Diff: libs/LPC17xx/LPC17xxLib/inc/lpc17xx_spi.h

Revision:

2:1df0b61d3b5a

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/libs/LPC17xx/LPC17xxLib/inc/lpc17xx_spi.h	Fri Feb 28 18:52:52 2014 -0800
@@ -0,0 +1,322 @@
+/**********************************************************************
+* $Id$		lpc17xx_spi.h				2010-05-21
+*//**
+* @file		lpc17xx_spi.h
+* @brief	Contains all macro definitions and function prototypes
+* 			support for SPI firmware library on LPC17xx
+* @version	2.0
+* @date		21. May. 2010
+* @author	NXP MCU SW Application Team
+*
+* Copyright(C) 2010, NXP Semiconductor
+* All rights reserved.
+*
+***********************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
+**********************************************************************/
+
+/* Peripheral group ----------------------------------------------------------- */
+/** @defgroup SPI SPI (Serial Peripheral Interface)
+ * @ingroup LPC1700CMSIS_FwLib_Drivers
+ * @{
+ */
+
+#ifndef LPC17XX_SPI_H_
+#define LPC17XX_SPI_H_
+
+/* Includes ------------------------------------------------------------------- */
+#include "LPC17xx.h"
+#include "lpc_types.h"
+
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/* Public Macros -------------------------------------------------------------- */
+/** @defgroup SPI_Public_Macros SPI Public Macros
+ * @{
+ */
+
+/*********************************************************************//**
+ * SPI configuration parameter defines
+ **********************************************************************/
+/** Clock phase control bit */
+#define SPI_CPHA_FIRST			((uint32_t)(0))
+#define SPI_CPHA_SECOND			((uint32_t)(1<<3))
+
+/** Clock polarity control bit */
+#define SPI_CPOL_HI				((uint32_t)(0))
+#define SPI_CPOL_LO				((uint32_t)(1<<4))
+
+/** SPI master mode enable */
+#define SPI_SLAVE_MODE			((uint32_t)(0))
+#define SPI_MASTER_MODE			((uint32_t)(1<<5))
+
+/** LSB enable bit */
+#define SPI_DATA_MSB_FIRST		((uint32_t)(0))
+#define SPI_DATA_LSB_FIRST		((uint32_t)(1<<6))
+
+/** SPI data bit number defines */
+#define SPI_DATABIT_16		SPI_SPCR_BITS(0)		/*!< Databit number = 16 */
+#define SPI_DATABIT_8		SPI_SPCR_BITS(0x08) 	/*!< Databit number = 8 */
+#define SPI_DATABIT_9		SPI_SPCR_BITS(0x09) 	/*!< Databit number = 9 */
+#define SPI_DATABIT_10		SPI_SPCR_BITS(0x0A) 	/*!< Databit number = 10 */
+#define SPI_DATABIT_11		SPI_SPCR_BITS(0x0B) 	/*!< Databit number = 11 */
+#define SPI_DATABIT_12		SPI_SPCR_BITS(0x0C) 	/*!< Databit number = 12 */
+#define SPI_DATABIT_13		SPI_SPCR_BITS(0x0D) 	/*!< Databit number = 13 */
+#define SPI_DATABIT_14		SPI_SPCR_BITS(0x0E) 	/*!< Databit number = 14 */
+#define SPI_DATABIT_15		SPI_SPCR_BITS(0x0F) 	/*!< Databit number = 15 */
+
+/*********************************************************************//**
+ * SPI Status Flag defines
+ **********************************************************************/
+/** Slave abort */
+#define SPI_STAT_ABRT		SPI_SPSR_ABRT
+/** Mode fault */
+#define SPI_STAT_MODF		SPI_SPSR_MODF
+/** Read overrun */
+#define SPI_STAT_ROVR		SPI_SPSR_ROVR
+/** Write collision */
+#define SPI_STAT_WCOL		SPI_SPSR_WCOL
+/** SPI transfer complete flag */
+#define SPI_STAT_SPIF		SPI_SPSR_SPIF
+
+/* SPI Status Implementation definitions */
+#define SPI_STAT_DONE		(1UL<<8)		/**< Done */
+#define SPI_STAT_ERROR		(1UL<<9)		/**< Error */
+
+/**
+ * @}
+ */
+
+
+/* Private Macros ------------------------------------------------------------- */
+/** @defgroup SPI_Private_Macros SPI Private Macros
+ * @{
+ */
+
+/* --------------------- BIT DEFINITIONS -------------------------------------- */
+/*********************************************************************//**
+ * Macro defines for SPI Control Register
+ **********************************************************************/
+/** Bit enable, the SPI controller sends and receives the number
+ * of bits selected by bits 11:8 */
+#define SPI_SPCR_BIT_EN			((uint32_t)(1<<2))
+/** Clock phase control bit */
+#define SPI_SPCR_CPHA_SECOND	((uint32_t)(1<<3))
+/** Clock polarity control bit */
+#define SPI_SPCR_CPOL_LOW 		((uint32_t)(1<<4))
+/** SPI master mode enable */
+#define SPI_SPCR_MSTR		 	((uint32_t)(1<<5))
+/** LSB enable bit */
+#define SPI_SPCR_LSBF			((uint32_t)(1<<6))
+/** SPI interrupt enable bit */
+#define SPI_SPCR_SPIE			((uint32_t)(1<<7))
+/**  When bit 2 of this register is 1, this field controls the
+number of bits per transfer */
+#define SPI_SPCR_BITS(n)		((n==0) ? ((uint32_t)0) : ((uint32_t)((n&0x0F)<<8)))
+/** SPI Control bit mask */
+#define SPI_SPCR_BITMASK		((uint32_t)(0xFFC))
+
+/*********************************************************************//**
+ * Macro defines for  SPI Status Register
+ **********************************************************************/
+/** Slave abort */
+#define SPI_SPSR_ABRT		((uint32_t)(1<<3))
+/** Mode fault */
+#define SPI_SPSR_MODF		((uint32_t)(1<<4))
+/** Read overrun */
+#define SPI_SPSR_ROVR		((uint32_t)(1<<5))
+/** Write collision */
+#define SPI_SPSR_WCOL		((uint32_t)(1<<6))
+/** SPI transfer complete flag */
+#define SPI_SPSR_SPIF 		((uint32_t)(1<<7))
+/** SPI Status bit mask */
+#define SPI_SPSR_BITMASK	((uint32_t)(0xF8))
+
+/*********************************************************************//**
+ * Macro defines for SPI Data Register
+ **********************************************************************/
+/** SPI Data low bit-mask */
+#define SPI_SPDR_LO_MASK	((uint32_t)(0xFF))
+/** SPI Data high bit-mask */
+#define SPI_SPDR_HI_MASK	((uint32_t)(0xFF00))
+/** SPI Data bit-mask */
+#define SPI_SPDR_BITMASK	((uint32_t)(0xFFFF))
+
+/*********************************************************************//**
+ * Macro defines for SPI Clock Counter Register
+ **********************************************************************/
+/** SPI clock counter setting */
+#define SPI_SPCCR_COUNTER(n) 	((uint32_t)(n&0xFF))
+/** SPI clock counter bit-mask */
+#define SPI_SPCCR_BITMASK		((uint32_t)(0xFF))
+
+/***********************************************************************
+ * Macro defines for SPI Test Control Register
+ **********************************************************************/
+/** SPI Test bit */
+#define SPI_SPTCR_TEST_MASK	((uint32_t)(0xFE))
+/** SPI Test register bit mask */
+#define SPI_SPTCR_BITMASK	((uint32_t)(0xFE))
+
+/*********************************************************************//**
+ * Macro defines for SPI Test Status Register
+ **********************************************************************/
+/** Slave abort */
+#define SPI_SPTSR_ABRT		((uint32_t)(1<<3))
+/** Mode fault */
+#define SPI_SPTSR_MODF		((uint32_t)(1<<4))
+/** Read overrun */
+#define SPI_SPTSR_ROVR		((uint32_t)(1<<5))
+/** Write collision */
+#define SPI_SPTSR_WCOL		((uint32_t)(1<<6))
+/** SPI transfer complete flag */
+#define SPI_SPTSR_SPIF 		((uint32_t)(1<<7))
+/** SPI Status bit mask */
+#define SPI_SPTSR_MASKBIT	((uint32_t)(0xF8))
+
+/*********************************************************************//**
+ * Macro defines for SPI Interrupt Register
+ **********************************************************************/
+/** SPI interrupt flag */
+#define SPI_SPINT_INTFLAG 	((uint32_t)(1<<0))
+/** SPI interrupt register bit mask */
+#define SPI_SPINT_BITMASK 	((uint32_t)(0x01))
+
+
+/* ---------------- CHECK PARAMETER DEFINITIONS ---------------------------- */
+/** Macro to determine if it is valid SPI port number */
+#define PARAM_SPIx(n)	(((uint32_t *)n)==((uint32_t *)LPC_SPI))
+
+/** Macro check Clock phase control mode */
+#define PARAM_SPI_CPHA(n) 	((n==SPI_CPHA_FIRST) || (n==SPI_CPHA_SECOND))
+
+/** Macro check Clock polarity control mode */
+#define PARAM_SPI_CPOL(n)	((n==SPI_CPOL_HI) || (n==SPI_CPOL_LO))
+
+/** Macro check master/slave mode */
+#define PARAM_SPI_MODE(n)	((n==SPI_SLAVE_MODE) || (n==SPI_MASTER_MODE))
+
+/** Macro check LSB/MSB mode */
+#define PARAM_SPI_DATA_ORDER(n) ((n==SPI_DATA_MSB_FIRST) || (n==SPI_DATA_LSB_FIRST))
+
+/** Macro check databit value */
+#define PARAM_SPI_DATABIT(n)	((n==SPI_DATABIT_16) || (n==SPI_DATABIT_8) \
+|| (n==SPI_DATABIT_9) || (n==SPI_DATABIT_10) \
+|| (n==SPI_DATABIT_11) || (n==SPI_DATABIT_12) \
+|| (n==SPI_DATABIT_13) || (n==SPI_DATABIT_14) \
+|| (n==SPI_DATABIT_15))
+
+/** Macro check status flag */
+#define PARAM_SPI_STAT(n)	((n==SPI_STAT_ABRT) || (n==SPI_STAT_MODF) \
+|| (n==SPI_STAT_ROVR) || (n==SPI_STAT_WCOL) \
+|| (n==SPI_STAT_SPIF))
+
+/**
+ * @}
+ */
+
+
+/* Public Types --------------------------------------------------------------- */
+/** @defgroup SPI_Public_Types SPI Public Types
+ * @{
+ */
+
+/** @brief SPI configuration structure */
+typedef struct {
+	uint32_t Databit; 		/** Databit number, should be SPI_DATABIT_x,
+							where x is in range from 8 - 16 */
+	uint32_t CPHA;			/** Clock phase, should be:
+							- SPI_CPHA_FIRST: first clock edge
+							- SPI_CPHA_SECOND: second clock edge */
+	uint32_t CPOL;			/** Clock polarity, should be:
+							- SPI_CPOL_HI: high level
+							- SPI_CPOL_LO: low level */
+	uint32_t Mode;			/** SPI mode, should be:
+							- SPI_MASTER_MODE: Master mode
+							- SPI_SLAVE_MODE: Slave mode */
+	uint32_t DataOrder;		/** Data order, should be:
+							- SPI_DATA_MSB_FIRST: MSB first
+							- SPI_DATA_LSB_FIRST: LSB first */
+	uint32_t ClockRate;		/** Clock rate,in Hz, should not exceed
+							(SPI peripheral clock)/8 */
+} SPI_CFG_Type;
+
+
+/**
+ * @brief SPI Transfer Type definitions
+ */
+typedef enum {
+	SPI_TRANSFER_POLLING = 0,	/**< Polling transfer */
+	SPI_TRANSFER_INTERRUPT		/**< Interrupt transfer */
+} SPI_TRANSFER_Type;
+
+/**
+ * @brief SPI Data configuration structure definitions
+ */
+typedef struct {
+	void *tx_data;				/**< Pointer to transmit data */
+	void *rx_data;				/**< Pointer to transmit data */
+	uint32_t length;			/**< Length of transfer data */
+	uint32_t counter;			/**< Data counter index */
+	uint32_t status;			/**< Current status of SPI activity */
+} SPI_DATA_SETUP_Type;
+
+/**
+ * @}
+ */
+
+
+/* Public Functions ----------------------------------------------------------- */
+/** @defgroup SPI_Public_Functions SPI Public Functions
+ * @{
+ */
+
+/* SPI Init/DeInit functions ---------*/
+void SPI_Init(LPC_SPI_TypeDef *SPIx, SPI_CFG_Type *SPI_ConfigStruct);
+void SPI_DeInit(LPC_SPI_TypeDef *SPIx);
+void SPI_SetClock (LPC_SPI_TypeDef *SPIx, uint32_t target_clock);
+void SPI_ConfigStructInit(SPI_CFG_Type *SPI_InitStruct);
+
+/* SPI transfer functions ------------*/
+void SPI_SendData(LPC_SPI_TypeDef *SPIx, uint16_t Data);
+uint16_t SPI_ReceiveData(LPC_SPI_TypeDef *SPIx);
+int32_t SPI_ReadWrite (LPC_SPI_TypeDef *SPIx, SPI_DATA_SETUP_Type *dataCfg, SPI_TRANSFER_Type xfType);
+
+/* SPI Interrupt functions ---------*/
+void SPI_IntCmd(LPC_SPI_TypeDef *SPIx, FunctionalState NewState);
+IntStatus SPI_GetIntStatus (LPC_SPI_TypeDef *SPIx);
+void SPI_ClearIntPending(LPC_SPI_TypeDef *SPIx);
+
+/* SPI get information functions-----*/
+uint8_t SPI_GetDataSize (LPC_SPI_TypeDef *SPIx);
+uint32_t SPI_GetStatus(LPC_SPI_TypeDef *SPIx);
+FlagStatus SPI_CheckStatus (uint32_t inputSPIStatus,  uint8_t SPIStatus);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* LPC17XX_SPI_H_ */
+
+/**
+ * @}
+ */
+
+/* --------------------------------- End Of File ------------------------------ */