @brief The resolution width we are using. */
+#define RESOLUTION_HEIGHT 60   /*!< @brief The resolution height we are using. */
 //#define MANUAL_REDUCE_RESULOTION_BY2
-#define CAM_ROI_UPPER_LIMIT 6
+#define CAM_ROI_UPPER_LIMIT 6  /*!< @brief The number of lines we actually using for the image processing. */
 
 
-#define BOTH_NOT_FOUND   0
-#define LEFT_FOUND       1
-#define RIGHT_FOUND      2
-#define BOTH_FOUND       3
+#define BOTH_NOT_FOUND   0     /*!< @brief ENUM for whether the border is found. Both sides of the border is not found. */
+#define LEFT_FOUND       1     /*!< @brief ENUM for whether the border is found. Left side of the border is found. */
+#define RIGHT_FOUND      2     /*!< @brief ENUM for whether the border is found. Right side of the border is found. */
+#define BOTH_FOUND       3     /*!< @brief ENUM for whether the border is found. Both sides of the border is found. */
 
 //=====Must pick one and only one here!=====
-//#define ARDUCAM_SHIELD_OV2640
-//#define ARDUCAM_SHIELD_OV7725
-//#define ARDUCAM_SHIELD_OV7670
-#define ARDUCAM_MINI_OV2640
+//#define ARDUCAM_SHIELD_OV2640     /*!< @brief Use ArduCam Shield V2 with OV2640 camera module. */
+//#define ARDUCAM_SHIELD_OV7725     /*!< @brief Use ArduCam Shield V2 with OV7725 camera module. */
+//#define ARDUCAM_SHIELD_OV7670     /*!< @brief Use ArduCam Shield V2 with OV7670 camera module. */
+#define ARDUCAM_MINI_OV2640       /*!< @brief Use ArduCam Mini with OV2640 camera module. */
 //==========================================
 
 
 #if defined(ARDUCAM_SHIELD_OV2640) || defined(ARDUCAM_SHIELD_OV7725) || defined(ARDUCAM_SHIELD_OV7670)
-    #define ARDUCAM_SHIELD
+    #define ARDUCAM_SHIELD     /*!< @brief Use ArduCam Shield V2. (Automatically defined, DO NOT touch.) */
 #elif defined(ARDUCAM_MINI_OV2640)
-    #define ARDUCAM_MINI
+    #define ARDUCAM_MINI       /*!< @brief Use ArduCam Mini. (Automatically defined, DO NOT touch.) */
 #else
     #error Must pick one and only one ArduCam type!
 #endif
 
 #if defined(ARDUCAM_SHIELD_OV2640) || defined(ARDUCAM_MINI_OV2640)
-    #define ARDUCAM_OV2640
+    #define ARDUCAM_OV2640     /*!< @brief Use OV2640 camera module. (Automatically defined, DO NOT touch.) */
 #elif defined(ARDUCAM_SHIELD_OV7725)
-    #define ARDUCAM_OV7725
+    #define ARDUCAM_OV7725     /*!< @brief Use OV7725 camera module. (Automatically defined, DO NOT touch.) */
 #elif defined(ARDUCAM_SHIELD_OV7670)
-    #define ARDUCAM_OV7670
+    #define ARDUCAM_OV7670     /*!< @brief Use OV7670 camera module. (Automatically defined, DO NOT touch.) */
 #else
     #error Must pick one and only one ArduCam type!
 #endif
 
 #if defined(ARDUCAM_OV2640)
     #include "OV2640RegProg.h"
-    //using namespace OV2640Prog;
 #elif defined(ARDUCAM_OV7725)
     #include "OV7725RegProg.h"
-    //using namespace OV7725Prog;
 #elif defined(ARDUCAM_OV7670)
     #include "OV7670RegProg.h"
-    //using namespace OV7670Prog;
 #endif
 
 #if defined(ARDUCAM_SHIELD)
-    #define ARDUCHIP_VER_NUM        0x61
+    #define ARDUCHIP_VER_NUM        0x61     /*!< @brief ArduCam Version number for ArduCam Shield V2. */
 #elif defined(ARDUCAM_MINI)
-    #define ARDUCHIP_VER_NUM        0x55
+    #define ARDUCHIP_VER_NUM        0x55     /*!< @brief ArduCam Version number for ArduCam Mini. */
 #endif
 
-#define ARDUCHIP_TEST1          0x00  //TEST register
-#define ARDUCHIP_TEST_MSG       0x72
+#define ARDUCHIP_TEST1          0x00  /*!< @brief The address for the ArduCam test register. */
+#define ARDUCHIP_TEST_MSG       0x72     /*!< @brief The message used to write/read/verify with the test register. */
 
-#define ARDUCHIP_CAP_CTRL       0x01  //Capture Control Register
+#define ARDUCHIP_CAP_CTRL       0x01  /*!< @brief The register address that used to set how many picture need to take. */
 
 #if defined(ARDUCAM_SHIELD)
-    #define ARDUCHIP_MODE           0x02  //Mode register
-    //#define MCU2LCD_MODE            0x00
-    //#define CAM2LCD_MODE            0x01
-    #define MCU2LCD_MODE            0x01
-    #define CAM2LCD_MODE            0x02
-    //#define LCD2MCU_MODE            0x04
+    #define ARDUCHIP_MODE           0x02  /*!< @brief The address for the ArduCam bus mode setting register. */
+    #define MCU2LCD_MODE            0x00      /*!< @brief The byte used to set the ArduCam bus to MCU to LCD mode. */
+    #define CAM2LCD_MODE            0x01      /*!< @brief The byte used to set the ArduCam bus to CAM to LCD mode. */
 #endif
 
-#define ARDUCHIP_FIFO           0x04  //FIFO and I2C control
-#define FIFO_CLEAR_MASK         0x01
-#define FIFO_START_MASK         0x02
-#define FIFO_RDPTR_RST_MASK     0x10
-#define FIFO_WRPTR_RST_MASK     0x20
+#define ARDUCHIP_FIFO           0x04  /*!< @brief The address for the ArduCam FIFO and I2C setting register. */
+#define FIFO_CLEAR_MASK         0x01       /*!< @brief The mask used to clear the FIFO. */
+#define FIFO_START_MASK         0x02       /*!< @brief The mask used to start the FIFO write. */
+#define FIFO_RDPTR_RST_MASK     0x10       /*!< @brief The mask used to reset the FIFO read pointer. */
+#define FIFO_WRPTR_RST_MASK     0x20       /*!< @brief The mask used to reset the FIFO write pointer. */
 
-#define ARDUCHIP_TRIG           0x41  //Trigger source
-#define VSYNC_MASK              0x01
-#define SHUTTER_MASK            0x02
-#define CAP_DONE_MASK           0x08
+#define ARDUCHIP_TRIG           0x41  /*!< @brief The address for the ArduCam trigger status register. */
+#define VSYNC_MASK              0x01    /*!< @brief The mask used to check the Vsync status. */
+#define SHUTTER_MASK            0x02    /*!< @brief The mask used to check the shutter status. */
+#define CAP_DONE_MASK           0x08    /*!< @brief The mask used to check if the capture is done. */
 
-#define FIFO_SIZE1              0x42  //Camera write FIFO size[7:0] for burst to read
-#define FIFO_SIZE2              0x43  //Camera write FIFO size[15:8]
-#define FIFO_SIZE3              0x44  //Camera write FIFO size[18:16]
+#define FIFO_SIZE1              0x42  /*!< @brief Camera write FIFO size[7:0] for burst to read. */
+#define FIFO_SIZE2              0x43  /*!< @brief Camera write FIFO size[15:8]. */
+#define FIFO_SIZE3              0x44  /*!< @brief Camera write FIFO size[18:16]. */
 
-#define BURST_FIFO_READ         0x3C  //Burst FIFO read operation
-#define SINGLE_FIFO_READ        0x3D  //Single FIFO read operation
+#define BURST_FIFO_READ         0x3C  /*!< @brief Burst FIFO read operation. */
+#define SINGLE_FIFO_READ        0x3D  /*!< @brief Single FIFO read operation. */
 
 #ifdef __cplusplus
 extern "C" {
 #endif
 
+/**
+* @brief Init the camera. There is only one camera in the system, thus, this function is required to be called only once during the system initialization.
+*/
 bool ardu_cam_init();
 
+/**
+* @brief Start the capture for one picture. The capture will automatically stop after a picture is captured.
+*/
 void ardu_cam_start_capture();
 
+/**
+* @brief Get the current FIFO length.
+* @return The length of the current FIFO.
+*/
 uint32_t ardu_cam_get_fifo_length();
 
-void ardu_cam_print_debug();
-
+/**
+* @brief Get the array that describe the center line that detected by the image processing.
+* @return A volatile pointer points to the array.
+*/
 volatile const uint8_t* ardu_cam_get_center_array();
 
+/**
+* @brief Check if the capture is finished.
+* @return True if the capture is finished, otherwise, return false.
+*/
 uint8_t ardu_cam_is_capture_finished();
 
+/**
+* @brief Display the image on the UTFT screen.
+*/
 void ardu_cam_display_img_utft();
 
+/**
+* @brief Get a new picture, and run the image processing.
+*/
 void image_processing();
 
+/**
+* @brief Get wether the terminate line is detected.
+* @return 0 for no, 1 for yes.
+*/
 uint8_t ardu_cam_get_is_encounter_terminate();
 
+/**
+* @brief Get wether the borders are found.
+* @return ENUM for whether the border is found. Please refer to the definition above.
+*/
 uint8_t ardu_cam_get_is_border_found();
 
 #ifdef __cplusplus
 }
 #endif
 
+//void ardu_cam_print_debug();
+
 //uint8_t ardu_cam_read_reg(uint8_t addr);
 
 //void ardu_cam_write_reg(uint8_t addr, uint8_t data);