Thomas Hamilton
SD Card Interface class. Log raw data bytes to memory addresses of your choice, or format the card and use the FAT file system to write files.
Diff: FATFileSystem/Core/ffconf.h
- Revision:
- 6:ddf09d859ed7
- Parent:
- 5:d85e20b6b904
diff -r d85e20b6b904 -r ddf09d859ed7 FATFileSystem/Core/ffconf.h --- a/FATFileSystem/Core/ffconf.h Sat Jan 15 05:58:22 2011 +0000 +++ b/FATFileSystem/Core/ffconf.h Sun Jan 16 09:20:30 2011 +0000 @@ -1,163 +1,163 @@ -//Modified by Thomas Hamilton, Copyright 2010 - -/*---------------------------------------------------------------------------/ -/ FatFs - FAT file system module configuration file R0.08 (C)ChaN, 2010 / -/----------------------------------------------------------------------------/ -/ -/ CAUTION! Do not forget to make clean the project after any changes to -/ the configuration options. -/ -/---------------------------------------------------------------------------*/ - -#ifndef _FFCONF -#define _FFCONF 8085 /* Revision ID */ - -/*---------------------------------------------------------------------------/ -/ Function and Buffer Configurations / -/---------------------------------------------------------------------------*/ - -#define _FS_TINY 0 /* 0:Normal or 1:Tiny */ -/* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system -/ object instead of the sector buffer in the individual file object for file -/ data transfer. This reduces memory consumption 512 bytes each file object. */ - -#define _FS_READONLY 0 /* 0:Read/Write or 1:Read only */ -/* Setting _FS_READONLY to 1 defines read only configuration. This removes -/ writing functions, f_write, f_sync, f_unlink, f_mkdir, f_chmod, f_rename, -/ f_truncate and useless f_getfree. */ - -#define _FS_MINIMIZE 0 /* 0, 1, 2 or 3 */ -/* The _FS_MINIMIZE option defines minimization level to remove some functions. -/ -/ 0: Full function. -/ 1: f_stat, f_getfree, f_unlink, f_mkdir, f_chmod, f_truncate and f_rename -/ are removed. -/ 2: f_opendir and f_readdir are removed in addition to level 1. -/ 3: f_lseek is removed in addition to level 2. */ - -#define _USE_STRFUNC 2 /* 0:Disable or 1/2:Enable */ -/* To enable string functions, set _USE_STRFUNC to 1 or 2. */ - -#define _USE_MKFS 0 /* 0:Disable or 1:Enable */ -/* To enable f_mkfs function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */ - -#define _USE_FORWARD 0 /* 0:Disable or 1:Enable */ -/* To enable f_forward function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */ - -#define _USE_FASTSEEK 0 /* 0:Disable or 1:Enable */ -/* To enable fast seek feature, set _USE_FASTSEEK to 1. */ - -/*---------------------------------------------------------------------------/ -/ Locale and Namespace Configurations -/----------------------------------------------------------------------------*/ - -#define _CODE_PAGE 1 -/* The _CODE_PAGE specifies the OEM code page to be used on the target system. -/ Incorrect setting of the code page can cause a file open failure. -/ -/ 932 - Japanese Shift-JIS (DBCS, OEM, Windows) -/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows) -/ 949 - Korean (DBCS, OEM, Windows) -/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows) -/ 1250 - Central Europe (Windows) -/ 1251 - Cyrillic (Windows) -/ 1252 - Latin 1 (Windows) -/ 1253 - Greek (Windows) -/ 1254 - Turkish (Windows) -/ 1255 - Hebrew (Windows) -/ 1256 - Arabic (Windows) -/ 1257 - Baltic (Windows) -/ 1258 - Vietnam (OEM, Windows) -/ 437 - U.S. (OEM) -/ 720 - Arabic (OEM) -/ 737 - Greek (OEM) -/ 775 - Baltic (OEM) -/ 850 - Multilingual Latin 1 (OEM) -/ 858 - Multilingual Latin 1 + Euro (OEM) -/ 852 - Latin 2 (OEM) -/ 855 - Cyrillic (OEM) -/ 866 - Russian (OEM) -/ 857 - Turkish (OEM) -/ 862 - Hebrew (OEM) -/ 874 - Thai (OEM, Windows) -/ 1 - ASCII only (Valid for non LFN cfg.) */ - -#define _USE_LFN 0 /* 0 to 3 */ -#define _MAX_LFN 255 /* Maximum LFN length to handle (12 to 255) */ -/* The _USE_LFN option switches the LFN support. -/ -/ 0: Disable LFN. _MAX_LFN and _LFN_UNICODE have no effect. -/ 1: Enable LFN with static working buffer on the bss. NOT REENTRANT. -/ 2: Enable LFN with dynamic working buffer on the STACK. -/ 3: Enable LFN with dynamic working buffer on the HEAP. -/ -/ The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. When enable LFN, -/ Unicode handling functions ff_convert() and ff_wtoupper() must be added -/ to the project. When enable to use heap, memory control functions -/ ff_memalloc() and ff_memfree() must be added to the project. */ - -#define _LFN_UNICODE 0 /* 0:ANSI/OEM or 1:Unicode */ -/* To switch the character code set on FatFs API to Unicode, -/ enable LFN feature and set _LFN_UNICODE to 1. */ - -#define _FS_RPATH 0 /* 0:Disable or 1:Enable */ -/* When _FS_RPATH is set to 1, relative path feature is enabled and f_chdir, -/ f_chdrive function are available. -/ Note that output of the f_readdir fnction is affected by this option. */ - -/*---------------------------------------------------------------------------/ -/ Physical Drive Configurations -/----------------------------------------------------------------------------*/ - -#define _DRIVES 7 -/* Number of volumes (logical drives) to be used. */ - -#define _MAX_SS 512 /* 512, 1024, 2048 or 4096 */ -/* Maximum sector size to be handled. -/ Always set 512 for memory card and hard disk but a larger value may be -/ required for floppy disk (512/1024) and optical disk (512/2048). -/ When _MAX_SS is larger than 512, GET_SECTOR_SIZE command must be implememted -/ to the disk_ioctl function. */ - -#define _MULTI_PARTITION 0 /* 0:Single parition or 1:Multiple partition */ -/* When _MULTI_PARTITION is set to 0, each volume is bound to the same physical -/ drive number and can mount only first primaly partition. When it is set to 1, -/ each volume is tied to the partitions listed in Drives[]. */ - -/*---------------------------------------------------------------------------/ -/ System Configurations -/----------------------------------------------------------------------------*/ - -#define _WORD_ACCESS 0 /* 0 or 1 */ -/* Set 0 first and it is always compatible with all platforms. The _WORD_ACCESS -/ option defines which access method is used to the word data on the FAT volume. -/ -/ 0: Byte-by-byte access. -/ 1: Word access. Do not choose this unless following condition is met. -/ -/ When the byte order on the memory is big-endian or address miss-aligned word -/ access results incorrect behavior, the _WORD_ACCESS must be set to 0. -/ If it is not the case, the value can also be set to 1 to improve the -/ performance and code size. */ - -#define _FS_REENTRANT 0 /* 0:Disable or 1:Enable */ -#define _FS_TIMEOUT 1000 /* Timeout period in unit of time ticks */ -#define _SYNC_t HANDLE /* O/S dependent type of sync object. - e.g. HANDLE, OS_EVENT*, ID and etc.. */ -/* Include a header file here to define O/S system calls */ -/* #include <windows.h>, <ucos_ii.h.h>, <semphr.h> or ohters. */ - -/* The _FS_REENTRANT option switches the reentrancy of the FatFs module. -/ -/ 0: Disable reentrancy. _SYNC_t and _FS_TIMEOUT have no effect. -/ 1: Enable reentrancy. Also user provided synchronization handlers, -/ ff_req_grant, ff_rel_grant, ff_del_syncobj and ff_cre_syncobj -/ function must be added to the project. */ - -#define _FS_SHARE 0 /* 0:Disable or >=1:Enable */ -/* To enable file shareing feature, set _FS_SHARE to >= 1 and also user - provided memory handlers, ff_memalloc and ff_memfree function must be - added to the project. The value defines number of files can be opened - per volume. */ - +//Modified by Thomas Hamilton, Copyright 2010 + +/*---------------------------------------------------------------------------/ +/ FatFs - FAT file system module configuration file R0.08 (C)ChaN, 2010 / +/----------------------------------------------------------------------------/ +/ +/ CAUTION! Do not forget to make clean the project after any changes to +/ the configuration options. +/ +/---------------------------------------------------------------------------*/ + +#ifndef _FFCONF +#define _FFCONF 8085 /* Revision ID */ + +/*---------------------------------------------------------------------------/ +/ Function and Buffer Configurations / +/---------------------------------------------------------------------------*/ + +#define _FS_TINY 0 /* 0:Normal or 1:Tiny */ +/* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system +/ object instead of the sector buffer in the individual file object for file +/ data transfer. This reduces memory consumption 512 bytes each file object. */ + +#define _FS_READONLY 0 /* 0:Read/Write or 1:Read only */ +/* Setting _FS_READONLY to 1 defines read only configuration. This removes +/ writing functions, f_write, f_sync, f_unlink, f_mkdir, f_chmod, f_rename, +/ f_truncate and useless f_getfree. */ + +#define _FS_MINIMIZE 0 /* 0, 1, 2 or 3 */ +/* The _FS_MINIMIZE option defines minimization level to remove some functions. +/ +/ 0: Full function. +/ 1: f_stat, f_getfree, f_unlink, f_mkdir, f_chmod, f_truncate and f_rename +/ are removed. +/ 2: f_opendir and f_readdir are removed in addition to level 1. +/ 3: f_lseek is removed in addition to level 2. */ + +#define _USE_STRFUNC 2 /* 0:Disable or 1/2:Enable */ +/* To enable string functions, set _USE_STRFUNC to 1 or 2. */ + +#define _USE_MKFS 1 /* 0:Disable or 1:Enable */ +/* To enable f_mkfs function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */ + +#define _USE_FORWARD 0 /* 0:Disable or 1:Enable */ +/* To enable f_forward function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */ + +#define _USE_FASTSEEK 0 /* 0:Disable or 1:Enable */ +/* To enable fast seek feature, set _USE_FASTSEEK to 1. */ + +/*---------------------------------------------------------------------------/ +/ Locale and Namespace Configurations +/----------------------------------------------------------------------------*/ + +#define _CODE_PAGE 1 +/* The _CODE_PAGE specifies the OEM code page to be used on the target system. +/ Incorrect setting of the code page can cause a file open failure. +/ +/ 932 - Japanese Shift-JIS (DBCS, OEM, Windows) +/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows) +/ 949 - Korean (DBCS, OEM, Windows) +/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows) +/ 1250 - Central Europe (Windows) +/ 1251 - Cyrillic (Windows) +/ 1252 - Latin 1 (Windows) +/ 1253 - Greek (Windows) +/ 1254 - Turkish (Windows) +/ 1255 - Hebrew (Windows) +/ 1256 - Arabic (Windows) +/ 1257 - Baltic (Windows) +/ 1258 - Vietnam (OEM, Windows) +/ 437 - U.S. (OEM) +/ 720 - Arabic (OEM) +/ 737 - Greek (OEM) +/ 775 - Baltic (OEM) +/ 850 - Multilingual Latin 1 (OEM) +/ 858 - Multilingual Latin 1 + Euro (OEM) +/ 852 - Latin 2 (OEM) +/ 855 - Cyrillic (OEM) +/ 866 - Russian (OEM) +/ 857 - Turkish (OEM) +/ 862 - Hebrew (OEM) +/ 874 - Thai (OEM, Windows) +/ 1 - ASCII only (Valid for non LFN cfg.) */ + +#define _USE_LFN 0 /* 0 to 3 */ +#define _MAX_LFN 255 /* Maximum LFN length to handle (12 to 255) */ +/* The _USE_LFN option switches the LFN support. +/ +/ 0: Disable LFN. _MAX_LFN and _LFN_UNICODE have no effect. +/ 1: Enable LFN with static working buffer on the bss. NOT REENTRANT. +/ 2: Enable LFN with dynamic working buffer on the STACK. +/ 3: Enable LFN with dynamic working buffer on the HEAP. +/ +/ The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. When enable LFN, +/ Unicode handling functions ff_convert() and ff_wtoupper() must be added +/ to the project. When enable to use heap, memory control functions +/ ff_memalloc() and ff_memfree() must be added to the project. */ + +#define _LFN_UNICODE 0 /* 0:ANSI/OEM or 1:Unicode */ +/* To switch the character code set on FatFs API to Unicode, +/ enable LFN feature and set _LFN_UNICODE to 1. */ + +#define _FS_RPATH 0 /* 0:Disable or 1:Enable */ +/* When _FS_RPATH is set to 1, relative path feature is enabled and f_chdir, +/ f_chdrive function are available. +/ Note that output of the f_readdir fnction is affected by this option. */ + +/*---------------------------------------------------------------------------/ +/ Physical Drive Configurations +/----------------------------------------------------------------------------*/ + +#define _DRIVES 7 +/* Number of volumes (logical drives) to be used. */ + +#define _MAX_SS 512 /* 512, 1024, 2048 or 4096 */ +/* Maximum sector size to be handled. +/ Always set 512 for memory card and hard disk but a larger value may be +/ required for floppy disk (512/1024) and optical disk (512/2048). +/ When _MAX_SS is larger than 512, GET_SECTOR_SIZE command must be implememted +/ to the disk_ioctl function. */ + +#define _MULTI_PARTITION 0 /* 0:Single parition or 1:Multiple partition */ +/* When _MULTI_PARTITION is set to 0, each volume is bound to the same physical +/ drive number and can mount only first primaly partition. When it is set to 1, +/ each volume is tied to the partitions listed in Drives[]. */ + +/*---------------------------------------------------------------------------/ +/ System Configurations +/----------------------------------------------------------------------------*/ + +#define _WORD_ACCESS 0 /* 0 or 1 */ +/* Set 0 first and it is always compatible with all platforms. The _WORD_ACCESS +/ option defines which access method is used to the word data on the FAT volume. +/ +/ 0: Byte-by-byte access. +/ 1: Word access. Do not choose this unless following condition is met. +/ +/ When the byte order on the memory is big-endian or address miss-aligned word +/ access results incorrect behavior, the _WORD_ACCESS must be set to 0. +/ If it is not the case, the value can also be set to 1 to improve the +/ performance and code size. */ + +#define _FS_REENTRANT 0 /* 0:Disable or 1:Enable */ +#define _FS_TIMEOUT 1024 /* Timeout period in unit of time ticks */ +#define _SYNC_t HANDLE /* O/S dependent type of sync object. + e.g. HANDLE, OS_EVENT*, ID and etc.. */ +/* Include a header file here to define O/S system calls */ +/* #include <windows.h>, <ucos_ii.h.h>, <semphr.h> or ohters. */ + +/* The _FS_REENTRANT option switches the reentrancy of the FatFs module. +/ +/ 0: Disable reentrancy. _SYNC_t and _FS_TIMEOUT have no effect. +/ 1: Enable reentrancy. Also user provided synchronization handlers, +/ ff_req_grant, ff_rel_grant, ff_del_syncobj and ff_cre_syncobj +/ function must be added to the project. */ + +#define _FS_SHARE 0 /* 0:Disable or >=1:Enable */ +/* To enable file sharing feature, set _FS_SHARE to >= 1 and also user + provided memory handlers, ff_memalloc and ff_memfree function must be + added to the project. The value defines number of files can be opened + per volume. */ + #endif \ No newline at end of file